Adobe Forms: how to avoid blank pages in the output

Hi Guys,
when i am executing a report using adobe forms for limited records i can see the output in single page in pdf without any blank pages before or after the output page.But if the records exceed then in the output i can see first 3 blank pages and then in the 4th page i can see the printed output only with the limited records .Can u tell me why this is happening.
Thanks.
Jagadeesh
Moderator message: wrong forum, please have a look in the forum for "Adobe Interactive Forms".
Edited by: Thomas Zloch on May 18, 2011 2:06 PM

Usually blank pages appear as first page due to the presence of filler lines (//////) on top of report header.Please ensure that the top header is exactely started from top of page itself.

Similar Messages

How to avoid blank page in the report?

adding a field in the grouping and checking the page break option means then we are getting blank page as the first page of the report? How to avoid this blank page?

Usually blank pages appear as first page due to the presence of filler lines (//////) on top of report header.Please ensure that the top header is exactely started from top of page itself.

How to avoid blank page in BI Publisher

Hi,
I am doing an invoice print using XML Publisher and there is a xml tag which stores whether I should suppress the invoice from printing or not.
I am checking for this flag in the template and then printing the data. So when a situation comes that the flag is Y - I am not getting any contents (Which is correct) - but I am getting a blank page in the output on that page. I would need to avoid that - Is there a way I can do this.
My template code for the suppress bit currently is,
<?for-each@section:G_CONS_INV_NUMBER?>
<?if:CP_SUPPRESS_INV_FLAG!='Y'?>
-- here comes my contents and logos ---
<?end if?>
<?end for-each?>
The suppress is happening but in the output I am getting a blank page
Thanks
Shasikkumar

Hi I have a dunning letter template where I have different templates for reminder letter, 30, 60 . I have one template for all these letters where I am checking for
<?for-each:G_CORRESPONDENCES?>
<?for-each:G_CUST_ACCOUNT_ROLE_ID?>
<?if:CLASS="INV"?> <?if:DAYS_LATE >=1?> <?if:DAYS_LATE <=30?>
when i run the report if there is only 60 days letter exists and no reminder and 30 day letters then i get a blank page printed.
can any one guide me . I can provide the sample template. if needed.
thanks
lira.

How to avoid blank column display in output in ALV TREE

how to avoid blank column display in output while decreasing the length of other columns in ALV Tree.
Example: please refer to BCALV_TREE_01 and see the output, then decrease the length of all columns . Then you can see a blank column appearing in screen at last, i.e in container. so how to avoid that.
Thanks for reply.
Edited by: morpeous on Jul 1, 2009 1:53 PM

Hi,
Check BCALV_TREE_02 on how to hide columns.
Thanks & Regards,
Anand Patil

How to Avoid blank page in SAP Script

I am working on a Script. My Script prints a check.
This script is a copy of a std script.
It has 3 pages - First Next Last
My First page has all the required data.
My second page is empty with out any values.
I am getting the blank page as Page 2 when executing. How can we avoid it ?
Senthil

Hi Senthil,
Please see the below points:
1. Please check what have you defined as the NEXT PAGE for your first page. If so change it and make the first page itself as the next page.
2. Check your main Window, may be there is blank line at the last of the main window, so check that abd remove that,so you won't get the blank page
Please see the link which is similar to your problem:
Re: How to remove blank page in sap script
May it helps you.
Regards.
Deepak Sharma.

How to avoid blank page in last page?

Hi friends,
I have one page layout in my RTF file for Invoice printing. But when submitting the concurrent from Apps, it is showing one page output and one blank page at the end of the output.
How can i restrict the blank page.. Pl. help.
Thanks
Kavi

If you are using page break, have it conditionally like
<?if:position()!=last()?><?split-by-page-break:?><?end if?>

How to Avoid Blank Page in XML Publisher oracle report

Hi,
I am running a report in xml publisher. The output of the report prints 2
pages, one page with correct report output and other page is a blank page
with header details.
I want to avoid this blank page. Is there something wrong? Please help to fix this issue!
Thanks!

