Adobe LifeCycle Designer ES4 install error

During install I am receiving an Error 1311.Source file not found:
I just downloaded and and now am running the install. Why would this error occur

It seems that I solved the problem by myself by deleting the 11.0 subdirectory in <AppData>\Roaming\Adobe\Designer.
Afterwards, the application started normally and the settings were created from scratch.
Best regards
Oliver

Similar Messages

Adobe LifeCycle Designer ES4 crashes after SP1 installation

Good Morning to everyone. I have a problem with my Adobe LiveCycle Designer ES4 since yesterday and I hope that someone can solve it.
Yesterday, I downloaded and installed (German) SP1 for Adobe LiveCycle Designer ES4. Download and installation were successful,
but the application crashes during start which did not occur before installation of SP1. I uninstalled the application and installed SP1
again, same problem. Now, it will not start even without installation of SP1.
System protocol (applications) states error 1000:
Name der fehlerhaften Anwendung: FormDesigner.exe, Version: 1101.3238.2.0, Zeitstempel: 0x521b3448
Name des fehlerhaften Moduls: mfc90u.dll, Version: 9.0.30729.6161, Zeitstempel: 0x4dad06e1
Ausnahmecode: 0xc0000005
Fehleroffset: 0x00060ebd
ID des fehlerhaften Prozesses: 0x2668
Startzeit der fehlerhaften Anwendung: 0x01cecfc625a75da7
Pfad der fehlerhaften Anwendung: D:\Program Files (x86)\Adobe\Adobe LiveCycle Designer ES4\FormDesigner.exe
Pfad des fehlerhaften Moduls: C:\Windows\WinSxS\x86_microsoft.vc90.mfc_1fc8b3b9a1e18e3b_9.0.30729.6161_none_4bf7e3e2bf9 ada4c\mfc90u.dll
Berichtskennung: 6471a15f-3bb9-11e3-9c3f-c8185a2c8366
It seems that the problem results from an access to the mfc90u.dll. But I am unsure why as the application starts fine on another user account...
Is there anything I can do?
Best regards
Oliver

It seems that I solved the problem by myself by deleting the 11.0 subdirectory in <AppData>\Roaming\Adobe\Designer.
Afterwards, the application started normally and the settings were created from scratch.
Best regards
Oliver

Error during installing Adobe LifeCycle Designer

Hi all,
I am trying to install Adobe LifeCycle Designer 8.1 , already downloaded all files from service marketplace.
But while running set up,getting below error message:
The SAP Front-End Installer executable is unable to process the XML files.Restart the uninstallation with the
NwSapSetup executable installed on the workstation.
Do anyone knows about this error message.
Thanks in advance.
Kiran

It seems that I solved the problem by myself by deleting the 11.0 subdirectory in <AppData>\Roaming\Adobe\Designer.
Afterwards, the application started normally and the settings were created from scratch.
Best regards
Oliver

