Adobe media encoder cc has encountered an error

can anyone help me about some problems with adobe media encoder cc ??
adobe media encoder cc has encountered an error
command.cpp-3302
THIS IS NEW CRASH WHEN I TRY TO EXPORT MPEG2 VIDEO

FAQ: What information should I provide when asking a question on this forum?

Similar Messages

Adobe Media Encoder (CS5) has encountered an error (WinFile.cpp-759)

I have a 714 MB Xvid file that I want to split into smaller pieces. I have gone successfully through a similar process earlier with a larger Xvid file using the same version of Adobe Media Encoder (CS5). It appears that no matter which output video format I choose, the process crashes with the following error message shown in a new pop-up dialog:
"Adobe Media Encoder has encountered an error. [..\..\Src\Win\WinFile.cpp-759].
(Even the source program file line number 759 in the above error message is always the same, regardless of my chosen output file format.)
The only option available from this point onwards is the "Continue" button. When I click Continue the program terminates with the Windows program crash message "Adobe Media Encoder CS5 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. <Debug> / <Close program>"
My search for other similar problem reports revealed that some user(s) has/have experienced a very similar problem in CS4, but the source line number was slightly different in CS4. Both problems are probably caused by the same error in Adobe's software. The small difference in source line numbers is probably due to some (minor) and probably unrelated changes to this C++ source module (WinFile.cpp).
It might of course be the case that this particular input video file has some rare encoding or other embedded problem. However, the fact that I can view the video without problems using Windows Media Player does not support this theory.
Apart from this message board I could not find any other avenue to report this bug to Adobe (without paying for support - which I am obviously not going to do as this is clearly a programming bug in the software). Hopefully some Adobe developer responsible for Media Encoder maintenance will read this forum from time to time and would subsequently inspect the source module for any obvious defects. I could supply the source video file with which this problem can be reproduced at will.
Regards
Jouni Juntunen

CS4 Adobe Media Encoder & FMLE are two different softwares - you can post your query here:http://forums.adobe.com/community/ame

Bug report: Adobe Media Encoder (CS5) has encountered an error (WinFile.cpp-759)

I have a 714 MB Xvid file that I want to split into smaller pieces. I have gone successfully through a similar process earlier with a larger Xvid file using the same version of Adobe Media Encoder (CS5). It appears that no matter which output video format I choose, the process crashes with the following error message shown in a new pop-up dialog:
"Adobe Media Encoder has encountered an error. [..\..\Src\Win\WinFile.cpp-759].
(Even the source program file line number 759 in the above error message is always the same, regardless of my chosen output file format.)
The only option available from this point onwards is the "Continue" button. When I click Continue the program terminates with the Windows program crash message "Adobe Media Encoder CS5 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. <Debug> / <Close program>"
My search for other similar problem reports revealed that some user(s) has/have experienced a very similar problem in CS4, but the source line number was slightly different in CS4. Both problems are probably caused by the same error in Adobe's software. The small difference in source line numbers is probably due to some (minor) and probably unrelated changes to this C++ source module (WinFile.cpp).
It might of course be the case that this particular input video file has some rare encoding or other embedded problem. However, the fact that I can view the video without problems using Windows Media Player does not support this theory.
Apart from this message board I could not find any other avenue to report this bug to Adobe (without paying for support - which I am obviously not going to do as this is clearly a programming bug in the software). Hopefully some Adobe developer responsible for Media Encoder maintenance will read this forum from time to time and would subsequently inspect the source module for any obvious defects. I could supply the source video file with which this problem can be reproduced at will.
Regards
Jouni Juntunen

OK, I've reported the bug in the linked location. However, I had to use "Creative Suite" as the application, because "Adobe Media Encoder" was not an available option.
Jouni Juntunen

Adobe media encoder components have different versions error CS5 (32 bit)

I updated the CS5 suite the other day and all the updates installed fine, except adobe media encoder which said "done with errors" (no indication of what the errors were mind you).
Now, when I open Adobe Media Encoder (CS5) it pops up saying "Adobe Media Encoder components have different versions. Please update Adobe Media Encoder."
This is the 32 bit v of CS5 (so no Premiere or AE) but Adobe Media Encoder is still used to encode flv etc for the web (Flash and Dreamweaver).
The CS4 suite version of Adobe Media Encoder (that does have Premiere and AE) works the same as always. Has anyone else noticed this?

