Adobe Lightroom disk image error

Hi.
I have a MacBook Pro Early 2011.
Running 10.9.4
The issues i have is i cannot install Adobe Lightroom 5.6
When clicking the DMG file it goes so far extracting then stops with an error - Image Data Corrupted
I have been into disk utilities and verified the DMG
I have tried turning off the verify checksum function in disk utilities.
That allows it to extract further start the install but then stops with another error stating contact the software manufacturer.
I HAVE used successfully the same DMG file on my iMac.
It extracts perfectly and installs with no issues.
Confused and stumped.
Thanks.

Hi,
Have a look at this thread: Re: Installation
Basically you will have to download 5.4 to get the MSI then extract and point the uninstall to the extracted MSI file for 5.4
You can download your version from here: Adobe - Lightroom : For Windows

Similar Messages

Can't mount disk image error message for TC

After a couple of frustrating days trying to get a back-up to my TC to work (time wasted waiting for the process to fail each time - Can't mount disk image error type messages etc) I finally got onto this forum and find quite a few people sharing my problem! I wont wait as long next time I have a problem to enter the discussions, tho I must admit I don't get many problems with my Apple gear.
There doesn't appear to be a solution in the threads, but at least I am not alone!
How long before and will Apple fix this?

DiskImageMounter.app is in /System/Library/CoreServices/.

Cannot open disk image Error-4960

Hi downloaded the Master Collection CS6 trail version. Download assist was busy extracting the files when I had to shut down my iMac. I later switched it on and re-opened download assist to continue. An error keeps popping up "The following disk image couldn't be opened Master Collection CS6" (Error -4960). Download assist also seems to be freezing up, because neither the pause nor the cancel button is responding.What should I do?

Jua_Stragie please complete solution 1 in Troubleshoot Adobe Download Assistant - http://helpx.adobe.com/creative-suite/kb/troubleshoot-download-assistant.html#main_Solutio n_1 to reset the Adobe Download Assistant experience.
If you continue to face difficulties then please follow the steps listed at http://forums.adobe.com/thread/981369 to initiate a direct download.

Disk Utility "Unable to create" Disk Image "error -39"

I am trying to create a disk image using Disk Utility of my wife's user area for backup. Everytime I try, I get the same result. Disk Utility spends several hours creating the archive, then at the very end it generates an error message and terminates the process. The error message is always "unable to create "user" - error -39".
The problem follows her data and not her computer. I backed up her user to an external drive and did the image creation on another computer. Same result.
When I do the same on my computer, the process completes fine.
What problem is Disk Utility having? Where can I find the meaning of Disk Utilitility's -39 error?
PowerBook G4 Mac OS X (10.4.5)

I am still experimenting. To narrow the problem, I decided to create individual disk images of the folders in the User folder. The first one I tried was 7 GB and worked fine. Overnight, I tried one that is 13 GB. It failed with an out of room message on the startup disk! The startup disk has 17 GB free. Nothing should have been written to the startup disk!
This time, I configured Disk Utility to read from the startup disk and write to an external disk. The destination disk had more than enough space. But, I ran out of space on the source. It appears that Disk Utility is writing all or a portion of the compressed file to either the startup or the source disk and running out of room.
Previously, when I created the image of my user folder (instead of my wife's), the source was my user folder on the startup disk and the destinaion for the image was on an external disk. The difference I see is that my startup disk has enough free space for the entire compressed image file.
In my first attempt that gave me the -39, both the source and the destination disks were external. So maybe Disk Utility is creating the image on the source and at the end copying it to the destination. This would explain the difference in the error messages.
I'll try to confirm all of this in the next few days and report my findings.

Lightroom disk image won't open

I've downloaded the Lightroom 4.4 disk image twice (to the default download folder) but neither will open on my Snow Leopard Mac. I get a message that it is "not recognized".
What's the remedy?

You're right. I had downloaded twice and got two corrupt files. But the third one's a go.
Thanks Rikk

Disk image error is full

Hey I need some help, I have a 6 month old mac book air and my mac says that I have 53.04 GB free, but every couple of says it will tell me that the disk image is full and will make me force close everything.... Then when I restart my computer, its fixed..... I installed a antivirus software for fear that it was a virus, but that hasn't helped the problem. I have tried apps like whatsize and OmniDiskSweeper, but that doesn't help because I can't run the programs when the disk image is full error comes up because it makes me force close everything.... and when I restart the macbook air, then the files are back to normal. Please help?!?!?!?!!?!?!?!