BPM 7.3 - Adobe Lifecycle Designer 9.0

Hi guys,
I`m a PI developer and quite new to SAP BPM, only took part in the SAP training several months ago.
Now my colleague installed a BPM 7.3 system and I`m trying to implement some processes starting with
the sample of the training.
At the moment I try to connect Adobe Lifecycle Designer with the NWDS to use Adobe Forms.
Following note 1522483 I choose Adobe Lifecycle Designer 9.0 and installed it.
During the installation my old version 8.2 was recognized and as described in the note it should be updated.
At the end of the installation there was an error report indicating that there was some trouble during update
of the installation
Error description: Not Available
ErrorCode: -2147467259
State: Install on Update
Type: File
Dest: C:\Programme\Adobe\Designer 9.0\FormDesigner.exe
Source: C:\Dokumente und Einstellungen\jogugel\Desktop\TEMP\BPM\Adobelifecycledesigner9\Adobe\Designer 9.0\FormDesigner.exe
when I edit the created xdp file in NWDS I could for example create a new data connection specifying the created xsd file, but I am not able to save any changes.
In the Error log following errors are visible:
openDocumentWithBaseUrl() NOT successfully called (maybe too old version of WDAdobeControl.dll?).
File: <C:\Knowledge_local\BPM_BRM\NWDS 7.3 workspace.jdi\LocalDevelopment\PO_DEMO_SC\exsignodeloitte.ch\po_product_demo\pr\pm\_comp\src\PurchaseRequestForm.xdp>
Path: <C:\Knowledge_local\BPM_BRM\NWDS 7.3 workspace.jdi\LocalDevelopment\PO_DEMO_SC\exsignodeloitte.ch\po_product_demo\pr\pm\_comp\src\> ...
Trying to call openDocument() instead ... [Error: com.sap.fp.is.ide.adobetemplatedesigner.AdobeDesignerEditorPart Thread[main,6,main]]
and a second error:
NativeWrapper.openDocumentWithBaseUrl() returns false because rgdispid is null
[Error: com.sap.fp.is.ide.adobetemplatedesigner.NativeWrapper Thread[main,6,main]]
I already searched for this error in SDN and the web, but without result.
The NWDS version I am using is 7.3 SP02 PAT0001
Does anybody has an idea what the reason for this error could be and how to solve it,
maybe I am using two incompatible versions? Is there a way to check or guide describing this?
Any help appreciated.
Thanks in advance
Kind regards,
Jochen
Beforehand I already tried Designer 8.2

Hi John,
thanks for your answer.
I deinstalled and installed the Lifecycle Designer from sratch again.
Unfortunately the same error arises.
openDocumentWithBaseUrl() NOT successfully called (maybe too old version of WDAdobeControl.dll?).
Any suggestions?
Kind regards,
Jochen

Problem with Adobe LifeCycle Designer and NWDS

Hi,
I have a Problem using the LifeCycle Designer in NWDS. The LifeCycle Designer is installed but every time I am trying to start it from the NWDS there is an error - Could not find the required product. Install SAP Interactive Forms - Adobe LiveCycle Designer...... .
Does anybody have an idea?
Thanks!
best regards

Hi,
I had the same issue.
the versions were these:-
ALCD->8.1
NWDS->7.0.114
whenever I was trying to edit the interactive form the same error was thrown.
So I removed the Adobe LiveCycle Designer 8.1 from my machine.
Installed Adobe LiveCycle Designer 7.1 in place.
Now it is working fine.
Don't know the exact reasons why it was not working, but still keeping a copy of the 7.1 in your machine will help.
Regards,
AJ

Adobe CS3 - Server 2008 Install Error

I am in the process of transitioning our organization to a cloud server running Windows Server 2008 x64. I would like to be able to install Creative Suite 3 Design Premium on the new server. I have attempted the install but get the following error at the beginning before the installation will ever really get started "Critical errors were found in setup. Please see the setup log for details". Therefore, I am not able to even start the install.
I have tried for several hours to research on the web but have not found any definite answer. It does appear that CS3 is not supported by Adobe on Server 2008. Has any one had any luck getting it to install properly on Server 2008? If not CS3, will any of the newer version work on Server 2008 should I choose to upgrade to a newer Adobe product?
Thank you in advance for any assistance that might be provided. I greatly appreciate it.
Todd

Thank you very much for your assistance. I really appreciate it.
Todd
Mylenium <[email protected]> wrote:
Mylenium http://forums.adobe.com/people/Mylenium created the discussion
"Re: Adobe CS3 - Server 2008 Install Error"
To view the discussion, visit: http://forums.adobe.com/message/4115952#4115952

