Adobe lightroom 4 installation and upgrade version

I had a trial version or adobe light room installed as 4.3, had trouble utilising website for purchase so bought a disk which installed as version 4.1, now there are both on the systm, how do I upgrade the serial coded to 4.3 version and delete the 4.1 version?

Which operating system are you using is the first question.  The serial number information may be removed when you remove Photoshop Lightroom 4.1.  You should be able to re-enter the serial number though when you open Photoshop Lightroom 4.3.

Similar Messages

  • Is adobe reader, acrobat requires system reboot for installation and  upgradation

    is adobe reader, acrobat requires system reboot for installation and  upgradation?

    Hi Rave,
    Thanks for your reply.
    we have a vulnerabilities scan on adobe systems. it shows as below .
    Plugin Name
    Remarks
    Family
    current version
    Adobe Reader Unsupported Version Detection
    Upgrade to latest version(http://www.adobe.com/support/programs/policies/supported.html)
    Windows
    Adobe Reader 9.5.5 9.5.5
    please tell me how to fix it.
    thanks in advance .
    Regards,
    Harish

  • I have purchased Adobe Lightroom 5 and put in the redemption code and downloaded the programme but the serial is not accepted. I previously had trail version

    I have purchased Adobe Lightroom 5 and put in the redemption code and downloaded the programme but the serial is not accepted. I previously had trail version

    Jennymatthews please see Redemption Code Help for information on how to redeem your redemption code.

  • I downloaded Adobe lightroom 4 and I cannot find the serial number. Does anybody know where I can find this serial number?

    I downloaded Adobe lightroom 4 and cannot find the serial number. Does anyone know where I can find the serial number?

    Perhaps you should ACTUALLY READ THE LINK VARJAK POSTED!!!
    gregbartgis wrote:
       I also downloaded LR4. It was a paid app - $79.99. I wasn't assigned a serial number
    Correct.
    Mac app store software does not contain serial numbers since they are linked to your AppleID.
    which means I can't upgrade to LR5 through Adobe.
    Yes, you can.
    Purchase the upgrade.
    When when you run the LR5 installer it will see you have the Mac app store version and it will get a serial number from Adobe to use for LR5.
    Very helpful - if there were a serial number!!!!
    There will be a serial number WHEN YOU RUN THE INSTALLER!
    It will get one from Adobe.
    You're welcome!

  • Adobe Lightroom, Photoshop and Bridge does not recognize the raw files from my Canon Mark III 5D Camera.

    Adobe Lightroom, Photoshop and Bridge does not recognize the raw files from my new Canon Mark III 5D Camera.  How can I get my files open to view and edit?  I am using LR3, Photoshop CS3 and Bridge CS3.  Do I need to upgrade these programs or is there another way to get these programs to recognize my files?
    When I try opening the raw images in Lightroom, the thumbnails say "Preview unavailable for this file"  ... when I click "import" an error message pops up that says "The files are from a camera which is not recognized by the raw format support in Lightroom."
    When I try opening the raw images in Photoshop, an error message pops up saying "could not complete your request because photoshop does not recognize this type of file."
    When I try opening the raw images in Bridge, it just shows an icon with the file name and CR2.
    Please help!!!

    Unless I missed an announcement, today, LR6 isn't available, yet, right?  Only Adobe employees and beta testers would know what LR6 does differently at this point and they're all sworn to secrecy.
    LR5 is available as a standalone version.
    PS-CS6 is available as a serial-number-licensed version.
    PS-CC + LR5 are also available as a Photography Plan subscription for $10/month with a minimum OS versions of OSX 10.7 (and probably 10.8, soon) and Windows 7.
    Bridge is part of PS, not a separate program.
    LR5 standalone and LR+PS-CC plan are both available on this page:  http://www.adobe.com/products/catalog/software.html
    PS-CS6 can be found on this page:  Creative Suite 6 which can be found by searching www.adobe.com for Photoshop CS6 and clicking the Buy link in the on-the-fly search results.
    As with any new Adobe software, it might be wise to run it in trial mode for a few days/weeks to see if it works well with your computer, before purchasing and finding out you might need a new computer, first.

