Adobe freezing virtual desktop session
We have classrooms with Windows 7 Virtual desktops running on Xendesktop. When a student has multople adobe documents opan and attempts a search, it freezes the sessoin. I then have to forcably reboot virtual desktop in order to release the session.
Hi,
Seems this is not the possible scenario for deployment, we need to have Session based deployment as both virtual desktop session and session based deployment differs from other.
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Similar Messages
-
RDS 2012-PUBLISING REMOTEAPPS WITH VIRTUAL DESKTOP SESSION
Hello, I deployed a RDS 2012 VIRTUAL DESKTOP SESSION FARM.
Is it possible publish a REMOTEAPPS with Virtual Desktop Session?, I only find information with Remote Desktop Session
Thanks
RegardsHi,
Seems this is not the possible scenario for deployment, we need to have Session based deployment as both virtual desktop session and session based deployment differs from other.
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Adobe Reader 9.4.5 & Virtual Desktop Infrastructure compatibility ?
I am seeking following information on Adobe Reader 9.4.5 in regards to MS Virtual Desktop Infrastructure compatibility, below are questions:
1. Is the application – Adobe Reader 9.4.5 supported on Windows 7 x64 desktop virtualised on Windows Server 2008 R2 Hyper-V presented by Citrix XenDesktop 5.5/5.6 ?
2. Is the virtualization of the application supported ? [We are Planning to virtualize the Application using Microsoft App-V/Citrix ] ?
3. Is the application supported if installed on Virtual Machines [VDI] ?
4. Does the Application’s current License Policy support if the Application is virtualized ?
5. Does the Application’s current License policy support the Application on Virtual Machines?
If not is there any license policy that supports the Application on Virtual Machines ?You can remove the corrupted installation using the Windows Installer CleanUp Utility.
-
what would cause adobe connect to freeze in a session for users, while the moderator session did not
HI rogerstam1
Is screen being shared at that time when addin freezes?
if yes if this coems again could you just stop screen share and try it again.
hope this helps. -
Can I record desktop session with Adobe Premiere Elements?
I search for software, where I can record on my Windows 7 the Desktop Session.
Adobe Premiere Pro can this. Question, it is possible with Premiere Elements?The best software I've found that can do this is Camtasia from Smith Micro. If by recording a "desktopy session" you mean recording your computer screen.
-
Virtual Desktop/Space video freeze
Hi there,
I am using Lion Server 10.7.1 with the new "virtual desktop/space" feature. Lion Server is installed on a mini (core2duo, 4GB RAM) which is showing eyetv on my tv. From another mac (Lion 10.7.1) I connect to the mini for administration using the new virtual desktop/space feature. I get a blank desktop where I can work very well but...Everytime I do this, the eyetv video and most time after some more seconds also the audio freezes on my tv. This also happens when I use Itunes. After I close the administration connection the video plays fine.
Any idea or anyone out there without theses problems?
Thanks,
Frank.Someone in the Lion Server Forum might know?
Regards,
Colin R. -
Adobe Captivate and Virtual Desktop (citrix)
I have captivate 5 and I'm using it through a virtual desktop in citrix. The problem I have it when I try to start a recording, the application stops responding and closes without leaving any event. The captivate 5 it´s supported for citrix virtual desktop?
Hi there,
It will be helpful if you can give us the following information
1. Has this scenario worked for you when using Captivate 4?
2. What are you trying to Capture? You can let us know the type of application, type of capture setting, and when does it close the application.
3. Apart from recording, are other workflows in Cp 5 working as expected?
-Ashwin Bharghav B -
Adobe Acrobat Reader Starts when opening a Remote Desktop Session
I recently upgraded to Acrobat Reader 8. Now I have a problem that Acrobat Reader loads when I open a Remote Desktop session. Has anyone else experienced this? Does anyone know what I should look at to get it to stop loading? Thank you.
After a third uninstall and re-install I've managed to crack it.
