Adobe illustrator 'ctrl+c' not responding

Dear Adobe
I work for sierra atlantic and we purchased a license version, the problem is i am working in illustrator and photoshop at the same time, when i create a graphic in illustrator, i copy it and paste in photoshop, but when i am done in illustrator and pressed ctrl+c, and jumped to photoshop the system just hangover or does not respond for around 5mins or more, and then it comes back, this is making my work very slow, please give me a suggestion how to get out this problem, thank you
regards
santiswaroop.k

It does not sound like this would be a problem, but just in case, do you have an extraordinary amount of points in your art?
Are using fonts in your file?
I am thinking that there is a font data base that might be corrupt. There are utilities that can clear these files for you Mylenium would have to help you on that one though if you are running a pc.
Try to create a new user account and log into that new user account and see if the problem goes away if it does we have a better idea what might be happening.

Similar Messages

Adobe camera raw will not respond in bridge cs6?

adobe camera raw does not respond in adobe bridge? I am trying to open Jpegs, which i have previously been able to do so by right clicking and opening in adobe camera raw. Now it is unresponsive.

dj1461986
You are definitely in the wrong forum for Bridge CS6 and Adobe Camera Raw. You have posted in the Adobe Premiere Elements Forum (video editing focus).
You probably want to be posting in the Photoshop Forum.
http://forums.adobe.com/community/photoshop
My preliminary findings suggest possible workaround
a. Open camera raw in Photoshop 5 or 5.5 and then open edited raw image in Bridge CS6
or
b. There is a preferences route to check out.
Not being a Photoshop user, this is a quick suggestion where you might start looking. This is apparently a known issue.
The Photoshop users should be able to give you all the details and options you have for workarounds for now.
ATR
Add On...Please repost in Photoshop Forum or wait for a moderator here to see your thread here and move it from here to there.

Adobe photoshop cs6 is not responding?

adobe photoshop cs6 usually not respond?
my system info:
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x32
Operating System: Windows 7 32-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
Physical processor count: 2
Processor speed: 2594 MHz
Built-in memory: 3485 MB
Free memory: 1110 MB
Memory available to Photoshop: 1670 MB
Memory used by Photoshop: 60 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: Intel
Video Card Renderer: Intel(R) HD Graphics
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 768, right: 1366
Video Card Number: 1
Video Card: Intel(R) HD Graphics
OpenCL Unavailable
Driver Version: 9.17.10.2932
Driver Date: 20121212000000.000000-000
Video Card Driver: igdumd32.dll,igd10umd32.dll,igd10umd32.dll
Video Mode: 1366 x 768 x 4294967296 colors
Video Card Caption: Intel(R) HD Graphics
Video Card Memory: 1551 MB
Video Rect Texture Size: 8192
Serial number: 92628701192123445467
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6\
Temporary file path: C:\Users\HOME\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
Startup, 46.6G, 8.78G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6\Plug-ins\
Additional Plug-ins folder: not set
How can i fix this problem?
Problem signature:
Problem Event Name:          APPCRASH
Application Name:          Photoshop.exe
Application Version:          13.0.0.0
Application Timestamp:          4f61beba
Fault Module Name:          Photoshop.exe
Fault Module Version:          13.0.0.0
Fault Module Timestamp:          4f61beba
Exception Code:          c0000005
Exception Offset:          0149fab9
OS Version:          6.1.7601.2.1.0.256.1
Locale ID:          1033
Additional Information 1:          0a9e
Additional Information 2:          0a9e372d3b4ad19135b953a78882e789
Additional Information 3:          0a9e
Additional Information 4:          0a9e372d3b4ad19135b953a78882e789

You really need to install the CS6 updates. You haven't installed any of the updates.
And you need to update your Intel video card driver.

My Adobe Illustrator CS6 is not opening.

My Adobe Illustrator CS6 is not opening. every time I try to open it it gives me this window "To open “Adobe Illustrator CS6.app” you need to install the legacy Java SE 6 runtime." Has anyone comme across this and is there a solution for this I need help please.