  • BO XI 3.1 installation and Upgrade activity Steps

    Hi Experts,
    Right now we are using BO XI R2 Version, Planning to uninstall XI R2 and do a fresh installation of BO XI 3.1 with SP3.
    Do I need to install the Java latest version for XI 3.1? Right now we have the following setting,
             j2re1.4.2_04
             j2re1.4.2_16
             jre1.5.0_14
    Since the up gradation of Reports, user, groups, universe events etc are from XI R2 version to XI 3.1.So Is it enough to    
    install BO XI 3.1 with SP 3, or do I have to go for FixPack inorder to avoid problem after this upgrade activity.
    Could you please tell me about the BOXI R2 to XI 3.1 installation and Upgrade activity Steps.
    Regards,
    Sridharan

    Hi,
    you dont need a special JRE version on the Server. With the installation of BO a own JRE will be installed for BOE. Only for developing WebI reports the developer need a 1.6.x JRE later on.
    There is already FixPack 3.1 out but installing "only" SP3 should be sufficient.
    I would recommend you check the upgrade guide from Rel.2 to XI 3.1:
    https://websmp208.sap-ag.de/~sapidb/011000358700001646952008E/xi3-1_bip_upgrade_en.pdf
    You need a S-User to Login.
    Regards
    -Seb.

  • OEM 10.2.0.1 installation and upgrade to 10.2.0.3

    Dear all,
    I want to install the latest version of OEM 10.2.0.3 on Linux RedHat 4. However, after downloading the OEM 10.2.0.3 and reading the release note, I realized that the download is just the 10.2.0.3 upgrade patchset. I have to do a fresh base installation of OEM 10.2.0.1 first. Is this correct?
    After installing OEM 10.2.0.1 with an existing 10.2.0.1 database, I need to upgrade OEM 10.2.0.1 to OEM 10.2.0.3 using the patchset I downloaded. Because both OMS and AGENT will be upgraded, I am not sure what installation destination I shoud supply? OMS_HOME, or AGENT_HOME, or just a new home for upgrade? What are the required steps to upgrade OEM 10.2.0.1 to OEM 10.2.0.3?
    Are there any documentation or articles that I can follow to do the upgrade?
    Thanks a lot in advanced.
    Xiaoping

