Adobe GoLive 6 がインストールできない

今まで難なくインストールで来炊いたのが急にできなくなりました。
インストールの終わりのほうで「ファイルの作成エラー 1008:5、-5000」と出て、そのあと、「アクセス権がないので終了します」と出て、インストールが、終わってしまいます。
おわかりの方、お教えください。
機種:400AGP
CPU:ソネットの1.8GHzに換装
メインメモリー:1.5G

>同じ投稿者による投稿で「Adobe PageMaker 6.53J Updateができない」というのがこのGoLiveフォーラムにあるが、あれは削除したほうがいいのでは?
>件名からしてGoLiveとは関係ないし、内容のほうもまったく書かれていない。
>返信スレッドが付かない限り、削除権は最初の質問投稿者にあるはず。
これは、憶えていない。
>> ファイルの作成エラー 1008:5、-5000
>これをそのままGoogleに投げ込むと、PageMakerインストール時の問題としてすでにサポート情報が出ているのがわかる。
>エラーメッセージもほぼそのままだし、Macintoshだけの問題なので、大方解決法は共通しているのではなかろうか?
バージョンが違う。聞きたいのは、6.53へのアップデートだ。
上記で検索すると、バージョン7のがでる。
推測でご高説ぶるのはいかがなものか?
>文書番号 : 223806
>「ファイルの作成エラー。ファイルが見つかりません。1008:5、-43)」がインストール時に発生する(PageMaker 7.0)
>プラットフォーム : Macintosh
だからバージョ(以下略)
>念のためサポートデータベースを見れば、「ファイルの作成エラー 1008:5, -5000 アクセスエラー」というエラーがAfter Effects 5.5.x または Premiere 6.5のインストールで発生することが分かる。こちらもMacintoshだけの問題。
だから(以下略)
>文書番号 : 222639
>Mac OS X 10.x で After Effects 5.5.x または Premiere 6.5 をインストールするとエラーが表示される
>Issue (問題点) :
>Adobe After Effects 5.5.x (アップデートまたはフルバージョン) もしくは Adobe Premiere 6.5 を Mac OS X にインストールすると、次のようなエラーが表示されます。
>「Error could not create file, insufficient access (ファイルを作成することができないエラー、アクセス権が不十分です)」
>ファイルの作成エラー 1008:5, -5000 アクセスエラー
だ(以下略)
>当方はGoLive ユーザではない。
だったらなぜここにいる?
>> インストールで来炊いた
>ある意味、すごい日本語だ。
>「できていた」とすべきところを誤って「できたいた」と打ち、さらに漢字変換したらこうなるのだろうか。私の環境ではならないけど。
これだけが言いたかったのか?
中坊並のツッコミだな(笑)

Similar Messages

  • Adobe GoLive CS2 for Windows?

    I need a copy of Adobe GoLive CS2 for Windows. Where can i buy one?

    It is no longer for sale through legitimate retail channels. You could test your luck by finding a copy for sale on eBay but those are most often pirated. You might as well find a pirated copy for free than give your credit card info to a pirate.
    If all you need is 30 days of use, I think you can still find the CS2 trial at ftp://ftp.adobe.com/pub

  • What product opens Adobe GoLive files in Mac OSX 10.8.3?

    What product will open my old Adobe GoLive Web files now that I have installed Mountain Lion OS X 10.8.3?
    I installed the new Mac operating system, not knowing that it would make my Adobe GoLive CS2 inoperable.
    I know it's Adobe GoLive is old, but I maintain my churches website using the old system, and now have no way to update the site.

    download a trial of dreamweaver (http://www.adobe.com/cfusion/tdrc/index.cfm?product=dreamweaver) and see if you can open those converted (http://www.adobe.com/devnet-archive/dreamweaver/golive_migration/content/using_gmk_extensi on.html) golive files.

  • Adobe GoLive 6.0 (ENG) on Taskbar

    My daughter used GoLive on my computer, and now a big chunk of my taskbar is taken up by the string "Adobe GoLive 6.0 (ENG)"
    I have uninstalled GoLive, used regedit to remove all GoLive entries, and did a search and removed all files that had GoLive in their name. Rebooting between each thing I tried.
    I can't find any reference to this problem on the web.
    Any idea how to get this off the taskbar?