Java for Mac OS X v10.6 Update 17

I'm running OS X Yosemite, Version 10.10 My Adobe Illustrator CS6 is not opening. I have install the legacy Java SE 6 runtime, not working

I'm running OS X Yosemite, Version 10.10 My Adobe Illustrator CS6 is not opening. I have install the legacy Java SE 6 runtime, not working
Also when I click on More Info... button I I get support.apple.com website page, which is blank. When I click on the OK button, same result.
I need help with this, is anyone out there experiencing the same phenomena?

How about this one
Apple Java for Mac | MacUpdate
or
Java for OS X 2014-001

Adobe Illustrator Draw will not export to desktop Illustrator with the photo layer turned on.

Adobe Illustrator Draw will not export to desktop Illustrator with the photo layer turned on. This severely strains my workflow and makes it incredibly hard to add the image after it is exported to the desktop Illustrator. Is this being fixed??

This is a new bug in our latest release, and we apologize for not catching it before it went out. We are putting together a patch to address the issue. The only workaround at this point is to delete the photo and then send to Illustrator again.
Thank you,
Frank
Draw Engineering

"The Adobe DRM Activator is not responding"

I am new to this whole world of on-line books and am trying to download a PDF file for one of my textbooks at my on-line college. I have Adobe 7.0.9 (they told us not to use 8.0) and have attempted to "authorize" my computer for two days now. Everytime I try it, I get the same error message "the adobe DRM activator is not responding". I have turned off my pop-up blocker and disabled the firewall. Any other suggestions? Thanks!

I am experiencing the same issue as Jennifer. Any suggestions, I've tried downloading and reinstalling with no help. Please provide some feedback.
Thanks.
M.
"The Adobe DRM Activator is not responding"
Jennifer Koehlinger - 05:24pm Aug 30, 2007 Pacific
I am new to this whole world of on-line books and am trying to download a PDF file for one of my textbooks at my on-line college. I have Adobe 7.0.9 (they told us not to use 8.0) and have attempted to "authorize" my computer for two days now. Everytime I try it, I get the same error message "the adobe DRM activator is not responding". I have turned off my pop-up blocker and disabled the firewall. Any other suggestions? Thanks!

Adobe elements 10 is not responding--program keeps crashing

I have elements 10 and it is forever crashing with message "Adobe Elements 10 is not responding."

Ken, thank you for responding.
When I get the error, I’m given two options, cancel the program or wait until Elements 10 responds. Some time if I wait long enough it will respond but only to crash again. This seldom happens in Editor.
This is a new catalogue on the new computer. I never had this problem with earlier versions of Elements—only with 9 and 10.
Thank you,
Robert

Illustrator CS4 application not responding after install

Anyone knows how to slove this problem? I got the creative suite CS4 today and after installed dreamweaver, photoshop, acrobat reader works fine and fast except illustrator. When I opened the application and click on open a file or create a file, the application will show "Not Responding".
Anyone know how to solve it? I am using vista

Wade,
You said that Adobe's employees come and visit this forum. And you are right, Adobe's employees disguised as a regular users are here all the time.
When the CEO said Adobe hired Low Level employees I did not know then what he meant. Now I know is for damage control.
I am not only one as you can only wish. Go to Adobe Feedback forum: http://forums.adobe.com/community/general/adobedotcom_feedback
Afraid of the wolves?
Can count higher than 1000.
But you have not answer the question. Where is the CS4 update?

Adobe Illustrator CS5 - Fonts not found

We are changing our user from a Mac to a Windows (7) based computer and we are running in to issues with files that she created on the Mac version of Adobe Illustrator. She used some fonts (AGaramond-BoldItalic for example) and it works great on the Mac. I copied all the font files to the windows computer and made sure they work (opened Illustrator and created a document with the fonts).
The issue now is that when we open the old documents from the Mac on the Windows computer it gives an error "Font not found on the system; missing font has been substituted."
I am not sure how to tell the file that the fonts Are there because when it opens all the fonts are to a default Arial.
So far I have tried:
Removing all Adobefnt*.lst files
Resetting adobe settings by holding ctrl+alt+shift and opening the program
Testing the file on a brand new user account
uninstall and reinstall the program
None of these have worked.

