Adobe Interactive Form Not Editable

Hi,
I have created Adobe Interactive Form using Web Dynpro Java Application.When i run the application i get the pop up message [The document enabled extented features in Adobe Reader.The document has been changed since it was created and use of extended features is no longer available.please contact the author for the original version of this document.].When i click for the pop up message the form is not interactive.If there is Adobe Life Cycle Designer and Adobe Reader version problem for this.Let me know if any one facing the same issue.
Regards,
SatheshKumar R

Hi Satheesh,
1. Check the Adobe form Version (from 7.1 to 8)
2. Installed Adobe form Extended Language Support Font Pack to Adobe ,if you are using some other language in Adobe form
3. Check the ADS Version.

Similar Messages

ADOBE Interactive Form not getting displayed in Browse

Hi,
Currently I am working on EhP4 project on ECC 6.0 environment. For HCM, We have interactive ADOBE forms for MSS. While testing we found that all buttons are displayed in a browser (we are are window 7 IE 8 ) but interactive form is not getting displayed in the browser (Fill out Form as part of MSS). It only displays a line
Checked ADS configuration as per oss note and works ok. Did HTTPWATCH - browser is getting (GET) the Adobe forms with values but not displaying it. If I copy URL from HTTPWATCH GET line in a separate browser window it displays the form.
Thanks in advance your help.
Regards
Jitendra Pongurlekar

Hey Chris (and others),
We were having this same problem, and this Note fixed the issue (thanks!). However, we are still experiencing another issue with HCM Processes and Forms under EhP4. Before this Note, it took about ten minutes before "single line display" would show up. Now after the Note, we get the full form, but it still takes ten solid minutes of waiting before it appears in the window. We're pretty sure it's not a Portal issue, nor an ADS issue, but something with the web dynpros on the ABAP side. However, we have not yet been able to resolve it. Anyone else run into this performance problem with HCMP&F after upgrading to EhP4? We don't have the problem with EhP3.
Best regards,
Matt

Multiple search helps in ABAP Adobe interactive forms not working....

Hello,
I am working on my first interactive form. I have a couple of fields to which I have attached a search help. However, I am able to use the search help for only one field in a session. If I use the search help on one field then I am unable to use it on another field which uses the search help.
Can some one help? I am new to interactive forms and this is my first form.
I appreciate your help in advance.
Thank you,
Leena

Hi Leena,
Are the Data dictionary fields which you are using contains value range. Because i am only getting value help only for the fields for which there is value range defined in the dictionary. The problem is only for the fields for which there is no value range defined. If you have solution to this problem I will definitely award points to you. But in your thread for me its not possible to reward points, so you can answer the following thread:
[How to get Value help in Adobe forms;
Will reward points if found your answer helpful.

Adobe interactive form for flexible compensation plan

Dear Experts
I am new to adobe interactive form. I have to develop a form for Flexible Compensation Plan Structure   in this form when an employee enter his employee id all the data should be displayed in the form and side wise a blank text field
will come for few fields in which user fill the data according to his requirement .Is there any function module is there to retrieve the data. or please suggest the data how to do?
Scenario in Details
   Employee ID                        001
   Employee Name                  XYZ
   Grade Code                          M4
   Department Code              SAP competency Center
   Salary Head                                   ||     Standard Amount                                          || Desired amount
Basic Salary                                   ||        18,342                                                          || 18,342
Children education allowance     ||        2,201                                                           || 2,201   (Blank text field user enter the value)
Transport allowance                    ||         2,000                                                            || 2,000 ( Blank text field field user enter the value)
is there any function module is available or i have to create the function module . Experts please suggest the idea in steps.
Thanks in advance.
Chitta Ranjan Mahato
Moderator message: wrong forum, please have a look in the forum for "Adobe Interactive Forms".
Edited by: Thomas Zloch on May 12, 2011 4:23 PM

Hi,
Pleaes find the sample codes for WD Java...
https://www.sdn.sap.com/irj/sdn/developerareas/webdynpro?rid=/library/uuid/49f2ea90-0201-0010-ce8e-de18b94aee2d
Regards,
<i><b>Raja Sekhar</b></i>

