Adobe Interactive Form Tables with Subtotals

It is possible in WAS 640 to do a table with subtotals using Adobe Designer 6.0?
Something as:
Key1 Key2 Key3       Value
Key1 Key2 Key3       Value
           Total Key3 Value
Key1 Key2 Key4       Value
           Total Key4 Value
      Total Key2       Value
Total Key1             Value
Regards.

Even with upgrade I was still having problem, so what I did was...
I created new new interactive form.
I deleted old interactive form from the layout and recreated one.
When I went to adobe design form, I just imported old form (it automatically retained all settings)
and saved it and activiated it... and It worked.
It wasn't the best solution, but since I only had one interactive form, it didn't take that long to do it (probably total of 10 minutes.)

Similar Messages

Is Adobe Interactive Forms compatible with SAP-PM in ECC 6 ??

Hi experts
My question : is Adobe Interactive Forms compatible with SAP-PM in ECC 6 ??
Thanks

Hello,
I can recommend you to search sap official documents for the standard-SAP-delivered-Adobe-forms and maybe there are some for the PM module. Would that help? Or you´ve learnt Adobe yourself? Regards, Otto

Adobe Interactive Forms ZCI with special characters

Hi,
I hope somebody can help me with the problem described below.
We are using Adobe Interactive Forms ZCI (IF). On our IF we placed a Enumerated DDL from the Webdynpro Native tab. In the Visual Admin the number of entries for the DDL is 50 (default). The problem is that when the DDL consists of more than 50 entries a webdynpro pop-up screen is shown. In our DDL we have entries with special characters for example the apostrophe (ie. s). When I select one of these entries its not displayed correctly in the form. It is displayed as 's.
We are using Adobe reader 7.08. I also tested it with reader 8.1.0 and there the problem still occurs.
We are using NW04s SP12.
Thanks in advance,
Kind regards,
Maarten.

Hello Saujanya,
This is not what i meant.
The problem isn't that not all entries are listed in the EVS, but that when the EVS is displayed and i select an entry with a "special" character like i.e.. a apostrophe (') the selected value isn't correctly displayed in the DDL as selected item. Say the i select from the EVS the value " 's " when the EVS is gone the value in the DDL is 's. This is not correct.
Hope this explanation will help.
Kind regards,
Maarten.

SCROLL DOWN IN ADOBE INTERACTIVE FORM TABLE

Hi Experts,
Any possible for to keep scroll down option in adobe interactive form? If possible means please let me know.
Thanks,
Senthil Prabhu

hi,
My requirement, is to use dynamic drop down in dynamic table. I am using webdynpro abap.
i populated the value in drop down.
Its working fine but the problem is how to fill the default value in drop down. because i want to bind the default value which im getting specify value from the table.because each row
im getting different values, like first row
CAR
, that CAR want to fill as a default value in drop down and second row as
BIKE
that BIKE want to fill as default value in drop down ( example drop down contain car , bike , cycle).
In adobe form i binded like this
$record.DATANODE.DATA[*].DNA_RATING
i dont know whether this one is correct or wrong .
im getting default value as empty.
please give me some solution how to do this.its very urgent
thanks
hemachandran.

How to create Adobe Interactive Form in MDM

Iam new to MDM Technology, I want to create Adobe Interactive Form and show a sample demo.
Sample demo which should show adobe interactive form in mdm and how to integrate adobe interactive form in mdm and how to update th data in MDM
I have knowledge of creation of adobe form but how to integrate with mdm technology.

Hi,
There are couple of ways to integrate MDM with SAP Interactive Forms.
1. WebDynpro Java and MDM API (requires Portal)
2. MDM WebService (Portal not required)
Updating data in MDM using WebDynpro Java :
1. In Component Controller -> Fetch data from MDM using API and populate appropriate context structure
2. Map the View Controller and Comp Controller context.
3. Place Interactive Form UI element in view.(Keep the UI element in UpdatePDF mode, this can be done in properties window. Also increase the height and width property value)
4. The Interactive Form UI element is editable in Adobe Form Designer (7.1 / 8.0)
5. Design the form and bind the UI (TextFields/ Dropdowns) with the Context of View Controller.(Done in Binding tab of Object window)
6. Deploy and run the application.
The rendered application will contain an Adobe Interactive Form populated with MDM data.
Regards,
Suresh

How to binnding the data in the adobe interactive forms for making a table?