    There is a README.txt file in the 10.2.0.3 patchset zip file that has the instructions for upgrading 10.2.0.1 OEM to 10.2.0.3.
    You download 10.2.0.1 separately which delivers a 10.1.0.4 database. Apply the one-off database patch to the db10g 10.1.0.4 Oracle Home via opatch, then use runInstaller to upgrade to 10.2.0.3 via 3731593. You can optionally create a db10gr2 10.2.0.1 Oracle Home, apply the 10.2.0.3 patchset then run dbua to upgrade the 10.1.0.4 repository database to 10.2.0.3.
    You probably would have had fast response posting to the Enterprise Manager Grid Control forum:
    Enterprise Manager
    2. Fresh Installation of Enterprise Manger 10g Grid Control Release 2 and upgrading it to Release 3
    In order to install Enterprise Manager 10g Grid Control Release 3, you must install either 10.2.0.1.0 or 10.2.0.2.0 Grid Control environment. This section describes steps to install Enterprise Manager 10g Grid Control Release 3 environment starting with 10.2.0.1.0 (10.2.0.2.0 for Windows) install
    2.1 Install Oracle Enterprise Manager 10g Release 2
    Installing 10g Grid Control Release 3 requires any previous releases of Grid Control, that is any 10.2.x.x.x installation, and upgrade to 10.2.0.3.0 release. If you do not have a previous release, but want to have a 10.2.0.3.0 Grid Control environment, then first install 10.2.0.1.0 Grid Control (10.2.0.2.0 for Windows), and then upgrade it to 10.2.0.3.0. Start with the Oracle Enterprise Manager 10g Release 2 Grid Control media pack (DVD) and install 10.2.0.1.0 (10.2.0.2.0 for Windows)
    - Insert DVD into your computer (note: It is better to copy the DVD contents to local hard disk for faster performance)
    - Run runInstaller (setup.exe for Windows) to start installation
    - When asked for "install type" option, choose "Enterprise Manager using New Database" option
    - Complete installation as per install guide
    Important: For information about installing 10.2.0.1.0 and 10.2.0.2.0, refer to the installation guides available at:
    http://www.oracle.com/technology/documentation/oem.html
    2.2 Apply required patches
    In the case of Grid Control environment installed via "Enterprise Manager using New Database" option, repository database version is 10.1.0.4.0. Before upgrading to 10.2.0.3, apply the patch for bug 4329444 on the Database Home. In order to apply this patch for the Solaris platform:
    - Copy the p4329444_10104_<platform>.zip file from the DVD to any directory on the host which has the repository database running on.
    - Unzip the file using following command:
    $ unzip p4329444_10104_<platform>.zip
    - Follow the instruction in 4329444/README.txt to apply the patch
    For more detail on this, refer to the release note.
    2.3 Install Oracle Enterprise Manager 10g Release 3
    2.3.1 Copy the p3731593_102030_<platform name>.zip patch set installation archive from the DVD to any directory on the host which has the Oracle Management Service running on it.
    2.3.2 Perform the installation
    - Enter the following command to unzip and extract the installation files from the downloaded image described in section 1.2:
    $ unzip p3731593_102030_<platform name>.zip
    This extracts the files to the "3731593" directory.
    - Navigate to the 3731593/Disk1 subdirectory
         $ cd 3731593/Disk1
    - Set the ORACLE_HOME variable to the Oracle Management Service(OMS) oracle home.
    - Execute the runInstaller (setup.exe for Windows)
         $ ./runInstaller
    The upgrades process then upgrades the Oracle Management Service (OMS), Oracle Management Repository and the Management Agent on the same host as the OMS to the latest Enterprise Manager 10g release 3 version.
    Important: The same Patch Set can be used for patching OMS,Repository, and Management Agent. For more detail on installing the patchset, refer to the release note.
    2.4 Optional: Upgrading Repository Database to 10.2.0.3
    If you installed Grid Control 10.2.0.1.0 (10.2.0.2.0 for Windows) via "Enterprise Manager using New Database" option, your repository database version is 10.1.0.4. In order to upgrade your repository database to 10.2.0.3, follow the steps below after upgrading your Grid Control environment to Enterprise Manager 10g release 3.
    a. Upgrade the database to 10.2.0.1
    b. Install 10.2.0.3 database patchset

  • I cannot use this version of the application Adobe Air Installer with this version of Mac OS X.

    I have Mac OS 10.5.8 and every time I try to install Air Adobe 3 I get the message
    "You cannot use this version of the application Adobe Air Installer with this version of Mac OS X." 
    Could anyone help me? 
    Jai

    Hi,
    Adobe won't be developing for 10.5.8 new features (including new runtime) only security relates updates for existing runtimes (Flash 10.3.*/Air 2.7.*). Flash 11/Air 3.0 are only supported on 10.6.8.*/10.7.*, see:
    http://kb2.adobe.com/cps/916/cpsid_91694.html#main_system_requirements
    There is recent,  lengthy thread on forums with Adobe's employees statements on that subject (support/development for 10.5.* and newer) but I cannot find it quickly as basically forum search is broken/hard to do,
    regards,
    Peter

  • I just purchased Adobe Lightroom 5 and can't activate it after installing it on my computer because the product box doesn't contain a 24 digit S/N serial number but an 8 digit PN number. Does anyone have a solution?

    I just purchased Adobe Lightroom 5 and can't activate it after installing it on my computer because the product box doesn't contain a 24 digit S/N serial number but an 8 digit PNB number. I contacted the vendor and they told me to seek help via the Adobe help lines. Does anyone have a solution?

    Unfortunately, the "find your serial number quickly" link does not work because I don't have any number on my Lightroom cdrom box with 24 digits... All I have is an 8 digit PN number... :-/

  • Adobe Lightroom for Mac OS version 10.6.8?

    Is there an Adobe Lightroom for Mac OS version 10.6.8?  I have a trial one but can't download it onto my computer

    Hi jdnels37,
    Here are the tech specs required for different versions of Lightroom.
    http://helpx.adobe.com/lightroom/kb/system-requirements-lightroom.html
    You can try with Lightroom 5, though it is not tested & approved with 10.6.8, if that doesnt work, go for lightroom 4.
    Link for downloading the trial:
    http://prodesigntools.com/adobe-cc-direct-download-links.html
    Thanks

  • How Do I Update Adobe Lightroom After installing Trial Version?

