Adobe interactive forms in Webdynpro

I installed Adobe LiveCycle Designer.
When I edit the interactive form from NWDS, it says "could not find the required product, Install adobe Live cycle designer"
Do we have to perform some additional settings after the installation.

Hi,
ALD 8.1 is still not supported completely.
Install ALD 7.1 for NWDS 7.0.9.
Check the below 2 SAP notes for minimum system requirements and installation procedure
1121176 - Adobe LiveCycle Designer 8.0 - Installation
962763 - Adobe LiveCycle Designer 7.1 Installation
Regards
Srikanth KV

Similar Messages

Unable to test Adobe interactive form from webdynpro

This is the out put i get when i test run the report 'FP_TEST_IA_01'.As suggested in SAP NOTE : 999998
ADS: com.adobe.ProcessingException: Could not retrieve a password for credential: ReaderRights(200.101).
Actually i was trying my first Adobe interactive form with webdynpro and when i tested it i got this message.
The following error text was processed in the system NED : WebDynpro Exception: The ADS call has failed. You can find information about the cause in the error.pdf on the application server
Does Adobe interactive form requires Java stack to be active??
Or is it only a configuration issue in ADS???
What all should i take care in order to successfully run an adobe interactive form???
Regards,
Venkar Raghavan

Dear Abhishake,
Thanks for your reply.
I had gone through the link you had mentioned detailly.what i understand that is ZCI needs to be installed thats comming with Support pack SAP NetWeaver SPS 10 .
Will this also take care of ADS configuration.Where can i find a guide to ADS configuration and ZCI installation.
When i ran a report check FP_CHK_REPORT below is the output i got.can you please throw more light on this.
ISR      Prepare ISR templates for ZCI migration             ISR-001   Prepare ISR templates for ZCI migration
ZCI      SAPForms API to Zero-client template migration ZCI-002   Update enumerated DDL XFO bindItems node reference
ZCI      SAPForms API to Zero-client template migration ZCI-003   Copy enumerated DDL XFO form:ready non-Adobe scripts to the layout::ready ev
ZCI      SAPForms API to Zero-client template migration ZCI-004   Add an XFO name to each of the embedded P1 Enumerated DDL XFO event handlers
ZCI      SAPForms API to Zero-client template migration ZCI-001   SAPForm API to Zero-Client template migrator
Regards,
Venkat

ADOBE Interactive Form in webdynpro not allowing to enter value

Hi,
I have developed a Adobe interactive form in SFP and then i developed webdynpro component , then integrated into webdynpro. while running the webdynpro application which is showing the adobeform but the input fields are not allowed to enter value.
The same adobe form can be allowed to enter values while running from the report. i dunno how to set the value of the importing parameter fillable = 'X' in webdynpro.
regards,
Roops

Hi friends,
The above mentioned setting are all active like Zc...Layout, enabled check box etc.. but when i make it to Activex which is not displaying form in the portal while running the application instead it shows red color X mark.. is there any setting required to run adobe with webdynpro ..
1.) any notes or patches ???
2.) is activex mandatory for running interactive form in webdunpro? if yes what are system setting required....
Regards,
Roops.

Adobe Interactive forms - ABAP Webdynpro or JAVA Webdynpro?

Hi,
I am an ABAPER and I got few requirements for Adobe Interactive forms Offline Scenario/Online scenarios & ALV reports.
I have practiced a session ( How Tou2026execute an RFC model with inputs from Interactive Formswith RFC Module ) -JAVA webdynpro where it interacts with SAP via BAPI.
Now my question is I am bent more towards ABAP.. I want to do this in ABAP but unfortunately I haven't found any similar material for ABAP webdynrpo.Could anyone pls suggest me !
FYI.. We are also developing some ALV Webdynpro reports and I am using PURE ABAP which i like it.
So the other reason is we don't want install NWDI and complicate this structure as we don't have ESS/MSS requirment here. Just we need some forms/reports on portal.
Any suggestions and links which can help me here?
rgds
Vara

