Adobe Media Encoder Dynamic Link Server NOT CONNECTING to Premiere Pro

I have Media Encoder CS5, as part of the Creative Suite 5. My programs say that I have no updates to install, so everything is up to date.
I am having an issue with the dynamic link server.
Here's what has happened thus far.
Recently when I have tried to encode a project sequence from Adobe Premiere Pro it DOES NOT work. This is the first time that has happened.
I repeated the process and again, it still happened, unable to connect to the Dynamic Link.
The Error messages that I was getting was "could not read from source. Check if it has been moved or been deleted"
Once, I received this, I went to check to see if all files were linked properly, and they were. Everything was rendered and all was good in the timeline and the project itself.
Yet, again, the error message appeared.
Then I tested a previous project that I knew had been exported and worked through Adobe to Media Encoder. And all the files were linked properly and yet again received the error message I wrote above.
Then I thought the Dynamic Link itself wasn't working properly, so I tested importing an Adobe After Effects Comp into a Premiere Timeline and it DID WORK.
Then I went and tested if a video file of an already exported project would be able to sync to Media Encoder. And this WORKED.
I then went to add the file directly from Media Encoder and when I went to add a sequence from a saved Premeire File, it would take about 5 minutes "Connecting to Dynamic Link Server", to then state, "Connecting to Dynamic Link Server Failed"
My question is, how do I fix the dynamic link between Media Encoder and Premiere? Because, additionally, importing and After Effects Sequence works with Media Encoder.

I've been searching/troubleshooting for days, none of the firewall, new shortcuts in folder, antivirus, you name it I tried it even wiped my system which seemed to work at first..
What did it for me in the end was I had Dxtory (a software recorder, for recording gameplay) running on startup, and somehow it interfered with only Premiere projects in Media Encoder, I could still import AE projects go figure.
Check all the programs you have running or use sometimes, if they have some sort of hook into other programs/deal with video/codecs this could be your problem too!
Thanks to everyone trying to solve this problem!
-JonOfAllGames

Similar Messages

  • Media Encoder & Dynamic Link Server Failed

    I want to set up a few sequences from Premiere into the Media Encoder to render overnight. Yet, everytime I try and put a sequence into the Media Encoder it just sits and the "Connecting to Dynamic Link Server..." for a few minutes until finally "Dynamic Link Server Failed" pops up.
    Anyone know how I can fix this?
    Thanks!

    I've been searching/troubleshooting for days, none of the firewall, new shortcuts in folder, antivirus, you name it I tried it even wiped my system which seemed to work at first..
    What did it for me in the end was I had Dxtory (a software recorder, for recording gameplay) running on startup, and somehow it interfered with only Premiere projects in Media Encoder, I could still import AE projects go figure.
    Check all the programs you have running or use sometimes, if they have some sort of hook into other programs/deal with video/codecs this could be your problem too!
    Thanks to everyone trying to solve this problem!
    -JonOfAllGames

  • Both After Effects & Adobe Media Encode CC giving are not letting me export.

    Dear All,
    Both After Effects & Adobe Media Encode CC giving are not letting me export movies.
    Some times they will, but after one file both programs give me the following error messages.
    After effects:
    “[file path and name].mov. An output module failed. The file may be damaged or corrupted. (-1610153464)"
    AME:
    "Can't read from source."
    I've went through the forum and found threads & pages discussing the problem.
    E.g.
    http://blogs.adobe.com/aftereffects/2013/08/solutions-for-problems-with-quicktime-files-in -after-effects-cc-12-0-because-of-conflict-with-dvcprohdvideoout-quicktime-component.html
    http://forums.adobe.com/thread/1252092
    After following all the tips and suggestions (from deinstalling quicktime components & audio components to completely reinstalling CC) I'm still experiencing the problems.
    Which leaves me in a bit of a squeeze. I need to export over 144 movies in the coming 2 days and the only way to do this is to quit and open media encoder (or AE) after each single export.
    Not really an option.
    Both problems have the process Adobe QT sever in common, I took this from the console:
    9/26/13 1:02:44.517 PM com.apple.launchd.peruser.501[171]: ([0x0-0x42042].com.adobe.Adobe QT32 Server.application[331]) Job appears to have crashed: Segmentation fault: 11
    9/26/13 1:02:44.672 PM ReportCrash[354]: Saved crash report for Adobe QT32 Server[331] version 7.0.1 (7.0.1.0) to /Users/martijn/Library/Logs/DiagnosticReports/Adobe QT32 Server_2013-09-26-130244_martijns-MacBook-Pro-2.crash
    System information:
    Retina MacBook Pro (Mid 2012) (16gb ram)
    Mac OS X 10.8.5 (12F37)
    Running Adobe CC (for teams), all apps are up-to-date.
    I don't no why Adobe puts out such a buggy piece of software (I know it has to with Apple's poor 32bit quicktime implimentation, but hey, this was known information no?).
    Upgrading to CC has given our office nothing but problems.
    Hope someone can help to find a work around until Adobe realeases a proper update and solves this problem once and for all.
    All help is much appreciated.
    Kind regards,
    Martijn

