Adobe loader fails to complete

cs6 photoshop..Student version installed.. Blue screen of death required system restore to befor that installation.
Trying to reinstall, but adobe loader fails to complete. Any ideas?? Thanks Ray

We cannot know. We need the exact crash info and at least some system specs. Refer to this:
Working with your Operating System’s Tools
That aside, if you ran a system restore, the install would be busted from stem to stern. Run the Creative Suite Cleaner Tool and try again. If it still doesn't work, we need install logs.
Mylenium

Similar Messages

"Load files into Photoshop layers" fails to complete CS6

Hi all,
Hoping someone can help with the folling problem with Photoshop & Bridge CS6
When in Bridge, after selecting 6 images (CR2) using the command TOOLS>LOAD FILES INTO PHOTOSHOP LAYERS the first file will load into Photoshop, Photoshop will then generate a second blank layer and then read the second file. At this point the "script" will stop. I am left with a document with 2 layers. The top layer has my first image, the bottom layer is empty.
At this point when I quit Photoshop I am prompted to save this open document which appears to be the only open document. I choose not to save this as a file. I then get a dialogue box prompting to save another open document. Photoshop has loaded the second file to place as a layer but as the "script" has aborted I am left with an open, but invisible file.
When I first loaded CS6 on Snow Leopard, it would demonstrate this behaviour every time I attempted to run this command from Bridge.
I did a clean install on a blank HDD of OSX Lion. Installed CS6. The command worked without fail for about a month.
Then I would get the command aborting occasionally. Restarting Photoshop would let me continue for a few hours before this aborted script problem would happen again.
Over the last week it has become more frequent, to a point where this workflow is unusable.
A restart of Photoshop may fix the problem for the next batch of images, only to fail again soon after, or fail on the first attempt after a relaunch of Photoshop.
A reboot of my computer will allow my to load one or two sets of files before again failing to complete the command.
I have tried the following:
In Photoshop preferences:
disabling the "Use graphics Processor"
Increasing or decreasing the amount of RAM available to Photoshop
Changing the cache levels or changing the cache tile size
changing the scratch disk
Trashing the Photoshop preferences file (Photoshop Settings.psp)
In Bridge
Purging the cache
Increasing or decreasing the cache size
Resetting Bridge preferences (holding Command on launch) and deleting all cache files.
In general system
Quitting extra programs (Safari, Thunderbird, iTunes)
Sometimes this will seem to then allow Photoshop to load a full set of images, only to abort again after a few sets.
Rebooting the computer - again will work for a few images sets before again failing.
Now the fact that it worked fine for several weeks without presenting a problem would indicate that it is not a bug.
The fact that is slowly started happening then became more frequent would indicate something changing slowly over time - a larger cache folder perhaps, although purging known Bridge cache folders has not filed the problem.
Really at the end of my tether here. Even considering downgrading to CS5 - but don't want to have to use the older Adobe Camera Raw.
System is as follows:
Mac Pro 2 x 2.66 Quad Core
24GB RAM
ATI Radeon HD 4870 512
OSX Lion 10.7.4
I have seen a couple of others have posted having a the same problem, both with CS5 and CS6.
Hoping someone has an answer.
Thanks.

Hi JJMack - I just re-read your post. For some reason I thought you were suggesting to make sure "Open documents in Tabs" was selected, it was. Now I realize you were suggesting to turn it off! As another attemp to solve this problem I did de-select it today. Seemed to work for a good while. I was getting very excited, then, on the last set of images I had to do it displayed the same problem. But, it did go for quite a while without failing, and when it did I was thrashing about trying to make another app active. When loading documents like this - with "Open documents in Tabs" de-selected, Photoshop wants to put the loading images as the front-most window, no matter what other apps (Bridge, email, web etc) I click on in the dock. I think it is related to the bug you described effecting the "load files to stack" command.
Hopefully Adobe is looking at this - mind you, I have read reports of people having this problem in CS5! Looks like that was never resolved sadly.
I'll keep testing and post back.
I am looking to upgrade my video card to see if it's a video memory thing.
What is very weird though is the fact that this problem didn't present itself until after several weeks of working with this command with no problem. No additional apps installed, nothing changed. Why would it start happening only after a while?
Thanks again for your suggestion.

Why should Adobe Reader fail to print because of settings in the Edit/Preferences?