Hi, experts,
Function:
Through the sharing context node between adobe interactive form and a WDA for ABAP, display the data of the sflight_node in the ADOBE.
version:
Acrobat Reader 8.1.0
currently both of the SAP-ABA and SAP-BASIS SP level: 9
ADS : Successful.
The following is my action:
1.     Create a interface (Z_SFLIGHT_INTF) with a attribute node (SFLIGHT_NODE) that type is "sflight" using the transaction code "sfp"
2.     Create a form (Z_SFLIGHT_FORM) using the transaction code "sfp" with the interface Z_SFLIGHT_INTF.
3.     Trag the sflight_node in the Z_SFLIGHT_INTF to the form( Z_SFLIGHT_FORM).
4.     Open the layout tab in the form(Z_SFLIGHT_FORM), and create a table(table1). Click the table created just now, select the binding tab in the object tab, and in the Default Binding, select the SFLIGHT_NODE under the Z_SFLIGHT_FORM.
Problem 1:
Do you tell me whether is right for binding the context SFLIGHT_NODE using this way? If bind 3 context attributes in the sflight, how can I do it?
5.     Create a WDA for abap (ZZ_02_SFLIGHT), and create a view(MAINVIEW) using transaction code "se80" in the sap-gui with adobe interactive form. Set the templatesource(Z_SFLIGHT_FORM) in the adobe interactive form properties and saved, and then, datasource is "MAINVIEW_Z_SFLIGHT_FORM" automatically.
6.     But I only found the attribute SFLIGHT_NODE under the context node(Z_SFLIGHT_NODE), and I don't found the NODE ( SFLIGHT_NODE ) context in the context tab in the WDA for abap so that I don't set data to the context NODE (SFLIGHT_NODE).
Problem 2:
Do you tell me what can I do it so that I get the node SFLIGHT_NODE rather than attribute in the WDA for setting the data to the CONTEXT NODE (SFLIGHT_NODE)?
Thanks a lot.
Best regards,
Tao

Hi, experts,
You can reply back to me via e-mail if you think we should discuss this internally at [email protected] or [email protected]
Thanks a lot.
Best regards,
tao

Data Passing Problem with Adobe Interactive Forms

Hello all,
I am trying to create a Guided Procedure to implement an offline Adobe Interactive form. This form is based on the standard Requisition Request form used in MSS for e-Recruiting.
I've copied the standard form and updated the layout to ZCI using the appropriate transaction (not manually). After that, I've changed the Interface and layout. But to get the Form in the portal you need to have a .xpd file. Therefore, I've tested the form in preview mode, saved a copy as a PDF file and opened this copy in the standalone Adobe Lifecycler Designer. In the standalone version you are able to save the form as a PDF (not possible using transaction SFP).
My question 1 is if this is a wrong approach and there is a better way to retrieve the xpd file.
Next to that, I wrote a RFC function to retrieve data in the backend. This function is working and now I try to pass the data to the Form in the GP (using prefilling). The data is never passed, any points that I need to check there. The data used to export is a structure that contains a number of table types, because Adobe has issues with importing tables it seems. The form is working correctly in the backend.
Points will be rewarded for helpfull awnsers!
Kind regards & thanks in advance...

Check double post

Table control in adobe interactive form ?

Hi,
Can we make a table control i.e. something like the same functionality that of table control in an adobe interactive form?
Thanks !!

it all depends on what you want to do.
In SFP, there is a table wizard you can use to create your basic table with headers/footers etc...
You can put buttons on your PDF with code behind them to ADD/DELETE rows dynamically.
for example:
data.Page2.parms.instanceManager.addInstance(1);
I have tables where a column would consist of input fields or radiobuttons or just about anything else you can imagine to put in a table.
But as Otto mentioned, you should elaborate more and tell us what you want to do with the table. If you're not afraid to jump into Formcalc/Javascript, you can do some quite complex activities in your form if you want to.

Update table after filling an adobe interactive form inside a workflow

Hi
I have the following workflow problem:
I made a webdynpro application that incudes an adobe interactive form. An user fill this form. After filling the form he will press the submit button. The data will be introduced in the custom table and a workflow will be started.
Inside the workflow, I attached the form filled by the user. After attaching it I introduce a user decision step in order to see the content of the pdf attachment, modify it and send again. So, the person that will execute the workitem has to open that pdf and fill some additional fields. The information should be updated in the table and then send to other persons. I don't know how to update the table with the new values that are inserted in the form in that decisional step and send the updated form to the other users.
Thank you in advance !
Iulia

Hi Iulia
You cannot do that through decision step with attachment. You have to do with task registation in t-code SWFVISU. so the work item will come to UWL once the approver clicks the work item it opens and entered his comments, You have to caputer the comments and pass these comments to the workflow container element from there you update to your custom table.
Regards
vijay

Adobe Interactive forms with Graph and Japanese text

Hi Experts,
I want to use graph/bar/pie chart with Adobe Interactive forms and along with that the UI element's(Button,lable,table header,column) text has to be in Japanese language.
Is it possible using Adobe interactive form ?
Thanks in advance.