    Hello Tim,
    Thanks for the really quick response!
    Regarding the crash log: it doesn't reference com.apple.audio.CoreAudio (though it did before, so I followed all the steps in your blog post before I posted to this forum).
    I've uploaded the crashlog to:
    http://martijnlambada.com/TMP/AdobeQT32servercrash.zip
    If you want to inspect it. It mentions the DXV codec (which I also uninstalled), but the crash keeps occuring. Also I need to export to DXV since it's the only codec the d3 media
    server accepts (http://d3technologies.com).
    I followed all the steps in the troubleshooting steps.
    Codecs used: I've tried everything from animation to Apple ProRes (including: h264/motion jpeg/uncompressed). With all codecs the Adobe QT32 server keeps crashing (though I can't always reproduce).
    Export destination: Internal SSD (same as where the OS is installed on) + External raid (via firewire & thunderbolt) + external HD via usb 3.0 (tried everything).
    When does the problem start: Really hard to specify, sometimes a day without crashes, sometimes every export for days on end. Sometime after restarting (tried logging out, restarting, switching off and on the computer). With other programs running and with out. Now checking every process active when exporting, and comparing log files.
    Can you export to other formats: See question 1, sometimes I can, sometimes not.
    When you launch AE and/or AME, is QT32 Server running? At what point does it stop running?  Still runing when I open the program. It crashes when exporting (ofter after finishing the first export).
    What component files are in your Library/QuickTime folder?: Currently the folowing:
    AppleAVCIntraCodec
    AppleHDVCodec.component
    AppleIntermediateCodec.component
    AppleMPEG2Codec.component
    AppleProResCodec.component
    DesktopVideoOut.component
    DVCPROHDCodec.component
    DVCPROHDMuxer.component
    DVCPROHDVideoDigitizer.component
    DVCPROHDVideoOutput.component
    DVCPROHDVideoOutputClock.component
    FCP Uncompressed 422.component
    iChatTheaterPreview.component
    IMXCodec.component
    LiveType.component
    Hope this helps.
    Cheers,
    Martijn

  • Adobe Media Encoder CC renders do not reflect changes to Dynamically Linked After Effects Comps

    When rendering a Premiere timeline with a dynamically linked After Effects composition, Adobe Media Encoder will sometimes use an older version of the linked composition (even after I have saved changes in the After Effects comp).
    For example, if I correct a spelling mistake on some text in After Effects, save the composition, and then add the sequence to the render queue in Premiere, the final output from media encoder still has the old spelling.
    If I do a straight export from Premiere instead of adding to render queue, the output is always correct. I've noticed this problem on several different Windows 8.1 systems.
    All versions of the software are up to date as of today.
    Why is this? Is it something to do with the disk cache in After Effects? Does media encoder have it's own cache that I need to clear?

