Adobe InDesign CS4 fonts - where'd they go?

Using a PC.  I work for a municipal govt which finally upgraded me from adobe CS to CS4 this past year.  I mostly use InDesign for my work publications and was thrilled to have some new fonts with the new CS4 on my system (fonts like Baveuse, Blue Highway, Burnstown Dam, Carbon Block, Kredit, Earwig Factory, Hurry Up, Planet Benson2, Teen, Pupcat and more).  
But within the last month, all of these particular fonts (and others) have totally disappeared.  I can't use them at all in InDesign now.  So how do I get them back?  Were these particular fonts on a certain install disk?  My IT dept reinstalled the entire suite yesterday, but it didn't bring back the missing fonts...
Also where are fonts supposed to be stored on my computer? (If they are supposed to be in C:\Program Files\Adobe\Adobe InDesign CS4\Fonts - there's nothing in this folder at all.) 
I am by no means an expert with CS4, so if you can give me any help, please give it to me in layperson terms.  I'm trying to do the best I can here. I appreciate your responses in advance. Thanks!

Also where are fonts supposed to be stored on my computer? (If they are supposed to be in C:\Program Files\Adobe\Adobe InDesign CS4\Fonts - there's nothing in this folder at all.)
Well, you can put fonts there, just by dragging them off the disks and dropping them in to that folder - if you do that, then InDesign can use the fonts, but no other programs will be able to do so.
You didn't say which version of Windows you were using, but if you're using Windows 7, you can right-click on any font file and choose "Install" depending on your system settings. That will make the fonts available to all the programs on your computer, not just InDesign. If your IT department understands that you're an InDesign user who needs to be able to install fonts, that method will work. If it doesn't work, it'll give you an error message that is probably NOT "Hey, you're not allowed to install fonts" but "These font files are corrupt." If you see that, it probably means that your IT department has not given you the power of installing fonts, which means they'd need to do it.
In Windows XP, you actually have to navigate to the Fonts folder (Start -> Settings -> Control Panel -> Fonts) and then choose File -> Install Font.

Similar Messages

  • I recently bought and installed Adobe InDesign CS4. It does not have some fonts I want, e.g., Papyru

         I recently bought and installed Adobe InDesign CS4. It does not have some fonts I want, e.g., Papyrus Bold. I copied it from the Windows XP Fonts folder into the InDesign Font folder, which, for starters, was empty (even though when I open the InDesign application its inherent fonts are available). I have gone to online Help and tried different things, but I still cannot get Papyrus Bold when I open my file.
         Where are the InDesign fonts stored, if not in the InDesign Fonts folder?
         How can I make the fonts that are in my Windows XP to be available in InDesign?
         Thank you.
         Andrew

         Peter,
         Thanks for your quick reply.
         I don’t see why there should be a problem with the Papyrus font I copied from Windows, since it works just fine in Word.
    It is listed in the Windows XP/Fonts folder as Open Type, although in brackets beneath it has “True Type.”
         Note: the Adobe InDesign Fonts folder was empty when I first viewed it (except for my attempted copies of Papyrus and a couple of Lucidas). Where are the inherent InDesign fonts stored, if not there?
         Thanks again for your attention.
         Andy (ColorsAce)

  • Adobe InDesign CS4 ME (Middle Eastern Version) AND fonts

    hello,
    does someone know, which Fonts are in "Adobe Indesign CS4 ME (middle eastern version)"  out-of-the-box (without Tasmeem!)?
    We have real trouble to find out in advance, what kind of fonts are included or supported (or not).
    thank you.
    knuth

    I'm not 100% sure on this answer, but this should at least be helpful:
    The fonts in the InDesign fonts folder in CS4 are:
    AlQudsWide_Bold.otf
    Hasan_Hiba_Alef.otf
    EMIRI.otf
    Basim_Marah_Beh.otf
    Nassim-Semibold.otf
    Arabetics_Mehdi.otf
    Nassim-Bold.otf
    AlQudsWide_Regular.otf
    Nassim-Medium.otf
    DT_Qarandash_Beh.otf
    NASKRG.otf
    Nassim-Regular.otf
    Hasan_Noor_Alef.otf
    Nassim-Heavy.otf
    There are others in the Adobe general fonts folder (most notably the extended family of Boutros Ads Pro), but I don't know if this was installed by CS4 or a previous version of InDesign. Here's a screenshot of the Arabic fonts currently installed on my system (none of them were purchased, and probably mostly installed by one of the Creative Suites).
    Harbs
    in-tools.com

