Adobe Lightroom3 won't print after Security and Airport updates.

10.6.7
8gb Mac Mini intel...
using epson 2400 and other printers, the print job does not show up in the printer que- printers work in other apps like photoshop....
deleted and added the 2400 to the printer and fax in system prefs....

Thanks, but I found the problem, silly - I must have been printing a multipage photo set and I set the page to 7 to 7, when I changed the page to all, it printed.
Thanks all for the responses.
Paul

Similar Messages

Epson R280 printer won't print after Apple Epson driver update

I have a 27" iMac running Mountain Lion. I use an Epson R280 printer to print directly onto CD/DVD media. Have used this printer daily for over three years. After an Apple Epson Driver update, I get a 'communication error' message and cannot print. Uninstalled and reinstalled printer. Power cycled printer and rebooted iMac. No Change. Hooked up same printer to my MacBook Pro running Mavericks and printer works. Ideas?

Thanks, Eric. I had tried that previously, but had no luck. I would add the printer back in after Reset, and it still didn't work. The real key step which I found from a previous solution was taking the existing print drivers in Library/Printers/Epson and trashing that folder and then emptying the trash. With those drivers gone, when I rebooted and then powered up and added the printer, Apple prompted me to download new drivers, and 'Voila!'. Back up and running. Thanks much.

Cannot Print to Windows Printer after Security 2008-002 update

I am unable to print to a Canon image runner 3380 printer on a Windows network after installing Security update 2008-002. Whenever I try to print I get the following error: On Hold Authentication Required. I can click on the Resume button in the print queue and a box pops up to enter my username and password. I've tried entering my user name and password but it does no good. I've also tried reinstalling the printers which also does me no good.
This printer is located on a Windows 2003 server that is setup as a Domain Controler.

I did some searching -- more info: This is apparently due to an upgrade to CUPS, which is the Common Unix Printing System (available to administer directly at: http://localhost:631/ ) This is the way to add a printer if you feel especially geeky.
There is another discussion: http://discussions.apple.com/thread.jspa?messageID=6914585&#6914585
about this, but apparently it is not a resolution, just a description of the problem.
So, I really don't want to deinstall the 2008-002 update, if I can help it. I already installed version 1.1, which did not resolve the issue. I would like to be able to print to my Windows-Active Directory printers without resorting to IP printing. It sounds like this is something Apple has to fix, from the discussions I read. Is this true? And if so, any ideas about how long Apple will take to fix it?

Quicktime X broken after security and Safari updates.

Ran software update yesterday and updated Safari to 5.1.1 and got the latest security update. Now Quicktime X is broken. Still have the app but the icon is missing and it won't start. My old QT 7 still seems to work fine. Tried repairing permissions and restarting several times. Any other ideas? Wish they would just allow us to download and install QT X...

Sorry to say but this did not work for me. I was able to find an installation of QTP 7.6.4 (which still has the Quicktime Preferences menu option). However, I was not able to install the older version of QTP even after trashing QTP app, and its associated preference files and rebooting my MacBook Pro. The installation program displayed a message that a new version of Quicktime was detected and would not allow me to continue the installation of the previous version. I then found a program called Pacifist http://www.charlessoft.com/ that allowed me to do the installation.
My reference movies are now behaving as they should. Unquestionably there is a problem with Quicktime Player 7.6.6 which Apple really should address right away.
BTW, after doing this, my Pro key seems to be intact. I just purchase Final Cut Studio upgrade. I guess I leave QT 7.6.4 and ignore software updates fopr Quicktime until I see 7.6.8.
Unfortunately, I'll have a difficult time explaining this to my clients. In effect, this screw up by Apple makes it inadvisable for me to provide reference movies with alternates for my clients.

Canon i550 won't print with MacBook and Airport Extreme

Since we got a new MacBook, we upgraded our Airport Express (b/g) to Airport Extreme (n). Needed tech support from Apple to get the computers on the internet (something about the cable company switching IP addresses), which worked great, but since then the only problem is that I can't print wirelessly from the new MacBook to our Canon i550 printer, which is hooked up by USB to the Airport Extreme. (Ironically, when the internet wasn't working through the Airport Extreme, the one thing that DID work was printing wirelessly.) The other computer, a 2007 MacBook Pro, prints wirelessly with no problems, but I see that under "location" in the print utility it still has "Express" listed (on the MacBook I get the new network name, "Airport Extreme"). I've tried reselecting the printer in Bonjour, reselecting it in AirPort Utility under Printers, turning printer on and off, but no matter what, in the printer status box it just says "Connecting", and never actually prints. I just upgraded to 10.5.6 which still didn't help. Anyone have any thoughts? Thanks.