    Hi, I've been having this same issue.  Here are some additional things I've noticed about it:
    Changes are reflected properly when played back on timeline in Pr CC 2014.
    Happens regardless if the dynamic link file was rendered or not, thus deleting the render files does not fix the issue.
    The issue can persist through saving, closing, and reopening both AE and Pr. 
    I'm using OSX 10.9.4, so this is not just a PC issue.
    Other than manually watching for every change to be reflected in the render, there is no way to know a problem has occurred.  Needless to say this can be incredibly costly.
    Please address this quickly, it's completely unacceptable that what we render out could be a different version from what we see on the timeline.
    PS Some additional things I will be testing:
    Does the issue persist through closing all CC apps, including Media Encoder.
    Does rendering directly out of Pr, i.e. not using Media Encoder, fix the issue.

  • Media Encoder Dynamic Link error 5027 :: 12  ????

    While trying to send a file to media encoder from after effects in order to render in a file format not located within ae i was given an error message that my adobe media encoder was not installed 5027 :: 12 dynamic link server failed . When i launch media encoder by itself it launches fine. Any help appreciated

    open ame and add your file to the ame queue.

  • Adobe media encoder export error  "writer not found"

    When trying to export to wmv using adobe media encoder I get an export error of "writer not found". I did a search and found others having the same issue with no fix as far as I can see. Just wondering if anyone has any more iformation on this. I'm using Vista Ultimate and Premiere CS3.
    Thanks

    I registered the WMEncoderHelper.exe file with regserv, but I still get
    the "writer not found error". I wish I knew what codec it is trying to find and use.

  • Adobe Media Encoder CS5.5 does not preview video in Lion 10.7.3

    In response to a question in the Adobe Forums about this [ http://forums.adobe.com/message/4302817#4302817 ], Adobe said:
    Apple changed something in 10.7.3 and we thought we worked with them to find all the fall out.  This one slipped through.  We will work with Apple to determine how we can address this.
    Are there any updates on when this will be fixed? Not being able to preview video in AME5.5/MacOS 10.7.3 is a serious bug. I have to go back to an earlier version of AME on a Windows machine to encode FLVs.
    Adobe Media Encoder CS 5.5.1.12 (64-bit)
    Mac Lion 10.7.3

    I have the same problem since I update my mac book pro Mac Lion 10.7.3
    Adobe Media Encoder CS5.5 doesn't have a preview

  • AME Adobe Media Encoder Cuda GPU Acceleration not activated, How do I activate it

    Mac Pro Early 2009 4.1, Processor  2.93 GHz Quad-Core Intel Xeon, Memory  16 GB 1066 MHz DDR3 ECC, Graphics  NVIDIA GeForce GTX 680 2048 MB, Software  OS X 10.9.2 (13C64)
    Adobe CS6 suite up to date all programs as of 3-18-14
    NVidia Cuda Driver 5.5.47 installed, Open CL and GL capable
    I read this article http://blogs.adobe.com/kevinmonahan/2013/09/13/enabling-cuda-for-the-mercury-playback-engi ne-in-the-macbook-pro-retina/. it shows GPU acceleration through AME (see below). In my AME que window I do not see this

    Todd:
    (edit)
    Just reread - sorry, CS6 vs CC.
    What about AME CC?
    http://blogs.adobe.com/kevinmonahan/2013/09/13/enabling-cuda-for-the-m ercury-playback-engine-in-the-macbook-pro-retina/
    So, CUDA acceleration in AME and OpenCL is supported.  Anyway to monitor this?  I get FAILED when I try either (on a box with nVidia, or a box with AMD).
    Found this:  http://helpx.adobe.com/media-encoder/using/whats-new-media-encoder-7-1.html#gpu-accelerati on
    GPU acceleration
    Adobe Media Encoder now takes advantage of GPU for rendering purposes. Both CUDA and OpenCL are supported. The latest release of AME uses the GPU for the following renders:
    Scaling (HD to SD; SD to HD)
    Timecode filter
    Pixel format conversions
    Deinterlacing
    Aspect ratio changes
    All effects in the Effects tab
    GPU accelerated effects in Premiere Pro
    If you are rendering a Premiere Pro sequence, Adobe Media Encoder will use the GPU render preference you have set for the project. All GPU rendering capabilities of Premiere Pro are utilized.The limited set of GPU renderable tasks in Adobe Media Encoder is only for renders that originate in Adobe Media Encoder.
    If you are rendering a sequence with native sequence support, the GPU setting in AME is used and the project setting is ignored. In this case, all GPU rendering capabilities of Premiere Pro are utilized directly in AME.
    If your project uses 3rd party VSTs (Virtual Studio plugins), the GPU setting in the project is used. The sequence is encoded through headless Premiere Pro just as in earlier versions of Adobe Media Encoder. If Enable Native Premiere Pro Sequence Import option is unchecked, headless Premiere Pro will always be used and the GPU setting is used.

