Adobe forms survey became blank and all data is gone

We used Adobe forms central to create a survey.  We received approximately 105 responses, at which point I saved a copy of the responses in a pdf form to share with our team.  We later logged in to Adobe forms to see if any other respondents had completed the survey and discovered the entire form was blank.  All text, questions, and options were gone.  The only thing remaining was the image in the header.  While Adobe still reported 105 responses all data was gone.  Any help retrieving the data and returning the survey text would be greatly appreciated!

Please share the form with me ([email protected]) as a co-author. I will see if I can help.
Instruction on how to share can be found here : http://forums.adobe.com/docs/DOC-2462
Gen

Similar Messages

  • I have updated my iphone and all  data have gone including photos contacts and notes .is there any solution? I am about to syncope!

    I have updated my iphone4 and all  data have gone including photos contacts and notes .is there any solution?

    All data that was on your iPhone should be on your computer.
    All photos that were transferred to your iPhone from your computer should remain on your computer and can be retransferred. Photos/videos captured by the iPhone can and should be imported by your computer as with any other digital camera - especially before installing an iOS update. Re-transfer these photos from your computer as with any other photos available on your computer.
    Contacts and notes are designed to be synced with a supported application on your computer, and there are some free email accounts that support syncing contacts and notes over the air.

  • ODI: How determine if auto load is complete and all data has gone through

    Hi All,
    I am currently executing the below scenario and following http://docs.oracle.com/cd/E26070_11/otn/pdf/integration/E26075_01.pdf for the same.
    SRC: AGILE
    TRG: OBIEE
    As per the above i get out of the box packages which are used and executed , since this is something which comes out of the box how to determine whether my data load is complete and data has gone through from SRC->ODM->TRG?
    My Operator and sessesion show success and secondly i don see any errors in logs as well .
    Any help ? Anybody already experienced above scenario please help .
    Cheers,
    Mak

    So who do I believe?
    Blog:  http://www.jamoroki.com
    James King
    about.me/jamoroki
      <http://about.me/jamoroki>

  • When  Adobe Formscentral retires can we still send the forms to our customers  and recieve data on the response to export to excel

    When  Adobe Formscentral retires can we still send the forms to our customers  and receive data on the response to export to excel?

    Hello,
    Unfortunately, after the retirement of Adobe FormsCentral; you will not able to send and receive responses.
    Please visit the following link for more information:- End of support | Adobe FormsCentral
    Regards,
    Nakul

  • How to download adobe form in sap inbox and process it

    Hello experts,
    I have a query like how we can download the adobe forms in sap inbox and process process the forms using some program which will convert form data in to XML.
    thanks in advance.

    Hello Samad arif,
    May be you can reuse the code that placed in this document to covert the PDF form to XML format.
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c2567f2b-0b01-0010-b7b5-977cbf80665d
    Thanks,
    Bharath.K

  • How can I tell if Adobe Flash is installed properly and upto date version?

    How can I tell if Adobe Flash is installed properly and upto date version?
    Hi Guys and girls, hopefully an easy question for you.
    I installed Adobe flash and lightsource last night, cos I needed it to run Weebly website maker.
    Anyone know if Weebly runs correctly on 10.9.1??
    I have a new comp, so no previous version of flash on here, I am running OSX 10.9.1
    I just want to know How I can tell if Adobe Flash is installed properly and is the upto date version?
    Where do I go in the comp to find out,
    If I type in Adobe flash into search it only brings up flash manager, when I click this it is an uninstaller program.
    Lightsource shows in finder apps.
    If I type in flash player it shows up in plugins with a version number see screen shot.
    Where would I go to check for updates for things like flash on my comp?
    Thanks Team,
    Jason in oz.   :?):)  

    1. Safari > Preferences > Security > Internet Plug-ins
        Allow Plug-ins
    2. Go to this Adobe site to check. You will see the animation above the tree.
    How to know whether AdobeFlash Player is installed
    http://helpx.adobe.com/flash-player.html?promoid=ISMRY

  • The camera raw button in Adobe Bridge has quit working and all my camera raw files are hidden by a c

    The Camera Raw button in my Adobe Bridge has quit working and all my raw files are hidden by a cover that says PEF and has a camera raw icon on it.  I can open the files in camera raw if I double click on the file but I want to see the files and be able to use the camera raw button.  How can I fix it?