    1. Mylenium hat natürlich in allem 100% recht.
    2. Trotzdem ist es einen Versuch wert, die Voreinstellungsdatei zu löschen und GoLive neu zu starten.
    Sie heißt irgendwas mit *.prf . Unter Windows 7 mit GoLive CS2 wäre sie so zu finden:
    C:\Users\[Dein_Benutzername]\AppData\Roaming\Adobe\Adobe GoLive\Adobe GoLive 8.prf
    MfG
    us-hh

  • Tutorial on how to use slideshow in adobe golive

    hI,
    I have been tearing my hair out for the last week I find it impossible to work out how to set up a slideshow in adobe golive cs - Does anybody know some simple tutorials on how to do it, as I find the online help with golive no help at all..!
    I have tried this link, but I still can't work it out
    http://www.afterhours.org.uk/qtips/sld_act.html
    Step 2:
    Place the first image of the slide show sequence on the page where you want your slide show to appear. That will be the base image of the slide show.
    The image needs a name so that the Javascript used for the slide show can reference it properly. This is done on the Basic tab of the Image Inspector in GoLive CS, and in the More tab of that Inspector in earlier versions. (Mouse over the link underneath the CS image shown to see the GoLive 6 Inspector.)
    What are you suppose to put in the ALT TEXT AND NAME/ID
    It says in the tutorial put Basic slide show in the ALT TEXT is that correct..?
    and the link what are you suppose to put in the text section of the inspector
    I have named my jpegs as 01.jpeg 02.jpeg and so on and put them into a folder that says canoe..
    any help would be much apreciated..

    On the home page on the free to register technology network
    http://www.oracle.com/technetwork/middleware/bi-publisher/overview/index.html
    you will find resources such as
    * Oracle BI Publisher Datasheet - a 3 page overview document
    * Oracle BI Publisher Overview Presentation - (Recorded Presentation with Sound - 18 min)
    * Oracle BI Publisher - Benefits - Flash
    * Oracle BI Publisher - Quick Tour - Flash
    some sample reports
    http://www.oracle.com/technetwork/middleware/bi-publisher/xmlpsamples-099828.html
    and a tutorial with screen shots
    Getting Started with Oracle BI Publisher 11g
    http://st-curriculum.oracle.com/obe/fmw/bi/bip/bip11g/gettingstarted/gettingstarted.htm

  • Font corruption and Adobe GoLive CS2 V 8.0

    After 10.6.7 upgrade via Combo (Safe mode; DW; RP etc) , Camino & Chrome crashed. (Seamonkey, iCab, Omniweb, Safari & Opera did not) This was due to a corrupted Font, fixed via FontBook.
    Being somewhat non-Font orientated my simple websites displayed Apple Chancery on my new iPad but displayed 'cursive' on wife's 10.6.6 which my iMac (10.6.6) also used to display.(??)
    On 10.6.7 all my sites displayed Apple Chancery on 10.6.7 ... fixed by changing Fonts.
    Adobe GoLive CS2 8.0.1 pretended to upload 'changed' files but never did! I had to 'delete-drag-drop' or use Transmit to upload changed files?
    I duplicated some of these files only to find CS2 never uploaded the changed files!!
    Does 10.6.7 break Adobe GoLIve 8.0.1??
    In 10.6.6 I had some embedded MP3 files and 10.6.6 played these no problem. 10.6.7 will not play them from the website but plays them locally?
    I tried all sorts of methods including javascript but 10.6.7 would not play them even after booting Paralells and IE8/9?
    As I use a free ISP (ByetHost) to check my sites I transferred one to my homesite with the same result?
    I am of the opinion that 10.6.7 breaks GoLive CS2 (Please! Not Dreamweaver!!)
    I have a 10.6.6 SuperDooper 10.6.6 to go back to but worry what 'Lion' will bring??
    Anyone else with similar problems afte upgrade to 10.6.7??

