Adobe inserts spaces instead of letters during editing

When I try editing a PDF I created in Adobe, it inserts spaces in place of certain letters.  Any guidance to overcome this? 

Essentially it’s this.  I had a misspelled word and needed to replace an uppercase B with an uppercase V. I tried deleting the B first and inserting the V, then tried highlighting the B and overwriting with V, and finally tried inserting the V after the B with the idea of just backspacing over the B afterwards.
Interestingly, the document lets me insert a lowercase v, but not an uppercase V.

Similar Messages

  • Space Bar not responding during editting

    Under normal circumstances when editting in the timeline, my reporters use the spacebar to play and pause/stop the timeline. There has been some issues of late where the space bar seems to not be working, and requires two or three pushes before it plays or pauses the video in the timeline. The video being rendered does not affect it one way or the other, and it is not constant. It can happen at any time, and often doesn't affect a reporter, or will affect a reporter non-stop (both occured today). For the record, yes I have checked the keyboard and it is not the problem. The spacebar works fine for normal use, its just PPro that has the problem.
    Specs: I have four identical edit bays. Each has a Dual Core 2.5 Ghz Pentium  processor, 3.0 gbs of ram, a single sata drive split into two partitions  (system 30 gb and video 470 gb). I am running up to date PPro 5.0.2,  freshly installed on virgin drives. I have two of the bays with the most up to date 64 bit  manufacturer video and audio drivers, and two bays with Windows 7  automatically installed video and audio drivers. The problem is the same  in all four bays.
    Help?

    Your problem is that your systems are below minimum requirements, with some serious setup faults.
    This is harsh:
    1. A single disk is below minimum requirements. You need at least two physical 7200 RPM SATA disks
    2. Never partition a disk. It will only increase wear and tear and slow down performance.
    3. You likely never tuned your system. Look here: Adobe Forums: Guide for installing and tuning a Vista... This also applies to Win7.
    4. Your dual core CPU is absolutely bare minimum for DV material, but anything more will grind to a halt.
    5. 3 GB RAM is not enough.
    You are in for a serious upgrade of your systems.
    First Harm, I do want to say thank you and that I realize you are trying to help. But, budget is a major issue, and the likelyhood of upgrading soon is non-existant. So what can we do to work within the specs I have? I had not done all of the steps in the tune up, but yes most of them I had, specifically I had not installed Ccleaner, and I had not turned off all of the windows add ons as yet - both will be fixed soon. Our editting needs are pretty minimal to be honest, which is part of why its so frustrating that PPro is being so cantankerous. Cut in and out of five or ten clips, add in a voice over track, and once in a great while a cross fade between two clips or fade out audio (using the pen tool), export to mpeg, and we're done. Our longest package is 4 minutes and that's most of a news block (segment between commercials - we have a 30 minutes news show, so you can imagine most are in the 1:30 to 2 minute range).
    function(){return A.apply(null,[this].concat($A(arguments)))}
    Someone is sure to comment on that.  I wanted to jump in first and say that while the idea of using a single partitioned hard drive isn't a good one, doing so is highly unlikely to be the cause of this particular issue.
    Thanks for the reply. Yeah, I knew about someone would say something eventually, but given that it works most of the time, and only freezes up occasionally, like you I find it unlikely that this is the issue. I'm not saying it won't contribute to it (I know it can). The sad part of all this is I can't get it to replicate the space bar freeze up for me, and while I experience it when I go into the bays for the reporters, I have no idea what they have done up until that point in order to troubleshoot what they are doing wrong. I can and have run an install at the same time as editting video and not had a single slow down whatsoever, while several reporters have issues running PPro and notepad. One is running her yahoo mail in IE, and I think that is one of the problems she runs into (given how resource hoggy IE can be - especially on yahoo's webmail interface), but that's one person, not all of them.

  • Adobe Premier cc7.2  hang during editing

    Windows 7 Premier cc 7.2 and BMD Intensity Shuttle  card  4 GB RAM during editing Premier hang  what problem pl. help.