AdobeReaderDocumentCouldNotPrint.txt
Glyn Price Tue 17 March 2015
Why should Adobe Reader fail to print because of settings
in the Edit/Preference?
Adobe Reader XI Version 11.0.10
MS Window 7
File > Print > Print
I got the error message:
The document could not be printed
I googled this error message and used the following
solution that worked i.e. it then printed successfully.
Edit > Preferences
Category: Security(Enhancement) 'Enable Protected Mode at Startup'
It was checked, changed it to unchecked.
Category: Documents 'View documents in PDF/Mode'
It was set to 'Only for PDF/A'
Set it to 'Never'
Exited Adobe Reader and restart it. Then it printed.
I had a look on another computer system (Adobe Reader XI Version 11.0.10
and MS Window 7) and on this different computer I could print
without doing the above two changes.
I'm a bit puzzled. Why preferences on one system were not
needed on a different system?

Here is an elaborate method of troubleshooting this problem. There may be a simpler method if anybody wants to suggest one.
There is a general technique that is helpful in this situation. I can't give you complete instructions here, and I haven't tested this with regard to bluetooth devices, but here's the gist of it.
Create a second log-on account for your music projects. Configure it so that when you log in to the new music account, the drivers needed for the Bluetooth devices don't load. You do this in System Preferences: Accounts.
When it's time to do music, log out of your usual account and onto the new one.
When you install drivers for any peripheral, you have the option of installing them "for all users" or only for the user account that is active during the installation.
This governs whether the drivers go in root/library or root/Users/your name/library.
If drivers are in root/library, they will load whenever the Mac is booted up and will run for all users.
But if drivers are loaded in root/Users/your name/library, they will only load if you log in as "your name". If you have a second account called root/Users/music account/, and you log in under that, the drivers in "your name" will not load. Get it?
To get this working right you need to be knowledgeable about moving or deleting files in the /library/ directory and subdirectories, and you need to be careful because you can unwittingly cause some damage if you are not careful.
There is also the root/System/library directory, and in general you should never mess around with anything in there or you might hose your system.
In summary, I would start by using the installer programs for your BlueTooth devices and DE-installing all drivers. Reboot. Log back in as your usual user account. Then RE-install each driver and see if the installer program gives you the OPTION to installl for all users or just for this user. Choose the latter. Then log on to your new Music account and see if the problems go away.

Incremental load fails with the error LM_44127 Failed to prepare the task

Guys,
I have created a custom mapping and cretaed a execution plan for this mapping in the DAC. The full load completes successfully. But when ever the incremental lod is run , i am getting the below error and the task fails(The SDE load completes sucessfully , but the SIL load fails with the below error).
LM_44127 Failed to prepare the task
Please help!!!

i googled it..
http://datawarehouse.ittoolbox.com/groups/technical-functional/informatica-l/lm_44127-failed-to-prepare-task-when-running-workflow-in-informatica-86-on-aix-3199309
you can try for better links now.. !!

Package load Failed! Invalid package Title, manifest file cannot be found

Greetings. I am new to UPK and am seeking guidance on an upgrade to 11.1.
A little background on what we are trying to do:
We have two machines:
Windows 2003 machine in domain 'X' | UPK 11.0.0.1.
Windows 2008 R2 virtual machine in domain 'Y' | UPK 11.0 on the new machine first, install the 11.0.0.1 patch, and then upgrade to 11.1.
We are using the same database as the old machine. Developer Server is Standard Authentication, Knowledge Center is Windows authentication.
==========================================================================================
So far we have installed 11.1 with the respective database upgrades, but are lost as to how to migrate the old Content Root data. We have copied all the content to the new Content Root, added it to IIS like the old machine, and verified that the UPK database Content Root path is correct and working.
For the rest of the post, I am remoted into the server from my local workstation, and then using IE to access KCenter on the server's FQDN, not via localhost.
Since I am green, so I presumed that I would need to import the titles under Manager in KCenter. I zipped each content folder individually (they are named "1", "9", etc), and then attempted to import each zip file.
NOTE: At this stage sometimes we are prompted to authenticate again. When it does, sometimes the credentials that we know work, get rejected and we are prompted again. This will repeat until we get a 401 and we have to start over. We have verified that the Windows account currently in session with the site is valid and has administrator authority within KC.
NOTE2: On the first few tries, .NET complained that maxRequestLength was not large enough. I had our servers team increase it on the actual server in order for us to proceed.
Provided we don't have to authenticate again, or that it actually accepts our credentials, we get to the 30% mark and then receive the error: *"Package load Failed! Invalid package Title, manifest file cannot be found"*
Does anyone have any wisdom for this process? The title importation section in the deployment manual is not helping, and the administrator from whom I am taking over this software has not had to deal with this before.
Thank you,
Ian
Edited by: 986290 on Feb 5, 2013 10:21 AM