    Thanks, R C-R, I am aware of the Font dependency on platforms but wondered why it suddenly reverted to the 'correct' font after installing 10.6.7. My previous OS upgrades didn't do this so I assumed 10.6.7 showed the 'true state' whereas previous upgrades didn't.
    I checked my F/W backup of 10.6.6 and found 2 Fonts that were inadvisable to use so this is where Camino/Chrome crashed due to these Fonts. I consider it an 'Installation' problem as it never happened before.
    The GoLive problem was of my doing and is now sorted.
    However, part of this GolIve problem was found to be related to embedding MP3 in web pages and I assumed it was the install of 10.6.7 that activated this. I now believe it was either iTunes 10 or Safari 5 (10.6.7 installs Safari 5??) or both.
    I shall close this thread and continue on http://discussions.apple.com/thread.jspa?threadID=2454051&start=75&tstart=0
    Thanks

  • Message: please select folder that contains your Adobe GoLive files

    Hi, I'm really new to DW 5, I did use DW when it first came out and started to get the hang of some things, but my learning was not going as fast as I needed it to go. So I have two questions, I have searched the forums for my answers but I'm getting them in bits and peices and have also found the same question I'm about to ask, but didn't see an answer.
    Anyways, first; I'm using OS X (updated to 10.6.5) I was using "GoLive" but in the middle of updating the site, GL would crash, it wasn't from anything inperticular, it would just crash, it was always around 4-5 minutes of using it. So I started using "GoLive CS" it had been working great until today, GL CS is now starting to crash on me, doesn't matter what I'm doing, it's just a time thing.
    Is there anything to fix this bug?
    I think I might know why, and I could be wrong.......... that this is a compatable issue, but I'm not sure. I think because they are not providing anymore updates for GoLive (any version) that pretty soon I might not even be able to use it at all, but if I'm wrong, Please help.
    Now if my thoughts are correct on the first question, then can some one please help me with this message I get when trying to "Migrate" my site from Golive to Dreamweaver.
    My first question tonight was going to be why do my pages look like there is nothing on the when I open any page in Dreamweaver when I saw the post about migrating your site to Dreamweaver.
    I downloaded the extension for Dreamweaver, I installed it but when I go to migrate the "site" it gives me this message.
    Message: please select folder that contains your Adobe GoLive files
    I came back to the forums to reread the post, but what it says to change in yoour files, I can't find. It says something about changing your "root" file.
    I can't find what to change.
    I kind of like GoLive better, at least right now, but I tryed to use DW tonight to really compair the two, I got CS5 about 5 months ago which included Dreamweaver CS5, so I thought I would give it a try utill I opened it and all of my pages were blank. But I still didn't give up and now this is where I am.
    Thanks for any help, sorry for such a long posting, but I would really like to see if I like DW with out starting all over and having to rebuild my sites from scratch in DW.

    My sites were created in GoLive (i think version 6), but it started to crash, so I switched to GoLive CS (i think this is version 7).
    It was working fine until yesterday. Yesterday GoLive CS started to crash, so I decided to give DreamWeaver a try since it came with the version of CS5 that I bought about 4-5 months ago.
    Yes, I downloaded and installed the extention from the link, the one that talks about Dreamweaver CS4, and I also read this on that page (below is what I copied from the page)
    ========================================================================================== ===
    Note also: If you created your site with GoLive CS (7)  or older and then upgraded to GoLive CS2 (8) or GoLive 9, you may  experience problems with the GoLive Migration Kit extension for  Dreamweaver CS4. If this is the case, try renaming the following:
    Rootfolder-fd > web-content
    Rootfolder-fd.settings > web-settings
    Rootfolder-fd.data > web-data
    ========================================================================================== ===
    I looked for "Rootfolder-fd -fd.setting and fd.data" I can't find them.
    I was going to try and change them.

  • Adobe GoLive 6.0

    Hi,
    I am currently working my way through the book "web programming in ABAP with the SAP web application server". It says that before proceeding to start creating BSP apps., it is recommended to install Adobe GoLive 6.0.
    The problem is that I cannot find that product. Has it been replaced by another product related to this ?

    adobe golive is a html editor (http://webdesign.about.com/cs/htmleditors/gr/aapr_golive6.htm).
    this is not mandatory for creating BSP apps.
    Just log on to SAPgui and go to transaction se80 to develop your BSP apps.
    Raja

  • Compatibility with Adobe GoLive?