There are more cache files than the adobefnt files. See here for more detailed instructions on cleaning your font caches. That said, it sounds likely that the issue is that your fonts are mac only, as Larry said above. You should be able to use Type -> Find Font... to replace them with whatever version you have on the PC but watch for formatting/flow changes. Also, my condolences to your designer. ;-)

Mac Pro/Illustrator/In-Design - not responding???

I inherited my Mac Pro from a past colleague at my office. I have tons of design work I need to do but I'm finding major problems with the Mac. For instance - I will open an Illustrator or In-Design File - this could be something I have saved on the computer or it could be something I have just downloaded - either way - when I open the file and go to "Save As" or "Save" it takes the Mac 2-3 minutes (if not longer) to save the file. If during this time I look at the Activity Monitor to see what is occurring - the program says "not responding" but when I'm in the program and try to move the mouse - the color wheel is processing indicating something is happening. This happens every time I try and save any file type. I think something in the computer is corrupt and I'm not sure what to do for a resolution. My helpdesk cannot determine the problem. What should take only a few minutes to perform is taking 30-45 due to how slow the computer is. The same problem occurs with pdf files too. Normal office products as not affected. I've ran the software update and also repaired disk permissions but still no luck. We wiped the computer of the old users info and created a new account under my name - I'm not sure if this would have caused the problem. Please help on this - it's getting extremely frustrating because everyone I've talked to says this should not be occurring with this computer but no one knows how to fix it.
Thank you!!!

I inherited my Mac Pro from a past colleague at my office. I have tons of design work I need to do but I'm finding major problems with the Mac.
For instance - I will open an Illustrator or In-Design File - this could be something I have saved on the computer or it could be something I have just downloaded - either way - when I open the file and go to "Save As" or "Save" it takes the Mac 2-3 minutes (if not longer) to save the file.
If during this time I look at the Activity Monitor to see what is occurring - the program says "not responding" but when I'm in the program and try to move the mouse - the color wheel is processing indicating something is happening.
This happens every time I try and save any file type. I think something in the computer is corrupt and I'm not sure what to do for a resolution.
My helpdesk cannot determine the problem. What should take only a few minutes to perform is taking 30-45 due to how slow the computer is. The same problem occurs with pdf files too.
I've ran the software update and also repaired disk permissions but still no luck. We wiped the computer of the old users info and created a new account under my name - I'm not sure if this would have caused the problem.
Please help on this - it's getting extremely frustrating because everyone I've talked to says this should not be occurring with this computer but no one knows how to fix it.
Buy a new set of drives. One for system, one for scratch, one for media files, one for backup. That is a good start. Then add enough drives for backups so you have backups of system; of data; two sets or more; and emergency boot drive.
Make sure you have more than enough memory. Graphics? 8GB is a good start. If you work with 2GB files, double that.
Don't rely on Apple Disk Utility First Aid, Alsoft Disk Warrior at the least - and you need to repair the drive and files, not just running Repair Permissions. Maybe a good How-To on maintenance and troubleshooting manual.
Start from scratch. If you are using Leopard, buy 10.5.6 DVD and use that to start with.
If you use SuperDuper to backup and clone your drives; and Disk Warrior to repair the drive and file system you will be a long way - but at this point, keep the old system and files where they are as "backup" and copy everything to new drive to work from.
And if you work with large files, then working off stripped RAID for scratch and saves helps. Do not use the same drive for the system AND scratch editing AND for files and media libraries. Separate those out.
Some tips that focus on Photoshop but also at configuring a system.
http://macperformanceguide.com/OptimizingPhotoshop-Intro.html
http://www.adobe.com/go/kb401089
http://www.macgurus.com/guides/storageaccelguide.php
http://www.macgurus.com/guides/photoshopguide.php