I am running a report in xml publisher. The output of the report prints 2
pages, one page with correct report output and other page is a blank page
with header details.
I want to avoid this blank page. Is there something wrong? Please help to fix this issue!Is the issue with this specific XML Publisher report only?
Do you have all the patches in (Overview of Available Patches for Oracle XML Publisher embedded in the Oracle E-Business Suite [ID 1138602.1]) applied? -- Search for "blank page".
Thanks,
Hussein

How to avoid blank page in xml publisher report

hi,
i have a xml report, it shows 7 rows in one page. the question is: if there are just 7 rows , when previews with pdf, it will generate 2 pages, the first page shows 7 rows, and the second page is blank.
anyone can help?
you can get the rar file that contains the .rtf and then .xml file at this site: [http://www.4shared.com/file/azhdqCp_/DELIVERY.html]

I am running a report in xml publisher. The output of the report prints 2
pages, one page with correct report output and other page is a blank page
with header details.
I want to avoid this blank page. Is there something wrong? Please help to fix this issue!Is the issue with this specific XML Publisher report only?
Do you have all the patches in (Overview of Available Patches for Oracle XML Publisher embedded in the Oracle E-Business Suite [ID 1138602.1]) applied? -- Search for "blank page".
Thanks,
Hussein

How to create multiple pages in the output file?

hi, we have an application (C++) that generates PDF output. I've been asked to figure out how to create multiple copies of each page (uncollated). i.e. the output would be 4 copies of p 1 followed by 4 copies of p 2, etc. I'd like to do this without actually replicating each page if possible ... any ideas?

Why not just put four copies of the same CosObj reference into the Pages array/tree?

Query regarding displaying of a blank page on the output of an invoice

hi All,
I am facing a problem in both my development and staging servers. Whenever a print preview of an invoice is seen, there are 3 pages getting displayed (depending on the data) with one BLANK PAGE between 2 pages having data ie., First page has the data, second page is blank and third page has some data again.
Now its very strange and i could not understand why this problem is arising.
I had debugged the invoice SAPScript, but culd not find the issue,. Can anyone please help me out in this regard.
Regards
Priya

hi!
hav u assigned the next page for ur first page as wanted.....
or u r calling two pages explicitly by new-page then check the page assigned and check for spaces in ur program.....

How to remove blank pages from report

Hi All
i have a condition where i have to display the record only when trxn lines are available for that record ,inside my for each group condition i put the if condition having a count variable so if count is not zero then only the record will be displayed ,it works but problem is it shows blank pages for those records.
any clue would be very helpful.Thanks in advance
Thanks
Pratap

Hi All
The solution of this issue is given in below mentioned thread
How to avoid blank page in BI Publisher
Thanks a lot to Vestrini :)
Thanks
Pratap

Problem with a blank page at the end.

Hi,
I have a report. That comes up with a blank page at the end of the report when the report generates the output in the report builder. Also in pdf file.
It was created by somebody earlier... and i need to fix this bug.
Any solutions..?
Thanks in advance.
KK
Message was edited by:
KK28

