Adobe Lightroom Will Not Run.....Help

I am trying to run the Windows XP version of Adobe Lightroom 1.0 on a Pentium 4 system with 1.5GB or RAM that meets all the system requirements. After installation the title screen comes up and then gives the error message Adobe Photoshop Lightroom encounted an error and needs to close. The error signature says it is Lightroom.exe ModName: substrate.dll Offset: 0003e413 after which it will close down. I would really like to try this program out and am getting no such luck. This happed with the beta versions as well as the final version.
I have tried to cover all the bases, including uninstalling and reinstalling, even removing the image database thinking maybe that is what is crashes. If anyone has an suggestions I would really appreciate as this sound like exactly what I am looking for.
Thanks,
Travis

I did check that site last night but it didn't have anything that helped. I think I may have tracked it down though. I started shutting down programs on the task bar and tried running Lightroom. After a little while it started working without a glitch. I rebooted, and low and behold the error was back. Come to find out, it was somehow incompatible with Super Screen Capture Pro. Once I turned that off, no problems. At least for now. I will have to keep testing to be 100% sure, but it seems ok with that closed. Thought I would pass this along maybe it may help someone else.

Similar Messages

  • Adobe Flash will not Run

    I have gone through all the forums and installed and uninstalled flash 3 times.  I have gone through the active-x control and still now luck...it wont run although its showing as a successful install.  I am running Windows 7 Home Edition with IE 9 version 9.0.8112, 64 bit operating system with 4.00 RAM.
    I need help...this is frustrating.  I have tried logging onto my son and wife user name on this computer and still flash will not run.
    Thanks in advance for the help.

    See if any of this helps:
    http://forums.adobe.com/thread/885448
    http://forums.adobe.com/thread/867968

  • Itunes error 45075, itunes will not run help

    from a system clean up and deletion of restore points!! iTunes ill not run I have tied reinstalling, repairing, uninstalling following with an install and still it will not run! I have obviously deleted something relatively important and now the computer has no restore point which will resolve my issue.
    Help is greatly appreciated.

    The 2096 erro may be associated with running in compatabilty mode, see:
    http://docs.info.apple.com/article.html?artnum=305212
    None of the tick boxes on the compatability tab should be checked.
    It is also worth checking iTunes.exe in c:Program Files\iTunes.

  • Adobe CS will not run, stops half-way

    I used Adobe CS for many years and now suddenly it will not run. The answer I get is: Photoshop not responding.
    Any suggestions?

    We cannot know. We need system info. Also trash the PS prefs. if they got currupted, there may be issues.
    Mylenium

  • Adobe Suite will not run with most recent Java after I have installed Yosemite

    I have updated to Yosemite for my Mac, when trying to open Adobe Photoshop it prompted me to install Java 6, which I installed, then Java said to update to 8, which I did. My photoshop and other adobe suite programs still will not open (except Bridge) and keeps coming up with the error message to open the webpage to download DL1572.

    This is a strange error. I had the same problem but my CC is running.
    Which is your version of Photoshop please?
    Martin

  • Adobe programs will not run.

    We keep having a recurring problem were adobe products fail to run. The issue is occurring to frequently continue reinstalling the Adobe suite whenever it happens.
    As an example, when you run illustrator the illustrator.exe and pdapp.exe processes start, run for a second, then stop. No errors or splash-screen. No sign that anything has happened.
    Any ideas? I can't seem to find a support number to call.

    This is an open forum with a mix of other users and Adobe staff, not Adobe support... you need Adobe support
    Adobe contact information - http://helpx.adobe.com/contact.html may help
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"

  • ADOBE X will not run a PDF File

    I have Windows
    XP Home Edition 3, have Adobe X
    installed but I cannot read a PDF File. This has been my pr
    oblem for years, Adobe had me uninstall
    Adobe X and install Adobe 7, but it still would not allow me to rea
    d a PDF File. They finally gave up trying to help me. My so
    n in the next room can read a PDF File on his computer, but I do no
    t know what program he has.

    I try to open a PDF File, so
    I click on it and immediately an Error Message appear
    s, saying "Adobe Reader has encountered
    a problem and needs to close. We are sorry for
    the inconvenience.  I click on "Error Information" and I get this- "Error Signature  App Name acrod32exe  Mod Ver: 5.1.2600.5781
    App Ver: 10.1.0.534  Mod Name: Kernel 32.dll  Offset: 00012 afb" I click on Error Description Sent and I have a picture of that page, so I will send that with this letter.