OLE embedded Adobe Illustrator Artwork files not rendering properly

I'm using BroadVision's Quicksilver. I've attempted to embed AI Artwork
files as OLE objects (linked and not linked), but they don't render within
Quicksilver. After working with their support team, they came to the
conclusion that it was an Adobe Illustrator issue because they were
able to reproduce the issue in Wordpad (not MS Word).
The problem can be reproduced by the following steps (tested in Vista,
XP, & Server 2008):
:- Open Wordpad
:- Click Insert -> Object -> Create From File -> Browse -> Find and select a file -> Open
Other variations on this theme encounter the same problem, including
pasting it from the clipboard.
If you open a Wordpad document in MS Word and embed the OLE
object, it saves a preview of the image which is visible from Wordpad
if you open it later on (as long as you don't link to the original; if you do,
and attempt to update the link, the preview image will go away). However,
subsequent alterations of the OLE object don't show up in Wordpad -- rather,
the image that was rendered in Word continues to be displayed (unless, of
course, you open it in MS Word again and re-save after the link is updated).
It appears the support team at another company encountered a user
experiencing the same or similar issues with their product, but on
Illustrator CS2 as opposed to CS4:
http://www.graphpad.com/faq/viewfaq.cfm?faq=1309
Unfortunately, the "export to another format" workaround won't suffice.
We're working with thousands of Illustrator artwork files that need to be
version controlled, and other technical documents will link to the same
Illustrator file. When an AI file is updated, all technical documents
need to use the altered version; linking to an exported version of the
file just creates one more link in the chain that can create problems
or confusion.
Even if the version control stuff wasn't an issue, exporting to other
formats seems rather limited. If we export to other formats (eg, pdf)
the images render poorly compared to what they look like in AI.
We've tried a number of things to work around this:
* Make sure AI [is/is not] already running
* Rasterize paths
* Alter the size of the image in AI
* Alter the size of the object in the target application
* 'Save as' with a different version of AI selected (for all versions)
* Saving as an EPS or PDF -- the former has the same rendering issue
as AI files; the latter renders but the drawing is blocky, probably because
the graphics are being rendered at a very low resolution and scaled up
after the fact.
* Looking for or changing preferences in Illustrator that might affect it
* Altering color scheme and various other similar settings
* CS5 trial version -- same problem as CS4
* Save the [wordpad] document -> close -> re-open
* Switching between 'display as icon' and displaying the image
* Copy & paste from various sources (from AI -> Wordpad,
MS Word -> Wordpad, etc)
The only way I can get it to render in Wordpad (or quicksilver for that matter)
is if I embed the AI file in a Word/RTF document, then embed that in
the target application (which is awfully convoluted). Furthermore, if the
embedded Word/RTF file links to the original file, when you open the
document containing the embedded Word/RTF it doesn't attempt to
update from the linked AI file, just the linked Word/RTF file.
I'm sure there's other things we've tried to resolve this, but that's what comes
to mind right now.
If anyone can help with this, or clue me in that it's a bug in AI, I'd sincerely
appreciate it.
-Brian