    Hi Bill
    Open the program and click Edit >>Preferences >>Scratch Disks
    This should show the amount of spare memory for performing tasks.
    If low you could add more disk space e.g. an external hard drive rather than main memory.
    In general the software pre-dates Windows 7 but if it will run on Vista it should perform satisfactorily on W7.
    If you need any more advice I would recommend going directly to the video forum.
    http://forums.adobe.com/community/premiere_elements

  • Can I hide the Adobe Reader panel with "Export, Create and Edit PDF and Send and Store Files"? I don't use it and it takes up space

    Can I hide the Adobe Reader panel with "Export, Create and Edit PDF and Send and Store Files"? I don't use it and it takes up space

    If you just mean, can I close it, sure. In Reader XI click the Tools button to close or reopen it.

  • Error message: The preset used by one or more sequences in this project requires third-party components that could not be located. These sequences will be modified to use a custom sequence setting instead. To continue editing using the original preset, qu

    Hello all,
    I can't open a PP project without this error message appearing:
    "The preset used by one or more sequences in this project requires third-party components that could not be located. These sequences will be modified to use a custom sequence setting instead. To continue editing using the original preset, quit the application without saving the project, reinstall any third-party components that are required and reopen the project".
    What I had been doing before this occurred was editing a PP project using ProRes sequences and multi-camera editing. Multi-camera was not working very well and after a few attempts to fix that I gave up and finished the job cutting 3 layers of video instead. AME refused to render the three finished sequences of over 1hr duration so rendered final videos from the PP sequences.
    I tried deleting plists for AME, PP and QT, repairing disc permissions and rebooting but there was no improvement.
    Client is satisfied for now but will want to come back to this job at a later date so decided to uninstall and re-install AME and PP in the hope both would be ready to work properly when needed again. AME works fine in conjunction with a different PP project but now I can't open the PP project in question without the above error message appearing.
    Having searched the net it would seem that the problem may be caused by ProRes but I haven't been able to find a definitive solution for the problem. Does anyone know either:
    1. How to fix this?
    2. If I chose the "modified using a custom sequence setting", can I be sure that my sequences will look the same even if they don't use ProRes? The final deliverable format will be mp4 so as long as the overall look doesn't change then I can  afford a change in the edit codec. It's just that with three sequences over an hour long, I don't want days of work to be ruined.
    Other older PP projects of mine open and work fine.
    Premiere Pro CC 8.2.0
    Media Encoder CC 8.2.0.54
    OSX 10.10.2
    Any help would be greatly appreciated.
    Duncan.

    Adobe web chat come up with a solution.
    Open the PP project.
    Export your sequence or project as a Final Cut Pro XML file.
    Set up a new PP project.
    Import the Final Cut Pro XML file.
    This will get you back up an running.
    Since getting back to editing this project I have found that some things will be lost or change in using XML:
    You will lose position key framing, black video clips, dissolve fx, audio levels, audio dynamic fx, the ability to open a multi camera clip and change the camera view.
    You will keep cut points, crop fx.
    Not perfect but only took a couple of hours to save 3 days work.

  • When trying to open pdf from Inbox, it opens Adobe Reader X instead of my Adobe Acrobat 9 Pro?

    It seems my Windows Vista pc did an update on Adobe.  Now when I open a pdf i receive via email, it automatically opens a
    program called Adobe Reader X instead of my Adobe Acrobat 9 Pro.  How do I force my system to open Pro instead of X?  I want to make edits and stuff to the pdfs, but X doesn't have the capabilities as Pro.  I'm thinking X is a Reader version?
    Using Vista, i cannot find the option in Files to force all PDFs to be opened with Pro.
    Help!