    This means you have not the correct ACR plug in to support your PEF files or no ACR plug in installed at all.
    In photoshop go to the menu Photoshop / About Plug ins / Camera Raw.
    Here should be showing the version number of your ACR plug in (only 1 version should show btw)
    Then go to this site and check wether your camera is listed and what minimal version you need to open the files:
    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html

  • Ipod Synced with PC and all data lost

    Hi, I have a new Ipod classic 120 GB. I normally use it with my macbook and all was good till yesterday my brother synced it with a PC and all data was lost. My Ipod has a few mp3 music flies which i cannot delete and gives me error code 61. It also refuses to be recognized by my macbook again although when i connect the itunes open in my macbook but doesnot read the ipod and does not sync. I have even tried to restore. The ipod pluged in icon appears on the screen. Any suggestions to help me get my data back from my macbook itunes would be much appreciated.

    DId you sync you iPod on another computer?  If so the photos are gone.
    Unless you synced/backed up your iPod after you had taken the photos and the backup still has the photos, the photos are gone.  You can go to iTunes>Preferences>DIvices and see the date of the backup.

  • HT201269 I have new iphone and all data were restored but my music! How can I add my music from Itunes and new iphone?

    I have new iphone and all data were restored but my music! How can I add my music from Itunes and new iphone?

    Connect the old phone to your computer, right click on it in iTunes, and choose Transfer Purchases. That should put all of your music in iTunes except any tracks that were not purchased from iTunes. If you have any such you will have to retrieve them from the original source, or see: https://discussions.apple.com/docs/DOC-3141.
    Apple also has this tip for copying data from an old phone to a new one.

  • Drop down values in Adobe Forms vanishes upon Check and Send in HRAS

    Hello
    The drop down values in Adobe Forms vanishes upon Check and Send while initiating the process.
    I also get the error , u2018 The Entered Value is not on the List of Valid Valuesu2019   when I select the values again and try to SUBMIT.
    We are in EHP4u2026 and I am seeing many Notes has been released to address these issues in EHP3 itself..
    Request your help and supportu2026.
    Thanks
    Meena Venkatesan

    Hello
    Thanks for the swift response.
    We applied the Note 1413209 and 1403266. The fix didnu2019t work.
    I noticed the SAP Note 1403266 mentions a prerequisite Note 1346443 which is for SP4.
    We are currently in SP5 and our system mentions Note 1346443 as u2018Cannot be Implemented. u2018
    Please advise.

  • Photosmart C7280 Screen is blank and all panel lights are flashing

    Photosmart C7280 All-in-one screen goes blank and all control panel lights flash, can be reset by switching off/on various number of times. Problem then returns in differing length of time.

    Does it actually connect to your network?  If so, type the printer's IP address into a web browser, go to the Network Tab, then Network Protocols and choose "Enable IPv4 only", then Apply.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Delete Exchange Account: All Data is Gone. How to avoid?

    Hi all
    I'm trying to delete an Exchange account from my iPhone (I change jobs). When doing so, all data is gone: Mail (ok, of course), calendar (I've got lots of private entries there), and contacts (same here).
    Is there a way to avoid deletion of this data when deleting an exchange account?
    (I had the same problem years ago with a cancelled MobileMe test account: all data was gone. I thought it was a bug then. But no, looks they consider it a feature. Unbelievable...)
    Regards & thanks
    R.

    Only way is to back up all the data from your office PC BEFORE you leave the job.
    The appointments and contact etc. do not live on your phone, they live on your Exchange server.

  • When i did the last update my pictures got scrambled and the dates are gone

    When I did the last update my pictures got scrambled and the dates are gone and there's strange numbers and letters underneath them.

    It says that to download past purchases, they must done under the apple ID that was used to purchase the items. I have an original ID for my iTunes on my computer.  At some point I changed my apple ID on the iTouch since that email account was deleted.  So I was syncing through iTunes under a different ID then was on my iTouch.  Can I do anythng about that so I can check past purchases?
    Since the apps aren't in the backup, how do I transfer the apps on my iTouch to my iTunes?