Thanks anyhow everyone. -
APP-V 5.0 VDI A Temporary Profile is created when I log into the Virtual Desktop
Dear Sirs
I'm Enzo , an Italian System Engineer. Together with other fellows we created a test environment :
- a VDI machine (POC-VDI,10.102.94.219, Windows Server 2012 R2) with
RD Web Access, RD Connection Broker, RD Virtualization Host, RD Session Host Installed
The Hyper-V Environment includes :
- DHCP Server (to provide addresses to Virtual Desktop Collections)
- APP-V_5.0_Server , Application Virtualization Management Console 5.0, with 2 published packages (Office 2010 and Open Office 4)
- Sequencer_W8-1, Application Virtualization Sequencer 5.0
- Client_8-1 , Client Windows 8.1 with Application Virtualization Client 5.0
From the Client_8-1 we can download and run the two published packages from the server (user VDI_TEST_1)
The Client_8-1 has been used as the template (sysprep /oobe /generalize /shutdown) for the Virtual Dektop (APP-0 and APP-1)
included in the collection 'APPV' (Pooled, Automatically Manage Virtual Desktop, Roll Back Virtual Desktops Enabled).
I connect to the 'RD Web Access' ( http 10.102.94.219 RDWeb, user VDI_TEST_1) , I then connect to APPV collection .
When I get logged into the Virtual Desktop (APP-0 or APP-1, user VDI_TEST_1), a Temporary Profile is created. Why ?
We configured :
User Profile Disk : share Location 10.102.94.219 UPD
UPD : Share Everyone Full Control
Security SYSTEM Full Control
Network Service
Full Control
POC-VDI$ Full
Control
Administrators (POC-VDI\Aministrators)
Full Control
Users (POC-VDI\Users)
Read & Execute
I am puzzled as long as when I get logged into the Virtual Desktop, a Temporary Profile is created. Why ?
Thanks in advance for your kind attention
EnzoHighly unlikely it has anything to do with App-V.
Start troubleshooting by looking at permissions on shares and folder under the shares for the profile.
Tim Mangan MVP for App-V and Citrix CTP Author of AppV books: "The Client Book" and "OSD Reference Book" (http://www.tmurgent.com/Books ) -
What licenses do I need to get a virtual desktop environment up and running?
I’m trying to figure out what licenses I need to get a full Windows Virtual Desktop Infrastructure (VDI) up and running with the Remote Desktop Service (RDS) roles.
I have Win.Server 2012 running Hyper-V, which has about 10 different virtual machines (VM) with either Win.7 or Win.8 installed on it. These VMs will act as virtual desktops (VD) for about 200 people to remotely access and use.
My question is, what licenses do I need to support this scenario?
So far, I’m planning to purchase a few Windows Server 2012 Standard Edition with 10 Client Access Licenses ( $1414.19 each). I’m assuming that’s 1 license for the server and 10 Client Access Licenses (CAL) for users who will access the VDs. I’m also planning
to buy about 200 RDS CALs ($149 each) for the rest of the users to access the VDs. Do I need to buy additional licenses for each VM image I create (the 10 images I mentioned earlier)? These VMs are in a pooled virtual desktop collection, so they reset themselves
when users disconnect from them. If I have personal desktop collections which give unique desktops to each user and saves their settings, will my license have to change if I have that too?
At first I thought just buying the RDS CALs will allow me to install windows where ever I want, how many times I want and all I have to worry about is paying for the client access, but do I need to pay for the OS as well? So essentially I’m doubling the
license?
A side question not really related is, if I have Windows Thin PC, (which was said to come free if I have SA with another product) and bought the Windows Server license, does that come with SA and I can install Windows Thin PC as many times as I want
on which ever desktop I have that will connect to this VDI system?The 10 server licenses are fine, but they don't help you with VDI or remote desktops. I you want to install the Remote Desktop Session Host (formerly known as Terminal Server) role on all your servers und provide remote desktops for your 200 users, 200 RDS
CALs are the right choice (per user or per device).
But if your 200 users have access to virtual desktops, you need 200 VDI licenses. It doesn't matter if you only have 10 virtual desktops if potentially all your 200 users have access to them. VDI licensing is not based on a concurrent model, so every client
that can connect to a VM needs its own license. If Windows 8 Enterprise with SA is on all your client devices, you're set because SA gives users access rights to up to 4 Win8 or Win7 VMs concurrently (local or remote). In addition
it gives them a so-called companion subscription license for personally owned, non-primary devices.