    I have made a navigation bar in Flash, and have referenced it
    into an Adobe GoLive frame of a site. The movie works fine, but I
    would like to set the menu items (made in Flash) to open pages in a
    frame of this GoLive document. You might think I'm crazy for using
    GoLive but I really have my reasons, I promise!
    Any ideas about some ActionScript Code, or just what
    to do??

    > Thanks for responding - I'm a little new at Flash,
    though, so I have a couple
    > questions. When you say, "type off hand that frame name
    in the 'window' box,"
    > what exactly to you mean? I understand how to write the
    getURL action, but I'm
    > not sure exactly how to incorporate this frame (named in
    GoLive, correct?).
    type off hand - flash getURL action does not actually give
    you the option
    to choose frame name. In the place where you define the
    parameters like
    _blank or _top, you need to type by hand the frame name.
    That's what I
    mean by off hand.
    regular looking action:
    getURL("
    http://yahoo.com", "_blank");
    your action:
    getURL("
    http://yahoo.com", "FrameNameHere");
    When comes to HTML frames. Each frame has a name, id and page
    source
    that loads within that frame. That's the standard html:
    <frame src="mainPage.html" name="mainFrame" id="mainFrame"
    title="mainFrame" />
    <frame src="bottomFrame.html" name="bottomFrame"
    scrolling="No" noresize="noresize" id="bottomFrame"
    title="bottomFrame" />
    Now, names like mainframe are reserved so you do not want to
    use it in your
    frames.
    Give these frames different names, for example "melissa_v"
    <frame src="mainPage.html" name="melissa_v" id="melissa_v"
    title="My Main Page" />
    <frame src="bottomFrame.html" name="melissa_bottom"
    scrolling="No" noresize="noresize"
    id="melissa_bottom" title="Some title, not required" />
    your action target melissa_v frame would be:
    getURL("
    http://yahoo.com", "melissa_v");
    Understand better ?
    Best Regards
    Urami
    !!!!!!! Merry Christmas !!!!!!!
    Happy New Year
    <urami>
    If you want to mail me - DO NOT LAUGH AT MY ADDRESS
    </urami>

  • Adobe GoLive CS2 to Dreamweaver

    Skriptfehler: null is not an object
    In Modul: GL2DW
    Skriptdatei:C:\Program Files\Adobe\Adobe GoLive
    CS2\Modules\Extend Scripts\GL2DW\Main.html
    In Zeile: 509 :g2dSnippetCounter = traverse
    (g2dSnippetSourceFolder.ref.getContent(), null);

    Skriptfehler: null is not an object
    In Modul: GL2DW
    Skriptdatei:C:\Program Files\Adobe\Adobe GoLive
    CS2\Modules\Extend Scripts\GL2DW\Main.html
    In Zeile: 509 :g2dSnippetCounter = traverse
    (g2dSnippetSourceFolder.ref.getContent(), null);

  • Adobe GoLive and Safari 5 not getting along

    Hello.
    I was trying to update a web page on a site that I'd created with Adobe GoLive version 8.x. Every time I tried opening the site files in GoLive, I got a crash. I decided to quit out of Safari 5 which was still running in the background to see if that would help. It didn't. I found a partial workaround to getting into my page, and it doesn't seem to be Safari's fault.
    I guess more than a Safari question, is are there any good, current Web Site Authoring packages for the Mac out there? I really don't feel like paying $200 for upgrading to Adobe's Dreamweaver software.
    If this is the wrong forum for this question, I apologize. Please direct me to where I should post this question.
    Thanks for your help.

    HI,
    Not sure if this will help but worth a try.
    Open a Finder window. Select your Home Folder in the Sidebar on the left. On the right open the Library folder then the Preferences folder.
    Look for a file similar to this: com.adobegolive.plist (not exact wording but close)
    Move that file to the Trash and restart your Mac. Try opening the site in GoLive now.
    Carolyn

  • Why can't I add keyboard shortcuts for Adobe GoLive 9?

    Since the demise of Unsanity's Menu Master on Leopard, I've been taking the more tedious (and problematic) route of using System Preferences > Keyboard & Mouse > Keyboard Shortcuts to add and modify keyboard shortcuts for menu actions.
    I just tried to add my first shortcut to Adobe GoLive 9, which resulted in this uninformative error dialog:
    "You cannot add keyboard shortcuts for the application Adobe GoLive 9."
    Why? (The only real problem I've had with the previous 11 applications is ambiguous menu items, i.e., the same menu action name in more than one menu sub-action.)
    (I'm now resorting to an even more tedious shortcut technique - QuicKeys X3. QuicKeys is great, but it's overkill for a simple keyboard shortcut.)

