Adobe is slow when using the reader

adobe is slow when using the reader; It is very slow when I give to another person

I am working in Windows 7.
I have a pdf with 1900 pages of maps. I am using adobe acrobat 10 standard and sampling adobe acrobat xI pro. When I click on links moving from each map takes about 8 secs. when I save the file and give to someone that is just using adobe reader the process takes 20 to 30 seconds to move.

Similar Messages

My MacBook Pro is running very slow when using the internet and sometimes gives the pinwheel of death, any suggestions on how to fix?

My MacBook Pro is running very slow when using the internet and sometimes gives the pinwheel of death, any suggestions on how to fix?

<http://www.thexlab.com/faqs/sbbod.html>

Why is my 8gb ram macbook is slow when using the internet compared to my old laptop?

i just purchased my macbook last week and i've noticed that using the internet has been quite bad at home. It seems to run pretty fast when using my schools wifi however it just doesn't make sense that my old laptop would still run faster than my new 8gb ram macbook. My internet plan is with telstra -50gb ADSL modem and it promises speeds up to 20 mbps and i'm only getting 4.11 mbps...

Hold down the option key and select the Wi-Fi menu in the menu bar. What values are shown for the following?
PHY Mode
Channel
Security
RSSI
Transmit Rate

My macbook works normally connected to the charger, but it is very slow when using the battery. What can I do?

I have a Macbook Pro 13'' 2011 OS X 10.9.4, and recently it started giving this problem, which the macbook works well while connected to the charger, but when i use it only with the batery it gets really slow. But in the report system of the macbook says that the battery is operating normally. It has alreary 822 cycles.

Perform a SMC reset:
http://support.apple.com/kb/HT3964
If there is no meaningful change, open System Information>Power and post the following from your MBP:
(Make certain that the charger is connected)
Ciao.

Adobe X error when using the email button

I recieve an error stating "An error occured while sending mail"
I have set Outlook to be the deault, uninstalled Adobe X, repaired Office, etc. Nothing seems to help.
It was working untl my last update.
Any help would be great.
Windows XP SP3
Office 2003
Adobe Reader X
Thanks
Danny

Hi Danny,
Without knowing all the variables (recent updates, security settings, etc.) it is difficult to tell what the problem is. The best way to find out if the problem is localized to your machine is to possibly troubleshoot on another machine.
If it is localized to your machine then there have been enough changes made that it has affected how you email pdf's, and if you have already done a clean install of Adobe Reader X that would take you to the next step, to look at Outlook (besides running the repair tool). Again troubleshooting on another machine might be helpful.
The reason I impress troubleshooting is that I maintain over 70 (destop/laptop) machines that have the current version of Reader X and they run various versions of Outlook from 2003 to 2010; the only time I have run into the issue you speak of is with Outlook 2010 64 bit, which there is no current fix. I had to roll those machines back to 32bit in order for them to be able to email PDFs.
Best Regards
Jeff

WOW is very slow when using the linksys router

If I connect directly into my cable modem I and run and play WOW with no problem, if I connect back the wireless router the proformance is very slow and can't see the characters sometimes. Is there a setting to turn off or lower the filters?
I have the 54GS

You may need to forward ports in order to make it work properly. This http://portforward.com/cportsnotes/battlenet/wow.htm would be a help.

IPad 4 keyboard slow when using the Photos app.

I bring a picture up via the Photos app to send via an email and the keyboard is extremely slow, like I have to wait about 10 seconds for it to catch up to what I have typed. Was running iOS 8.x.x and was hoping that upgrading may fix the issue - it didn't. Now running latest iOS 8.1.3.
Please help as this is extremely annoying.

Are you asking about the "Photos.app" or "iPhoto.app"?
In both apps the heart shaped icon is tagging a photo as "Favorite", and the the photo will appear in your "Favorite" album.