Welcome to the discussions, Brian!
Please work your way through the Apple Troubleshooting Guide to see if your HP might be compatible with the AirPort Express.
Keep in mind that if your device is compatible, only printing is supported at the USB port on the AirPort Express. So, if you need to scan, copy, fax or check ink levels, etc., you will need to hook the device directly to your computer.

Apps won't work after sync and software update

Just syncd my ipod 4. Now FB, games and other apps won't work. The screen just goes blank. Re did the sync and still nothing. I really don't want to restore the settings because I have a lot of info on this pod. What can I do?

Try restarting your iPod by holding down the on/off and home buttons at the same time until you see the Apple logo, if that don't work try double clicking your home button to open your multi-task window hold you finger on the first app until it start to wiggle and the red minus sign shows up in the left corner tap the red minus sign to close all of your open programs.

Hp 5510 won't print black before and after installing new cartridge. have done specified checks.

HP Photosmart 5510 won't print black before and after installing new cartridge. Have done specified checks.

sueali301 wrote:
Been through all steps. Cannot find levers.The printhead on the Photosmart 5510 is not removable. For the Photosmart 5510 the troubleshooting steps in the document here may help. Especially make sure the vents are cleared. If that does not resolve the issue then resetting the printer as described in the post here may help. If this does not resolve the issue then read the entire thread here and try requesting reset instructions. If your printer is under warranty I suggest you contact HP for warranty service. If you are in the US call 1-800-HPINVENt, elewhere see the contact information here.

Adobe PDF won't print non-working time colour in MS Project

Adobe PDF won't print the colour chosen for non-working times in MS Project. I have tried changing the colour, changing the style, moving non-working time in front of tasks and have fiddled with the printer properties, all to no avail. It ignores whatever style I have for non-working time and makes a blank space, although it will take gridline changes . . . . please help!
Shevaun

Thank you for providing the suggestion and the Cleanup tools, however they did not help.
I ran each version of the cleanup tool, and for each I had it clean up Reader and Acrobat (i.e. 4 separate cleanup operations). I then rebooted the machine, and installed Reader 11.0.3.
Still had the same behavior: Reader will not print. I tried printing to a second printer (that is attached via USB)...and it did not work either. I also tried printing to a Cute PDF Writer print driver...and that did not work either. In each case, no print data made it to the Windows print queue (as demonstrated by watching the queue while printing.) No error was raised, but no print data was transmitted.
I then uninstalled Reader 11.0.3, rebooted, and re-installed Reader 9: printing works fine now.
There is definitely something in Reader 10 and Reader 11 that breaks printing in some environments. (As you alluded to...I have seen a number of postings online about printing problems in Reader.)
More details about my environment:
Windows 7 Professional N (Version 6.1, Build 7601: Service Pack 1)
VMWare virtual machine
Two virtual CPUs (each: Intel Core i7 920 @ 2.67 GHz, 2673 Mhz, 1 core, 1 Logicial Processor)
Hardware Abstraction Layer: 6.1.7601.17514
RAM: 3096 (allocated to virtual machine)
Bridged networking
VMware host:
Windows 7 Ultimate, 64-bit 6.1.7601, Service Pack 1
18 Gig RAM
Intel Core i7 CPU 920 @2.67 GHz
VMWare Workstation 9.0.2 build-1031769
(but problem existed on older version of VMWare Workstation 7.x as well)

I installed the latest Security and Safari update. Now Safari crashes and Chrome won't launch at all. Can I revert to the software state before the newest updates?

After installing the latest security and Safari updates (18 Sept 2013), Safari crashes and Chrome won't launch at all. Can I revert to a software state before this latest install?

The problems are caused by third party input managers/enhancers that have not yet been updated by their developers to comply with the standards used by Safari 3.2.1. and/or Safari 4.
In your case these are:
x7e3000 - 0x7e3fff com.aladdinsys.mmenabler 7.1.0 (99) /Library/InputManagers/MagicMenuEnabler/MagicMenuEnabler.bundle/Contents/MacOS/ MagicMenuEnabler
0x7e7000 - 0x7e7fff com.yazsoft.SDEnhancer ??? (1.0) /Users/peterdignam/Library/InputManagers/SpeedDownload Enhancer/SpeedDownloadEnhancer.bundle/Contents/MacOS/SpeedDownloadEnhancer
0x254a000 - 0x254dfff com.yazsoft.SDSafariBundle ??? (1.0) /Users/peterdignam/Library/InputManagers/SpeedDownload Enhancer/SpeedDownloadEnhancer.bundle/Contents/Resources/SDSafariBundle.bundle/ Contents/MacOS/SDSafariBundle
You fill find them in one or either of these folders:
Home/Library/Input Managers
Hard Disk/library/Input Managers
Hard Disk/Library/Application Support
although the exact location is indicated in your crash report as quoted above - look under 'Binary Images'.
Close Safari and delete them, then restart Safari and it should be working normally.
Check with the developers of the plug-ins in question for updates that are Safari 4 compliant.