  • Missing font makes Adobe InDesign CS4 6.0.4 crash

    Hi!
    I am having a problem with the latest version of Adobe InDesign CS4 (v 6.0.4).
    I opened an old document which contained two missing fonts.
    I was able to correct the first one by changing it to an existing font.
    But when I tried to correct the second one, the application crashed.
    I did this:
    1. Opened the document with the missing font (the first font was now already corrected).
    2. In the warning dialog window saying a font was missing, I clicked "Find Font".
    3. The missing font was called "Helvetica (T1) Bold Narrow". I set it to be replaced by "Helvetica Regular".
    4. Then I clicked "Change All".
    5. Indesign CS4 crashes.
    This is the information about the missing font (note that it says "First Used: na" which is strange):
    Filename: <not installed>
    Full Name: Helvetica
    First Used: NA
    Font: Helvetica (T1) Bold Narrow
    PostScript Name: Helvetica-Narrow-Bold
    Style: Bold Narrow
    Type: Type 1
    Version: 
    Restrictions: Unkonwn (Font is missing)
    Path: Unknown (Font is missing)
    Character Count: 27
    Style Count: 0
    Styles: 
    Page: none
    Does anyone have a solution, or is this a bug?
    Thanks

    Hi! Thanks for your answer.
    I am using Windows XP (SP3).
    I tried to export my INDD file (ID CS4 format) to an INX file.
    But that also made InDesign crash (perhaps because of the font thing).
    Unfortunately I can't change the missing font of the text because:
    * I can't see the text frame that contains the missing font.
    * InDesign crashes when using the "Find Font" function.
    However, this is not a big problem, I can still work with the file. But I will
    always get the annoying warning about the missing font, and I prefer to
    have no errors in my INDD files.

  • Where do I find Adobe Indesign cs4?

    I am wondering if I need to pay for Adobe Indesign cs4 or is it part of my Acrobat Pro Subscription?
    Thanks

    Hi Christopher,
    Indesign CS4 is not a part of Acrobat Pro subscription. It is a different product altogather.
    You need to buy it separately.
    Let me know if you have any other question.
    Regards,
    ~Pranav

  • Adobe InDesign CS4 + Mathtype, ps2pdf conversion problem

    Dear All,
    We have typset the pages using the Adobe InDesign CS4 + MathType 6.0 using the Macintosh. We are facing the problem PS to PDF converion, the error message is:
    %%[ Error: typecheck; OffendingCommand: makefont ]%%
    Stack:
    [185.0 0.0 0.0 -185.0 0.0 0.0]
    -file-
    -mark-
    %%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
    %%[ Warning: PostScript error. No PDF file produced. ] %%
    The fonts were used on the Math is Euclid Symbol. Whereas, my deliverable product is application file, equations, images and PDF (which converted using their distiller setting). It would be great if any one can suggest how to overcome this problem!
    Thanks
    Gunasekaran

    I don't remember seeing this exact problem, but I've had numerous issues with Indesign CS4 / MathType. (Though it really blew up in CS5, which no longer recognizes the obliqued Symbol font used by MathType, and replaces it with a generic font). Design Science told me that their next update -- which is waiting on the next update to MS Word for Mac, originally due this fall -- would fix the problems, and I wish them much luck.
    First, I'd try Exporting to PDF rather than going through a PS file stage. It's generally more reliable.
    I'd also clean out the font caches from Indesign CS.
    If that doesn't work, examine your computer closely for different versions of the Symbol font. There's probably one in the system library from Apple, one or two in your User library (like the Truetype and Postscript versions that came with MathType), maybe one a gift from Microsoft, and probably one in the Adobe applications folders as well. Unfortunately, they're all slightly different. Conflicts between these may be causing your trouble. Delete or remove all but one, and see if your applications still run -- you probably want to open and save each equation from MathType using the "new" font, then update links in Indesign after each change, so working on a test document with one equation would be best. If one font works, stick with that one.
    I'm sincerely hoping that in the next version of MathType we'll be able to use OpenType fonts for the Greek characters -- Symbol has gotten pretty buggy over the years.

  • You can't open the application "Adobe InDesign CS4" because it is not supported on this architecture"