Hi Vara,
You can develop Interactive forms using WD ABAP also.
[E Learning- Interactive Forms using WD ABAP|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/media/uuid/c766e918-0b01-0010-99b1-c2b78cd059b3]
WD Java is useful in case, when your ABAP system is less than ECC 6.0. Otherwise you can achieve same functionalities in WD ABAP also.
Hope this will help you.
Amit

Prerequisites to Develop Adobe Interactive form using Webdynpro for Java

Hi All,
What are the prerequisites to develop adobe interactive form. In Service market place where I can get the download link of Adobe Designer and what are the stpes I need to follow in the configuration side. I have gone through the following link but I did not get any information related to configuration side. Can you guys please provide any help links related to adobe forms?.
Regards,
Suresh

Hello,
you right the note is currecntly in update.
the path is:
http://service.sap.com/installations
Entry by Application Group
-> SAP NetWeaver
-> SAP NETWEAVER
-> SAP NETWEAVER 2004S
-> Installation & Upgrade
-> <coohse OS and DB>
-> Adobe LiveCycle Designer 7.1
Best regards,
Dezso

ZCI for Adobe Interactive Forms in WebDynpro Java

Hi experts,
Can i use Zero Client Installation (ZCI) forms in WebDynpro Java.
I am not using ABAP at all & i want to avoid ACF installation on client side.
I am using :
SAP NWDS 2004s SP12
Adobe lifecycle Designer 7.1
Message was edited by:
Virag Shinde

Hello Virag Shinde,
ACF is supported with all the SPs across the Netweaver 7.0 stack and we will continue to support that except the fact that no further development will happen in that area. ZCI is the future of Interactive Forms solution by SAP.
Following two notes would be helpful to get started with ZCI:
1042394: Updating Interactive Form template with ZCI capability
1055911: Creating ZCI based interactive Forms in Web Dynpro for Java
Best Regards,
Krish

Multilanguage Adobe Interactive Forms in Webdynpro

Hi there
I'm using an interactive-form in my new Java Webdynpro.
Now i need to generate it in other languages than english!
Is there any possibility in adobe lifecycle designer to create an "multilinguage" form?
> except traversing all the text-elements over the context or creating a form for each language
Thanks in advance.
Regards Marco
Tags: Internationalization, Many Languages, PDF, Internationalisierung

> Has anybody used "multilanguage" interactive form ever?

Adobe Interactive Forms with Webdynpro

Hi,
I created Adobe form with Webdynpro with some fields for entry and submit button. when i am running on browser, fields are coming as display mode, i can't enter values nor submit button is working.
Any help is appreciated.
Thanks.

Hello,
Do you have your form dynamic? You need to have to be able to push button. And do you have your form interactive? (In WD it is "enabled"). You need to to use it as UI there and back, not only for printing. What type of framework you use? ActiveX or ZCI? If ZCI, insert WD script. Regards, Otto
p.s.: Next time i can recommend you to move your question under Netweaver - Interactive forms

Dropdown List in Adobe Interactive Form Using Webdynpro ABAP

Hi Pals,
In my scenarion I need to list the Rating Code in the Dropdown list box of the Interactive Form.
Form Created by using SFP transaction
Not XML Schema interface
Passing the values to the Form by using the default function module that which created automatically while creating the Form
Am binding the Field and also binding for the list Item. Even though the values are not listing.
$record.sap-vhlist.<Field name>\.DATA\.FIELD.item[*]
I have followed the above format , but no use ...
Field Name : rating_code
$record.sap-vhlist.RATING_CODE\.DATA\.FIELD.item[*]
Field Name : value
$record.sap-vhlist.VALUE\.DATA\.FIELD.item[*]
but it is not working for me, will appreciate if some one really help me to fix this.!!!!
Thanks & Regards
Andy.

For the form buttons to work on-line in your WebDynpro app, you need to change the PDF form to be Dynamic:
 if(firstTime){
 // We need to set the PDF to be Dynamic, for the form JavaScript code to work
 IWDPDFDocumentInteractiveFormContext pdfContext =
 WDPDFDocumentFactory
 .getDocumentHandler(wdThis.wdGetAPI(), "InteractiveForm")
 .getDocumentContext();
 pdfContext.setDynamic(true);
In this code segment, "InteractiveForm" is the UI id.
I was able to get that far, but I although I add subforms dynamically via javascript, the mapped WebDynpro context node doesn't pick up any new elements.
ie: if I start with two WD context elements (0..n) cardinality, then add a third via the form JavaScipt button, I see changes only in the two context elements when I submit. A third context element isn't created or populated.