Well, no offense
-=-=-=-=-=-=-=-=-=-=-=-=-
None taken. I'm helping someone else solve a technical problem, I'm just not questioning their approach; I'm not a tech writer, so I'll pass your suggestions on.
-=-=-=-=-=-=-=-=-=-=-=-=-
(...) you are trying to solve one hell of a crooked workflow on the wrong end and the one fatal flaw being that you insist on using an office tool to create layouts and expecting it to render print-ready documents. That just cannot work. Even the most stubborn tech writers I occasionally work with, recognize the need for eventually firing this at InDesign/ InCopy/ Framemaker and associated server versions and fuse the imported RTF/ Word documents and illustrations based on template layouts, scripting and rule-based formatting, which can all happen automnatically on a server with the respective software.
-=-=-=-=-=-=-=-=-=-=-=-=-
I was mistaken when I described how things are version controlled. They would prefer to embed the AI images in each document and have each document be version controlled (that is, if the image changes it should /not/ affect other documents).
However, I wasn't mistaken when I said there are thousands of already developed AI images. The team working with these images has already procured a volume license for Framemaker and is hesitant to purchase other software unless there's no alternative, or the time savings would justify it. I wish I could comment on the efficacy of your suggestion, but I'm not a tech writer; I'm unfamiliar with InDesign, InCopy, and FrameMaker.
-=-=-=-=-=-=-=-=-=-=-=-=-
So for what it's worth, you are probably wasting your time and resources on something that by its nature starts out with a limited process. I'm not even sure if AI fully supports OLE. I seem to remember having read about it not supporting several features and commands....
-=-=-=-=-=-=-=-=-=-=-=-=-
-=-=-=-=-=-=-=-=-=-=-=-=-
If we export to other formats (eg, pdf) the images render poorly compared to what they look like in AI.
What do you mean? If they look "bad" in Acrobat or something, then you are simply using the wrong export settings. which is perfectly fixable.
-=-=-=-=-=-=-=-=-=-=-=-=-
In Acrobat the SV graphics look beautiful at any scale, but if the PDF is OLE embedded in another application it looks terrible.
-=-=-=-=-=-=-=-=-=-=-=-=-
If they look "bad" within your word documents, then we pretty much return to what I said in the first paragraph - there's a good chance it's simply Word rendering the artwork poorly due to its limited abilities of dealing with graphics of any kind. I would even think that manually changing the graphics properties would improve appearance then....
-=-=-=-=-=-=-=-=-=-=-=-=-
I'm not an expert on OLE; I made the [potentially bad] assumption that Acrobat would be responsible for rendering the graphic when a PDF is OLE embedded, so the application making use of the object would have limited control over the quality of the image it receives (if my assumption were correct anyway).
I know the host process can specify whether the image is rendered as an EMF or WMF image, otherwise I know very little about the OLE API and what limitations the host process can impose.
I'll keep tinkering to see if the PDF solution can be made to work.
In the meantime, would anyone like to make a determination as to whether this is a real bug in AI or not?
-Brian

Adobe Illustrator file will not display correctly when logged in as a user

I am working with an Adobe Illustrator CS2 file that will open and display correctly if I log in as Administrator, but will not display correctly if I am logged on as a user. The error message is that there is not enough memory to display the file correctly and I am forced into preview mode. The user Home folder is on a server. Other than this, I have made certain that the criteria for opening the file match under both interfaces. I have opened the AI CS2 file on other Macs and it opens fine. I conclude that the problem is with the user Home folder, but beyond that, I'm stumped. Any help will be appreciated.

After I filed a bug-report an Apple engineer contacted me, and asked me to try running java in headless mode: http://java.sun.com/developer/technicalArticles/J2SE/Desktop/headless/
That solved the problem!

Adobe Illustrator CS6 will not open.

I have a problem: the illustrator app will not open. I get the pop-up: To open "Adobe Illustrator CS6" you need to install the legacy Java SE 6 runtime. Click "More Info..." to visit the legacy Java SE 6 download website.
Both clicking "More Info..." and "OK" only make the pop-up disappear, but lead absolutely nowhere.
From Oracle.com I have already downloaded and installed 'jre-8u25-macosx-x64.dmg'. After install and restart i keep getting the same pop-up as before and i still can't open Ai. Any advice?
MBP 5,5 13 inch, Yosemite

hi,
I updated from mavericks to Yosemite today which was a very bad idea. I had issues with my internal sound adapter and the system start is now very slow. I might going back to mavericks..
However, I wish the above link you gave here would work. After clicking the blue download button nothing happens. Any other idea how I could go back from my actual java 8-31 back to java 6?
Thanks, H

Adobe Illustrator CC will not launch

My Adobe Illustrator CC simply will not launch. It only opens a dialog that says, "Adobe Illustrator CC 2014 quit unexpectedly." There is a button that says "Reopen", but when I click there, it only opens the same dialog page. I have filled out the problem, which is suppose to notify the problem to Apple but so far so results have come to me with what might be wrong.
Can anyone, please help me to get Illustrator up and running again. Thanks

Cathy,
I am afraid that Adobe will be closed down for the holiday be the end of the day, so I believ you had better act today.
Creative Cloud support (all Creative Cloud customer service issues, chat open between 5AM and 7PM PST/PDT on workdays)
http://helpx.adobe.com/x-productkb/global/service-ccm.html
Adobe Support (phone),
http://helpx.adobe.com/adobe-connect/adobe-connect-phone-numbers.html

Adobe illustrator 'ctrl+c' not responding

Similar Messages

Maybe you are looking for