Adobe Illustrator Not Working After Windows 7 Restore

My Windows crashed recently and it restored to an earlier version. The earlier version did not have the Creative Cloud registered. So while I have all the files under the Program Files, they do not appear anywhere else. I thought of uninstalling but they are not appearing in the uninstall list. I tried to delete the folders (Adobe) but it didnt delete them all the way.
So at the moment, I can't uninstall them, delete the folders or re-install the programs. I dont know what to do? Can someone help?

Run the Creative Cloud Cleaner Tool, reinstall.
Mylenium

Similar Messages

My laser jet 100 color MFP M175nw is not working after windows 8.1 upgrade,

my laser jet 100 color MFP M175nw is not working after windows 8.1 upgrade, driver on your website fails to setup at 83 % with an error message

Welcome to the HP Forums MillaMagia,
I see by your post that the USB isn't being recognized.
I can help you with this issue.
Are you using the same USB cable? (known good USB cable)
You want to use the normal USB slot 2.0 cable and not the latest USB 3.0.
USB 3.0 are supposed to be backwards compatible.
Try another USB port on the Laptop, some of the USB ports are more powered then others.
I have provided a document to see if the printer is partially recognized in the device manager, which is causing the printer not to be recognized again. (the uninstall from the CD should have removed the entry and the printer from the registry)
Leave the printer turned on and the USB cable connected directly to the computer and the printer's power cord directly into a wall outlet.
How do I get into Windows Device Manager?
Here is a document for Identifying problems in Windows Device Manager.
Check to see if there are any hardware driver conflicts, you might see a ! mark or a red x beside a device with a conflict or unknown device, look under universal serial bus controllers, look for USB printing support or mass storage device, delete the entry by right clicking and select uninstall, OK.
Let me know how it was listed. (screen shots welcome)
If this is a Laptop then check the power management settings.
Access the device manager. Windows 8-How do I access the Device Manager.
Select universal serial bus controllers from the list, for each USB root hub, right click and left click on properties, for power management remove the check mark for "Allow the computer to turn off this device to save power". It allows the computer to limit or turn off power for this device.
Disconnect the USB, run the full uninstall and reinstall the printer software again.
If you need further assistance, let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Adobe reader not working after cs5 install

adobe reader not working after cs5 install

Nobody can tell you anything without proper system info or other technical details like exact version info.
Mylenium

Fingerprint Reader not working after windows password reset

Hi There
I was using windows login (single admin user) and fingerprint reader to login to my Thinkpad T510. Yesterday night I changed windows password and I didn't update finger print. Unfortunately I am not able to login when I tried to login using windows login today, I forgot the password and when I tried finger print reader it is just throwing error.
Why finger print is not working after windows password reset? What should I do to login?
Help would be appreciated!!

I just called the tech support just now? I just asked the 'why the finger print reader not recognizing the finger print after changing windows password?', and he gave the following answers
1. You should change fingerprint while changing windows password. I don't understand the reason behind it, btw is this true?
2. We can't do anything for this issue.

Beats Audio Control Panel software not working after Windows 10 upgrade.

Beats Audio Control Panel software not working after Windows 10 upgrade. the Beats sound enhancement is useless in WIndows 10. When opening the Windows 10 sound properties I'm getting this box message: Auido enhancement problem Windows has detected the audio enhancement for the following device are causing problems: Speakers / Headphones (IDT High Definition Audio Codec) Woud you like to disable driver enhancement for this device? IDT High Definition Audio CodecBeats Audio Control Panel version6.10.6491.02013.11.2009:43:18 Please provide some kind of fix for this?

Well, it has been a long road on the Win 10 upgrade. At first I got the same error message as above, but after deleting the Dolby Advanced Audio v2 in Win 10 using Control Panel Programs and Features and rebooting, I got into the continual BSOD upon reboot. Here are the steps I took to at least get stable on Windows 10. First, I rolled back to Windows 8.1 using the advanced feature in the BSOD recovery options. Once back in Win 8.1, I deleted the Dolby Advanced Audio v2 using Add/Remove Programs in Control Panel. Then I downloaded the Win 10 update and re-installed it. Once that completed, I updated the Intel Graphics driver under the display adapters (on my G780 it is an Intel HD Graphics 4000, and the driver can be found at https://downloadcenter.intel.com/). Currently I am running version 10.18.10.4252 for my machine. Then, under the Device Manager, I updated the Conexant SmartAudio HD driver under the Sound, video, and game controllers. That driver is currently at 8.66.4.50 and was automatically downloaded from the web when I requested to update driver. I also changed several others settings such as Notify to schedule restart after updates are installed instead of automatic (under Settings --> Update & Security --> Advanced Options) and Do you want Windows to download driver software and realistic icons for your devices? --> No, let me choose what to do, never install driver software from Windows Update. After that, I shut down the machine, waited a moment and booted back up. I have no idea why this helped or if it is overkill, but I am stable and running without a fear of rebooting now. Hope this helps if someone else is having this same issue.

