Adobe loading problems...what to do?

Just downloaded a free trail version of Adobe CS.5 and it took almost about three and half hours,now it says it's extracting amy take awhile.It's been awhile since I've used adobe what exacting is it doing.

Quote
Originally posted by tipsified_jl
just like everyone else ( most of em ), my 6800 ultra.. is super slow.. what should i do ? should i return to the retailer ( Corbell ) and seek assistance ? i thought it would be a good buy.. but it really disappointed me
What happened with your card?did you get a new one??just wondering cos i got a 6800gt recently and it performs the same as that diagram on the box.12,117 standard and 13,100 overclocked to the commander setting.
your score is awefully low for an ultra.Was just curious about what happened with that card

Similar Messages

I am having problem to down load adobe 10.1 what should i do

i am having problem to down load adobe 10.1 what shold i do?

You can start by telling us a lot more detail about where and how you are trying to download Reader and exactly what happens.

Adobe Captivate 8 projects published to HTML 5 shows major loading problems and stops

Adobe Captivate 8 projects published to HTML 5 cause major loading problems in most browsers(IE 11, Chrome v. 35.0, Firefox v. 31). Loading… (screen)
The view stops after a while and only the Loading… (icon) can be seen on the page.
Is this a known problem with Captivate projects published to html5 and is there a way to fix it? What is wrong?
Test the html5 version of this project at: http://kurs.dokker.no/captivate/
and see for yourself what happends.

I changed the Preferences/Project/Start and End Preloader % to 25 and published the projects again. The course: http://kurs.dokker.no/captivate/elev/
stopped like before on one of the first slides, loading… screen like before in IE11.
In Chrome v. 37.0 the course worked badly, would not run, sound missing and buttons not working.
In Firefox 31.0 the course worked to a degree even if the program was advising to use another browser for this content.
In Opera 23.0 sound was missing and else working as bad as IE.
All this testes is done on a PC using Windows 8 connected på internet via ethernet, download speed: 66.57.
I would like to use the HTML5-format since it has a cleaner view than swf-files that appear to be jagged, but there is a lot missing before Adobe Captivates html5 publish is where it needs to be. Her are the complete html5 course and here are the swf based course for comparison.

When i open my itunes store, it says secure link to itunes failed and it doesnt load up, what seems to be the problem here? appreciate all the help i can get, thanks! :)

When i open my itunes store, it says secure link to itunes failed and it doesnt load up, what seems to be the problem here? appreciate all the help i can get, thanks!

Yes, provided all the media is inside the iTunes Media folder, which is in turn inside the main iTunes folder (which is the standard arrangement) you should be able to move the iTunes folder from <User's Music> to any other path and shift-start-Tunes (option-start-iTunes on a Mac) to reconnect to it.
If the media folder has split out to another drive in the past, or media is stored outside of the iTunes Media folder, then things get a bit more complicated. I can go into details should it be necessary.
tt2

Certain web pages will not load and itunes and the appstore wont load either, what could be a probable cause and solution to this problem?

certain web pages will not load and itunes and the appstore wont load either, what could be a probable cause and solution to this problem?

the router is a netgear wireless extreme for pc and mac

PC does not recognize second Sony Reader PRS-T3. Adobe ID problem or what?

I have bought TWO e-readers, Sony PRS-T3 yesterday. The first one was no problem, after getting an Adobe ID etc, to connect to my PC (Win 7 Ultimate) and recognized by Sony's PC software "Reader for PC". But the second reader, same model, does not get connected to the PC at all. I checked on a second PC, AND both devices were recognized on it. So there is no problem to get connected when there is no Sony software installed and no Adobe ID registered at login on that computer. Is this an Adobe ID problem? And how can I solve it?