  • Adobe After Effect Dynamic Link Server is busy. Dynamic Link is only supported in one direction per

    Okay, I've just about had it with CS!@#$4....I am getting the above message every time I try to import an after effects compostions.  Yes, I did upgrade to windows 7 not to long ago but I have already built a composition and even imported into into Premiere Pro CS4 with no problems.  Now I get into the same project and try to link the AE comp. and it throws this message in my face.  Just for one minute I wish I could change this program into a human being so I could throw it around the room for a while!!  Ahhhhhhh!!!  What's happening???!!  Help Please!!???

    Reloaded the entire suite and the problem is gone.  When in doubt reload, it is sad that I've had to do this the number of times I have.  Final Cut you are looking pretty sweet to me right now.  Adobe get to work son!  And get a call center back in the US!  The only thing I get from your current call center is either one--someone telling me to read a document that has been sent to me 10 times or two-- hung up on....ahhhhhhhh!!  Get it together!!
    Sorry....side note---thanks everyone for your help
    --if it wasn't for all you in these forums...I would be in a heap of trouble
    Thanks Again!
    Bobby

  • Media encoder exports seem overexposed - compared to within premiere pro

    i'm having constant issues with basic grading in premiere cc14 and then exporting with media encoder (h264) and things looking much brighter / overexposed on the SAME monitor.  its not a calibrated monitor (web vids only - although i know i need to remedy this) but this is happening on same monitor so problem must be in the encode, right?  others experiencing same issue have a good work around?  currently - i'm having to watch the h264 export and then go back and re-grade for that.  Pain.

    Why don't you just export from Premiere?

  • Dynamic Link and Footage reversed in Premiere Pro

    Hello community,
    I've had this problem since cs5.5 and just found ways around but I've had it and want to find a solution. I do a lot of nightlife videos and sometimes it requires me to reverse footage in order to get a desired effect. The problem I have is when I try to bring it into after effects using dynamic link, AE actually reads the footage backward versus making a new clip... it is a little awkward to grasp but let me tell you some of the problems.
    1. The tracker in AE can be  used for matchmoving or stabalization. When I would apply a track and have it run, it would go in the right direction versus the reverse I am looking for. I would move the cursor to the beginning and track backward but then the clip I brought it won't have the tracking markers
    2. Making transitions using masks for a quick roto is simple and straight forward but when I would copy that mask I just made to another clip to apply like a reveal, the mask would freeze and all the data is gone. Frustrating.
    I am on CC now and there are a few other problems I can't remember with a fuming head but that is the jist of it. Normally due to deadlines I would just un-reverse the clip, bring it into after effects, do my magic then bring it back and reverse it again.
    I want to know if this happens anyone else and either how to fix or how do you get around?
    Thanks a bunch,
    A fellow artist
    -MMK

    I do a ruff cut in PPro and then open the clips I need to work on in AEFX independently.  No LINKS.
    I export a Digital Intermediate from AEFX for PPro.
    Find this a lot less complex , flexible and manageable.

  • Why i can't use dynamic link between After effects and Premiere Pro?

    I have installed the Creative Cloud version of After effects and Premiere Pro (only them, no other software of the suite) but i still can´t link them with dynamic link. the option is in grey, and i can't even click on it.
    Some help? please!