I don´t understand. Where do you want the Japanese texts? In the ordinary fields? Then you have to use (of course install first) some Japanese fonts for the fields. If you would like to have the texts in the picture, then there is no problem with the form since the texts are coming as a part of the picture into the form and you don´t need any fonts. Of course you need to install/ configure the japanese fonts in the backend to be able to draw it into the picture.
Otto

Adobe Interactive Forms displaying returned tables

can anyone help me display returned tables in adobe
interactive forms
i have an 2 adobe interactive forms, one for input
the other for output on 2 different views
the input form takes a few parameters, calls the
back end RFC and the
output form displays okay, but i just get the last
row from the table
i've tried binding 1 of the output table parameters to a drop down box and subform,the drop down box displays
one of the return parameters but will not drop down
whenever i include a subform i get a java error on
the output form with no display
i know there are several rows returned from testing the rfc inside abap workbench

Hi Dennis,
To display table in Adobe forms.
Follow these steps :
1. Insert one sub furm.
2. make its type to flow content and flow direction to Table in object property.
3. Insert another subform in above sub form and makes its type to flow content and flow direction to Table row.
4.In binding tab for this subform check the checkbox for "Repeat subform for each Data Item" and in min count you can specify at a time how much rows you want to display.
5. Now place your UI Elements for Data view into this sub form.
6. format these ui elements as you required.
Run application now u can see multiple rows in adobe forms, if you have multiple elements in your table node.
Let me know the status.
Regards,
Bhavik

Problem with ACF for Adobe Interactive Forms

Hi Gurus,
I had created an adobe interactive form using web dynpro for abap, but I am getting the 500 connection timed out error in the browser when I test the web dynpro application. Where as a normal web dynpro application without adobe form is running successfully.
The system details are :-
     Adobe LiveCycle Designer 8.0
     NW04S SPS9
     Adobe Reader 9
     IE 7.
I followed the note 766191 and downloaded and installed ACF(for NW04s and higher version supported upto acrobat reader 9) from browser itself.
I also followed the note 1150277 for enabling IE settings on ActiveX controls. And I checked in IE with Tools->Internet Options->Programs->Manage Add-ons, but the ACF components were not available.
Please help me out.
Thanks in advance,
Sriratna.

Hi Aleksandar
Did you get a solution to this issue
Im having the same problem, If you have a solution please forward
Thanks
Naziem Mahomed

Search Help on Adobe Interactive Form with Web Dynpro ABAP

Hi All,
I have created Adobe Interactive Form with ZCI type and XML based interface type using Webdynpro ABAP.
I placed a text field USER_NAME on the form ( data element is linked to search help USER_COMP ).
Added Native WD UI element 'Value Help' to form to search for users and changed script
*var fieldName = "INSERT_NAME_HERE*"; to var fieldName = "USER_NAME";
The problem is that when I click on the value help button, nothing happens.
Is any more additional steps required ?
Thanks
Karu

Hello
Check this
F4 Value Help on Adobe Interactive Form with Web Dynpro ABAP
Thanks
Anirudh

Drop down in dynamic table in the Adobe Interactive Form (Web dynpro ABAP)

Hi All,
I have scenario use drop down in dynamic table in the adobe interactive form (Using the button the dynamic table row will be increasing and decreasing).
Assume I Add five rows dynamically in the dynamic table. The Last column contains Drop down.
I have button in the adobe form.
Button Name = u201CSAVEu201D
Button type    = SAP Submit button (Native type u2013 I am Using ZCI).
While clicking save button, I need to store the dynamic table datau2019s to back end system. I can able to store the data to back end system. After form data getting saved those particular values need to display in the adobe form.
Here I am facing a problem.
I cannot able to view as a default value in the drop down, which I have selected some values after save operation I am not getting any values in the drop down as a default.
Example:
The dynamic table contains 5 rows (Each and every row Drop down contains one to ten values).
1)     I have selected second value in the Drop down (ROW1)
2)     I have selected fourth value in the Drop down (ROW2)
3)     I have selected fifth value in the Drop down (ROW3)
4)     I have selected seventh value in the Drop down (ROW4)
5)     I have selected third value in the Drop down (ROW5)
I press the save button that particular Drop down value gets saved in back end system and that particular values want display in the Drop down as a default value.
How to resolve this problem.
Regards,
Boopathi M

Hi,
Solve the problem .
I have created the New node for dropdown. also i have one node already for table.
The new node i bind to dropdown, the table same for table.
Its working fine
Boopathi M

Urg : adobe interactive form creation using Web dynpro with ABAP

<i>Hi Floks,
Thank you For Your support and view my Quires.
I need helpful answer Regarding this Question . I need to Create custom ADobe interactive Form with WEB dynpro ABAP .Could please help out and give me what are the step can i followed here (Ex) .
Good rewards for best Answers.
Thank You,
Suresh Duvvuri</i>

please check this link:-
step by step it is explained
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/c766e918-0b01-0010-99b1-c2b78cd059b3
All the best,
Mahesh.gattu

Adobe Interactive Form Tables with Subtotals

Similar Messages

Maybe you are looking for