Hi Daniel,
What is the make of the printer and is it using PCL or PS driver.?
Do you have Acrobat installed on this machine as well?
Please check if 'Print Spooler' service is running on the machine.
Regards,
Rave

Plugin Load problem with photoshop CS4

Hi all,
i want to migrate my filter plugin from 32bit to 64bit environment in
adobe photoshop CS4.
Firstly i have tried to build one sample filter plugin(Dissolve). i have
build it sucessfully and placed the plugin inside the Filter subfolder of
plugin folder.
when i run the photoshop CS4(64 bit)the sample plugin is not been showing
in the filter plugin list.
I have looked into the system info regarding the loaded plugins., but i
haven not find the dissolve plugin name over there.
i have not even get any error message regarding the plugin load.
What will be the reason for this, Can anybody help me out in this..
Any type of help is highly appreciated.. If anybody has any confusion in
understanding my problem .. please revert me back..
Regards
Hemant

Check your PiPL for something like this:
#if MSWindows
#if defined(_WIN64)
CodeWin64X86 { "U3D_ENTRY" },
#else
CodeWin32X86 { "U3D_ENTRY" },
#endif
#endif

Flash to Flex movieclip single frame loaded problem

Hi all,
I have exported a small movieclip (which has 10 frames consisting of a classical rotation animation) as swc from Adobe Flash CS4. I did this from the Library panel by setting the properties as:
- Export for ActionScript 3 (Class name given)
- Export for frame 1 (Deselected)
Afterwards I copied this component to Adobe Flex (Flash Builder 4 Beta 2) libs directory. I then created an instance of the movie clip in Flex with the new keyword (var myMovieClip:MovieClip = new MyMovieClipClass()).
So far so good. The problem arises when I try to navigate between the frames with nextFrame() and gotoAndPlay() etc. The problem is that - only the first frame of the movieclip seems to be loaded - I found it out by checking :
if (myMovieClip.framesLoaded > 1) {
//then log this --BREAKPOINT
When I try to debug the application it never stops in this breakpoint. So, only one frame seems to be loaded.
What do you think the problem here is?Am I in the wrong direction for trying to navigate between frames of an exported swc movieclip?
Thanks in advance...

Ok, I solved the problem. The problem was in Flash I could not convert the animation to movieclip properly. I had designed the animation on the stage, so when I select the object and converted it, only the single graphics object is converted. I started with "create new movieclip" and designed the animation that way, the problem solved.
In the library pane, one should see the animation run when right clicking the component and selecting play option. Keep this in mind...

When i open pc an adobe bridge problem denotes purging

when i open computer an adobe bridge problem denotes purging

Are you trying to say that pointing to your computer in Bridge you get an error message telling you that you need to purge the central Cache?
If so, go ahead and purge it.
Your post is not clear at all. Try rephrasing it, please.
Also:
A lot more information about your hardware and software is needed.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
a screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

CS5 Design Premium Installation Adobe Bridge problem

When I try and install CS5 Design Premium it fails because it wants me to close Adobe Bridge (which is not open) and won't let me go any further. I tried uninstalling CS3 but it won't let me because it wants me to close Adobe Bridge.
What Now?

There shoult be a Bridge icon in the system tray (bottom right corner), close Bridge from here and run the uninstaller or if you don't find this icon you can kill process Bridge.exe but this is not always the best way to overcome a problem. I would recommend closing the application from system tray icon.
Thanks,
Tahseen

Flat-File Loading problem

Hi Friends,
I am struggling with flat-file loading problem. I am trying to load a .csv file into data target. I took all pre-cautions while loading data. I look into preview and simulate the data. Everything is ok, but when i schedule the data, i found 0 records in the monitor. The following is the STATUS message of the above problem:
   No data available
Diagnosis
The data request was a full update.
In this case, the corresponding table in the source system does not
contain any data.
System response
Info IDoc received with status 8.
Procedure
Check the data basis in the source system.
         Can anybody help me what is the problem and procdure to resolve it?
Regards,
Mahesh

