Adobe Forms in Portal and the standard Code of Conduct
Hi All,
We have ECC6 Portal 7 Adobe Reader 7.0.8 Adobe Lifecycle and its all working.
- In R3, I have Copied the standard scenario SECC in QISSCENARIOS to ZECC
- In R3, Changed and activate the form and interface there or in SFP
- In the Portal, I can copy either the Code of Conduct iView or the IsrForm iView.
- Now the ISR Cookbook says that i must add 'PCD parameters scenario and mode'...but it doesn't say what to add them to or what the format is. Or what the values of mode might be. My scenario is called ZECC to I have tried putting scenario=ZECC into the Application Parameters of the iView and into the Parameters to Pass from Page of the iView. NOTHING.
Any ideas?
Thanks & Regards,
Jimmy.
Hi,
Well,I think you have done the required stuff from ECC side. But now for EP side, you got to create a new <b>Java Webdynpro IView</b> with the following Details...
NameSpace : <b>sap.com/pcui_gp~isr</b>
Application Name : <b>IsrForm</b>
Application Parameters : <b>SCENARIO=ZECC&MODE=CREATE&sap.xss.disablehdr=True</b>
And test the IView individually.
Let us know if it still gives you some problem.
Regards,
<i><b>Raja Sekhar</b></i><b></b>
Similar Messages
-
I cannot get Elements 13.1 to download completely. I have 3 different case numbers from Adobe and nothing helps. I always get the "download failed" and the error code u44m1i210. I would either like to get the product downloaded or eliminate the constant attempt which just ties up my computer.
You could try the direct download links here
Adobe Photoshop Elements 13 Direct Download Links, Premiere too | ProDesignTools
And here is some info on that error code
Error U44M1I210 | Install updates -
Standard prgram and the standard form for the AR Bill of Exchange
I need to configure AR Program for Bank bills and Bill of Exchange. This configuration is for France.
Can you let me knoe the standard prgram and the standard form for the same.
Regards,
SenthilHello,
You can refer to the below sap help link whcih describes about the Bill of exchange understanding in sap
http://help.sap.com/printdocu/core/print46c/en/data/pdf/FIBP/FI-AP-AP-BE.pdf
http://help.sap.com/saphelp_45b/helpdata/de/e8/f0c10a0a6911d294f200a0c929f4c9/frameset.htm
Alternatively you can also check the customizing settings for the BOE which details on the settings needed foractivating of BOE
hope this helps
regards,
radhika -
I have just upgraded to PSE 12 and Premier E 12, and tried to installed many times. The pop up says "Configuration Error"; contact Adobe Tech Support(?); and "mention error code 1"! Help please!
Install appeared to run okay up to,, and including "shared Technologies"....Troubleshoot installation | Photoshop Elements, Premiere Elements | Windows
-
Can I use "Adobe X Pro" to debug the java code in adobe forms?
HI,
Can I use "Adobe X Pro" to debug the java code in adobe forms?, if not how do i debug the java code written in the adobe form.I have the adobe acrobat x evaluation version installed, please find the print shot attached, I have pressed CTRL+J in the preview mode, but nothing came up.
Am I doing something wrong.. -
No Adobe Form Is Assigned to the Scenario: - PCR
Hi,
In my project, configured 5 Custom PCRs as copy of standard PCR and enhace it. When Full authorization USer ids, am able to execute the all PCR-Adobe form and complete the process.
When i logo to portal with Z role authorization (with respect to Client), am bale to execute only 3 PCR and remaining 2 PCS display the following error message.
Critical Error
A critical error has occured. Processing of the service was terminated. Unsaved data has been lost.
Contact your system administrator.
No Adobe Form Is Assigned to the Scenario
com.sap.pcuigp.xssfpm.java.FPMRuntimeException: No Adobe Form Is Assigned to the Scenario
at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:112)
at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEvent.raiseExceptions(FcISRProcessEvent.java:1981)
at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEvent.callRFCIsrGetFormUrl(FcISRProcessEvent.java:1043)
at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEvent.setTemplateSource(FcISRProcessEvent.java:460)
at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEvent.callRFCIsrProcessEvent(FcISRProcessEvent.java:799)
at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEvent.callIsrProcessEvent(FcISRProcessEvent.java:381)
at com.sap.pcui_gp.isr.isrprocessevent.wdp.InternalFcISRProcessEvent.callIsrProcessEvent(InternalFcISRProcessEvent.java:1234)
at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEventInterface.callIsrProcessEvent(FcISRProcessEventInterface.java:127)
at com.sap.pcui_gp.isr.isrprocessevent.wdp.InternalFcISRProcessEventInterface.callIsrProcessEvent(InternalFcISRProcessEventInterface.java:409)
at com.sap.pcui_gp.isr.isrprocessevent.wdp.InternalFcISRProcessEventInterface$External.callIsrProcessEvent(InternalFcISRProcessEventInterface.java:577)
at com.sap.pcui_gp.isr.isrprocessevent.showform.VcISRShowForm.onBeforeOutput(VcISRShowForm.java:216
Provide your inputs plsHey Hi,
IF you are familiar with authorizations in PFCG trabsaction you are finaliar with S_DEVELOP if not ask the authorization team on your project.