This was a problem with the installer.
We have updated and posted a new version to Adobe.com.
If you still get error on launch, you can download the new patch and install it to fix this issue:
1.       Go to http://www.adobe.com/support/downloads/detail.jsp?ftpID=4869
2.       Download the patch and save it on your Hard drive.
3.       Unzip the file.
After unzipping the file, you should end up with one installer and two folders:
4.       Dbl-click on “AdobePatchInstaller.exe”.
This will over write the previous 5.01 patch you installed with new one.
Since we didn't actually change the files inside the patch, but basically fixed the installer, this update has the same update number 5.0.1.
We have also updated the update manager and future automated updates won't have this issue.

Media Encoder Debug event - encountered an error

When I try to use system presets under several groups example DNcHD MXF OP1a, AVC INTRA or XDCAM EX, the same error message (Adobe Media Encoder has encountered an error. [..\..\src\Command.cpp-3302] appear. Many other preset work just fine but there are several that not.
My encoder version is 7.0.0.374 so it should be newest.
Sincerely
Sami

I'll tryed now everything. If I choose update it tells everything is up to date. If tryed to run patch from: "http://download.adobe.com/pub/adobe/mediaencoder/win/7.x/AdobeMediaEncoderTrial_64-7.0.1-m ul-AdobeUpdate.zip", it runs ok but nothing has updated when I start Media Encoder again.

"Adobe Media Core CS6 has stopped working" error.

I have had Premiere Elements 11, Photoshop Elements and LR 4 installed for over a year on my Windows 7 computer. Over the last couple months, within a few minutes of turning on my computer I get an error that Adobe Media Core CS6 has stopped working. It seems like this might be related to Premiere but I have not been able to find a solution. This occurs even if I have not run any of my installed programs. Any suggestions what is causing this and how to fix it?

I had not saved the detail files earlier today (it appears they disappear on a restart), but did a shutdown/startup a short time ago and had a recurrence again. (Although two subsequent cycles did not generate the error.) I saved the files and the .xml file indicates the parent process was Elements 11 Organizer this time, not LR4.
I had been living with this problem for a while, one of the set of saved error file sets was from 5/1. I don't recall for sure if that was from the first occurrence of the error, but I decided to look for other programs installed just before that time. I see that Adobe Creative Cloud was installed the day before, 4/30. I don't recall how/why that was installed since I don't have any Cloud products. Also installed on 4/30 were three Microsoft Visual C++ Redistributable files, which show installation times one minute before the Creative Cloud installation, so I assume they are part of the Cloud installation. The next most recent (before 5/1) installed program was Smith Micro Anime Studio Pro 9.5, which was installed on 4/29.
The firewall settings have not changed. I was in a chat with my ISP when the problem occurred this afternoon, but not during the latest occurrence. I don't recall any updates since 6/24. I believe the error had occurred every time I started my computer before the Firewall changes, but it seems to be more sporadic now.
I will see what else I can come up with tomorrow since it is getting late. I wanted to get this all down before I lost my thoughts.
Update 7/5:
I have more information, but still no solution.
I found this thread Adobe Media Core CS6 has stopped working related to the same error, but it had no solution. The error did not occur when I exited PS Elements or Premiere Elements as it did for that person.
I also found Adobe media core cs6 stopped working......??? and tried the steps to rebuild the Photoshop Elements editor preferences file, but no success.
I had noticed that Adobe Creative Cloud was installed the day before, so I uninstalled it. Error still occurred.
I installed a different firewall (Zone Alarm Free) and disabled Windows Defender, error still occurs.
Uninstalled Anime Studio Pro (that had been installed a couple days before, error still occurred.
I will provide more updates as I try more changes.
Update 7/20:
More things I tried:
Repaired quicktime via control panel, did not fix
Uninstalled quicktime, error did not recur
I noticed that there remained a plug-ins folder in the quicktime folder, so I renamed it.
Reinstalled quicktime from Apple site on 7/12 and the CS6 error has not recurred.
Additional info not directly related to original question, but occurred afterwards.
I don't think it is related, but a few days later started getting a small blank MFC CTxfiHlp window upon windows startup. I haven't resolved that yet, but it is related to my Creative XFi sound card.
I also noted when I reinstalled Anime Studio Pro that the readme contains a warning that 64 bit windows does not support quicktime; that I should use the 32 bit version of their software.
I installed the latest Creative sound card software, but started getting lockups. Still working on this, but the original problem seems to be solved.
The only other thing I can think of is that iTunes software had been installed, but I removed it. It is possible that caused a problem with quicktime??
Anyway, the removal of quicktime (including the Plug Ins) and re-install did resolve my problem.