I don't see anything about a disk image being full.
Your problem is excessive swapping of data between physical memory and virtual memory.
That can happen for two reasons:
You have a long-running process with a memory leak (i.e., a bug), or
You don't have enough memory installed for your usage pattern.
Tracking down a memory leak can be difficult, and it may come down to a process of elimination. In Activity Monitor, select All Processes from the menu in the toolbar, if not already selected. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
View ▹ Columns ▹ Real Memory
from the menu bar.
If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more memory over time without ever releasing it.
If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
sudo leaks -nocontext -nostacks process | grep total
where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the leaks(1) man page and the Apple developer documentation for details:
Memory Usage Performance Guidelines: About the Virtual Memory System

Remove user account and archive as disk image error

Hi guys, I'm having some troubles removing a user from a MacBook running 10.6.6. I want to remove the user and archive their home folder as a disk image (in case I ever need to get access to some of their files in the future). I know it's a fairly straightforward process, I've done it before. I log in as admin, go to system preferences, accounts and then select the account and press the "-" button to remove it. I select the "Save home folder in a disk image" option, and click okay, but all I get is the following error message -
"Unable to delete the user account xxxxx
An error occurred while backing up the user's home folder."
No details as to the error, but the console logs give me this info:
7/02/11 5:28:46 PM [0x0-0x52052].com.apple.systempreferences[756]
2011-02-07 17:28:46.418 writeconfig[763:903] DIHLDiskImageCreate failed: 999 (options:{
I've done this many times before, without a hitch - this one is really giving me grief, so any help would be appreciated.
Cheers,
Matt

Does Disk Utility give your hard drive a clean bill of health?
In any case, I wouldn't try to archive a user's data this way anyway. Far too often I have seen disk images fail to mount with the "no mountable filesystems" error, leaving all the data inside of them irretrievable. It's a much better idea to archive the data into a disk image, and then test that the image correctly mounts, before deleting the user account.
This Terminal command will make a disk image of the user john's home folder and save it in /Users/Shared:
sudo hdiutil create -srcfolder ~john /Users/Shared/john.dmg

Disk image error

I would like to create an encrypted disk image to protect privacy files. But I keep getting an error when creating the disk image, whether I use encryption or not. The error is:
"Unable to create "filename". (error 49168)"
where filename is the name of the file I gave it. I have 12 GB free on my hard drive and the folder I am compressing is only 250MB.

Sundaey wrote:
I would like to create an encrypted disk image to protect privacy files. But I keep getting an error when creating the disk image, whether I use encryption or not. The error is:
"Unable to create "filename". (error 49168)"
where filename is the name of the file I gave it. I have 12 GB free on my hard drive and the folder I am compressing is only 250MB.
I don't quite understand where compression fits in.
You create an encrypted diskimage on the desktop by running DU and creating one.
"New Image"
You give it a name under "Save As"
And give it a password.
This creates an image file and a volume that you can store stuff in.

Lightroom import images error message

I have installed a new version of lightroom onto my new MAC, and I am unable to import my images into LR.
I receive the error message...the following files were not imported because they could not be read... I am able to load the files on a 2nd mac with no problem. I have tried unistalling and reinstalling LR, with no luck. What is going on???? This is so frustrating. I am an avid LR user since version 1 &2 on a PC(new to the MAC world), could it be the MAC?...., however, I cannot figure this one out??
Thanks
Rochelle

I know the message talks of reading, but that one sometimes crops up when the files can't be written. Make very sure that you have write access to the folders that you are copying or moving the images into. Just as an experiment, try Adding a photo from some folder on your hard disk. (Add imports the photo without changing its location.) If that works, it will strongly suggest that you need to change permissions on the recieving disk/folder.
Also, if you are writing to an external hard disk, make sure it's not formatted NTFS. Macs can read those disks, but not write to them. To share a disk between Macs and PCs, you need to format FAT32.
Hal

Adobe lightroom 2 module error

I just installed Adobe Photoshop Lightroom 2, but when I start the application an error comes up " an error occured when attempting to change modules". I am new to the mac so i am at a loss on what to do to fix this. I have removed the program and it .plist file but the error still comes up when i install it again. I loved this program when I used XP so I want to continue this program. Any help will great.
thanks

That would be a problem for Adobe's forums. I've never seen it before personally.

Vista/Adobe 9/sql image Error in Crystal Report:Failed to Export the Report

When I try to export my Crystal Report (v2008) from a Vista machine (using Crystal RDC export methods) as a PDF, I get the following error:
Error in Crystal Report: Failed to export the report.
This only happens when a particular subreport (that contains a sql image) prints (based on an input parameter). We have other subreports (within this same report) that print a sql image just fine. But, when this subreport prints, the above error appears.
I can run the same report on an XP machine without error.
Exportmodeller.dll and crtsv.dll are both installed and registered to the
C:\Program Files\Common Files\Business Objects\3.0\bin folder
I have tried opening the report, removing the image, and then adding it back in again to the subreport.
Still receive the same error.
Any suggestions?