Basically this authorization object handles the read/write etc authorization related to devlopment objects. If you implement Adobe forms you will probably develop your own forms or at least copy the SAP forms to customer namespace.
For Adobe you will therefore have 2 custom development objects (1 for the form and 1 for the interface that is automatically generated). The end-user shoulf have at least READ access to these objects. If not the portal will trow an error on this.
To determine the tech names of the objects find the form and related interface in transaction SFP. These should be inserted in the object S_DEVELOP in the role for the end users.
You may want to consider to put the value Z* in the object which will give authorization for all the custom developed objects.
If you can't find the object reply again and i will send a screenshot.
Finally, make use of the splended transaction ST01!! It will make your life a lot more easy in portal! It traces all the authorizations needed and missing for any user you specify. After activating the trace and running a portal scenario the log will tell you want went OK and what not on an authorization object level. -
No Adobe Form Is Assigned to the Scenario -ERROR
Hi All,
I configured the ADS server and was able to display the test Adobe Forms and test the forms successfully in ECC and Portal side.
(We are using ERP 2005 and EP 7.0 of NW2004s)
However when I tried to test the PCR forms in MSS, I get the following error.
Also I WAS ABLE TO DISPLAY the forms when I had SAP_ALL autorizations at the backend ECC system. But when I remove the SAP_All and provide with all the ESS/MSS authorization with all the needed RFC authorizations, I'm unable to display the forms. Can anyone please help me resolve this issue.
<b>com.sap.pcuigp.xssfpm.java.FPMRuntimeException: No Adobe Form Is Assigned to the Scenario</b>
at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:111)
at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEvent.raiseExceptions(FcISRProcessEvent.java:1819)
at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEvent.callRFCIsrGetFormUrl(FcISRProcessEvent.java:935)
at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEvent.setTemplateSource(FcISRProcessEvent.java:373)
at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEvent.callRFCIsrProcessEvent(FcISRProcessEvent.java:699)
at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEvent.callIsrProcessEvent(FcISRProcessEvent.java:294)
at com.sap.pcui_gp.isr.isrprocessevent.wdp.InternalFcISRProcessEvent.callIsrProcessEvent(InternalFcISRProcessEvent.java:1178)
at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEventInterface.callIsrProcessEvent(FcISRProcessEventInterface.java:127)
at com.sap.pcui_gp.isr.isrprocessevent.wdp.InternalFcISRProcessEventInterface.callIsrProcessEvent(InternalFcISRProcessEventInterface.java:386)
at com.sap.pcui_gp.isr.isrprocessevent.wdp.InternalFcISRProcessEventInterface$External.callIsrProcessEvent(InternalFcISRProcessEventInterface.java:546)
at com.sap.pcui_gp.isr.isrprocessevent.showform.VcISRShowForm.onBeforeOutput(VcISRShowForm.java:215)
at com.sap.pcui_gp.isr.isrprocessevent.showform.wdp.InternalVcISRShowForm.onBeforeOutput(InternalVcISRShowForm.java:412)
at com.sap.pcui_gp.isr.isrprocessevent.showform.VcISRShowFormInterface.onBeforeOutput(VcISRShowFormInterface.java:137)
at com.sap.pcui_gp.isr.isrprocessevent.showform.wdp.InternalVcISRShowFormInterface.onBeforeOutput(InternalVcISRShowFormInterface.java:136)
at com.sap.pcui_gp.isr.isrprocessevent.showform.wdp.InternalVcISRShowFormInterface$External.onBeforeOutput(InternalVcISRShowFormInterface.java:212)
at com.sap.pcuigp.xssfpm.wd.FPMComponent.callOnBeforeOutput(FPMComponent.java:654)
at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:619)
at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:474)
at com.sap.pcuigp.xssfpm.wd.FPMComponent.access$600(FPMComponent.java:87)
at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.raiseEvent(FPMComponent.java:1038)
at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.raiseEvent(FPMComponent.java:1250)
at com.sap.xss.hr.pcr.selectform.VcPcrSelectForm.toShowForm(VcPcrSelectForm.java:227)
at com.sap.xss.hr.pcr.selectform.wdp.InternalVcPcrSelectForm.toShowForm(InternalVcPcrSelectForm.java:190)
at com.sap.xss.hr.pcr.selectform.SelectForm.onActionToShowForm(SelectForm.java:143)
at com.sap.xss.hr.pcr.selectform.wdp.InternalSelectForm.wdInvokeEventHandler(InternalSelectForm.java:172)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:731)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:667)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:232)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:879)
at com.sap.tc.webdynpro.portal.pb.impl.localwd.LocalApplicationProxy.sendDataAndProcessAction(LocalApplicationProxy.java:77)
at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1291)
at com.sap.portal.pb.PageBuilder.SendDataAndProcessAction(PageBuilder.java:325)
at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:831)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:755)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:717)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:136)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:711)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:665)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:232)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Thanks,
Regards
MadhuHi Madhu,
Please check if ICM is configured properly through the transaction SMICM.