Adobe Media Encoder Crashes when launched

Hello, friends on the forum!
I am using a PC with a Windows XP (Home Edition) o/s. It has an Intel Pentium 4 cpu @ 2.80 GHz and 2.5 gb or RAM. This problem just developed: when I try to export a CS4 project, AME hangs and crashes. I then get a message saying "Adobe Media Encoder CS4 has encountered a problem and needs to close.....yadda, yadda, yadda!" It then, by itself, tries to launch again with the same dismal result. Any suggestions as to how I might fix this? Many thanks in advance!
Lewis Beck

Work through all of the steps (ideas) listed at http://ppro.wikia.com/wiki/Troubleshooting
If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section, the questions at the end of the troubleshooting link... most especially the codec used... see Question 1

Adobe media encoder export error "writer not found"

When trying to export to wmv using adobe media encoder I get an export error of "writer not found". I did a search and found others having the same issue with no fix as far as I can see. Just wondering if anyone has any more iformation on this. I'm using Vista Ultimate and Premiere CS3.
Thanks

I registered the WMEncoderHelper.exe file with regserv, but I still get
the "writer not found error". I wish I knew what codec it is trying to find and use.

Adobe Media Encoder CS5 - 5.0.1 update

When I try to update AME CS5 using Adobe Updater, I get this error message:
The following updates were unable to install. If you wish to install these updates, please fix the problems below and retry:
Adobe Media Encoder CS5 5.0.1
Adobe Media Encoder CS5 has been moved or deleted improperly. Please launch or reinstall the application to update the location and try again. To remove the product from the system, please uninstall product using the aliases under "/Applications/Utilities/Adobe Installers"
A few problems with this - there isn’t an AME uninstaller alias. Also there isn't an installer on the retail DVD, so I wouldn't be able to reinstall anyway. This is further complicated by the fact that the 5.0.1 update is not available online for download. Maybe I'm missing something here, and this is just a stupid mistake on my part.
I have launched and used AME as well as checking that it is installed correctly (correct location) in my current configuration – still no luck with the auto update.
Is there a way to tell Adobe (or Adobe Updater) the location of AME, so this install will complete successfully?
Has anybody else seen this issue?
Has anybody else resolved this issue?
Any help is appreciated -
Jeremiah
System Config:
MacBook Pro 5,1 (15-in, late 2008)
OS 10.6.4
2.53 GHz Core 2 Duo
4GB 1067 MHz DDR3 RAM
NVIDIA GeForce 9600M GT 512 MB (and GeForce 9400M 256 MB)
Adobe CS5 Master Collection (all current release except AME)
AME 5.0.0.402 (64bit)

I did install the Adobe Support Advisor before posting. ASA was a little quirky on the Mac as well, but I finally got it to work; however, it reported no issues. Thanks for the suggestion though.
What I ended up doing was moving the AME directory to the root level on the system - and then back to it's original location in the Applications folder (same location it has been in). This must have updated something on the OS side because once I ran the updater again - all updates installed successfully.
I'm not sure how the issue came about, but it appears that the OS or Adobe had some incorrect information in a config or installer log file somewhere and by moving the folder out and then back it was resolved/updated.
thanks -
j

Adobe Media Encoder Unexpectedly Quits

Hello,
I was trying to export a flv file from CS4 today and I have been receiving an error Adobe has detected that the application adobe media encoder CS4 has Unexpectedly quit. I?m using CS4 4.1 and the matrox 4.1 beta build.
Here are our settings:
This was originally a CS3 project now opened in CS4. The source footage is 720p, 29.97fps, m2t files
I was exporting them with the adobe media encoder
Flv F4v
Using no filters
Format Flv
Video
On2 VP6 Codec
Not encoding the alpha channel
Resize to 640X360 (half size)
Frame rate: same as source
CBR one pass 500kbps
Set key frame 150
Undershoot target 90% (this is new to me I left it at the default but what does this mean?)
And Simple Profile is not checked (This is new to me I left it at the default but what does this mean?)
Quality: high
Audio
Stereo 64kbps
I tried making a wav file and a F4V and neither of those caused Adobe Media encoder to shut down. But as soon as I try making a flv using these settings the encoder opens then comes up with this error. I would think it has something to do with my settings maybe I need to change something. What should I do and what is a F4V file??
Thanks