  • Premiere Elements will not run - HELP

    This is infuriating as I had the same problem with PE 8.  I have installed the trial version of PE10 and when I run the application I get the "Welcome to" screen but when I click on either start new project or open project in seems to go through lots of start up loads, then - nothing.  The last thing it does is say "loading Importerquicktime.prm" then it dies leaving the "welcome to" screen.  What is wrong please.  I had loads of issues with PE 8.  It is not looking good for this latest version.

    Buy and install a 2nd internal hard drive for all of your video files and projects... 7200rpm and not a "green" drive
    Or, use an eSata external hard drive... again, 7200rpm
    My 3 hard drives are configured as...
    1 - 320Gig Boot for Win7 64bit Pro and all program installs
    2 - 320Gig data for Win7 swap file and video project files
    When I create a project on #2 drive, the various work files follow,
    so my boot drive is not used for the media cache folder and files
    3 - 1Terabyte data for all video files... input & output files (*)
    (*) for 4 drives, drive 3 all source files & drive 4 all output files
    Search Microsoft to find out how to redirect your Windows swap file
    http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US
    http://forums.adobe.com/thread/784220?tstart=0
    Trying to use only ONE Hard Drive for Video Editing
    You are a music conductor, with a baton that you use to point to various parts of the orchestra... this is like Windows pointing to various parts of the hard drive to do Windows housekeeping or to load program segments for various functions
    Now, at the same time and with the same hand... while still using the baton to conduct the orchestra... pick up a bow and play a fiddle... this would be doing something with your video file at the same time as all the other work
    You as a person cannot do both at the same time with the same hand
    A computer is a LITTLE better, in that it can switch from one kind of task to another very quickly... but not quickly enough for EASY video editing
    You need AT LEAST two hard drives (separate drives, never a partition http://forums.adobe.com/thread/650708 for more) with Windows (or Mac OS) and software on your boot drive, and video files on a 2nd drive so the boot drive is not slowed down by trying to do everything
    I find that the three drives I use work very well for me, for editing AVCHD video... some people use a 4th drive, so video INPUT files are on drive three and all OUTPUT files are on drive four... I only bought a mid-tower case instead of a full tower case (my bad... but had to fit in the space available on my office desk!) so I use the three drives that will fit
    Depending on your exact hardware (motherboard brand & model AND USB2 enclosure brand & model AND external hard drive brand & model) AND the type of video file, you may... or may NOT... be able to use an external USB2 hard drive for SD (Standard Definition) video editing
    Steve Grisetti in the Premiere Elements forum http://forums.adobe.com/thread/856208 and Jim Simon in the Premiere Pro forum http://forums.adobe.com/thread/856433 use USB externals for editing
    A USB3 hard drive connected to a motherboard with USB3 is supposed to be fast enough for video editing (I don't have such, so don't know) but eSata DOES have a fast enough data transfer for video editing... I have not used the eSata Dock below... for reference only, YMMV and all the usual disclaimers
    http://www.amazon.com/Thermaltake-BlacX-eSATA-Docking-Station/dp/B001A4HAFS/ref=cm_cmu_pg_ t

  • CMC will not run HELP!!!! (Tried conifuring it to use SSL)

    Looking for Help. I was trying to configure Business Objects to run with SSL port 443. I configured the Web Application Container Server Settings to use 443. Reboot the server and now I cannot acces CMC through port 6405 or through SSL. My first goal now is to get the BO Server back up and running and I will worry about the SSL later. I did find the config.xml file and tried to change the settings back manually, but they keep getting overwritten each time the server starts back up.
    If anyone has a solution please let me know ASAP as I am in desperate need to get this server back up and running.
    Thanks.

    my mac is 24inch from early , Mac OS X Lion 10.7.5 9 (11g63b) . and yes fcpx has been working fine for months now but on my last project it started making me force quit everytime i try to use it now. i followed the steps with reseting the preferances but i didnt work. i also tried deleting the app and reinstalling , and disk permissions all failed. can u help me out?

  • Error   -2096,       iTunes will not run  HELP AAAAAAAAARRRGGGGGGHHHHHHH

    Anyone PLEASE HELP.......
    My processor died so I now have a new one.
    I have been forced to download the new version of iTunes.
    Everything seems ok until I try to "run" iTunes and the following error message appears.
    Quick Time Unavailable"
    "Quick Time failed to initialize (error-2096)."
    "Quick time is required to run iTunes."
    "Please reinstall iTunes".
    Quick Time operates fine on its own.
    I have reinstalled iTunes multiple times with no success. Is there a fault with the latest software. Earlier versions worked fine !