Hi Marc, thanks for the post,
I have gone through an extensive troubleshooting process with Oracle, including their development team, in order to fully complete our project setup. As a supplemental bit of information, we also were having connection errors when attempting to publish directly to the knowledge center.
As far as the context of this post, here is the solution in brief:
1) Verify that the package being imported was published from the same version of the Developer Client as the Knowledge Center installation's.
2) Check for database consistency issues. In our case we were using a database that was built in another domain. After numerous attempts with Oracle support on the line to determine the inconsistency, it was decided to completely reinstall and build a new database from scratch in the new domain.
3) Check application pool identities and access (while we had some inconsistencies here, correcting them did not change the behavior of the import/publish errors)
In review, a lot of what we had setup was correct. Our primary point of failure, we feel, was using the old database. Technically this should not have been a problem, but Murphy likes to get his way sometimes.
Cheers,
Ian

Bridge update freezes at 12% and fails to complete the update process why?

The new update release for Bridge fail to complete it stops at 12% and will not finish. Does anyone know why the update will not install?

What specific update are you installing? Do you receive any specific error messsages? If not then you can check your install log for the source of your difficulties. You can find details on how to locate and interpret your installation log at Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html.

IPad fails to complete IOS 4.3 update

My iPad failed to complete the IOS 4.3 update. The message in iTunes said the iPad needs to be restored, but the restore fails to complete. I tried a different cable and USB port on my iMac. I charged my iPad for a few hours and tried it again. My iTunes is version 10.2.1. This is a iPad 1 (Wifi version).
iTunes runs through the restore process until it says "restoring iPad software" and almost completes the install. The restore completes until about 90% or so of the way and just hangs up.
Any help would be appreciated.

I had the same problem and called Apple. Here's what we did: I held down both the Home button and the Sleep button at the same time until the iPad rebooted. Then the iPad screen changed to the iTunes icon and a USB cord. When I opened iTunes, I could now see the iPad (previously it hadn't shown up) and got an error message. The Apple tech said I would need to restore the factory settings. I did and it took a while since my iPad is loaded with aps and music, but it all came back since it was backed up on my Mac.
Good luck! They are hearing from a lot of people with this (but I'm the only one I know with an iPad who had the issue) and didn't charge me--I don't have the extended care plan.

Payment engine failed to complete installation at startup

Hi All,
When first logging into SAP B1 8.8, the payment engine installation message came up but then it display error message "1628: Failed to complete installation". But when logging in as administrator on the server, the payment engine loaded ok.
I'm suspecting it's got to do with permission of certain payment engine files so i set full control for all users to SAP AddOn folder but still no luck.
Did anyone have this problem and know what the cause is?
Thanks,
Ric

Hi Ric,
Please navigate to run --> %temp% and rename the folder SM_OBS_DLL as SM_OBS_DLL_old and restart SAP Business One.
Let me know if this works or you will need to remove Payment add on details from the C:\Program Files\SAP\SAP Business One\AddOnsLocalRegistration.sbo open with notepad. Is this occurig on one client machine or on all user machines
Regards,
Rakesh N

Adobe Downloader failed in PSE 11

Just installed Photoshop Elements 11, left PSE 10 on the computer. Down loading files from my canon memory card I get
Adobe Downloader failed, error messages:
c:\users\papa\appdata\local\temp\WERBBDF.tmp.WERInternalMetadata.xml
and \WERD20E.tmp.appcompat.txt
and \WERE467.tmp.mdmp
I replaced elements 10, downloader would quit with the former error code:
encountered a problem, error code c0000005 address 77ce3e04
If anyone has a fix, I'd appreciate it.
Tom

Old problem under PSE10, could open organizer, APD always failed. Installed new PSE11, organizer opened, APD started, showed the three WEBB errors listed above in the thread. Yesterday, organizer opened, APD ran, got right to where it shows the new files in the organizer and failed. With that failure, organizer won't open all the way and says it failed.
Today, restarted the computer, Organizer PSE11 starts to open, shows it failed to open, will look for answers, blah, blah after closing the application, little microsoft wheel goes round and round for a minute next to the cursor, like something is having trouble closing, (but nothing running in the task manager window, then returns to a normal cursor. Will try removing PSE 10 from the programs and will look and see if Adobe has a program remover that takes out the little artifacts left behind. Appreciate your brainpower in thinking of things to try. Thanks.