please refer the thread - Re: ISR service error :No Adobe Form Is Assigned to the Scenario...
Do update, onceyou have solved the solution.
Thanks and Regards,
Anto. -
ISR service error :No Adobe Form Is Assigned to the Scenario...
Hi Gurus,
I am getting this error when I try to run any of the ISR based scenarios like Code of Conduct service, PCR etc..
com.sap.pcuigp.xssfpm.java.FPMRuntimeException: No Adobe Form Is Assigned to the Scenario
at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:111)
at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEvent.raiseExceptions(FcISRProcessEvent.java:1948)
at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEvent.callRFCIsrGetFormUrl(FcISRProcessEvent.java:1042)
at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEvent.setTemplateSource(FcISRProcessEvent.java:459)
at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEvent.callRFCIsrProcessEvent(FcISRProcessEvent.java:798)
at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEvent.callIsrProcessEvent(FcISRProcessEvent.java:380)
at com.sap.pcui_gp.isr.isrprocessevent.wdp.InternalFcISRProcessEvent.callIsrProcessEvent(InternalFcISRProcessEvent.java:1234)
at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEventInterface.callIsrProcessEvent(FcISRProcessEventInterface.java:127)
at com.sap.pcui_gp.isr.isrprocessevent.wdp.InternalFcISRProcessEventInterface.callIsrProcessEvent(InternalFcISRProcessEventInterface.java:409)
at com.sap.pcui_gp.isr.isrprocessevent.wdp.InternalFcISRProcessEventInterface$External.callIsrProcessEvent(InternalFcISRProcessEventInterface.java:577)
at com.sap.pcui_gp.isr.isrprocessevent.showform.VcISRShowForm.onBeforeOutput(VcISRShowForm.java:215)
at com.sap.pcui_gp.isr.isrprocessevent.showform.wdp.InternalVcISRShowForm.onBeforeOutput(InternalVcISRShowForm.java:435)
at com.sap.pcui_gp.isr.isrprocessevent.showform.VcISRShowFormInterface.onBeforeOutput(VcISRShowFormInterface.java:137)
at com.sap.pcui_gp.isr.isrprocessevent.showform.wdp.InternalVcISRShowFormInterface.onBeforeOutput(InternalVcISRShowFormInterface.java:136)
at com.sap.pcui_gp.isr.isrprocessevent.showform.wdp.InternalVcISRShowFormInterface$External.onBeforeOutput(InternalVcISRShowFormInterface.java:212)
at com.sap.pcuigp.xssfpm.wd.FPMComponent.callOnBeforeOutput(FPMComponent.java:602)
at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:568)
at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:437)
at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:195)
at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
Pls do let me know how to solve this problem.
I tried the configuration checks in the manuals..
The Webservice check returned the correct version of the Adobe version running..
But the program test FP_PDF_test_00 retuen an SOAP error..
I have maintained detinations in the java visual admin
with url : http://abapserverhostname:8000
and user as ADS_AGENT password as in abap system.
Pls tell me how should I solve my problem.
helpfull answers will be greatly awarded...
Regards,
RameshHi Raja,
the basis have solved the problem and the configuration checks for ADS are succesful now.