Acrobat XI pro - Slow when using 'save as' or saving merged pdf

System:
Windows 7 pro 64-bit
AMD FX 6300 processor
HD 7770 1 GB video card
1 TB disk space
16 GB RAM
MS Office 2013 Plus
Adobe Acrobat XI Pro
Issue:
Saving pdf is very slow. Regardless if the location is a network location or desktop. Using the 'save as' option is also very slow. It's super slow when using the 'merge' option.
Troubleshooting:
- uninstalled adobe, rebooted system, reinstalled adobe, installed updates - no changes
- tried using optimize pdf option when saving- no changes
- ran adobe in compatiblity mode - no changes

All available updates have been applied/installed.

When using the camera downloader in Adobe Bridge CS6 with Nikon D5200 we are unable to see previews of the photos and it is very slow to download. The issue occurs under a the users rights, but not under admin level. This is a new issue

When using the camera downloader in Adobe Bridge CS6 with Nikon D5200 we are unable to see previews of the photos and it is very slow to download. The issue occurs under a the users rights, but not under admin level. This is a new issue.

Hi Jdentremont,
Lync client gets user photos by first querying the Address Book Web Query (ABWQ) service on the server, which is exposed through the Distribution List Expansion web service. The client receives
the image file and then copies it to the user's cache to avoid downloading the image each time it needs to be displayed. The attribute values returned from the query are also stored in the cached Address Book Service entry for the user. The Address Book Service
deletes all cached images every 24 hours, which means that it can take up to 24 hours for new user images to be updated in the cache on the server.
To troubleshoot your problem, please follow the steps below:
1. Navigate to
“X:\share\1-WebServices-1\ABfiles\000000000\000000000” folder. (ABS file share)
You should see some photo files in this folder as the following screenshot.
2. Delete all the files in this folder.
3. On test PC, delete local cache files.
%userprofile%\AppData\Local\Microsoft\Office\15.0\Lync\[email protected]
4. Sign-in Lync with the test account.
5. Go back to the ABS file share, check if there is any Photo file in the folder.
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How do I turn off the alt scroll zoom? When I'm in Adobe photoshop and illustrator using the pen tool, alt is utilized for another short cut. I would like to use the alt command for the pen tool instead of zooming into the screen.

How do I turn off the alt scroll zoom?
When I'm in Adobe photoshop and illustrator using the pen tool, alt is utilized for another short cut. I would like to use the alt command for the pen tool instead of zooming into the screen.

I tend to select things from left to right and every time I am moving in a downward right diagonal motion during lasso selection I am missing a clear view and I am tending to have a more sloppy selection. All this does is slow me down since I need to go back and hit those areas again. The big arrowhead just get's in the way. The original lasso tool with the thin line and small active point at it's lower left was far better for me.
I don't like turning the cursors to precise because I like to see the active tool icon where my cursor is and as the icon changes as I hold modifier keys down. If I am forced to get comfortable with using pricise cursors I guess I will, but man, I've never had to do this in my 15 years of photoshop use...
I would absolutely LOVE to find a way to get the old lasso icon -- without the arrowhead above it.
Is there any chance this option could be inlcuded in cursor preferences? I'd give much thanks, Adobe.

PDF's in Acrobat Reader X will not open when using the browser, Internet explorer opertes all ok? Mozella 4 is the default browser! Windows XP Home ed with all latest updates!

When using the Mozella Firefox 4 browser and the NEW version Adobe Reader X, PDF's online will not ever open. After 1-3 minuites, I eventually get a message the Adobe reader is running, but need to close and try again! I get same results when trying again.
Internet Explorer operates and opens the online PDF's all ok and the Adobe Reader X seems to operate all else ok!
I think, but not sure, that this issue appeared when the Adobe Reader updated from the older version 9 or so to the NEW Adobe Reader X version about 1 or 2 weeks ago, but not sure. I just remember that Mozella always worked ok previously to the Adobe Reader X version for opening online PDF's last month, etc.
Note that I said that Internet Explorer browser operates ok Using the New automatically upgraded Adobe Reader X for viewing PDF"S! (adobe notified me that the new version 10 (X) was available for updating, etc) I also just discovered that google chrome browser opens the online PDF's ok!
I have not trying re-storing the computer to the previous month, etc, since the issue seems to be with Mozella not liking the Adobe Reader X version and Internet Explored browser operating ok!
Any ideas????