    I am currently running Adobe Lightroom 3 on Win7 64-bit.  I would like to run the trial version of LR5, but I am concerned with whether I will be able to implement an upgrade and not a full version installation.  Additionally, if this is possible will my catalogs come over automatically or do I have to move them manually?

    Hi DarylGS
    Please refer : https://blogs.adobe.com/richardcurtis/?p=1192
    and
    http://prodesigntools.com/lightroom-5-ddl-comparison-vs-lr4.html

  • Lightroom Migration and Upgrade

    I have Lightroom 3 on my existing Windows XP PC, and I now have a new Windows 8 PC that I want to migrate to.  As part of the switch I want to upgrade to LR4, so I am planning to buy an upgrade version of LR4.
    Do I have to install LR3 on the new PC before I can install the upgrade licence, or is just having the existing serial number sufficient?
    If I have to install LR3 first, what is the process for migrating it from one PC to another?
    Thanks
    Mike

    Moving this discussion to the Photoshop Lightroom forum.

  • I bought Adobe Lightroom 5 and received a link to download it but the page I get says "The resource you are looking for cannot be found" What can I do?

    I'm logged in my account but no matter what I try, I get the same message when I click the download link on the offered page, can someone tell me what to do? Thanks

    Downloads available:
    Suites and Programs:  CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  12 | 11, 10 | 9,8,7
    Lightroom:  5 | 4 | 3
    Captivate:  7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Adobe AIR installation and testing

    Hi,
    Can anyone say why Adobe AIR does not function correctly in
    my PC
    (Vista Home Premium). When I try to run a test application
    after installation
    through AIR SDK command-line tool (adl AIRHelloWorld.xml),
    console window opens but shuts down immediately and the test
    html-file
    is not shown at all. Has anyone any idea about the cause of
    this problem?
    Regards,
    Matti

    "How are you going about running adl? .."
    I, indeed, first open a command window (Start/Run..) and then
    write the following command text: "adl AIRHelloWorld.xml" and
    then I execute. But the opening window does not remain open,
    but gets closed right away after popping up, so I do not have
    change
    to see any error messages.
    And I did everything what was instructed in the manual
    (Adobe® AIR™
    for JavaScript DevelopersPocket Guide) concerning the
    "Installing of Adobe AIR
    and concerning the "Setting Up the Adobe AIR SDK and Command-
    Line Tools"
    So, what am I not seeing correctly?
    Regards,
    Matti

  • How do you remove a fake adobe flashplayer installer and redirect?

    I was searching for something and downloaded a fake adobe flashplayer.  Ever since then when I open a new window it brings me to the Ask home page.  How do I remove the fake installer and the redirect to the ASK home page.  When we open a new window I would like it to open to our home page. 

    Hi,
    Please post cs6 issue at http://forums.adobe.com/community/creative_cloud?view=discussions
    Thanks,
    Sham

Maybe you are looking for

  • HT5787 How do i retrieve my password if my email account is no longer active and i don't know my security questions?

    Trying to retrieve my password, however i forgot the answers to my security questions or entered them wrong when i entered the answer initially. And the email i was using at the time no longer exists.

  • Switching between office network & home adsl modem

    Small problem. Is it possible for my iBook to automatically detect whether I'm connected to either my office network or my home USB adsl modem? At present, I have to manually go into System Preferences/Network and switch from one to the other and the

  • SQLException, invalid cursor state

    Came across the weirdest thing... Suppose i use this statement in a servlet: ResultSet result = statement.executeQuery("SELECT City FROM Destinations");and the following code in the JSP to which the browser is redirected: <select name="selectedCity"

  • Sql help please with, finding all zip codes within a given radius.

    I have a table which contains zip, city, state, latdec, longdec, latrad, longrad. From search screen, if user want, zip code's within 10 mile radius of his zip code, what is the sql. I came up with following sql but it is not correct: first, find his

  • CC Desktop disappeared !?

    Hi, Running on iMac 10.7.5. I have no sign of the Creative Cloud app on my Mac, except in the task manager. So I cannot access the interface. Plus Illustrator won't launch. After Effects and Photoshop work though. When I try to install CC again, noth