For those primary corporate devices that are without SA, you'll need to purchase a single VDA license for each device that connects to any number of your Win7 or Win8 VMs. The same applies to personally owned devices of users who don't have a primary
corporate device with SA. In other words, BYOD is supported if your primary device is under SA.
For neither VDI/SA nor VDA it does matter if users are connecting to different VM images or only one. Typically, they cannot connect to more than 4 VMs at the same time in order to stay within the licensing limits.
Benny -
Nvidia GPU GRID K1
Host Server - Dell Power edge R720 128 gig RAM 2 Xeon E5-2640v2 2.0GHz, 20M cache 8c
Windows 2012 R2 full installation – Bios and all hardware with latest updates.
Roles - Hyper V and Remote Desktop Virtualization Host
EPT, GPU, WDDM (latest drivers) compatible for RemoteFX and fully up to date.
I have disabled the video adaptor on the motherboard.
I cannot complete with administrative permissions;
dism /online /enable-feature /featurename:Microsoft-Windows-RemoteFX-EmbeddedVideoCap-Setup-Package
Error: 0x800f080c
Feature name Microsoft-Windows-RemoteFX-EmbeddedVidoCap-Setup-Package is unknown
Question 1 - because video card on motherboard disabled, do I still need to complete this command?
VM’s
**I’m not interested in VDI but more Remote Desktop Sessions and the option to ‘pinch and zoom with Windows 8.1 tablets**
VM1 - Windows 2012 R2 configured as generation 1 that is fully patched.
This VM is able to start up and run until I add the new hardware for the RemoteFX Video adaptor from within the Hyper V settings. When I start the VM the server blue screens. I have tried multiple VM’s with 2012 but same thing
If I created the VM as Generation 2 I am able to start the VM but the RemoteFX adaptor doesn’t appear in the device manager. I have read generation 2 isn’t compatible with RemoteFX.
VM2 – *Testing purposes* - Windows 8.1 Enterprise configured as generation 1 that is fully patched.
This VM I am able to start up and run the VDI after the RemoteFX video adaptor is installed, also the correct adaptor appears in the device manager. This seems to at least work correctly but I cannot pinch and zoom and the experience is poor.
GPU summary within the Hyper V settings state there are 4 physical GPU’s all of which can be used with RemoteFX and that 1 virtual machine are using the GPU (Windows 8.1 enterprise VM)
Firewalls off, latest RDP clients
I have read you should be able to use Windows 2012 R2 and we should be able to use the sessions with pinch and zoom but now and then you come across something that tells me different.
Question 2 – I need this to work with Windows 2012 R2 so we can use Remote Desktop Sessions
and the tablets can use pinch and zoom, anyone tell me what I may be doing wrong?Hi,
Thank you for posting in Windows Server Forum.
As per my research, you need to run the command although video adapter is disabled on motherboard. If you install the RemoteFX cap driver, the integrated video adapter is disabled while the operating system is running.
For more information you can refer beneath article.
1. RemoteFX (with Hyper-V) is a serious business tool. For games.
2. Configure RemoteFX in Hyper-V running Windows Server 2012 with low end GPU
Hope it helps!
Thanks.
Dharmesh Solanki -
Hi.
I started a Creative Cloud abonement and try to install applications. But the download of the "adobe creative cloud desktop" always stops with error code 207 (No answer from server, try later). I am trying for 6 hours but the problem is still the same. What can I do?
Thank you,
HeikoErrors 201 & 205 & 206 & 207 or several U43 errors
-http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html -
When trying to install Adobe Create Cloud desktop app, the adobe installer box comes up and it will not load past the "trying to connect to the server..." part. Why is this and what steps do I need to take to resolve this issue?
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html -
Adobe crashes to desktop when I try to create a PDF from a Word document.
The PDF does end up getting created, but not before crashing my Adobe to my desktop, or even crashing it to the background so I have to kill Adobe in the task manager in order to get it to start again. The progress bar used to fill up faster when it was working correctly, but now, the progress bar just slowly fills up under "Reading PDF Document" and then freezes.
I'm running Windows 7 Pro x64 on a Thinkpad T620.
Please help!It's 9.4.