Submit Button Adobe Interactive forms in webdynpro application

Hi All,
I have a webdynpro requirement which contains only ineractive Fom ( Adobe From).
In adobe Form i have inserted webdynpro activeex Submit Button.
When i run my webdynpro application.I am not able click on the submit button and it is not triggering the backend logic.
Can anybody please let me know how can i solve this issue.
Thanks,
Taragini

Hi Tarangini,
As how suggested by Thomas ensure that the button type which you are using within your Adobe form matches the "displayType" property that you have specified for the InteractiveForm UI element within your Web Dynpro component. Also specify an event name to be triggered when the user clicks on the Adobe form button. This can be done by specifying a value for onSubmit property of the InteractiveForm. Also ensure that your Adobe form is enabled by having the "enabled" checkbox property of the InteractiveForm checked.
Regards,
Uday

Adobe interactive forms in webdynpro abap

hi
what is the purpose of templatesource(form and interface)?why we need to create a form and assign it to interface .purpose of interface .what the action it is going to perform in adobe forms

Hi ,
The interface helps to take the data to-and-from the Adobe form.
Thanks and Regards,
Prabhakar.

Change Language Dynamically in Adobe Interactive Form with Webdynpro

Hi Experts,
I want to display some text in Arabic in my Adobe Form. Where do I store the translations for the english text and how do I substitute it to display the translations. I also noticed one issue. When I hardcode some arabic text in the text field. It appears as a junk character when my form is displayed in the application. We are using ECC 6.0 and non unicode. Is it possible to display arabic in such an environment.
Regards,
Abdullah

Solved using JDBC

ABAP Webdynpro ADOBE interactive form

Hi All,
I have a problem when reading attachments from online adobe interactive form in Webdynpro ABAP.
I have tried two options:
Option1:
Get FP reference.
l_fp = cl_fp=>get_reference( ).
try.
Create PDF Object.
l_pdfobj = l_fp->create_pdf_object( connection = 'ADS' ).
Set document.
l_pdfobj->set_document( pdfdata = lv_pdf ).
Set task to get attachments.
l_pdfobj->set_task_getattachments( ).
Execute, call ADS.
l_pdfobj->execute( ).
Get result.
l_attachments = l_pdfobj->get_attachments( ).
CATCH cx_fp_runtime_system INTO exc.
xslt_message = exc->get_text( ).
ENDTRY.
option 2: in wdomodify method
DATA l_ifba TYPE REF TO cl_wd_interactive_form.
l_ifba ?= view->get_element( 'IF_001' ).
DATA l_form_method_handler TYPE REF TO IF_WD_IACTIVE_FORM_METHOD_HNDL.
l_form_method_handler ?= l_ifba->_method_handler.
DATA l_attachments TYPE tfpattachments.
l_attachments = l_form_method_handler->get_attachments( ).
Both options are not getting the attachments.
Our SAP Netweaver version is 7 and ehp 4, ADS configured.
If i save the pdf with attachments locally and then use the UI upload and read the attachments it works. But not when the interactive form is online and when i add attachments to it and click submit(where submit code is the option 1 code), it is not finding any attachments. I wonder whether pdfsource context stores the attachments or not.
When i check the note, SAP say that attachments are supported from ehp2.
What is that i am missing? Any direction would be good.
In worst case i will do webdynpro screens for attachments maintenance, wanted to check with all experts before taking this option.
Please someone answer.
Thanks
Anu

>When i check the note, SAP say that attachments are supported from ehp2.
That is correct. Attachments are supported as of NetWeaver 7.0 Enhancement Package 2.
>Our SAP Netweaver version is 7 and ehp 4, ADS configured.
Not possible. NetWeaver 7.0 Enhancement Package 4 doesn't even exist yet. In fact 7.0 Enhancement Package 2 won't start ramp-up until December 20th. I think you are confusing your ERP Enhancement Package level with your NetWeaver Enhancement Package level. I'm guessing that it is much more likely that you are on ERP 6.0 Enhancement Package 4. This level of ERP actually runs on NetWeaver 7.0 Enhancement Package 1.