I had the same problem and my solution was to disable the PDF extension that came with Firefox 4 which belongs to another company. I found out that it wast interfering with ReaderX. I unabled it and restarted Firefox. I have had no problems since then. Go to Tools, Add-On and click on Extensions and disable the PDF extension. I hope this helps

Why does Adobe 9 standard crash when using the digital signature

When using the digital signature in Adobe 9 standard it crashes, it has been repaired, uninstalled and reinstalled and still crashes when putting in the digital signature and not understanding why. Also the digital signature was redone. Your thoughts on this would be most helpful.

I had the same problems and was VERY frustrated.
I finally solved my problem by uninstalling reader 9.1, air, acrobat.com and THEN after a restart, installing a lite version of reader 9.1 from this site:
Good Luck!
rufus78

When using the iphone 6 Plus. I use iMessage it is terribly slow to attach photo or take a photo the app does not show camera and slow... like 2 mins at least.

When using the iphone 6 Plus. I use iMessage and then attach a photo or take a photo... the app does not show the camera fully or even to attach a photo does not work. I have about 8-9000 phones and like 10 short videos in there but it is incredibly slow and almost unable. I have the 128GB iPhone 6 Plus with 46 gb still available. I think this should not be so slow with so much memory still available. Please help. I am using 8.1.2. Yes I have set up the phone as a new phone. Apple store even reformatted this iphone 6 plus 2 months ago but it is still terribly slow Thanks

Hey Bender1031,
Thanks for the question, I can definitely understand how frustrating this issue may be with a brand new phone. Great troubleshooting so far by already attempting a restart and reset. If the issue persists, let’s try restoring your device and updating to the latest software (iOS 8.0.2):
Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/HT1766
iOS: How to back up your data and set up your device as a new device
http://support.apple.com/kb/HT4137
After erasing and setting up as a new device, your device is now in a factory configuration. Test to determine if erasing and setting up as a new device resolved the issue. Content on the device may have caused unexpected behavior.
- If the issue is still present, you may want to contact Apple Support.
- If the issue is now resolved, sync one type of content at a time back to the device. For example, if you had an issue playing music, add songs from iTunes and confirm they will play. If your contacts weren't loading successfully, add the contacts back. After each sync, test to see if the issue has returned.
Thanks,
Matt M.