>
Don Williams wrote:
> RDC is no longer shipped in CR 2008. You are using the embedded designer used within the Visual Studio .NET IDE and is not licensed for distribution.
>
> Upgrade to the .NET components and post your question to the .NET forums.
>
> Also, those old dll's will not work in CR 2008. Last patches will give you the option to export to Excel in Legacy mode. We built it into our export dll.
Don,
Can you please clarify?
Our VB6 app that uses Crystal XI RDC runtime components. Our Crystal reports are edited in CR2008 SP1 developer edition (not through the VB.NET embedded report designer). We have deployed the CRXIRelease 2 runtime components (via the merge module) to our client machines in order to execute the RDC.
We can print/preview/export to excel, but the pdf creation is failing with this error.
We are only using the RDC (which we know is no longer supported) because of huge issues with the Crystal for .NET methods we are having with our customers (I have an active case for this issue). Therefore, we have to rollback our .NET product and revert to the RDC code.
Vista is failing to create a PDF for a report developed in the CR2008 SP1 developer edition when using the RDC.
When you say "Also, those old dll's will not work in CR 2008. Last patches will give you the option to export to Excel in Legacy mode. We built it into our export dll.", what do you mean by "will not work in CR2008"?
Thank you

Beta won't install on any Mac. Disk image error

I have downloaded the CS6 Beta from Adobe Labs. And when I try to install in on my Macbook or iMac it gives me an error. Screenshot attached.
I am running on Intel Core 2 Duo and CS5.5 is running just fine.

When you complete the download, compare the file size to the one listed on the download page.
Hopefully it will downloaand install for you this time. If it does not, please reply with details of what issues you have and what error message(s) you receive as well as details of your system (OS and video card)
Thanks,
Pattie

Time Machine error: The backup disk image "/Volumes/----/----MacBook Pro.sparsebundle" is already in use and resource unavailable?

I have a MacBook Pro 13" 2010 model running Mountain Lion. I have always been able to use Time Machine with my Time Capsule. Just today I have been receiving the same error message whenever I would back up my computer:
I removed my name before "MacBook Pro". It takes a long time "Looking for backup disk..." first. The disk I put with the time capsule is called Huge Backup, and in Huge Backup there is my sparsebundle file called "----- MacBook Pro." When I open Finder, open my time capsule, and then open my sparse folder, it should mount a drive where I can see my computer's backups. That doesn't work. Then I get this message:
I once again removed my name before "MacBook Pro" but I can open my sister's sparsebundle who is running Mountain Lion on the same network and her backups work fine. I have researched this topic and have tried to repair the disk in Disk Utility, remount all the drives, remove the drive and restart the backups, and even restart my computer and the Time Capsule. Nothing worked. It just was working yesterday, but now I get this in the settings along with a caution symbol in my menubar:
Is there anything I could do to fix this? Reconnecting it in AirPort Utility (5 or 6) didn't work. Also, for some reason, the error renamed Huge Backup to Huge Backup-1 as you can see above and below in the messages. I downloaded the Time Machine Buddy widget and this is the error report I got. I replaced my names or private info with [-----]. By the way, the network is called NDR Network, and the Time Capsule is alled NDR Time Capsule. Here's the error I keep getting:
Starting manual backup
Attempting to mount network destination URL: afp://[-----];AUTH=SRP@NDR%20Time%20Capsule._afpovertcp._tcp.local/Huge%20Backu p
Mounted network destination at mount point: /Volumes/Huge Backup using URL: afp://[-----];AUTH=SRP@NDR%20Time%20Capsule._afpovertcp._tcp.local/Huge%20Backu p
Disk image already attached: /Volumes/Huge Backup/[-----]'s MacBook Pro.sparsebundle, DIHLDiskImageAttach returned: 35
Failed to mount disk image: Error Domain=com.apple.backupd.ErrorDomain Code=31 "The operation couldn’t be completed. (com.apple.backupd.ErrorDomain error 31.)" UserInfo=0x7ff0a483e6c0 {MessageParameters=(
Ejected Time Machine network volume.
Waiting 60 seconds and trying again.
Attempting to mount network destination URL: afp://[-----];AUTH=SRP@NDR%20Time%20Capsule._afpovertcp._tcp.local/Huge%20Backu p
Mounted network destination at mount point: /Volumes/Huge Backup using URL: afp://Rohan;AUTH=SRP@NDR%20Time%20Capsule._afpovertcp._tcp.local/Huge%20Backup
Disk image already attached: /Volumes/Huge Backup/Rohan's MacBook Pro.sparsebundle, DIHLDiskImageAttach returned: 35
Failed to mount disk image: Error Domain=com.apple.backupd.ErrorDomain Code=31 "The operation couldn’t be completed. (com.apple.backupd.ErrorDomain error 31.)" UserInfo=0x7ff0a343d430 {MessageParameters=(
Ejected Time Machine network volume.
Waiting 60 seconds and trying again.
Attempting to mount network destination URL: afp://Rohan;AUTH=SRP@NDR%20Time%20Capsule._afpovertcp._tcp.local/Huge%20Backup
Mounted network destination at mount point: /Volumes/Huge Backup-1 using URL: afp://Rohan;AUTH=SRP@NDR%20Time%20Capsule._afpovertcp._tcp.local/Huge%20Backup
Disk image already attached: /Volumes/Huge Backup-1/Rohan's MacBook Pro.sparsebundle, DIHLDiskImageAttach returned: 35
Failed to mount disk image: Error Domain=com.apple.backupd.ErrorDomain Code=31 "The operation couldn’t be completed. (com.apple.backupd.ErrorDomain error 31.)" UserInfo=0x7ff0a34410c0 {MessageParameters=(
Ejected Time Machine network volume.
Giving up after 3 retries.
Backup failed with error: 31
[SnapshotUtilities mountPointForVolumeRef] FSGetVolumeInfo returned: -35
Failed to eject volume (null) (FSVolumeRefNum: 0; status: -35; dissenting pid: -1)
Failed to eject Time Machine disk image: /Volumes/Huge Backup-1/Rohan's MacBook Pro.sparsebundle
Please help!