Eine speicherbare PDF mit Adobe LifeCycle Designer ES 2 oder 8.0 erstellen

Hallo AdobeForumMembers,
ich habe in Adobe LifeCycle Designer 8.0 (FirmenVollversion) ein Formular mit Checkboxen und aussfüllbaren Zeilen erstellt und möchte dies nun in einer PDF speichern, die nach dem Ausfüllen auch vom Endbenutzer abgespeichert werden kann. Wenn ich die PDF mit dem aktuellen Adobe Reader öffne, kann die PDF nicht gespeichert werden. Wie oder wo kann ich diese Einstellung denn ändern? Habe schon die Hilfe und das Forum durchgesucht, aber leider nichts gefunden. Habe mir auch die Testversion von ES 2 installiert, aber auch dort finde ich keine Option dafür.
Danke im voraus und mit freundlichen Grüßen
cuc_member

Hallo!
Ich habe schon bemerkt, dass der LCD bei Acrobat XI nicht mehr kostenlos mitgeliefert wird (sondern ein anderes, mehr dialogorientiertes Tool). Der Grund dafür wurde mir beim Kauf von LCD ES4 aber damit angegeben, dass der LCD für den normalen Endanwender zu komplex sei. Er wird wohl vor allem bei SAP-Umgebungen benutzt. Für mich taugt er aber, weil ich mit JavaScript viel Funktionalität einbauen kann.
Wie sich aus LiveCycle Help | Adobe LiveCycle ES4 Supported Platforms ergibt, wird mit LCD ES 4 & SP 1 auch Windows 8 unterstützt. Insofern ist deine Aussage für mich "überraschend".

Integrating adobe lifecycle designer 8.0 with SAPGUI

hello,
I have installed adobe lifecycle desginer 8.0 (which comes with adobe acrobat 8.0 . Now how can i integrate this within the SAPGUI and work on interactive forms. Anybody ?
Thanks,
Shehryar Dahar

hi,
Adobe Lifecycle designer for interactive forms comes as a bundle with the Netweaver installation.
its integrated with Netweaver itself.
my netweaver version # is 2.0.16
then you put a UI element called "interactive form" on your dynpro layout.
when you goto...
Interactive form -> Edit...
it takes you to the Adobe Lifecycle designer... where you can design your interactive form.
i hope this helps,
regards,
-Ag.

Integrate Adobe LIfeCycle Designer 8.0 into NetWeaver Development Studio 7

Hi everyone,
I need to integrate Adobe LIfeCycle Designer 8.0 into NetWeaver Development Studio, the issue is that I have installed Adobe LifeCycle but I wanted to know how in integrated into Netweaver Development Studio 7.0
Thanks very much in advance,
Armando

Hello Armando,
If u have installed NWDS, during the NWDS there is a checkbox to include Adobe LiveCycle Designer.However , NWDS 7 setup includes designer 6.0.
Case 1 : If u have not checked the above checkbox during NWDS installation.You can directly install any Designer version.
Case 2 : If u have checked the checkbox during NWDS installation , when u install designer 7 or 8 it will give a message saying A version of designer already exists,In the above scenario, you will have to either uninstall desginer 6(if possible) or reinstall NWDS without checking the Desinger Checkbox.After that you can install any designer version u want.
Hope it helps,
Regards,
Virag

Adding Barcode to Adobe Form using Adobe LifeCycle Designer

I am hoping someone can help me. I have created a PDF form and have added 2 3-of-9 barcodes to the form using Adobe LifeCycle Designer version 8.0. I see the barcodes when I prin tthe form from Adobe but when I run my web page to print out the form using pdf, only the default value shows on the printed form, no tthe barcode as expected? Do I need some other software?
Thanks in advance
D