    A day or two ago I went through installing Adobe InDesign CS4 on Leopard OS X.5.8.  After what appears to be a successful installati
    on, in launching InDesign CS4 the message " You can't open the application "Adobe InDesign CS4" because it is not supported on this
    architecture" comes up".  Calling in to support and speaking with the agent who read through previous posts, suggested to me that I
    should try the same fix that has been suggested when I ran across an error when installing Adobe InDesign CS4 on another separate ha
    rd drive externally connected to this computer running Snow Leopard OS X.6.1 for the error reading: "Damaged &/or incomplete install
    ation" when launching afterwards.  The support technician told me to first delete with the uninstall Adobe InDesign CS4, InDesign.
    Following this I am told to run the CS4 Cleanup Utility.  I restart the computer each and every time after running each of the utili
    ties.  Now I am told to install InDesign as a trial version from the DVD and after installation to go ahead & enter the serial numbe
    r.  When launching InDesign CS4 after installation got back the same error as before: "You can't open the application "Adobe InDesig
    n CS4" because it is not supported on this architecture" comes up".  Followed KB404711 article and no success.  What else can be don
    e to fix this issue?
    This morning contacted Adobe Support regarding this response:
    After having a detailed reserach on your issue i acme to the conclusion
    that the problem you are having is not related to Adobe software but its
    in fact related to your MAC version ( OSX-5.8). While reseraching your
    issue i came across
    to many forums where a lot of postings were about the similar error but
    with different products the only comon thing was all the Errors were
    with Mac machine , also when you check the system requirements  for
    Adobe Indesign Cs4
    by going to the following link
    http://www.adobe.com/products/indesign/systemreqs/?promoid=DRHXE  you
    will find the Mac OS version supported are from Mac OS X
    v10.4.11–10.5.4. but we do support Snow Leoprad , so i would like
    to advise to you to either contact your system manufacturer or upgrade
    to Snow Leopard ( mac os x 10.6)
    I have been told that my case is being sent to Level 2 agents and that it can take 24-48 hours for a response.  In the meantime I decided to see what the Support Forums can do for me.  Until then I am down.  Thanks for the help.

    In the application folder there is a folder 'Adobe InDesign CS4' within which there is just the application file. I would expect there should be more file there??
    I've un-installed and installed again - still the same.
    Even downloaded the dmg again and done thwe whole thing over again.

  • I can't open *.indd files in Adobe InDesign CS4

    I've just installed the trial version of Adobe Indesign CS4 and I cannot open my *.indd files which contain my business brochures etc.
    How can they be opened?
    Operating system:  Windows XP pro SP3.
    Processor: Intel E8400, Gigabyte P35 Chipset with 4Gb RAM.
    Thank you for your help.
    Tim

    Hi, I've tried double clicking as one would normally do and I get the error message:
    Cannot open "filename.indd"
    The files were created in Adobe InDesign by a company that specialises in brochure design and they kindly gave me the files they originally created (to be printed by a professional printer) so that I could make some minor modifications (for the next run from the professional printer), using my trial copy of Adobe InDesign.
    I know that this company uses a Mac operating system but I don't know which version of InDesign they use. I shall ask them if this is relevant (which I guess it will be!).
    Tim

  • Adobe InDesign CS4 Phishing Scam

    This may have been mentioned elsewhere on these forums, but I can't find it. I received an email this morning purporting to be from Adobe with a "user key" attached as a zip file:
    Dear customer,
    Your Adobe CS4 License key is in attached document below.
    We encourage you to explore its new and enhanced capabilities with these helpful tips, tutorials, and eSeminars.
    Thank you for buying Adobe InDesign CS4 software.
    Adobe Systems Incorporated
    [Attachment: License_key_#8567.zip]
    Something else to watch out for. But you'd think at least they'd refer to the current version of the software.
    Steve

    OK. It didn't turn up with a search, but this related thread popped up once I posted:
    http://forums.adobe.com/message/4009250#4009250

  • Adobe InDesign CS4 Stops Working - Windows 7 Ultimate

    I have a new computer with 8g of Ram running Windows 7 Ultimate, with an Intel i7 860 2.8 and everything has been working fine until an hour ago and now everytime I open InDesign and start working on a file, I get the error message that Windows has to close InDesign that it is not working properly.
    I went ahead and made sure I had the latest updates, I removed the Preference file, rebooted and I am still having this same problem.
    I also get a message when I start InDesign and Illustrator that I have to restart FMCore.exe has been stopped. Please start it form the Windows Control Panel for Universal Type Client and then relaunch Adobe InDesign CS4. I click OK and InDesign opens. I cannot find anywhere to start the FMCore.exe. I think it applies to a Mac computer.
    Any help from anyone would be greatly appreciated. I may trying reinstalling InDesign CS4 but I am not sure if I should do so.
    All the best,
    Aleda Downs

    Hi Peter:
    I think the crash may be related to this file. When I opened another file and moved around InDesign acted fine. It appears that is crashes with this one file that I have been working on all day.
    Any suggestions before I do a system restore, as to how to repair a file? The file keeps opening, but when I try to access a menu item or navigate to a different page, that is when I get the error. On the other file, I did everything and not a problem. I think it might be this file.
    Any thoughts?
    All the best,
    Aleda

  • Adobe Indesign CS4

    I am a member of academic staff and purchased (the university purchased it for me - London Metropolitan University, London, England) Adobe Indesign CS4.  The serial number is: [deleted by moderator].  I uploaded this software from a disc onto my laptop.  I have used it successfully.  I now need to transfer this software from my laptop to my main PC (this is NOT any kind of ownership transfer).  Can I just copy it via a portable hard-drive?  Should I upload the disc software again onto the main PC?  Can I do this?
    I have transfered the software onto the hard-drive but it will only open if it is pluggged into the original laptop.
    I look forward to answers please

    NEVER post a serial number.
    If you're going to use it on both machines then just install it from the disk. If you're done with laptop, open InDesign and choose help>deactivate.