Now i try to create change the code of conduct application iview change the name space to
sap.com/pcgui~isr(dont mind the spelling i have given the right component)
application name= IsrForm
application parmetrs = (given according to older thread messages)
but nothing is coming up. I get the Ie message saying
Security settings does not allow page to be displayed correctly and only a "cross" icon is appearing at the top of the page..
Pls tell me what should i do now..
Regards,
ramesh -
Hi Experts,
My requirement is i need to create the interactive adobe form and this adobe form is finally accessed through portal and there are some approval process involved in this scenario. Now my doubt is do i need to create the adobe form through webdynpro stack or can i create the form and interface directly in transaction "SFP". If i create the form using SAP GUI is it possible to access such forms through portal. I need your suggestions and comments on this.
Finally my doubt is can we access the interactive adobe forms which are developed in transaction "SFP" through portal, and my print program also exists in the ABAP editor which has logic to fetch and display the data into adobe forms.
or do we need web dynpro application to access the interactive adobe form through portal.
Your help will be greatly appreciated.
Regards,
VenkatAnto,
Thanks for the info, actual my requirment is when ever user login into portal he will find list of purchase orders then in the object work list(OWL). He will choose one record and click edit button then the adobe form corresponding to that purchase order should open in edit mode, now here my question is how can my print program in SAP GUI know that the user has choosen particular purchase order, i will fetch the data based on my selection criteria and i can display data according to that, but how can i display the data in edit mode when the user has choosen some record from OWL.
For example : if user selects purchase order 123 from object work list then the same purchase order 123 header and item details should open in the adobe form in edit mode. If my application is developed in SAP GUI side then how can my application program fetch the data related to pirchase order 123 in portal. When i write an ABAP program i will write the logic to fetch and display the data according to my selection criteria, i am unware of what is happening at protal side how can one map my selection criteria details to the record selected in object work list, is this possible , if not what is the alternative way. kindly suggest
For such type of requirement, what exactly need to be done either web dynpro interactive form or SAP GUI interactive form.
Or both scenario's also possible. Kindly suggest.
How can we achieve this using web dynpro application or SAP GUI application.
Your help will be greatly appreciated.
Regards,
Venkat -
No Adobe Form Is Assigned to the Scenario
Hi Experts,
i am getting following error in the PCR application in MSS
"No Adobe Form Is Assigned to the Scenario"
we are on ECC 6.0 EP 7.0 MSS BP 1.0
we have configured ADS. and the service is running properly in development and quality server.
I have checked the SPRO nodes Define scenarios and all.
there i have assigned my z form name correctly to the scenario.
i did check the blog in the portal development which points to the same error but it is unanswered.
my ADS is running fine as i am able to my other adobe form developments correctly.
please guide on the error i am just clue less on this.
Regards,
Umesh ChaudhariHi Umesh,
Please follow the steps mentioned in the notes below.
959462 ISR/Adobe/Web Dynpro Java: Configuration problems
836174 ISR/Adobe/Web Dynpro Java: Support for troubleshoot
Hope the above steps should help.
Best Regards,
Deepak... -
<u><i><b>Adobe Forms in Portal</b></i></u>
<i>Manager Self Service:</i>
Say suppose i want to integrate "Change Personnel Area and Sub Area" into Portal:
I can deploy the MSS Business Package in Portal & with the appropriate iviews installed i can access "Change Personnel Area and Sub Area" in Portal.
The above thing works without any issues.
I have ads configured, acf & adobe lifecycle designer installed -- config tests are successfull for some sample webdynpro applications.
<i>
NEW Requirement:</i>
Users want to see the same "Change Personnel Area and Sub Area (ISR_FORM_SPPA, ISR_IF_SPPA) " in Portal as adobe interactive forms.
Can you tell me where i have to start to accomplish the above task?
Any insight on the below stuff would be higly appreciated and rewarded.
1)?backend tcode sfp?
2)?web dynpro java?
3)?business package Enterprise Portals?
Thanks in Advance,
RK.Hi RK,
We had a similar requirement and we used Web Dynpro for Java which contained the Interactive Form that would display the personnel area, personnel sub area, etc.
We developed a custom application in WD Java which would accept entries from the user on each screen after clicking on the Change Personnel area link in the portal. The user would put in the values and when the user would click on the Submit button, an adobe form would be displyed which would show the existing values as well as the values the user newly entered.
Hope this helps. Do let me know if you need any further inputs. -
Integrating Offline adobe form in Portal
Hi All,
I created offline adobe form using SFP tcode.
This form needs to be integrated in Portal. When user logs in, he/she should be able to open this form.