Hi Vasu,
Yes you can add fonts on ADS.
Adobe document services require access to fonts that are installed with the Font Manager Module. This module contains a number of Adobe bundled fonts installed in
"/usr/sap/<SAPSID>/JC<xx>/j2ee/os_libs/adssap/FontManagerService/fonts/adobe".
You can also add fonts obtained from other vendors. The types of fonts you can add are OpenType® (.otf), TrueType® (.ttf), and PostScript® Type 1 (.pfb/.pfm).
Procedure
To add fonts:
1. Create a subdirectory called fonts below the
"/usr/sap/<SAPSID>/SYS/global/AdobeDocumentServices/ FontManagerService" directory.
Enter JC<xx> if your system is a SAP Web AS J2EE system.
Enter DVEBMGS<xx> if your system is a SAP Web AS ABAP + J2EE system (J2EE Add-In).
2. Create a subdirectory called customer below the fonts/ directory created in the previous step.
3. Copy your fonts into the "/usrsap/<SAPSID>/SYS/global/AdobeDocumentServices/ FontManagerService/fonts/customer" directory.
4. Restart the Document Services Font Manager for the changes to take effect.
5. Also restart the application com.adobe/AdobeDocumentServices for the changes to take effect.

Adobe LifeCycle Designer funktioniert nicht mehr

Ich habe LCS ES4 SP 1 (German) seit mehreren Monaten auf meinem Laptop (Dell E6500) mit Win 8.1 als Standalone-Version (also nur Designer für Formularerzeugung) genutzt. Seit einigen Tagen kommt beim Start gleich die Meldung "Adobe LifeCycle Designer funktioniert nicht mehr". Unter Details dieser Meldung sind folgende Informationen:
Problemsignatur:
Problemereignisname:    APPCRASH
Anwendungsname:    FormDesigner.exe
Anwendungsversion:    1101.3238.2.0
Anwendungszeitstempel:    521b3448
Fehlermodulname:    mfc90u.dll
Fehlermodulversion:    9.0.30729.6161
Fehlermodulzeitstempel:    4dad06e1
Ausnahmecode:    c0000005
Ausnahmeoffset:    00060ebd
Betriebsystemversion:    6.3.9600.2.0.0.256.48
Gebietsschema-ID:    1031
Zusatzinformation 1:    5861
Zusatzinformation 2:    5861822e1919d7c014bbb064c64908b2
Zusatzinformation 3:    4754
Zusatzinformation 4:    47547fafc9a3073a5bbe8e69322a8db5
Ich habe im Zusammenhang mit Problen mit WLAN auf dem Laptop von Dell eine Treiberaktualisierung durchgeführt. Es gab da aber keine Fehler und sonst funktioniert auf dem PC auch alles wie vorher (WLAN geht nun auch, lag aber am Hardwareschalter).
Ich habe LCS auf einem anderen Laptop mit Win 8.1 installiert: funktioniert (gleiche Installationsdateien wie oben) ohne Probleme. Ich habe LCS auf dem betroffenen Dell-Laptop mehrfach deinstaliert/neu installiert (PC rauf/runter). Immer das gleiche.
Der letzte Schritt, der mir noch einfällt, wäre Win 8.1 neu installieren. Aber den Aufwand scheue ich (noch). Wer kann mir einen Tip geben?

Hallo!
Ich habe schon bemerkt, dass der LCD bei Acrobat XI nicht mehr kostenlos mitgeliefert wird (sondern ein anderes, mehr dialogorientiertes Tool). Der Grund dafür wurde mir beim Kauf von LCD ES4 aber damit angegeben, dass der LCD für den normalen Endanwender zu komplex sei. Er wird wohl vor allem bei SAP-Umgebungen benutzt. Für mich taugt er aber, weil ich mit JavaScript viel Funktionalität einbauen kann.
Wie sich aus LiveCycle Help | Adobe LiveCycle ES4 Supported Platforms ergibt, wird mit LCD ES 4 & SP 1 auch Windows 8 unterstützt. Insofern ist deine Aussage für mich "überraschend".

Acrobat cannot start Adobe LifeCycle Designer! Help!