    I've found another:
    "You cannot add keyboard shortcuts for the application Adobe Reader."

  • Adobe GoLive 6.0 exe funktioniert nicht mehr

    Adobe GoLive 6.0
    "GoLive.exe funktioniert nicht"
    Diese Meldung erhalte ich ständig und ich weiß nicht was ich tun soll.
    Bis vor eine Woche lief das Programm reibungslos und nun stertet es
    nicht mehr.
    Wo liegt der Fehler.

    1. Mylenium hat natürlich in allem 100% recht.
    2. Trotzdem ist es einen Versuch wert, die Voreinstellungsdatei zu löschen und GoLive neu zu starten.
    Sie heißt irgendwas mit *.prf . Unter Windows 7 mit GoLive CS2 wäre sie so zu finden:
    C:\Users\[Dein_Benutzername]\AppData\Roaming\Adobe\Adobe GoLive\Adobe GoLive 8.prf
    MfG
    us-hh

  • Adobe GoLive is Dead.  Now What?

    Adobe announced today that GoLive is dead: http://www.macworld.com/article/133181/2008/04/golivedead.html
    I am a long time Adobe GoLive user having migrated from Pagemaker 3.0 to GoLive 6 to GoLive 9. My websites are not that complicated, and I know Dreamweaver has a lot of bells and whistles but it is probably too much for what I do. (or is it?)
    Can anyone recommend another program (freeware, shareware or commercial) for building and maintaining web sites that is easy to learn and use, or is Dreamweaver the way to go?????

    I've been going through the tutorials for Dreamweaver for the last couple of weeks and have converted my sites from Golive. Dreamweaver is not too bad, but there are some differences. I'm using the Lynda.com movies to work out a few specific issues and terms.
    Luckily, if you just get tired of how Dreamweaver treats your site, you can easily fix the code by hand.
    One thing, I've been using CSS when necessary with Golive for years (when it benefited me). With Dreamweaver you will get it shoved down your throat with all the extra crap code it will include. GoLive 9 was getting that way also, so there's always some cleanup required. If you already work well with sites entirely in CSS then you won't notice.

  • Migrate a Adobe GoLive website to Adobe Dreamweaver

    I need to migrate a Adobe GoLive website to Adobe Dreamweaver. I am running a Windows 7 64 bit machine and cannot get Dreamweaver to install from the original DVD or the downloaded installer from Adobe.com. I receive an error message indicating "Failed to launch." Any thoughts?

    What version of DW?
    You may be better off downloading it from Adobe and using the serial from your disks to activate it...
    Download and Installation Help
    Once it's up and running, start fresh with DW and a new site. There's no good way to convert an old GL site without a ton of manual fixing. The code GL produced was "pretty bad" back in the day, now I would consider it pretty much "hysterically outdated" and not worth attempting to salvage.

  • Adobe GoLive 9

    Wer kann mir helfen?
    Ich benutze zum Editieren meiner Webseiten Adobe GoLive 9.
    Wie kann ich einstellen, dass die Größe der Seite (Auflösung) sich dem jeweiligen Userbildschirm anpasst.
    Im Moment ist meine Seite nur in der geringsten Auflösung zu sehen - also bei PC´s mit höherer Auflösung immer kleiner und links.

    Ich vermute mal, dass du die Breitenangaben der diversen Seitenelemente (z.B. vertikale Navigationsleiste links, Contentbereich rechts etc) als Pixelwerte definiert hast.
    Die bessere Alternative wäre, mit CSS bzw. relativen Angaben (nennt man auch Fluid oder Liquid Layouts) zu arbeiten, also die Breitenangaben dieser Elemente als z.B.30% / 70% zu definieren.
    Was ich allerdings nicht weiß, ist, ob das in 2008 eingestellte GoLive überhaupt in Punkto CSS-Support so gut ausgestattet ist wie Dreamweaver ab ca. der Version CS3.
    Cheers,
    Günter

Maybe you are looking for