    The 2096 erro may be associated with running in compatabilty mode, see:
    http://docs.info.apple.com/article.html?artnum=305212
    None of the tick boxes on the compatability tab should be checked.
    It is also worth checking iTunes.exe in c:Program Files\iTunes.

  • Adobe Reader will not run with limited user account.

    I am trying to upgrade our Citrix Server Farm, from Reader 8.0 to 9.1, and am running into some issues.  First I uninstalled Adobe Reader 8.0 and then installed 9.1 from Adobe's site. Aftter the install completed I was able to run 9.1 without any problems.  However today, when some limited users started working, they started getting runtime errors.  This only happens with non-administrator user accounts.
    the error messages are attached.
    After clicking OK, Adobe Reader terminates.
    Any insight would be greatly appreciated.

    I do believe that I solved my own problem... almost.
    http://kb2.adobe.com/cps/404/kb404597.html
    "The affected user has a redirected Application Data folder and as a result the network path containing the Application Data uses a UNC path that begins with \\. This UNC path causes Acrobat 9.0 or Adobe Reader 9.0 to incorrectly parse the Application Data path and give the error message."
    The article tells me to upgrade to Adobe Reader 9.1...   WTF!!!  9.1 is when this problem started, 8.0 worked great!  I would stay with 8.0 if I could, but some of our programs require 9.1.

  • Adobe Lightroom will not start or open

    Install lightroom.  Everytime I try to open lightroom I get the following error:
    Lightroom cannot create a catalog named "Ligthroom 3 Catalog" on a network volume"
    Anybody have any ideas?
    Thank you in advance.

    The error message is telling you what is wrong from LR's point-of-view.  You have to use LR with a catalog on a locally attached hard-drive, not a network drive.  The catalog that LR is either automatically trying to open, or that you are selecting to be opened is on a network drive not a local drive.
    When you start LR for the first time, or if you press the Alt key while starting LR, you should have the option to create a new catalog.  Do this and make sure the catalog location you select is on a local drive and not a network drive.  The reason for this restriction is that LR's catalog file must not be accessed by more than one person at a time and having it on a network invites this complication.  LR is licensed for a single user at a time, not a multi-user network situation.
    If you have installed LR on a network-bootable workstation that has no locally-attached hard-drives then a possible option would be to attach a hard-drive via USB or Firewire and use that for the location of the catalog.  It would be slower than an internal drive, but if that's your only option, it is an option.  Of course if your workstation doesn't have a local drive and doesn’t' allow attaching drives via USB or Firewire or eSATA, then you're out of luck and need to try a different computer that has local storage available.

  • Purchased Adobe product will not install/Help!

    I purchased the SummerElements Special / Photoshop Elements 10 & Premiere Elements 10.
    I have tried most of last night trying to install Premiere Elements 10. I no longer have any Idea
    what to do!
    [email address removed]

    Jordy,
    As Mylenium asks, please tell us more.
    PrElements ships (with the physical media) with 2 separate Windows versions, 32-bit and 64-bit, and then a 32-bit Mac version. It also comes with Additional Functional Content on a separate disc, that cannot be installed, until after one has successfully installed the correct version of PrE. The markings on the discs are not really the best, and Adobe should make all that more clear.
    What is your platform, Mac, or PC?
    If PC, what OS, 32-bit, or 64-bit?
    Exactly which disc are you trying to install from?
    Good luck,
    Hunt

  • LIGHTROOM WILL NOT RUN (previously had trial version)

    I cannot get LR to run on my computer. I unistalled and reinstalled several times. I am extremely annoyed. I have a lot of work that I cannot do because of this!!!!!

    You need to uninstall the non-CC trial of LR which is licensed by a serial number.
    You need to install the CC version of LR which is licensed with a CC Desktop login.
    After you have uninstalled the non-CC trail of LR, you need to log out of the CC Desktop app, via CC-Desktop: Preferences / Account, and then reboot, and sign back into the CC Desktop app.
    This will get the CC Desktop to rescan your computer for what is currently installed and offer the LR CC as one of the installable programs.  You should also be able to download and install the LR5 CC version from https://creative.acobe.com/products
    I don’t know anything about having to clear the temp folder.

  • Free Adobe Flashplayer will not download, HELP

    HELP

    this is not the FLASH help forum.
    Without details / error messages, etc., users are not going to be able to help you - even if you were posting in the right forum.

Maybe you are looking for