  • Will Adobe inDesign CS4 and Photoshop CS4 run on Yosemite?

    Will Adobe inDesign CS4 and Photoshop CS4 run on Yosemite?

    Roaring Apps web site. 
    http://roaringapps.com/apps?index=a
    InDesign has Issues.
    Photoshop appears to be OK but a re-installation may be necessary.  Run the CS Cleaner Tools below and PS uninstaller before attempting to re-install PS CS4.
    http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
    Nancy O.

  • CS4 "You cannot open the application Adobe InDesign CS4 because it is not supported on this archit

    Just installed CS4. Ai and Ps open fine. i get this prompt with InDesign.
    You cannot open the application Adobe InDesign CS4 because it is not supported on this architecture.
    any clues on how resolve this?
    thanks!

    I'm having exactly the same problem with InDesign from CS4 Design Standard (Photoshop and Illustrator both work), and I don't know what to do. I've called up the Adobe support line five times, and received five different answers, none of which have worked (and on three other occasions, my call was dropped, once after an hour on hold).
    One of the Adobe tech support people said to me "None of CS4 works with either 10.5.8 or Snow Leopard. We will issue a patch for that soon" - which directly contradicts what Adobe itself says on this site. I also went to see a Mac Genius, who couldn't help either.
    I have a 2GHz Macbook with 2GB RAM running 10.5.8. I've run the uninstall, and the Adobe Clean Script, I've repaired permissions on my drive (which isn't case sensitive), restarted, reinstalled, tried installing on an external drive and then tried downloading the trial, in case it's the install CD - nothing works. 
    Any suggestions, anyone? Might there be a problem with my library that is stopping the install? Something else?? I bought CS4 for InDesign primarily, this is not good.

  • Adobe InDesign CS4 opening problem

    Hi,
    I have problem of opening Adobe InDesign CS4.
    At the following images you can see the error messages that comes one after the other.
    I really need your help......
    Thank you so much in advance,
    A

    No....
    but thank you ssoooo much for your effort.
    Now it is just crashing without the error massages
    and the error report is
    AppName: indesign.exe           AppVer: 6.0.4.578  ModName: cooltype.dll
    ModVer: 5.6.5.1744 Offset: 0002f52f

  • Installing Adobe InDesign CS4.

    I have previously purchased the Adobe Creative Suite 4. The discs are no longer working, and I need to re-install the programs onto my new computer. I have had this issue in the past and contacted Adobe to email me a link for me to download certain programs from the internet. I have my product code or key code still, but am not able to use the discs to re-install onto my new computer. Can you please send me a link so that I may install Adobe InDesign CS4 onto my new computer.

    Download CS4 products
    Mylenium

Maybe you are looking for

  • Cannot send email via AOL on iPad2 - "A copy has been placed in your Outbox. Sending the message content to the server failed."

    My CEO has an ipad2 and I set it up w/ AOL.  She cannot send any email via her AOL account from her iPad.  She gets a message that says "A copy has been placed in your Outbox. Sending the message content to the server failed."   We've tried it on wif

  • Japanese Characters in Oracle BI Publisher

    We are using Oracle BI Publisher(10.1.3.4). We have a report in Japanese. The output of the report is in HTML and is getting displayed properly. When we send it as a mail using either schedule button or send button, the japanese text is not getting d

  • Adding settlement rules via KAUF_ORDER_CHANGE_OREXT

    Has anybody ever used the function module KAUF_ORDER_CHANGE_OREXT to create settlement rules in an existing internal order? It looks like it supports it because the structure OREXT contains the fields for it.  (for example field KONTY_1)  But when I

  • Looking for a font

    I am trying to find the font Ambigail, its a script like font, Abigail comes up when I've looked but it's not right. Does anyone know where I can download it?

  • SAML generation using weblogic

    Hi, I am using weblogic as an Identity Provider and Oracle Identity federation (OIF) as a service Provider. The federation will be IDP(weblogic) initiated. I have configured both the sides , published and exchanged metadata . Is any out of box featur