    This is from the Windows Vista help menu:
    If you double-click a file in Windows and it opens in the wrong software program, follow these steps to choose the program you would prefer that file use. You can change this setting for an individual file, or you can tell Windows to open all files of that same type in the software program you choose.
    Open the folder that contains the file you want to change.
    Right-click the file that you want to change, and then, depending on the type of file, either click Open With or point to Open With and then click Choose Default Program.
    Click the program that you want to use to open this file.
    Do one of the following:
    If you want all files of that type to open in the same software program, select the Always use the selected program to open this kind of file check box, and then click OK.
    If you want only that file to open in the software program this one time, clear the Always use the selected program to open this kind of file check box, and then click OK.

  • Adobe camera raw 6.6 freezes when editing

    I have a pc, it freezes when switching from one photo to the next. This is a new occurrance and very annoying since I have to force close and start all over again. I process tons of action shots, and this is making it take forever. I have a newer computer with an excellent processor and lots of RAM. Like I said, it's a new development. Can anyone help?

    In my case, Canon EOS 7D, on Windows 7, 64bit with all the latest updates.  On an HP DV7 laptop with an Intel i5 and 8 gigs of ram.
    Photoshop is CS5 64bit from the Web Premium package.  I always shoot full res raw files in the adobe color space if that matters.
    I also went back and tried with some older files from my EOS 40D and EOS 10D, same thing.
    It always seems to be related to opening more than 10-12 files at a time in Camera Raw.  It will lock up when going from one file to the next by clicking on them in the left hand panel of camera raw window.  This is just doing normal editing operations, you don't have to double click or click real fast or anything special to get it to happen.
    The only way to fix it is to kill the Photoshop process in the windows Task Manager process list.  Then clear the Camera Raw cache before opening again or else camera raw will not read the file it locked up on previously.
    This has been happening very regularly since I updated to camera raw 6.6.
    Thanks,
    Tom

  • Adobe premiere could not find any valid editing modes error

    Hi, I am installing adobe premiere 8 and the update patch and when I click New Project I get the error message Adobe premiere could not find any valid editing modes, please reinstall and start again.  I have reinstalled, installed patch, checked for the vidc.draw in registry and none of these have resolved.
    Have XP service pack 3, with valid HD space etc...  Any suggestions greatly appreciated.

    Hello, Kelzb,
    Premiere Elements has its own forum, which is here:
    http://forums.adobe.com/community/premiere/premiere_elements
    and you'll probably get better, faster replies to video questions there. Good luck!

  • Freezing, Application Ending while using PSE 12 during editing.

    Good afternoon, I'm using PSE 12 and the application keeps on freezing and ending during editing.   Just purchased a new MAC laptop that is running Yosemite 10.10.  Any advice?  Thank you in advance. 

    CSanchez98
    If your program is Photoshop Elements 12, you have posted in the wrong forum. Your thread has somehow been posted in the Adobe Premiere Elements Forum (video editing).
    Please repost your thread in the Adobe Photoshop Elements Forum
    https://forums.adobe.com/community/photoshop_elements
    or wait for a moderator here to see your thread here and move it from here to there.
    Much has been written about Photoshop Elements 12 on Mac Yosemite 10.10 and the good people in the Adobe Photoshop Elements Forum should be
    able to advise you with the best information possible on this matter.
    ATR

  • Inserting Spaces into code when pressing tab

    When I press the tab key, DW inserts a tab character in the
    code. I'd like to replace that behavior with it inserting spaces.
    DW catches when you don't add a trailing slash on certain HTML tags
    in XHTML, so is there a way to hook into that system and have it
    catch when you type a tab in?
    The code formatting preferences only apply to when DW
    auto-inserts tabs, not manually pressing the tab key.

    Go to Edit>Preferences>Code Format and ensure that the
    first setting is as follows:
    index (box checked) with "2" spaces (not tabs)

  • How do I cancel PDF pack?  I wanted Adobe XL Pro instead.

    I purchased PDF pack thinking it would edit and combine PDF's only to realize that was not the case.  Is there any way I can cancel my subscription, or apply it to Adobe XL Pro?
    Thank you

    I'm having a problem similar to this. I purchased the Adobe PDF Pack on 10/5 and I wanted Adobe Pro IX instead (the $14.99 special offer). I was told that if I purchase Pro, the $89.99 would go towards that. I purchased the Adobe Pro on 10/15 and my next payment is due 11/15. If the $89.99 was applied, my next payment should be around in March. Please either give me a refund of the $89.99 or credit my account.