Can offline adobe form can be integrate to portal directly? or do we need to create the Webdynpro applications only for poral?
Please let me know whether we can integarate offline adobe form to portal directly. If not why?.. I don't know about portal.
Thank you!
PrasadHi Deepika,
This discussion thread is all about integrating a WebDynpro application which contains adobe form into portal.
I assume your requirement is different which needs to upload an offline adobe form into portal.
There are documents available to explain this functionality in detail. Please note down the following.
1) For uploading adobe form should be XML schema based.
2) There should be a webdynpro application with uploader UI element which has been integrated into the portal.
3) On form upload, you will get all the data associated with the form within webdynpro
Thanks & Regards,
Sanoosh -
Advantages of adobe forms over sapscripts and smartforms.
Good day ,
Can anyone pls mention atleast 2 to 3 major differences between sapscripts,smartforms and adobe forms?
I want to know wat r the drawbacks in each n how we rectified it in adobe forms.Are there any disadvantages in adobe forms??
Awaiting your reply,
Thanks,
Deepthi.Hi Martina,
SAP Interactive Forms by Adobe offer you the following business advantages:
1. Interactive functions automate the creation of data for SAP systems
2. Full integration into the SAP development environments for Java and ABAP
3. User-friendly tools reduce the time and costs associated with creating form layouts.
4. The usage of the PDF format means that forms retain their appearance regardless of the environment they are used in.
Moreover,
SAP Interactive Forms by Adobe offer the following basic functions:
1. Create form templates for the layout that include logos or pictures
2. Generate documents by merging form templates and current system data
3. Edit forms online or offline
4. Forms can be filled in advance automatically with specific data from SAP applications and then sent to the correct recipients using secure methods
5. Automatic consistency checks for forms
6. Activate enhanced functions such as comments
7. Digital signatures and form certification
8. Send completed forms to the SAP application with automatic updates of the business data
There are not any disadvantages in adobe forms as such except the value help is not present but that could be done after a little coding.
Reward if useful.
Regards,
Vaibhav Tiwari. -
Regarding Adobe form for development but the ADS always has a problem
Hi,
Currently we are using Adobe form for development but the ADS always has a problem in EC6 as below.
Test Program: Version Information (for Analysis Only)
System Error
ERROR CODE: 100.101
ERROR MESSAGE: SOAP Runtime exception: CSoapExceptionTransport : HTTP receive failed with exception communication_failure
SOAP Framework error: SOAP Runtime Exception: CSoapExceptionTransport: HTTP receive failed with exception communication_failure(100.101).
Would you pls help to figure it out?
Thanks & Regards,
SuneethaHi,
It seems that you ADS settings have not been maintained,
check the note
944221 Troubleshooting if problems occur in forms processing
Hope this resloves your issue,if not revert back.
Regards,
Vamshi. -
Make Adobe form not editable and Password protected
Hi All,
Want to add a button on adobe form , when user clicks the button then the form shouldn't allow to edit fields anymore.
I think this can be coded under script editor.
Please anybody specify the syntax to make adobe form not editable.
And my another issue is whether we can handle adobe forms password protected through SAP. kindly specify any approach.
Thanks in advance.
Regards,
Ashweeni.Hi Ashweenip,
PASSWORD PROTECTED PDF FORMS:
Go through these Threads
[Password protected PDF file|Re: Password protected PDF file]
[pdf with password encryption|pdf with password encryption;
Regards
Pradeep Goli
Edited by: Pradeep Goli on Feb 4, 2010 11:13 AM
Maybe you are looking for
-
Can you backup to 2 different Time Capsules?
I have a TC at home and one at work. Can I backup to both?
-
Creating standby database through Grid Control.
Hi, I want to know if source database which we term as primary database goes down during Db creation process when given option of "Perform a live backup of primary database" during Add standby wizard in Grid Control. Please let me know if people have
-
Ipod Nano (1st gen) too loud!
I cannot seem to set the volume of my nano to a LOWER volume setting - it is always too LOUD! It has all the updates. Can anyone help? Thanks
-
Select Query on CDPOS and CHDHR
Hi Expert, Can anyone help me on tuning the code below. The performance on this is really poor. I can't perform an innerjoin on this one sice <b>CDPOS</b> is a cluster table and <b>CHDHR</b> is a transparent table and also the internal table are inde
-
Anyone have a good radius server installed on their mac for use with WPA ent. I have an iMac that is on all the time and I would like to put a radius server on it so I can kill my debian box (which is handling radius) for a while.