Making field for output in adobe Interactive Form

Hi Gurus,
Actually we have an requirement to input date from user, But user always select the wrong format for date.
Hence it is required to select the date from F4 only.
Let us the optimal solution for this.
Thanks,
Shiva
Moderator message: please have a look in the dedicated forum for "Adobe Interactive Forms".
Edited by: Thomas Zloch on Feb 10, 2011 10:25 AM

Do one thing...
write the following code on "intialize" event of LSF field:
xfa.host.messageBox( $.rawValue );
if ( $.rawValue == 0.0 ) {
$.rawValue = "";
What is the message coming in messageBox in case of value is 0, write that value in if condition.
Edited by: Amit on Jun 6, 2008 7:07 AM

Adobe Interactive forms are not editable following an EHP6 upgrade, how do we correct this?

Good day,
We are currently going through an upgrade to EHP6. We have set up a test parallel environment that was copied from prod and applied EHP6 for a compare.
During our initial tests, we have found that Adobe interactive forms are not loading properly following the upgrade. 11 out of the 13 interactive forms currently implemented in the portal are no longer editable. When you go to select a value from the drop-downs or input a value in the field the fields remain blank. This is a high priority as all users perform their PA actions via MSS and through workflow approvals using Abode interactive forms.
Does anyone have any ideas of how to fix this issue or have come across this issue before?
Thanks in advance,
Christine

Hi Christine,
maybe a restart of the ADS-Server helps you out. I can remember a similar case where the restart helped.
IF not, check if you got the latest patch of the ADS, maybe the upgrade of the erp causes this error, because it pass now more data to the ads than before.
IT's just a suggest. Let us know, if that helped you out.
Regards
Florian

Adobe Interactive Form is not working - Specify Stream Source

Hi Experts:
I am having an issue, where the system I am on is SAP ERP Central Component 5.0 (ECC5.0). There is no Layout Tab to define ZCI or xACF in transaction SFP. I'm not sure if this is relevant, except that, I cannot get my custom Interactive form to work.
All PDF tests in SAP are passing, but being on ECC5.0, I do not have the following programs (among many others):
FP_CHECK_DESTINATION_SERVICE
FP_CHECK_HTTP_DATA_TRANSFER
When I call my Adobe Interactive Form and set sfpdocparams-fillable = 'X' I get an error:
Error creating PDF Document -PDF Exception: Stream does not represent a PDF document.
I have applied the Usage Rights credential properly and my form displays read-only when sfpdocparams-fillable = BLANK. While in transaction SFP, I can see that my interactivity works when displaying the form through the Preview PDF tab.
Also, I know that my credential works because when I test form ISR_FORM_SPEG, I do have interactivity.
In parsing through the ADS log file of my custom AIF, I noticed the following:
    Parse template node
        Template:
            Source = Stream
            Name = TEMPLATE
But I believe it should be something like:
     Parse template node
         Template:
             Source = URL
             Name = dest:FP_ICF_DATA_<My_System_ID>//sap/bc/fp/form/layout/<My_Form_Name>.
Does anyone have any suggestions as to how I can change the source of my stream?
Thanks for your time experts,
Sean

Hi Sean
In the Visual Admin of the server that runs the ADS check under server->services->destinations click on http folder. There should be something under that called FP_ICF_DATA_<sid of backend>. If there is not then create one in there.
Regards
Thashin
Edited by: Thoshin Naicker on Jan 12, 2009 7:09 AM
Edited by: Thoshin Naicker on Jan 12, 2009 7:10 AM

Control not going from Adobe Interactive form to ABAP WD Event handler

Hi
I am facing an issue with adobe interactive forms and WD ABAP integration.
The buttons in adobe interactive form when clicked is going round and round and the control is not going to the ABAP code(WD ABAP event handler code whatsoever). I have also set the debugger but the control is not moving to the ABAP code from the adobe interactive form.
Can anyone help me what can be the issue here and how can I resolve the same?
Thanks.
Sid