We are having multiple issues crop up on this system. Its MS Office and antivirus are both unstable, and a SQL server update has failed, so I am beginning to suspect that this issue may be a symptom of a bigger problem. -
Cannot Reassign Virtual Desktop in Windows Server 2012 Personal Managed VDI Collection
I have a Personal Virtual Desktop Collection on my Windows 2012 server with 3 desktops created.
For testing purposes, I assigned the 3 desktops to admin users and everything was working well. I need to re-assign two of the three desktops to the actual end-users now that they are setup the way I want, and tested. I go through Server Manager - Remote
Desktop Services - Collections - Virtual Desktop and select the virtual desktops, then select Assign and enter the new AD User. It does not error, and now shows the right user assigned.
But, when I try to remote desktop for these two users, it logs into the actual Windows 2012 server, and not the virtual guest on that server.
I've rebooted the server and guests a few times, and cannot seem to get this working for these two users.
Any ideas?
Tom DroughtHere is the whole sequence of events for a "normal" connection, do you see these?
Log Name: Microsoft-Windows-TerminalServices-SessionBroker/Operational
Source: Microsoft-Windows-TerminalServices-SessionBroker
Date: 5/14/2013 2:45:10 PM
Event ID: 800
Task Category: RD Connection Broker processes connection request
Level: Verbose
Keywords:
User: NETWORK SERVICE
Computer: rdvh.corp.contoso.com
Description:
RD Connection Broker received connection request for user CORP\user1.
Hints in the RDP file (TSV URL) = tsv://VMResource.1.VDI-BB
Initial Application = NULL
Call came from Redirector Server = rdvh.corp.contoso.com
Redirector is configured as Virtual machine redirector
Log Name: Microsoft-Windows-TerminalServices-SessionBroker/Operational
Source: Microsoft-Windows-TerminalServices-SessionBroker
Date: 5/14/2013 2:45:11 PM
Event ID: 801
Task Category: RD Connection Broker processes connection request
Level: Verbose
Keywords:
User: NETWORK SERVICE
Computer: rdvh.corp.contoso.com
Description:
RD Connection Broker successfully processed the connection request for user CORP\user1. Redirection info:
Target Name = VDI-BB-1
Target IP Address = 192.168.1.108
Target Netbios = VDI-BB-1
Target FQDN = VDI-BB-1.corp.contoso.com
Disconnected Session Found = 0x0
Log Name: Microsoft-Windows-TerminalServices-SessionBroker/Operational
Source: Microsoft-Windows-TerminalServices-SessionBroker
Date: 5/14/2013 2:45:15 PM
Event ID: 787
Task Category: RD Connection Broker manages resource (target/session) related information
Level: Verbose
Keywords:
User: NETWORK SERVICE
Computer: rdvh.corp.contoso.com
Description:
Session for user CORP\user1 successfully added to RD Connection Broker's database.
Target Name = VDI-BB-1
Session ID = 2
Farm Name = VDI-BB
Don Geddes - SR Support Escalation Engineer - Remote Desktop Services - Printing and Imaging
Maybe you are looking for
-
Cancelling contract due to Overcharges and NO RESOLUTION
I have been a Verizon customer on a plan with my mother for over 5 years now. I recently moved out of state and wanted to upgrade my phone to an Iphone before I moved. Because I was not an "authorized user" on the account (my Mother wanted to be the
-
I have an app in my app store that is requiring an update but I never purchased the app and when I click update, another apple ID pops up that is not mine. Now i keep getting reminders to update the app and I cant get rid of it from the app store.
-
I need to connect the Apple Composite AV Cable to my IPOD but i need change the settings video into the icon IPOD, but this icon does not appear in the settings general. What can i do?
-
New Desktop Mgr Stops Abruptly During Outlook 2007 Calendar Sync
Like an **bleep**, I upgraded something that was working perfectly. I upgraded to BB software v4.2 on my 8830 and upgraded the Desktop Manager to v4.7. Now, when I sync, it just brings up a Vista dialog that says it has stopped working and that W
-
New playlist not loading music.......
Looks like songs are loading into my old playlist but new playlist and and songs in them aren't. What happened and how to fix it? Thanks for any help.