Touch screen not working after windows 10

Touch screen is not working after windows 10 was down loaded. Also the zoom keeps changing on it's own. Does anyone know how to fix this?

Could you provide the unit's Model name/number?

My adobe is not working with Windows 7 it says "program not working"

My adobe does not worked with I have tried 9 & 10 both versions. It does not seem to work with Windows 7.

Adobe Reader X works very well on Windows 7.
Please give us the exact error message you're getting; "program not working" is not a message that Windows or Adobe Reader would issue.

Hp pavillion dv6000 webcam not working after windows 7

my webcam does not show up or even work after windows 7?

Same problem here
I have a dv6000 laptop , freshly "upgraded"to windows 7.
device manager does not see the webcam.
I have downloaded both sp33544.exe and sp 35414.exe hoping that one of them would work (using xp compatibility and runing as administrator).
no luck!
any help would be greatly appreciated
thanks,
jmpaq

Compaq Presario CQ62 DVD not working after Windows 7 automatic install of upgrades

The DVD in my Compaq CQ62 stopped working after Windows 7 automatically installed updates. The driver seems to be corrupted. When I open Device Manager, the DVD comes up as hp DVD RW AD-7701H SATA CdRom Device and the device status displays...A driver (service) for this device has been disabled. An alternate driver may be providing this functionality. (Code 32).. There are two drivers installed--cdrom.sys from Microsoft, File Version 6.1.7600.16385(win7_rtm.090713-1255) and PxHlpa64.sys File Version 2.03.32a from Sonic Solutions. If anyone knows the link to download the new driver or how to resolve this problem please let me know.

We are not sure what might have caused this issue. You may try removing the affected filter drivers and check. This has helped few.
To do this, follow these steps:
1. Click Start , type regedit in the Start Search box, and then click regedit in the Programs list.
If you are prompted for an administrator password or confirmation, type your password, or click Continue.
2. Locate, and then click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
Caution There can be many instances of the registry subkey that is mentioned in step 2. You must make sure that you are in the appropriate registry subkey before modifying the UpperFilters and the LowerFilters values. To verify that you are in the appropriate registry subkey, make sure that the Default data value is DVD/CD-ROM and the Class data value is CDROM.
3. In the right pane, right-click UpperFilters, and then click Delete.
4. Click Yes to confirm the removal of the UpperFilters registry entry.
5. In the right pane, right-click LowerFilters, and then click Delete.
6. Click Yes to confirm the removal of the LowerFilters registry entry.
7. Exit Registry Editor, and then restart the computer.
Note After you remove the UpperFilters registry entry and the LowerFilters registry entry, you may lose functionality in certain programs such as CD recording programs. In this scenario, you must reinstall any affected programs.
See which Windows updates are installed
http://windows.microsoft.com/en-US/windows7/See-which-Windows-updates-are-installed

Z580 Dolby digital plus not working after Windows 10 upgrade

Dolby Digital Plus is not working after I installed Windows 10 upgrade, I've tried several things to fix the problem with no luck, has anyone else experienced the same problem and found a fix ???

Hi,I have tried by switching dolby on but its not showing any difference. The app is installed but not working you can do on/off, set equlaizer but it doesnot show any effect. Recently i have upgraded to windows10.I used to love the Dolby experience but now its not working and its really disappointment for music lovers & gamers. Please provide any help on this issue. ThanksGopal

T43 Touch Pad not working after Window 7 installation.

The Touch Pad on my T43 is not working with Window 7. I have tried several drivers without success; any suggestions??
Solved!
Go to Solution.