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems n

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

Adobe Photoshop CS4/5 Crashes when using the Move Tool

Hello. I'm here because I'm having an issue with Photoshop.
I was trying out CS5 when it started to crash every time I tried to use the Move Tool. It was the generic error message: "Adobe Photoshop CS4 has stopped working.
A problem has caused Adobe Photoshop CS4 to stop working correctly. Windows will close the program and notify you if a solution is available."
Thinking that it was a CS5 issue, I went back to my copy of CS4, only to find the same thing happening there (I also downgraded because CS5 was also crashing at other random times for some reason, but that's an issue for another time).
This puzzles me because both were working fine before. Granted, I hadn't opened them for a while, but it was a sudden thing.
My first impulse was to uninstall and reinstall CS4. No luck. So then, I uninstalled all third-party plugins, thinking that might be it. Still, the same problem. I started looking around on Google for solutions and found the instructions on resetting the Tool preferences (I chose to reset the preferences for ALL of the tools). When that didn't work, I tried deleting the preferences file outright, which said instructions recommended. Nothing.
I should note that Photoshop crashes when using the Move Tool to move an object without ant lines around it, i.e., a layer. I'll move the object, and after two to three seconds, the mentioned error message will appear and Windows will close Photoshop. This, however, only seems to happen after selecting, copying, and pasting part of a large object with some variation of the Marqee Tool (thus making that part a new layer by default) while working at a zoom of 100%. So, in short, working with a large image like <a href=http://www.wallpaper4me.com/images/wallpapers/ergo_proxy_267_1280-862301.jpeg>This</a> at 100% zoom. The image linked is the image that I was using and am currently using to reproduce the problem. It is 1280x1024 pixels. I have tested this with somewhat smaller, yet comparable images too. Same problem. I have never had this problem working with large images before, and I wonder if anyone has any suggestions short of formatting my hard drive.
The error code, from Event Viewer:
Faulting application name: Photoshop.exe, version: 11.0.2.0, time stamp: 0x4bf2d4f6
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x65637275
Faulting process id: 0xe28
Faulting application start time: 0x01cb2bb3471d87bf
Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe
Faulting module path: unknown
Report Id: b412e368-97ab-11df-8f49-001d60b646ef
Details:
System
Provider
[ Name]
Application Error
EventID
1000
[ Qualifiers]
0
Level
2
Task
100
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2010-07-25T05:15:57.000000000Z
EventRecordID
78845
Channel
Application
Computer
Gatherum
Security
EventData
Photoshop.exe
11.0.2.0
4bf2d4f6
unknown
0.0.0.0
00000000
c0000005
65637275
e28
01cb2bb3471d87bf
C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe
unknown
b412e368-97ab-11df-8f49-001d60b646ef
Details in XML View:
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2010-07-25T05:15:57.000000000Z" />
<EventRecordID>78845</EventRecordID>
<Channel>Application</Channel>
<Computer>Gatherum</Computer>
<Security />
</System>
- <EventData>
<Data>Photoshop.exe</Data>
<Data>11.0.2.0</Data>
<Data>4bf2d4f6</Data>
<Data>unknown</Data>
<Data>0.0.0.0</Data>
<Data>00000000</Data>
<Data>c0000005</Data>
<Data>65637275</Data>
<Data>e28</Data>
<Data>01cb2bb3471d87bf</Data>
<Data>C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe</Data>
<Data>unknown</Data>
<Data>b412e368-97ab-11df-8f49-001d60b646ef</Data>
</EventData>
</Event>
System Specifications:
Operating System: Windows 7 Ultimate 32-bit (6.1, Build 7600)
System Manufacturer: HP-Pavilion
System Model: GN697AA-ABA a6214x
Processor: Intel Pentium Dual CPU E2160 @ 1.80 GHz (2 CPUs)
Memory: 2048MB RAM
DirectX Version: DirectX 11
Display Device:
Name: NVIDIA GeForce 8600 GTS
Manufacturer: NVIDIA
DAC Type: Integrated RAMDAC
Approx. Total Memory: 1010 MB
Current Display Mode: 1440 x 900 (32 bit) (60 Hz)
Photoshop Version: CS4 Extended 11.0.2

Even a decent RAM upgrade is usually only a few hundred dollars nowadays, but it's not a trivially simple process. That said, with a little research and care you can do it. Alternatively, you can hire people (e.g., "Geek Squad") to do such an upgrade.
First, you'll need to know what your operating system capacity is. For example, a 32 bit Windows system can really only use up to a bit more than 3 GB of RAM, while a 64 bit Windows system can use all the RAM you can find a place to plug in. What version of Windows are you running?
Then you'll need to determine what RAM you have installed and what your computer's maximum RAM capacity is - usually you can do this through internet research, either by visiting your computer manufacturer's web site or doing google searches. There are even RAM manufacturer web sites that will tell you what kind of RAM your computer needs and suggest sources, for example:
http://www.kingston.com/
It may be that you can just plug additional chips into currently empty sockets, or it is possible you'll need to replace the RAM chips you have installed in your computer to make room for an upgrade. Every computer is different.
If you list your computer model and current RAM that you have installed here, it may be that someone can help with more specific advice.
-Noel

Adobe is slow when using the reader

Similar Messages

Maybe you are looking for