(Loader Class AS3) How to check load fail?

Hi everybody, I have used Loader Class to load a JPEG file into my Flash movie during runtime.
my_loader.contentLoaderInfo.addEventListener(Event.COMPLETE, startListener);
my_loader.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS, progressListener);
I'm only able to check event completed and event in progress. Is there a function to check load fail? I want my flash movie to show an error textbox pop out when the Loader Class is unable to find the JPEG file.

my_loader.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR, ioErrorHandler);
function ioErrorHandler(event:IOErrorEvent):void {
trace("ioErrorHandler: " + event);
}

CSD Load Data Full completing with Could not find server for data domain Error

Hi,
We have installed the Oracle Ebusiness suite extension with Endeca following the Oracle Support note : 1562372.1.
We found that the CSD Load Data Full completing with below error :
Element [ENDECA_MERGE_RECORDS0:Bulk Add/Replace Records]-Component pre-execute initialization failed.
        at org.jetel.graph.Node.run(Node.java:446)
        at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1145)
        at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615)
        at java.lang.Thread.run(Thread.java:722)
Caused by: Failed with the following exception:
        java.rmi.RemoteException: Could not find server for data domain Error connecting to the Endeca Server. If applicable, ensure your SSL settings are correct; nested exception is:
        org.apache.axis2.AxisFault: Could not find server for data domain
        at com.endeca.clover.adapters.BaseAdapter.preExecute(BaseAdapter.java:155)
        at org.jetel.graph.Node.run(Node.java:444)
        ... 3 more
Caused by: java.rmi.RemoteException: Could not find server for data domain Error connecting to the Endeca Server. If applicable, ensure your SSL settings are correct; nested exception is:
        org.apache.axis2.AxisFault: Could not find server for data domain
        at com.endeca.clover.adapters.DIWSConsumer.initIngestStub(DIWSConsumer.java:99)
        at com.endeca.clover.adapters.DIWSConsumer.<init>(DIWSConsumer.java:45)
        at com.endeca.clover.adapters.merge.MergeRecordsConsumer.<init>(MergeRecordsConsumer.java:51)
        at com.endeca.clover.adapters.merge.UpsertRecordsConsumer.<init>(UpsertRecordsConsumer.java:36)
        at com.endeca.clover.adapters.merge.MergeRecordsAdapter.getConsumer(MergeRecordsAdapter.java:110)
        at com.endeca.clover.adapters.DIWSAdapter.createConsumerThreads(DIWSAdapter.java:56)
        at com.endeca.clover.adapters.BaseAdapter.preExecute(BaseAdapter.java:146)
        ... 4 more
Caused by: org.apache.axis2.AxisFault: Could not find server for data domain
        at org.apache.axis2.util.Utils.getInboundFaultFromMessageContext(Utils.java:446)
        at org.apache.axis2.description.OutInAxisOperationClient.handleResponse(OutInAxisOperation.java:371)
        at org.apache.axis2.description.OutInAxisOperationClient.send(OutInAxisOperation.java:417)
        at org.apache.axis2.description.OutInAxisOperationClient.executeImpl(OutInAxisOperation.java:229)
        at org.apache.axis2.client.OperationClient.execute(OperationClient.java:165)
        at com.endeca.dataingest.axis2.ingest.IngestStub.ingestChanges(IngestStub.java:791)
        at com.endeca.clover.adapters.DIWSConsumer.initIngestStub(DIWSConsumer.java:88)
        ... 10 more
Kindly request your help in resolving this error.