After AVG PC Tune up, software update message for security and stability update is available FireFox 3.6.18. Should I Update?

My Dell laptop (Operating on Windows XP) was hit with multiple viruses - I could not open Mozilla Firefox or any other applications for that matter. After much time and many attempts, I was finally able to install and run an AVG Scan and then an AVG PC Tune up. 4,559 problems found and repaired. After the repairs, I received the following message:
"Software Update - A security and stability update for Firefox is available: Firefox 3.6.18 - It is strongly recommended that you apply this update for Firefox as soon as possible. - an underlined link reading, "View more information about this update" and then 2 choices - "Ask Later" or "Update Firefox." Since part of the problem was with Firefox and some error messages pointed to that, I'm hesitant to click on any of the three options above. Can you help me to get past this error message, please. I am sending this from my home computer. Thank you. Diane

Sometimes the updater gets in a funny state - Go to http://www.mozilla.org/en-US/firefox/new/ and download the full installer. Close Firefox and run the installer

Where do I find the Adobe pdf 9.0 printer description file and how do I install it?

Where do I find the Adobe pdf 9.0 printer description file and how do I install it? Operating system is Windows 7 and I have Adobe Creative Suite 5.5 installed. Adobe Acrobat X Pro just updated to version 10.1.8

Hi. Thanks for the replyl
I'm in prepress, working mainly with Quark XPress for advertising files and with Word, Photoshop, everything, for many years. My older computer is the workhorse with Quark 6.5 and CS4 and OSX 10.4.11. Everything is set up for me to produce PDF x1a files by printing .ps files from Quark and Word, and InDesign.
My newer computer, OSX 10.9.4, must now be used to a greater extent. So I have Quark 9 and 10 and now Creative Suite for the Cloud. But I don't have any Adobe PDF printer which I select when I print .ps files and place into my Distiller Watched Folder. I by pass selecting the Adobe PDF printer in Word and just print straight to .ps. The .ps file just sits in the Watched Folder and no longer flows into Distiller, processed and out. Is this the way of the future? I just want a smooth, fast flow for PDF's. I want them to be PDF x1a compliant for hi-quality printing.
Thought you might help to give me info as to how one uses Distiller (or not) with the new operating system and latest programs. Can't seem to find any info as of yet by searching the Adobe FAQ's and the Internet in general.
Thanks alot.
Larry Winer

8500A Plus Won't print after idle 20 mins

Windows 7, 64 bit, no service pack yet. Tried updating firmware, but by computer grays out the printer option. This is my THIRD printer from HP (exact same model) that has had the exact same issue. Must be a software issue, but can't find it. Printer won't print after idle for 20 mins. Goes into printer que, but doesn't complete. Issue started Jan 2, no big changes to computer at time. Has anyone had this issue that can help? I'm about ready to go buy a Brother. Thanks

The first thing I would do is follow step six in this document to set a static IP: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02790693&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us...
When it askes for DNS information, enter in Google's DNS. Preferred DNS = 8.8.8.8 Alt DNS = 8.8.4.4
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Why won't the 5.0.1 "security and stability update" download? All I get is pinwheel (MacBook pro, OS 10.6.8)

For weeks now, I get a daily "SOFTWARE UPDATE" pop-up window urging me install a "security and stability update" for Firefox 5.0.1. if I ignore it or click ASK LATER, it comes back. if I click UPDATE FIREFOX, all I get is pinwheel, for hours, with no progress in striped progress bar.

Hello:
First, permission repair is, IMHO, a waste of time. In the old days, we whispered that like some sort of incantation. I have not seen a permission problem in years. The messages, incidentally, are not a concern. Apple has gotten smart with OS X 10.7 and eliminated them.
If you were having problems, running repair DISK from your software install DVD is a good idea.
What updates were to be installed? In any event, trash a preference file (com.apple.softwareupdate.plist) and restart.
Barry

HT4623 iPhone 4S won't start after iOS 6.01 update any ideas

My iPhone 4S won't start after doing the latest update that came out today I believe it was iOS 6.01 or 6.1

Have already tried that to no success. I have hooked it up to the computer and itunes came up saying phone was in recovery mode and needs to be restored.. So im i the middle of trying that. Thanks for the suggestion..!!

Security and stability update firefox 8.1 Imac

I have i mac OS X ver 10.6.8 desktop
I use fire fox and the message comes up on my screen with the words:
security and stability update for Firefox is available:
'''Firefox 8.0.1
it is strongly recommended to apply for update for Firefox as soon as possible.
I click for update and it does not update but shows the window doing update ; the action never ends. After few hours i stop it

Try the alternate and easiest way by downloading from here
* getfirefox.com

Adobe Lightroom3 won't print after Security and Airport updates.

Similar Messages

Maybe you are looking for