Hi Eugene,
Thanks for the quick reply. The following screen-shot tells you the messages of detail tab;
OVER ALL STATUS MISSING WITH MESSAGES OR WARNINGS
REQUEST: MISSING MESSAGES
EXTRACTION
EVERYTHING IS OK
DATA REQUEST RECEIVED
NO DATA AVAILABLE DATA ELECTION ENDED.
PROCESSING
NO DATA
           The above message was shown in details tab. Pls guide me to locate the problem.
Regards,
Mahesh

App keeps loading problem solve

Anyone with an app still loading problem can get rid of it by going into the app store. tap on "updates"- bottem right corner. tap on purchased where you get a list of your downloads then tap on the cloud with the arrow, enter your pin. hit ok for app over 20mb. go back into the app store and to your purchased list and wait for it to reload. once done come out of the app store and hopefully all the loading apps are gone. hope it works for you.

I had this same problem when trying to download some training app. I could not delete or get it to upload completely either. Very frustrating. What I did was plug it into my computer, went to Itunes and searched the same app. I was able to download it here and then it starte to sync with my Iphone. You can remove the app after it finishes the download if u want. Hope this works!

PSE 12 trial version - loading problems

I have been trying for 3 days to load the 30 day trial of PSE12 on my new computer. My computer is loaded with Windows 8. I have encountered problems over and over again with loading PSE12, but never the same problem.
For example: after one download the start menu would open but it wouldn't go to the organizer or editor. So I deleted that program and re-loaded it BUT -
then , it went straight to the organizer - and froze, so I clicked out - tried to click back in, and NOTHING> >> not even the start menu.
THIS IS SOOO FRUSTRATING! Makes me really second guess whether I should purchase this or not
Please help!!!

I think it said error 101, but not totally sure that I recall it
correctly. I deleted everything and reinstalled and then it worked.
Haldis
In a message dated 12/31/2013 11:27:15 A.M. Pacific Standard Time,
[email protected] writes:
Re: PSE 12 trial version - loading problems
created by Jeff A Wright (http://forums.adobe.com/people/JeffAWright)
in Trial Download & Install - View the full discussion
(http://forums.adobe.com/message/5969733#5969733)

BB Z10 loading problem

Dear Sirs,
A couple of days ago the battery drained in the night & my phone got switched off. I tried to charge my phone in the morning but it would not switch on. Its stuck in loading & when I try to Hard reboot the phone goes off, then switches on & again gets stuck in the loading.
I read in one of the article that the phone finds difficult to charge its battery once it gets drained 100%. So I decided to charge the battery separately with a wall mount charger. I then again tried with a charged battery but the problem persisted.
I then decided to reinstall the OS even if that means I shall lose all my contacts. I have blackberry link in my laptop. I tried the option "Reload device software". I reset my device after pressing/holding power button for 10 sec.
After the red light & then entering the device pin the color turns green. I then get a prompt to get updated BB device software. clicked "get update" and it starts downloading/installing. Now comes the Error stating "There was an error updating your software, please try again later"
I downloaded BB device desktop software separately from the BB website & tried updating device software & repair device. I reset my device the software checks for updates. The green light is on & i try to install BB desktop software But the error msg comes again.
I had device overheating problem once like a month ago when the phone turned off after excessive heating. But all was fine since then.
Tell me what to do. what might be the problem. what is the solution. Please support.
Suhail

Hey rhorth,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
What version of BlackBerry 10 are you currently using? Go to Settings>About to get this information.
Also just to clarify, if you create a calendar entry with an email account attached does it save the appointment?
I look forward to your reply.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Adobe acrobat problem

Here is my problem what should i do

what should i do
You should launch Adobe Acrobat and accept the End User License Agreement.
If Acrobat is not installed, see below. Back up all data before proceeding.
Triple-click anywhere in the line of text below on this page to select it, the copy the selected text to the Clipboard by pressing the key combination command-C:
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens by pressing command-V, then press return.
From the folder that opens, move to the Trash any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari.

Adobe loading problems...what to do?

Similar Messages

Maybe you are looking for