Hi,
We have installed the Oracle Ebusiness suite extension with Endeca following the Oracle Support note : 1562372.1.
We found that the CSD Load Data Full completing with below error :
Element [ENDECA_MERGE_RECORDS0:Bulk Add/Replace Records]-Component pre-execute initialization failed.
        at org.jetel.graph.Node.run(Node.java:446)
        at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1145)
        at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615)
        at java.lang.Thread.run(Thread.java:722)
Caused by: Failed with the following exception:
        java.rmi.RemoteException: Could not find server for data domain Error connecting to the Endeca Server. If applicable, ensure your SSL settings are correct; nested exception is:
        org.apache.axis2.AxisFault: Could not find server for data domain
        at com.endeca.clover.adapters.BaseAdapter.preExecute(BaseAdapter.java:155)
        at org.jetel.graph.Node.run(Node.java:444)
        ... 3 more
Caused by: java.rmi.RemoteException: Could not find server for data domain Error connecting to the Endeca Server. If applicable, ensure your SSL settings are correct; nested exception is:
        org.apache.axis2.AxisFault: Could not find server for data domain
        at com.endeca.clover.adapters.DIWSConsumer.initIngestStub(DIWSConsumer.java:99)
        at com.endeca.clover.adapters.DIWSConsumer.<init>(DIWSConsumer.java:45)
        at com.endeca.clover.adapters.merge.MergeRecordsConsumer.<init>(MergeRecordsConsumer.java:51)
        at com.endeca.clover.adapters.merge.UpsertRecordsConsumer.<init>(UpsertRecordsConsumer.java:36)
        at com.endeca.clover.adapters.merge.MergeRecordsAdapter.getConsumer(MergeRecordsAdapter.java:110)
        at com.endeca.clover.adapters.DIWSAdapter.createConsumerThreads(DIWSAdapter.java:56)
        at com.endeca.clover.adapters.BaseAdapter.preExecute(BaseAdapter.java:146)
        ... 4 more
Caused by: org.apache.axis2.AxisFault: Could not find server for data domain
        at org.apache.axis2.util.Utils.getInboundFaultFromMessageContext(Utils.java:446)
        at org.apache.axis2.description.OutInAxisOperationClient.handleResponse(OutInAxisOperation.java:371)
        at org.apache.axis2.description.OutInAxisOperationClient.send(OutInAxisOperation.java:417)
        at org.apache.axis2.description.OutInAxisOperationClient.executeImpl(OutInAxisOperation.java:229)
        at org.apache.axis2.client.OperationClient.execute(OperationClient.java:165)
        at com.endeca.dataingest.axis2.ingest.IngestStub.ingestChanges(IngestStub.java:791)
        at com.endeca.clover.adapters.DIWSConsumer.initIngestStub(DIWSConsumer.java:88)
        ... 10 more
Kindly request your help in resolving this error.

Ecently, i intended to download but unfortunately it's already more than 5 attempts. Due to the slow connection and power failure, my download failed to complete. Would it be possible to download the application again? Regards

Recently, i intended to download but unfortunately it's already more
than 5 attempts. Due to the slow connection and power failure, my
download failed to complete.
Would it be possible to download the application again?
Regards

Which application does this concern? Alternative downloads are available thru the following pages...
Download and Installation Help -
https://helpx.adobe.com/download-install.html
You can also download trial versions of software thru the site linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
http://prodesigntools.com/tag/ddl

The Adobe Updater fails everytime due to our corporate fire wall.

The Adobe Updater fails every time due to our corporate fire wall. Is there a work around? It completes about 80% then can't see the internet. I suspect it is trying to talk to an FTP site which are blocked by our firewall.
Is there a work-around?
Paul

I am using Windows 7. I went to the "Installers" folder & there is a log file for every update except the Camera Raw update. I don't think it gets far enough to create the file. I was watching the folder & I tried to install this last patch again. I starts out saying it's downloading then aborts. No file is created. The files that are in the folder are:
Adobe Dreamweaver CS5.5 11.5.2 08-27-2012.log.gz
Adobe Extension Manager CS5.5 5.5.1 08-27-2012.log.gz
Adobe Flash Builder 4.5 4.5.1 08-27-2012.log.gz
Adobe Flash Pro CS5.5 11.5.1 08-27-2012.log.gz
Adobe Media Encoder CS5.5 X64 5.5.1 08-27-2012.log.gz
AIR for Apple iOS support (FB) 2.6.1 08-27-2012.log.gz
Creative Suite 5.5 Web Premium 5.5 06-19-2012.log.gz
Ordinarily I would just ignore this failure but I actually use Camera Raw for my Nikon D90 and Nikon D7000.

Setup tables ,load failed . Please help !!!