  • Adobe form saved from email has no data

    Hi.
    We generate Adobe Interactive Forms (developed in Adobe LiveCycle 8.0) from our SAP Netweaver environment.  A form is sent to the vendor as an email attachmet and they launch Adobe Reader (or another pdf reader) to acknowledge the form and submit it to our back-end system to save the changes.  One vendor saves the form directly from the email for later printing.  This process has worked for some time but we recently upgraded our SAP system and made some corresponding changes to the form in LiveCycle Designer.  We now see the following issue:
    Before the changes, the email attachment pdf could be saved directly from the email without opening Adobe Reader.  After saving, the pdf could be seen in Windows Explorer in preview mode and all fields would be populated. 
    Since the changes, if the pdf is saved directly from the email without opening Adobe Reader then after saving, if the pdf is viewed in Windows Explorer in preview mode, all fields (from the XML) are not populated but the form template is visible (boxes, buttons, etc.)  Also, if the vendor attempts to print the form using third-party software, the form is printed with no data but the form template is visible.  If the same pdf is opened in Adobe Reader, all data is visible.
    Also, since the changes, if an old (created before the changes) pdf is saved directly from the email, the output is visible in Windows Explorer preview as well as print output and Adobe Reader.
    Are there any suggestions on what has caused this change in the output from the form?
    Thanks for your help.
    .. Craig

    E-mail submission is client sensitive (this even occurs with HTML forms that use mailto). In Acrobat or Reader on Windows, it uses the default MAPI mail client (if one exists - one of the problems). I have no idea what the requirement is on a MAC, but probably something similar. You need to figure out how to do a web submission to resolve the problems.

  • Hyperion Planning dynamic forms based on start and end date across years

    Hi All,
    I have a requirement where i need to be able to view a form showing periods across years that are dynamically built depending on the start and end dates. If i have a start date of 01/11/2009 and an end date of 31/7/2013 i want to be able to view a form that shows all of the periods (Jan,Feb etc) in a form that is driven by these dates, in addition it will need to show the actual scenario up to the current month and the forecast from the current month to the end date. So basically if a user inputs the start and end dates the form will display the relevant periods driven by these dates.
    Any tips very much appreciated!

    Hello,
    This is difficult to realize, but you can get quite far with a workaround. The first question is, where do you want to input your selection of time periods? Assuming you have a webform with the complete timeline in months and years and you type in the start period and end period.
    Webforms have the option to suppress rows and columns.
    This can be extended with option of empty cells or not empty cells.
    You will need to apply your creativity on this.
    Put every month-year combination in a column and add the suppression.
    Calculate the timeline between start period and end period with a dummy member, so data exists for these and columns will show.
    Maybe you will need to copy the required timeline into a separate version for this, to avoid having periods which were outside the selection and still have data.
    I hope these hints help a bit in this challenge.
    Regards,
    Philip Hulsebosch
    www.trexco.nl

Maybe you are looking for

  • Material shortage ( soft or hard error ) while releasing production order?

    Hi Guys I  am a SAP tech guy wrote a BDC program to release production order. It worked fine in one enviroment but not working another enviroment saying ..Material shortage. My BDC program can't afford any hard errors in the process. The execution st

  • How can I pause an action while recording so I can...

    Hi all, I have made many actions before but I do not know how to do this. Ok I want to make an action which will unlock the background layer then duplicate that layer and add adjustment mask to the new layer, I have gotten all this done. But on the f

  • Implementing drag and drop across components with drag image...

    Hey all, Finally got the hang of drag and drop. Not too hard, but a little time consuming. I found an article showing how to capture and drag a BufferedImage within a JTree. When you click and drag a node, it creates a BufferedImage of the node on sc

  • Can you share the desktop through Apple TV

    Curious? What all can you push to the TV screen.  Can you push the desktop to the TV?

  • LabVIEW 3.0.1 to 2011?

    Hi! I am a beginner in LabVIEW and I should write a new VI for a solar cell in our university. It is used for experiments for other students. But unfortunately the devices are very old ( Keithley 228a and 199 ). So there are some problems using GPIB