Updates. This is becoming an emergency, I can't seem to export anything from any projects!
Has anyone out there updated their adobe media encoders? Whenever I go to file export I get a dialogue that says there is a update available. My editing system has not been connected to the internet so I have not tried updating yet.
We are using the Adobe 4.1 and Matrox utils 4.1beta.
we are using a Matrox Axio LE system.
In other tests I tried exporting from a 720p 59.94 project using m2ts and a 720x486 29.97fps SD project where the source file was a uncompressed AVI but both were unsuccessful.
I can however open up the adobe media encoder if I chose F4V upon export. When I choose FLV the encoder opens then quits. With F4V the encoder actually opens but when I select start queue the encoder just sits there and does nothing.
I have also just tried another test exporting from 720p 59.94pfs 1.0 PAR. to M2V which didn't work.
The encoder actually opens this time but when I start encoding the encoder just sits there. I can see that it starts to create a file in the specified destination but never really gets going.
I was using these settings: export Audio and Video, no multiplexing,
720x480 Quality 5 (all the way up, Progressive frames,
4:3
Audio 16bit 48khz,
no filters
M frames 3
Gop 15

WMV Won't Import in Adobe Media Encoder CS5

Have several WMV files known to be good (they playback fine in Windows Media Player etc.) but when i try to import any into Adobe Media Encoder CS5 it quickly reports "Error Compiling Movie Unknown Error"
I'm running Windows 7 version of AME. Anyone know a work around? I need to encode these to FLV so they can be easily viewed by most web browsers.

The above links are outdated since in 2010 the only encoder now provided by Microsoft is Expression Encoder 4, and the free version only exports VC-1 files. If you pay $49 to buy Expression Encoder 4 Pro it will convert WMV to H.264 which is natively supported in IE9. Microsoft Expression Encoder doesn't output to Flash. More info at http://www.microsoft.com/expression/products/EncoderPro_Overview.aspx

Adobe Media Encoder CS4 problem with watchfolder.dll

When i loading Adobe Media Encoder CS4, i have this error and application crash:
Problem signature:
Problem Event Name: APPCRASH
Application Name: Adobe Media Encoder.exe
Application Version: 4.0.0.0
Application Timestamp: 48b3250d
Fault Module Name: WatchFolder.dll
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 48b32139
Exception Code: c0000005
Exception Offset: 00008a83
OS Version: 6.0.6001.2.1.0.256.1
Locale ID: 1049
Additional Information 1: fd00
Additional Information 2: ea6f5fe8924aaa756324d57f87834160
Additional Information 3: fd00
Additional Information 4: ea6f5fe8924aaa756324d57f87834160
Read our privacy statement:
http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409
OS Version: Windows Vista Ultimate SP1
Processor: Core 2 Quadro 2,66 Ghz
Memory: 4GB

These directions are specifically for windows 7 x64
It may be hidden since it's a system folder. You can get to it one of two ways.
Either: Hit start button + r to get run, then insert (C:\Users\Administrator\AppData\Roaming\Adobe\Adobe Media Encoder\4.0\) without the () and press enter. *This is assuming that your username is Administrator. If the folder exists it will take you there, even if it is hidden.
Other way: hit start button on keyboard and type in "folder options". Press enter when it shows up in the start menu search. Click on the View tab then select "Show hidden files, folders, or drives" and uncheck "Hide protected operating system files". This should enable you to see both the AppData and Roaming folder. You may want to undo these selections otherwise you'll see files you usually don't want to see. (thumbnail caches...)
If neither of these methods work, let me know which folders you see in this directory "C:\Users", Administrator may not the account you're currently running on.

Adobe Media Encoder CS4

Adobe Media Encoder CS4 has one Filter ... Blur , is it
possible to add another and are there any available, specifically
for adjusting gamma.
Thanks

Georges, please provide
these details to help us help you.
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

Adobe Media Encoder won't run

I can't seem to run my version of Adobe Media Encoder. I get an error which says C:\Program Files\Adobe\Adobe Media Encoder\ CC\MediaCoreUI.dll is either not designed to run on Windows or it contains an error. I have installed the latest update of this product but it still doesn't work. Is there any way of uninstalling it and reinstalling it or do I have to uninstall After Effects and start again?

We need more information to help you. Please answer all of the questions here:
http://forums.adobe.com/thread/1011883

Feature Request for Adobe Media Encoder??

Hi,
Why isn't there an option to make a feature request for 'Adobe Media Encoder' on the Adobe Feature Request page??? (Adobe Media Encoder isn't on the list of software)

Adobe Media Encoder now has its own entry in the feature-request and bug-report form:
http://www.adobe.com/go/wish

Adobe media encoder cc has encountered an error

Similar Messages

Maybe you are looking for