I didn't remove all of my names, so just ignore that...

OS X Encrypted Disk Image Tool Buggy?

Hi,
I'm trying to create an encrypted file directory on an external HDD (My Book). I decided to try the OS X software to create one. I have tried both the following options, each of which has been buggy when transferring files into the created images:
* 50GB Encrypted "Sparse Disk Image"
* 50GB Encrypted "Read/Write Disk Image"
CASE 1 - "Sparse Disk Image" - errors occur when loading data/files into these images. When I check them via Verify the Disk Utility says there is a "Invalid B-tree node size" and the repair does not work.
Questions:
[1] Is this a known Apple OSX bug?
[2] Is there a way to lodge a bug request with apple?
[3] Is there a well known/popular folder/file encryption Mac software package that works that someone could recommend?
Details from the logs:
Jul 1 16:48:43: Disk Utility started.
Verifying volume “raw_data”
Checking HFS Plus volume.
Invalid B-tree node size
The volume needs to be repaired.
Error: The underlying task reported failure on exit
Disk Utility stopped verifying “raw_data” because the following error was encountered:
The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair
Verify and Repair disk “raw_data”
Invalid Volume Header
Checking HFS Plus volume.
Invalid B-tree node size
Volume check failed.
Error: The underlying task reported failure on exit
Disk Utility stopped repairing “raw_data” because the following error was encountered:
The underlying task reported failure on exit
1 HFS volume checked
1 volume could not be repaired because of an error
CASE 2 - "Read/Write" - Failed trying to create image:
Jul 1 17:15:19: Disk Utility started.
Creating Image “raw_data.dmg”
Initializing...
Creating...
Finishing...
Unable to create “raw_data.dmg” - Illegal seek.
Thanks
Greg
MacBook (Intel) Mac OS X (10.4.10)

Is the external drive a USB drive formatted as FAT32? If it's USB and you're using it "out of the box" without having reformatted it, then it's probably FAT32.
FAT32 filesystems can't properly hold a file larger than 2GB. I ran into this with a pocket size 12GB USB drive. Once the sparseimage file gets close to 2GB, things go haywire.
If you don't need to share the drive with Windows machines, reformat the drive as Journaled HFS+, and the problem should go away. Otherwise, keep the sparseimage files well under 2GB.

Can't create disk image with Disk Utility

I just upgraded to OS X Mountain Lion and i can no longer create disk images with Disk Utility in order to store encrypted data.
The operation fails and ends with the post :
Failed to create disk image, error:
hdiutil: create failed - Resource busy
I use three Macs with Mountain Lion, and this problem occurs only on one of the three.
I check the disk, repair permissions and did a reset of the PRAM. I even did a reinstall of Mountain Lion, without success.
But curiously, using a new user account, I was able to create a first disk image. But no one after.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Click the Clear Display icon in the toolbar. Try the action that you're having trouble with again. Post any messages that appear in the Console window – the text, please, not a screenshot.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
DO NOT INDISCRIMINATELY DUMP THOUSANDS OF LINES FROM THE LOG INTO A MESSAGE. If you do that, I will not respond.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

Adobe Lightroom disk image error

Similar Messages

Maybe you are looking for