Did you try to install system update 4.0 to get all the correct drivers?
You can also enable/disable the touchpad in BIOS so you could doublecheck it's actually enabled. You can also enable/disable touchpad by going into the control panel, mouse and the Ultranav tab if you have the correct driver installed. Another options is to press Fn-F8 to enable/disable touchpad, but this one also require some drivers and software from Lenovo to work.
-gan

Adobe Reader not working after update to version XI

I have had Adbobe Reader installed on my PC for ages and have been using this to view my PDF files without any issues. However, Adobe Reader updated automatically to version XI a few days ago. Since then, I have been completely unable to open Adobe Reader at all. The screen does not load up fully with only the top menu bar visible and the remainder a blank grey screen with all menu options inactive or greyed out, and sometimes crashes and closes automatically after a few seconds. I am unable to view any PDF file, even those which I previous viewed with no issues. I have tried running the Adober Cleaner tool but this has not helped. I have tried uninstalling and reinstalling Adobe Reader numerous times with no success. I have also tried reinstalling previous versions of Adober Reader but have idential issues with these too. I have tried checking system compatability using the troubleshooter tool but this appears to be fine, and have also tried disactivating my AntiVirus/firewall software (Norton 360). I am running a Windows 7 operating system in English (UK). Any help gratefully received as Adobe will not offer telephone assistance as this is freeware! Thanks in advance.

You may have given up by now.. I just hope this advice helps some other user..
Have encountered this isssue several times..
several points I will note: of the machines I have worked on to date: only 1 did not have malware, all thus far have been 64bit Win7 and it seems after update to Reader 11.03..
but each so far I have:
- Checked for and removed any malware and or strange BHO's and Toolbars
- cleared all temp files including temporary internet
- removed Adobe reader and ANY OTHER PDF READER and reinstalled Adobe reader
- Checked that PDF's are associating with Adobe reader (sounds silly )
- Started the PC in Safe Mode - check reader works
                                             - Disabled Protected Mode in preferences: then disabled antivirus, along with most startup services and applications
                                             - restarted in normal mode - Check PDF opens normally: 100% of time for me it worked
                                             - re-enabled the anti-virus - restarted PC and rechecked
                                             - re-enable services and applications by group - restart and retest
So far that is all that I have needed to do.
All the best
Message was edited by: Glenn Hurse - missed the Disable Protected mode step.. lazy typist

"Indexing is not running" after Windows 7 restore

I recently had a laptop hard drive poop out. I bought a new one and and accomplished a full restore from a fresh backup managed by Lenovo Rescue and Recovery 4.3. I was initially impressed because almost everything is 100%. Windows and Office had to be re-activated. System Restore had to have the "old C: Drive" deleted and the new one turned on. But the uber-critical Windows Search (Indexing) is broken. Most of the options on the Indexing Options panel are dithered. The event log is streaming the same three errors until I disable the service entirely. Rebuild will not work. Screen captures are available.
None of the stock "fix the index" techniques worked (I already have 2 hours into it using Google et al.). This is going to require someone with intimate knowledge of how the WINDOWS 7 indexing system works and how to "reset" it
In a maybe-related problem, I cannot do any System Updates either.
Rebuilding this system is simple too painful so I need the restore to work.
TIA.

With your 2 hours of googleing, have you found this thread or tried the things they recommend to try?
http://social.answers.microsoft.com/Forums/en-US/w7performance/thread/223fe398-3170-4a18-bff8-1c5499...
IT Specialist and Consultant
Lenovo Tablet Evangelist
Current Machines: IdeaCentre A300, ThinkPad Tablet, IdeaPad U410, and Yoga 3 Pro Touch
Deutsche Community Comunidad en Español
Lenovo - the latest in DOtabs, DOpads, DOcentre's, DOstations and DOservers!

Keyboard and touchpad not working after Windows 10 update

after udating windows 10 on my probook 4440s keyboard and touchpad not working. if i press a key for 10seconds the key then shows up in the screen. and touchpad is worst. it freezes all the time barely moves. but with usb mouse it works fine

It's known that installing Windows from an external DVD drive on a Mid 2013 MacBook Air causes that the keyboard doesn't work after finishing the installation. The fix is to install Windows by using a USB drive. See > http://support.apple.com/kb/TS4599

OneKey Overclocking Not Working After Windows 10 upgrade

I upgraded my OS to Windows 10, and after the instalation, I realized that when i press the OVERCLOCK button on my to on my desktop to run the overclock it doesnt light up or run nor can i run the aplication when i click it on my computer (the one that allows me to switch from basic, extreme etc.) I would really appreaciate some help with this. Thanks (My Desktop is a Erazer x510 desktop 10140)

Lenovo Pls solve this Issue quickly this is one the main reasons I bought this machine and now its not working just sent out some privet msgs to lenovo tech staff i hope they answer with a fix.

Adobe Illustrator Not Working After Windows 7 Restore

Similar Messages

Maybe you are looking for