Hi
there are a number of hits on Metalink for this...
Subject:      Extra Page Shown At The End Of A Web Report
     Doc ID:      Note:172426.1      Type:      PROBLEM
     Last Revision Date:      04-JAN-2005      Status:      ARCHIVED
* fact: Oracle Reports Developer 6.0.5
* fact: Solaris Operating System (SPARC)
* fact: Microsoft Internet Explorer
* fact: Adobe Acrobat
* fact: OAS
* symptom: Extra Page Displayed At The End Of A Report Viewed on the Web
* symptom: Only happens on one report
* symptom: Using Times New Roman
* symptom: Client/Server configuration works successfully
* change: Report originally created for client/server application was moved to a web application without making any coding changes in the report.
* cause: Bug 1386820 : HTML GENERATED ON NT AND UNIX IS DIFFERENT. ADDITIONAL BLANK LINES ON UNIX
fix:
Use the Report Builder on Unix to make fine adjustments in the layout to
improve the HTML output.
-----x------------------
Subject:      How to set the number of rows per page dynamically in a report
     Doc ID:      Note:122714.1      Type:      SCRIPT
     Last Revision Date:      07-NOV-2000      Status:      PUBLISHED
PURPOSE
This article shows how to set the number of rows per page dynamically according
to the user parameter specified.
INSTRUCTIONS
Follow these steps:
1. In the Object Navigator under Data Model-->User Parameters, create an user
parameter P_1 -- this parameter specifies the number of rows you want to
print per page
datatype: number.
2. In the Data Model Editor, create the query and the layout according to your
requirements.
Let's assume that we have the following:
Q_1: Select empno, deptno ename from emp
order by deptno, ename
G_1 has the columns empno, deptno, ename
3. In the Data Model Editor, create the following summary columns:
CS_numrow will be numbering the rows within the detail group
(created within G_1).
Set the following parameters:
Name: CS_numrow
Function: count
Source: <any column that does not accept nulls> for instance, empno
Reset at: Report
CS_total_rows will calculate the total of rows retrieved
(created at the report level)
Set the following parameters:
Name: CS_total_rows
Function: count
Source: <any column that does not accept nulls> for instance, empno
Reset at: Report
4. In the Layout Model Editor, create a Group Frame M_1 within the repeating
frame, below the fields empno, deptno, and ename. You may have to stretch
the existing frames to be able to fit this in.
F_enmpno F_deptno F_ename
--------------------------------------------- <<<< create the group
frame here
5. Set the properties for the Group Frame M_1 as follows:
Print condition: First
Object: Enclosing Object
Sizing:
Vertical: variable
Horizontal: fixed
Check the box "Page Break before".
6. Create a Format trigger for this frame M_1 as follows:
function M_1FormatTrigger return boolean is
/* prints until a row number is product of P_1 */
/* if row number is 5 and P_1 = 5, MOD is 0 */
/* then it prints the frame, doing a page break */
begin
if :CS_total_rows <> :CS_numrow then -- avoiding blank page at the end
if mod(:CS_numrow,:P_1) = 0 then
return (TRUE);
else
return(false);
end if;
else
return (false);
end if;
end;
NOTE: This assumes that the report is tabular. If you have a break group, this
logic can be applied for the detail group.
REFERENCES
Information in this article was taken from Oracle Sample Code @ Repository
Entry #956. In order to request the binary (rdf file or .sql script), please
log a TAR via Metalink requesting Oracle Sample Code #956
CAUTION
The sample program in this article is provided for educational purposes only
and is NOT supported by Oracle Support Services. It has been tested
internally, however, and works as documented. We do not guarantee that it
will work for you, so be sure to test it in your environment before relying
on it.
-------x-------------
the list goes on...
Hope this helps

How to add blank page to existing Document In Adobe Dc

how to add blank page to existing Document In Adobe Dc Pro

Hi thashrifs16749461,
You can add a blank page using Adobe Acrobat DC by following the below instructions :-
1) Open your existing pdf document in Acrobat DC.
2) Choose the 'Organize Page' option form the Tools pane on the right as shown below in the screen shoot.
3) Now at the top you will see all the tools to Organize the page, Click on 'Insert' & select 'Blank Page' from the drop-down to insert blank pages.
*Shortcut : If you are using windows computer you can use ' Shift+Ctrl+T ' key to insert blank pages.
In case if you experience any issue or have any query please let us know. We will be happy to help you.
Regards,
Aadesh

I am creating a form, it shows 1 page, but when I save it as a PDF Form there are 2 pages, 1 is blank. How do I get rid of the blank page in the form?

I am creating a form, it shows 1 page, but when I save it as a PDF Form there are 2 pages, 1 is blank. How do I get rid of the blank page in the form?

Hi,
You may open the original form in FormsCentral and toggle to “Page View” at the lower right corner. Adjust the page content to make sure no page breaks in this view.
Thanks,
Wenlan

How to avoid printing an additional blank page at the end of the report

I have a report which has 3 panels in the main section of the report, about 3 pages in size. 1st & 2nd panels are enclosed in a repeating frame, and 3rd panel in a different repeating frame.
The vertical panels per page in the property inspector of the main section of the report is kept as 2. And thus, when I am printing the report I am getting an additional blank page at the end. Also I tried to make the vertical panels per page to 1 in the property inspector for main section but the following error is being returned:
REP-0801: Layout canvas must remain large enough to fit all layout objects
Can anyone tell me how to handle this?

Hi,
I too faced similar prob.
But when i made the After Page Value property of the report as blank it removed the blank page for me .
Try this and let me know whether it has helped you.
Regards
Srinivas Pusa

Adobe Forms: how to avoid blank pages in the output

Similar Messages

Maybe you are looking for