Hi Babi,
In the adobe form layout library Use the Submit(which internally means submit to SAP) button from the Webdynpro Native category.
Only this button action can connect adobe to web dynpro.
Whenever we click on this particular button the event will be trigger in the ONsubmit event of interactive form UI element in the webdynpro.There we can write our abap code.Hope this will help you.
Regards,
Simi A M
Edited by: amsimi on Mar 22, 2011 11:37 AM

Adobe interactive form(ABAP WD)size is increasing & not opening from EP UWL

Hello All,
Adobe interactive form (ABAP WD) size is increasing after cleansing data from MDM and the form is not opening from portal UWL.
Same application is working fine in Dev and Qa environment. In dev and QA the form size is around 150 KB after cleansing data from MDM. Some reason in production it is more than 2 MB. FYI - We have multiple app servers in production.
/Padmanaban

Hi Babi,
In the adobe form layout library Use the Submit(which internally means submit to SAP) button from the Webdynpro Native category.
Only this button action can connect adobe to web dynpro.
Whenever we click on this particular button the event will be trigger in the ONsubmit event of interactive form UI element in the webdynpro.There we can write our abap code.Hope this will help you.
Regards,
Simi A M
Edited by: amsimi on Mar 22, 2011 11:37 AM

Web Service is not triggering using Adobe Interactive Form

Hello Experts,
I know this is a common topic now , but the problem I am facing, no thread help me to solve that.
Problem:--
My requirement is to create an adobe form , in which
-> an input field is needed,and some description is needed.
I used button to trigger my webservice.
Here , I want to clear that , I have made a proper WEB SERVICE using Remote Enabled FM.
My web service is working fine as I have tested from WS NAVIGATOR(Note: http://<source>:<port>/wsnavigator).
In Adobe Form (SFP), I have made a new Data connection using WebService WSDL.
All Request and Response parameters are availabe in Data View palletes of Form.
Button that is available from data connection is used.
I have used Button as an Execute button , under execute tab in connection , I had given DATA CONNECTION name .
But above things not worked so ,
I also tried with Regular Button , and under click written Javascript/FormCalc which is:--
var cURL = 'http://x.y.com:8012/sap/bc/srt/rfc/sap/ZMATERIAL_DESCRIPTION?sap-client=800&wsdl=1.1';
var service = SOAP.connect(cURL);
xfa.connectionSet.DataConnection2.execute(0);
But this also not worked .
So, I think there can be a little issue may be , I am forgetting to click some special atrributes in form .
Please help me and let me know what can be probable reasons that webservice is not triggering
Thanks a lot ,
Jeet

Solved my self, converted PDF into image and used that pdf as a static image in Adobe Interactive Form.

ADOBE Interactive Form in webdynpro not allowing to enter value

Hi,
I have developed a Adobe interactive form in SFP and then i developed webdynpro component , then integrated into webdynpro. while running the webdynpro application which is showing the adobeform but the input fields are not allowed to enter value.
The same adobe form can be allowed to enter values while running from the report. i dunno how to set the value of the importing parameter fillable = 'X' in webdynpro.
regards,
Roops

Hi friends,
The above mentioned setting are all active like Zc...Layout, enabled check box etc.. but when i make it to Activex which is not displaying form in the portal while running the application instead it shows red color X mark.. is there any setting required to run adobe with webdynpro ..
1.) any notes or patches ???
2.) is activex mandatory for running interactive form in webdunpro? if yes what are system setting required....
Regards,
Roops.

Print Preview in RFx does not show new Adobe Interactive Form

Hello Experts,
I am trying to assign a standard Adobe Interactive form as the output form for SRM RFQ. I have carried out the following steps in customising under "Define Actions for Document Output".
- Selected bid invitation Action Profile = BBP_PD_BID
- Go to "Processing Types"
- Create a new Processing Type called "External Communication"
- Set the following values to the new processing type:
     - Form Name = BBP_BID_INV_ADB
     - Form Type = P PDF-Based Forms
     - Format = BBP_BID_INV_ADB_MAI
     - Personalization Type = 5 - Recipeient Variable Replacement
- Save Changes
My problem is that when I go to into the BID (RFx) and click "Print Preview" it picks up the standard Smartform, not the new Adobe form I have added as required.
Please can you advise of any additional config settings or other steps required to ensure that the Adobe Form is called when I click "Print Preview"?
We are on SRM 7.0.
I look forward your response.
Regards,
Matt