    Ok, here goes some information about my hardware and software:
    Allienware M14XR2
    Intel Core i7-3610 QM CPU @ 2.30 GHz
    RAM 8 GB
    Windows 7 Home premium
    NVIDIA GE force 650 M
    I'm working in a Premiere Pro project using 1920x1080 .mov archives, and the project is in the same resolution.
    In Premiere pro, when i go to Archive > Dynamic Link  i only have the option of send it to Encore.
    Is this information enough?
    thanks

  • Adobe Media Encoder CC 2014 would not be updated to 2014.0.1.

    The update has failed many times. I just uninstalled to it in order to reinstall

    In Mac OS, go to Username/library/Logs/AdobeDownload/DLM.log
    You'll find at the end of the file (corresponding hour and minutes) a string like so:
    2012-08-17T16:20:29: connecting to: = http://swupdl.adobe.com/updates/oobe/aam20/mac/AdobeMediaEncoderCS6-6/6.0.1/Setup.dmg
    2012-08-17T16:20:30: ThreadDownloadUpdates:: Need to download a .sig file for this dmg at: /Users/bahaelaila7/Library/Application Support/Adobe/AAMUpdater/1.0/Install/AdobeMediaEncoderCS6-6/6.0.1/Setup.sig
    2012-08-17T16:20:30: ThreadDownloadUpdates:: downloading .sig file from : http://swupdl.adobe.com/updates/oobe/aam20/mac/AdobeMediaEncoderCS6-6/6.0.1/Setup.sig
    2012-08-17T16:20:31: ThreadDownloadUpdates: ERROR: File Size Mismatch, between what is given in manifest and what is that of bob.
    2012-08-17T16:20:31: UCGetprogress : WARNING - Download failed due to file size mismatch at server.
    Copy the link and paste in Safari, download and manually install it.
    Now close the cc app
    Relaunch it and redo the same thing for all the errors.

  • Adobe Media Encoder... Not encoding

    So I got my video all said and done.
    I export the media.
    The encoder pops up, and I start the queue.
    ...and this is where my problem starts.
    The job will sit there and not start what so ever... I left it for an hour and came back to 00:00's...
    I notice PPROHEADLESS.exe is running and pretty much maxing out my cpu.
    When I kill it, the conversion job starts, but only for a few seconds.
    Then I kill pproheadless again, and another few seconds will convert.
    If I kill the process to many times, it stops converting all together...
    Help?!

    Here is a link to another recent POST on this issue. I'm doing this to keep references to recent PProheadless posts together.
    Good luck to all,
    Hunt

  • Adobe Media Encoder CC - I Can Not Download.

    http://www.adobe.com/support/downloads/product.jsp?platform=Windows&product=160
    JUST DOİNG UPDATE...
    CAN NOT İNSTALL....
    PLEASE HELP.....

    Without system information and otehr details nobody can say anything. Chances are you will have to run the cleaner tool and start from scratch.
    http://www.adobe.com/support/contact/cscleanertool.html
    Mylenium

Maybe you are looking for

  • Compilation errors using jhs 10.1.3.1 and jdeveloper 10.1.3.2

    jdeveloper version: 10.1.3.2.0.4066 jheadstart version: 10.1.3.1.25 I have just installed both of the above and am receiving errors on compilation in both my viewcontroller and model projects. I receive the following error on the view project as soon

  • Why can't you buy a nano 6th gen on apple website?

    Now that the new generation of iPod nano's have come out, you can't buy the previous 6th generation anymore, you can still buy previous generations of iPhone etc and MacBooks but not the nano's. How can you get free engraving on the iPod nano 6th gen

  • FaceTime for iMac and iPhone at the same time

    Can you send a request for FaceTime via internet to iMac and iPad using e-mail adress while youare also sending request toiPhone using a telephone number?  Can you use FaceTime on iPone with only 2G 0r 1G serves?

  • Problem: Input must be in the format _____ in SPAD

    Hello everyone .. (sorry for my english) I want to create a new page format with size in decimal, for example: width = 255.5 mm .. but i get error : Input must be in the format _____ ... I am going to TX SU01 and click in tab Defaults, i probe with a

  • Exporting in JPG, GIFF or TIFF

    I am using iMovie to use Green Screen effect on still images. How can I export those into a still image format. I am using iMovie because I like the ease of use for Chroma Key.