Hi, I have newly created a setup for sd infocube and have completed 5 delta loads from BI. But now my 6th delta load fails, and the data in my cube is lost. I have a queued delta setup .So now
1) delete the init flag.
2) delete all the setup table data with LBWG.
3) FILL the setup tables again OLI7BW newly.
4) Now if i do a full upload so will i get all my previous data ( all data till my 5th delta load)
5) by doing a full upload will my 6th delta load also be included in the setup tables, since im refilling the setup tables.
What should I do if its an ODS , is it the same case for ODS also ?

Hi.......
Are u sure data is lost.......hav u repeated the failed load.........look if u delete the failed request from the target after making the QM status forcefully red in the IP Monitor>> Status tab..........then the init pointer will set back........after that if u repeat the load...........then the system will ask u for Repeat delta...........means that it will pick all the missed records.........that were not loaded due to the failed load........
Now if u hav deleted the failed load without making the QM status red..........but have'nt repeated the load.........then nothing to worry about..............just make the QM status forcefully red........then repeat the load..............system will ask u for repeat delta................but if u hav deleted the request without making the QM status red......and also hav repeated the load..............then ur delta mechanism will get corrupted and data will be lost.........
In that case......
1)) delete the init flag.
2) delete all the setup table data with LBWG.
3) FILL the setup tables again OLI7BW newly........with selection...........to get the lost records....
4) After that either do full upload......followed by init without data transfer.................or simply do init with data transfer........it will pick records.as well as set the init pointer...........in that case........no need to do full upload......
In case of ODS............never do full upload.........bcoz an ODS does'nt support full upload and delta upload parrallely.......then ur ODS activation will fail............in this case instead of full upload..........u hav to do full repair........same thing.........just go to IP scheduler >> Scheduler tab >> Repair full request>>check the box.............then go ahead.......as u do in case of full upload...........schedule the load..................if u do full upload....then again u hav to convert the full upload request to full repair request....using the program :RSSM_SET_REPAIR_FULL_FLAG .......
Hope this helps......
Regards,
Debjani....

Applet loading Failed .... for diagnostics-console-extension.jar

Hi everybody,
i downloaded diagnostics-console-extension.jar from bea site. i copied this file to D:\bea9.0\user_projects\domains\mydomain\console-ext. i started weblogic server . in administration console when i clicking WLDF console extension tab it gives the Applet loading failed....and also in server console it gives an exaception as follows ""
java.lang.ClassNotFoundException: jsp_servlet._com._bea._diagnostics._dashboard.
__chartpanelapplet_class.
at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubI
mpl.java:512)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.jav
a:224)
at weblogic.servlet.internal.ServletStubImpl.onAddToMapException(Servlet
StubImpl.java:383)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.jav
a:298)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.jav
a:165)
Truncated. see log file for complete stacktrace
>
in Java console output Exception
Java Plug-in 1.5.0_06
Using JRE version 1.5.0_06 Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\mselvan
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
o: trigger logging
p: reload proxy configuration
q: hide console
r: reload policy configuration
s: dump system and deployment properties
t: dump thread list
v: dump thread stack
x: clear classloader cache
0-5: set trace level to <n>
java.lang.ClassFormatError: Truncated class file
     at java.lang.ClassLoader.defineClass1(Native Method)
     at java.lang.ClassLoader.defineClass(Unknown Source)
     at java.security.SecureClassLoader.defineClass(Unknown Source)
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Exception in thread "Thread-5" java.lang.NullPointerException
     at sun.plugin.util.GrayBoxPainter.showLoadingError(Unknown Source)
     at sun.plugin.AppletViewer.showAppletException(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
java.lang.NullPointerException
     at sun.plugin.util.GrayBoxPainter.showLoadingError(Unknown Source)
     at sun.plugin.AppletViewer.showAppletStatus(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Exception in thread "thread applet-com.bea.diagnostics.dashboard.ChartPanelApplet.class" java.lang.NullPointerException
     at sun.plugin.util.GrayBoxPainter.showLoadingError(Unknown Source)
     at sun.plugin.AppletViewer.showAppletException(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
so kindly any one help for the same.please help me
Thanks & regards
Selvan.M

Several issues with the diagnostic console extension have been fixed in WLS 9.2. Can you try the extension from 9.2? WLS 9.2 is now ready for download from the BEA site.
Thanks

Adobe loader fails to complete

Similar Messages

Maybe you are looking for