Hi Matt could you please tell me how do you solve your issue? I have the same and I cant find the solution.
Thanks a lot
Kind Regards

How to display Adobe Interactive Form from ABAP (not WDABAP)

I have created a WD ABAP application that creates an Adobe Interactive Form (ZCI) and submits it for workflow. All of the data on the form is saved in custom itables in the SAP System. The end-users are supposed to save a copy of the form at the last step in the workflow before they "Acknowledge" the task in UWL. Once the acknowledge takes place, they can no longer display the form in UWL. They want an ABAP program that will read the data from the various custom tables and display a "print" version of the form (not interactive).
I am calling FM 'FP_FUNCTION_MODULE_NAME' to get the function module for the form. I then call FM 'FP_JOB_OPEN' with the parameter IE_OUTPUTPARAMS-REQNEW set to ABAP_TRUE. The call to the form FM has the following EXPORTING parameters:
    EXPORTING
    /1BCDWB/DOCPARAMS   =
      /1BCDWB/DOCXML         =
I understand the /1BCDWB/DOCPARAMS but have no idea what needs to be done to for the /1BCDWB/DOCXML parameter. Can anyone offer any advice or assistance?

Joyce,
this is really simple - the reason you have that /1BCDWB/DOCXML is because you defined your form interface to have an XML based interface.
While this is great for ABAP Web Dynpro, because the XML is generated for you, this is NOT the case with regular ABAP.
You should choose ABAP Data Dictionary-Based Interface. You will then be able to add tables, structures and fields to your interface.
For instance, here's code from a program where I call the form in regular ABAP
data: ls_worksheet TYPE Zxxx_structure.
* Fill the ls_worksheet structure here.
* Call the generated function module
CALL FUNCTION ls_function
    EXPORTING
      /1bcdwb/docparams = fp_docparams
      worksheet          = ls_worksheet
    IMPORTING
      /1bcdwb/formoutput = ls_form_output
    EXCEPTIONS
      usage_error        = 1
      system_error       = 2
      internal_error     = 3
      OTHERS             = 4.
Notice I do not have the /1BCDWB/DOCXML Exporting parameter.
Just change your interface to a Data Dictionary Based, and add the tables/structures/fields to it.
then, go to your calling program, fill them, and pass the data through the Exporting parameter.

Visual Admin service not present for Adobe Interactive forms

Hi EP experts,
i want to use Adobe Document for creating Adobe Interactive forms in webdynpro java.
but initially i want to activate Adobe Document Service from Visual Admin..
For this ,Under Cluster tab of visual admin, i want to select Document Services Configuration to assign the credential under com.adobe~TrustManagerService.
But in visual admin of EP 6.0 SP19 there is no Document Services Configuration under services of cluster tab...
To enable this ,is there any need of any patch-up to be installed for Adobe Document Service.?
How should i confirm if alreadt respective Adobe Document Service or patch is Installed on EP server 6.0 SP19.
Waiting for reply..........
Regards:
Hanif

Hi
Yes,We have to install Adobe Document Service patch to get access of its service .
To Check whether it is installed or not go to Netweaver administration -- configuration --services -- adobe doc service - click on this link ,proper message will be display about its availability.
Best Regards
Satish Kumar

Make Adobe form not editable and Password protected

Hi All,
Want to add a button on adobe form , when user clicks the button then the form shouldn't allow to edit fields anymore.
I think this can be coded under script editor.
Please anybody specify the syntax to make adobe form not editable.
And my another issue is whether we can handle adobe forms password protected through SAP. kindly specify any approach.
Thanks in advance.
Regards,
Ashweeni.

Hi Ashweenip,
PASSWORD PROTECTED PDF FORMS:
Go through these Threads
[Password protected PDF file|Re: Password protected PDF file]
[pdf with password encryption|pdf with password encryption;
Regards
Pradeep Goli
Edited by: Pradeep Goli on Feb 4, 2010 11:13 AM

Adobe Interactive Form Not Editable

Similar Messages

Maybe you are looking for