Can someone help please?
I downloaded a trial version of acrobat 9 pro LCD last week, it opened then, but not anymore. This is the message i get everytime i try to open it, "Acrobat cannot start Adobe LifeCycle Designer. You may need to repair or reinstall the application using the original installation program."
MS SQL server 2009 was installed on my desktop this week, and from another discussion i read that this server and LCD dont get along with each other, and since LCD worked last week for me I am assuming installation of SQL server could be a possible reason why LCD wouldnt open now.
My task is to create a dynamic form that should generate a report from just typing in one field, (for example, entering the name of an account holder should populate the remaining fields of the account holder's data as result.)
has anyone done this so they can help troubleshoot??

I wrote too soon.
So the form seems to be done and functional. I just had to click cancel before going to Livecycle. Then I save it and work on it in Acrobat. I don't know why Livecycle isn't installed correctly, or honestly, what Livecycle does that Acrobat doesn't.
Anyway, problem resolved.

Issues with Adobe LifeCycle Designer

Hi,
I m using Adobe LifeCycle Designer 7.0 with SAP NetWeaver 7.0.11 on windows XP.I m facing these 2 problems :
1. In my form i have few subforms.For those i have set Auto fit property as true,Expand to fit property is true ,Allow multiple lines property is true ,Allow Page breaks within content property is true & the layout is flow content.
If the complete data for 1 subform is shown in same page,it shows the complete data but if the data is split into more than 1 pages,its showing the data in both pages but it truncates some data.
e.g. Suppose 1 have a subform & in that 20 rows are available.If that subform split in 2 pages,it shows 10 rows in 1st page but in 2nd page it shows only 6-7 rows & truncates 2-3 rows from the last.I m not sure what can be the problem.
2. I m not able to put some extra space between 2 subforms while using Flow Content Layout.
regards
Sumit

To create a form in the AcroForm format or LiveCycle Designer you will need Acrobat Professional as Standard does not have the form tools. Although LiveCycle Designer will export in the XML format. It is also possible to export form data from Acrobat in the XML format by using the XFDF format.

Issues with Adobe LifeCycle Designer & SAP Netweaver

Hi,
I m using Adobe Lifecycle Designer 7.0 with SAP NetWeaver 7.0.11 on Windows XP.I m facing these 2 problems in that.
1. I have few subforms in my form & for those i have set Auto fit property as true,Expand to fit property is true ,Allow multiple lines property is true ,Allow Page breaks within content property is true & the layout is flow content.
If the complete data for 1 subform is shown in same page,it shows the complete data but if the data is split into more than 1 pages,its showing the data in both pages but it truncates 2-3 lines at the end.I m not sure what can be the problem?
2. While using Flow content ,i m not able to put some blank spaces between 2 subforms.
regards
Sumit

Hi Sumit,
You have probably worked this out by now but just in case anyone else has this problem (I remember how frustrating it was):
Just to point out this has nothing to do with NetWeaver (apart from the LiveCycle version it is using) only with LiveCycle.
Page flow will only occur within the parent subform so if you have an subform that is flowed it can only flow within the parent and if the parent is static (or positioned) then the child subform will appear to be cut off as it flows within its parent.
To be able to flow over pages you need to have all the parent objects right up the chain to the sub form that represents your page to be flowed as well.
The next challenge is to be able to position things the way you want them and flow your content. This is where you need to get a creative mix of positioned and flowed elements within your layout to achieve your goals.
Relating to the second question you can use the margin attributes to create space between two flowed objects.
Hope this helps (someone...)
Ben.
Ben Patterson
http://www.acclimation.com.au

Adobe LiveCycle Designer ES4 for MAC

Hi, our company recently purchased Adobe LiveCycle Designer ES4 (Windows,Multiple Languages) but we actually need the MAC version. Is there a way we can change our membership to MAC

Please check if this works
http://helpx.adobe.com/livecycle/help/livecycle-es4-supported-platforms.html#LiveCycle system requirements
You can also contact Support for assistance.
Regards
Rajshree

Adobe LifeCycle Designer ES4 install error

Similar Messages

Maybe you are looking for