  • How can I stop Dreamweaver from inserting spaces after variables?

    How can I stop Dreamweaver from inserting spaces after
    variables?
    Example:
    "...write to you@<!--#echo var="uu" --> and ..."
    is changed by DreamWeaver to
    "...write to you@
    <!--#echo var="uu" -->
    and...>
    When saving or doing other editing, DreamWeaver adds a space
    and a line break before and after the variable. The line break
    isn't hard and doesn't show, but the spaces added before and after
    the variable DO show in browsers. That looks rather stupid and
    incompetent, and requires hand editing on the server after
    uploading.
    Line wrap and code formatting are turned off.
    Is manual correction after uploading the only solution to
    this problem?
    Thanks
    DearWebby

    DearWebby,
    We already discussed this offline, but I want to post the fix
    here for
    the sake of posterity:
    1. Edit > Tag Libraries…
    2. Open HTML Tags folder
    3. Select "directive" folder icon (not really a folder)
    4. Change Line breaks: setting to "No line breaks"
    5. Click OK
    HTH,
    Randy
    > How can I stop Dreamweaver from inserting spaces after
    variables?
    >
    > Example:
    > "...write to you@<!--#echo var="uu" --> and ..."
    > is changed by DreamWeaver to
    > "...write to you@
    > <!--#echo var="uu" -->
    > and...>
    >
    > When saving or doing other editing, DreamWeaver adds a
    space and a line break
    > before and after the variable. The line break isn't hard
    and doesn't show, but
    > the spaces added before and after the variable DO show
    in browsers. That looks
    > rather stupid and incompetent, and requires hand editing
    on the server after
    > uploading.
    >
    > Line wrap and code formatting are turned off.

  • White space instead of videos

    When I try to watch a video or listen to any music that would require flash, I have a box asking to allow it. When I do, I just get a blank space instead of where the video would usually be.
    I recently did a clean install of Ubuntu 14.04, so I have the latest versions of Firefox and Adobe Flash. I have installed the extras for media on Ubuntu, including ubuntu-restricted-extras, and have followed the instructions here: Flash Player Help. At the bottom of that screen, I don't see clouds, only white space. The same happens here: Adobe - Flash Player : Settings Manager - Global Privacy Settings Panel
    Any help please? I have tried everything on other forums. Thank you!

    Try to repair your Photos Library.
    To repair hold down the  alt/option and the command key simultaneously while double clicking the Photos Library to launch the Photos Library First aid tools. Hold down both keys firmly and long enough, until the First Aid panel will appear.
    The select "Repair".
    But make a current backup of your Photos Library before you try this.

  • I have Adobe Creative Cloud.  How do I edit a PDF form I created at work and e-mailed to my home tablet?

    I have Adobe Creative Cloud.  How do I edit a PDF form I created at work and e-mailed to my home tablet?

    Hi Val,
    I see! Please see this thread: Is FormsCentral part of the Creative Cloud?
    Creative Cloud doesn't include FormsCentral, which is why you're being prompted to upgrade. (An Acrobat Pro subscription, on the other hand, does include FormsCentral.)
    Best,
    Sara

  • I purchased Adobe Acrobat XI Pro - Student and Teacher Edition but cannot activate it even after it has deactivated and replaced my old Acrobat 8. How do I get a serial number and activate the product?

    I purchased Adobe Acrobat XI Pro - Student and Teacher Edition but cannot activate it even after it has deactivated and replaced my old Acrobat 8. How do I get a serial number and activate the product?

    I have the same  problem. Have paid. Messages say I have downloaded it but the file is inaccessible apparently download is somewhere on my hard disk. How do I find it?? Is there not help at an Adobe phone service. If so what is the number to call??
    Roger Broughton

Maybe you are looking for