Read values from Adobe Interactive Form inside the webdynpro

Hello,
I have problems to read the values of the fields inside de adobe. I read an article on saptechincal that told:
You can see the Adobe form that we have designed, enter the data as shown below and press the submit button. (As I said earlier an activex control will be installed on to the client machine, you can see the activex control in the internet explore go to the menu: ToolsàInternet optionsàgo to the programs tab àPress button Manage add-ons.
You can see an activex control named u2018SAP ACFu2019, if you donu2019t have this control you will not see this page: Note you need to have adobe acrobat reader 7.1 installed, I have used version 9, the activex control was not working properly so down graded my adobe reader to 7.1)
This is true ??? I have the Acrobat reader 9.3 and i saw that also have the SAP ACF installed.
The value of the property displaytype on adobe interactive form on webdynpro is activeX or native.
Thank you in advance.

Hi,

Thank you for the answer.

I change the value of the attribute but again i can read anything from the adobe form. So let me explain what i'm doing.

Objective: I have to create one webdynpro with an adobe interactive form for create new clients on r/3 system.

1. I create de the view with 2 elements an interactive form and one submit button.

2. Create the context of the view with the following tree:

> context (node)

 > ADOBE_DATA (node)

 > Clients (from KNA1 table) (node)

 > KUNNR

 > LAND1

 > NAME1

 > ORTO1

 > TELF1

>PDF_SOURCE

3. Complementing the properties of the interactive form:
datasource = clients node of the context
displaytype = native
pdf_source = pdf_source attribute of the context
templatesource = name of the form

4. Create the form, and add the data source to the interface of the form

5. On the form bulider i add and subform on the hierarchy tab and the all the fields of the interface to the form and
automatically the value of the fields are binding.

6.Add a submit button from web dynpro native and add the event click to the button. Then i change the value of the layout type and save e activate the form and the interface

7. The next step is create an action for the button submit for the event "onSubmit". So i create the function and start coding this code:

DATA: adobe_node TYPE REF TO if_wd_context_node,

 client_node TYPE REF TO if_wd_context_node,

 client_element TYPE REF TO if_wd_context_element,

 client TYPE if_create_client=>element_clients.

*Get reference to the adobe_data node from the context

adobe_node = wd_context->get_child_node( name = wd_this->wdctx_adobe_data ).

*Get reference to the clients node from the context

client_node = adobe_node->get_child_node( name = wd_this->wdctx_clients ).

*Get element node

client_element = client_node->get_element( ).

*Get the values from the form

client_element->get_static_attributes(

 IMPORTING

 static_attributes = client ).

8. Then for finalize i add the view to the window and crate a web dynpro application and put one break point on the submit function event.

9. Activate and test the application and when the program try to add a reference to the element node always returning a null reference and the application dumped.

So please help with this situation i can't understand what is the mistake.

PS: Now i have installed the acrobat reader 7.0.8

Edited by: miglsilva on Sep 4, 2010 5:50 PM
Edited by: miglsilva on Sep 4, 2010 6:01 PM

Error while running adobe interactive form

Hi,
I made a scenario to update a z table using adobe interactive form in webdynpro.While executing I am getting the error as :
Termination type was : RABAX_STATE
Can anyone please guide me as to what can be the reason behind this error.
Thanks in advance !!

Hi
I suggest that you first review your configuration using this tutorial which short and to the point:
[ADS configuration|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f03414f8-d4ce-2a10-d4b6-ab201b329d98]
After that perform the tests that were suggested in the posts above (link to the relevant tests [ADS tests|http://help.sap.com/saphelp_nwmobile71/helpdata/en/43/f31e3082221595e10000000a1553f7/content.htm]
Regards
Adi J.

Adobe interactive forms in Webdynpro

Similar Messages

Maybe you are looking for