Adobe Media Encoder Fails Midway Through Encode, But Says File Was Successfully Encoded

When I send a sequence from Premiere Pro to the AME queue and then start the queue, the encode runs through about a third to half of the sequence and then fails. However, AME says the encode is complete, and gives it a green check mark in the list. The log says "File Successfully Encoded." The resulting file is usually under 100kb and always has a length of 0 seconds.
If I export the sequence directly from Premiere Pro (bypassing the AME queue), I don't have any problems. If I drag a media file directly into the AME queue, that works fine, too. So far, the problem is specific to files being sent from Premiere Pro to AME.
The problem is not constant. I started to see it occasionally after I upgraded to CC 2014, but it's steadily become worse and now a successful encode is the exception rather than the norm.
I've tried deleting all my user-defined presets, including the PresetTree.xml file, and starting from scratch, but that didn't help.
Any ideas on what I should try next?
System Specs
PC w/ Windows 7
16GB RAM
NVIDIA Quadro 4000 card
Premiere Pro CC 2014.0.1

If you have done a complete reinstall, and ran the Adobe CleanScript CS5 (that is the latest), then a Repair Install should not be needed - it would do nothing.
For info, to do a Repair Install, one would insert the installation disc. When the installer module has loaded, it will survey one's system. If it finds the Adobe program(s), it will ask if you wish to Uninstall, or Repair Install. When one chooses Repair Install, it surveys the system again, for that program, and will replace, or correct any issues. This is usually MUCH faster, than doing an uninstall/reinstall.
Good luck, and not sure what else could be the cause.
Hunt

Similar Messages

Set Adobe Acrobat XI Pro. When I want to save the file in WORD, EXCEL or esporta file into ... immediately throws an error "save as failed to process this document no file was created". What's the problem?

Set Adobe Acrobat XI Pro. When I want to save the file in WORD, EXCEL or esporta file into ... immediately throws an error "save as failed to process this document no file was created".
What's the problem?
Any help in finding a solution is greatly appreciated.
Thank you,

Installed AcrobatXI PRO 11.0.09 on seven computers and laptops. Two of them gives an error when you try to save a document in WORD, EXCEL, Power Point, or when exporting to... error: Save failed to process this document. No File was created.
But all good saves in the format of TXT and jpg.
I have uninstalled and restored and re-installed and updated and registry cleaned and removed using the special utility Cleaner Tool for Acrobat, but nothing helps.
On one notebook with Windows 8.1 and Microsoft office 2013, on another laptop with Windows 7 and Microsoft office 2010, the same problem, although there are computers with Windows 7 and Microsoft office 2010 and everything works.
Tell me where to find the problem and how to solve it.
Thank you.

HT1212 ipod touch disabled due to too many tries on password. tried to restore through itunes but says I need newer version for software. now what?

ipod touch disabled after too many tries with password. tried to restore through itunes but says we need latest version of software. now what?

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

I'm using DVD Studio pro to burn a dvd but it won't let me cause I keep getting a "Formatting Failed" error message. It says "Formatting was not successful. Layer 0 exceeds max layer size allowed. Choose a suitable marker location." What does this mean?

I'm using DVD Studio pro to burn a dvd but it won't let me cause I keep getting a "Formatting Failed" error message. It says "Formatting was not successful. Layer 0 exceeds max layer size allowed. Choose a suitable marker location that will support this condition." What does this mean?
Kris

It means your file is too large to fit on a single layer disk.
Recompress to keep the overall size (audio,video and menus) below 4.5GB
x

Hi. I just downloaded "angry birds" from the iTunes store. It says it was successfully downloaded and that I can use it on the two mac products I have. I can see an icon for it in the finder on the mac, but I can't figure out how to play the game. Anyone?

Hi. I just downloaded "angry birds" from the iTunes store. It says it was successfully downloaded and that I can use it on the two mac products I have. I can see an icon for it in the finder on the mac, but I can't figure out how to play the game. Anyone?

Thank you for your reply. After a lot of fruitless searches, I hit on a page that offered the same wisdom you did. I feel like rather a fool for not knowing that. Grr. I really appreciate your answer, and that you didn't end it with "dummy." Cheers to you. Hope someone does something kind for you today.

HT4759 updated to Lion, from snow leopard after updating all necessary programs & system, recieved emails saying it was successful changing to icloud but can i access iclound No - nothing works! webmail & mail - also reset password.

updated to Lion, from snow leopard after updating all necessary programs & system, recieved emails saying it was successful changing to icloud but can i access iclound No - nothing works! webmail & mail - also reset password.

Ok 1st one. The warning restriction message relates to this line in main.cf:
smtpd_helo_restrictions = permit_sasl_authenticated permit_mynetworks check_helo_access hash:/etc/postfix/helo_access reject_non_fqdn_hostname reject_invalid_hostname permit reject_invalid_helo_hostname
The last reject occurs after the single word "permit" and is ignored.
However, that's not the problem.
I'm not exactly sure what's happening, but this might be a clue.
It would appear that either postfix is not being able to create the socket for private/policy or it's somehow created with the wrong permissions. You might need to ramp up the debug level to get a better idea.
You could check if it's being created by "netstat -a | grep private/policy" in terminal.
My guess is that it's not being created because there is no setup statement in your master.cf file, but I don't understand why postfix would be looking for it if it isn't set up. Private/policy I think relates to grey listing. Maybe gives you a hint.

When I download a document, I get a message saying download was successful, but a blank screen where the document should be. What am I doing wrong?

When I download a document, I get a message saying download was successful, but a blank screen where the document should be. What am I doing wrong?
I go to an internet company and try to download a document from it. A tab pops up saying the download was successful, but all I see is a blank screen with UI at the top. I don't understand where the download is going.

Thanks so much for your reply fanboy20.
Yes, just made sure of that. I do have the latest version of Flash player. But I have just staggered upon the answer. Chalk it up to being a newbi. I was not putting my apple tv to sleep and it would not allow me to see
you tube on my computer while it was still operating on my TV. When I realized that, I put the apple tv to sleep and bingo, my computer runs you tube fine. Thanks again for your response.

Media Coder Failing with MPEG2-DVD and H.264 Blu-Ray Encode

I am useing Adobe Media Encoder CC 2014 8.0.0.173 build.
I am a CC subscriber.
I am importing a Premiere Pro CC 2014 timeline.
I also have Premiere Pro CS6, Photoshop CC and CS6, Encore CS6, Lightroom 5, Indesign CC and CS6 installed. Just updated all apps from the cloud.
When exporting the timeline to MPEG2-DVD I get the failed status.
In the text note section this is the result: MXF decode error in "J:\Murray-Gross Wedding\CLIPS001\AA0068\AA006802.MXF" at frame 16339. Frame 16316 was substituted.
I had several frames substituted.
I tried both the Mercury Playback Engine GPU acceleration and I also tried the software only version.
The original footage is;
MXF File details:
Wrapper type: MXF OP1a (type: SingleItem SinglePackage MultiTrack Stream Internal)
File generated by: CANON, XF100
MPEG-2 422 Long-GOP
I was able to export the timeline to an avi file from Pro CC 2014. But P Pro told me that the export had failed. When I checked the folder though the avi file was there.
I am running Windows 7 home premium.
I need to make a DVD of this footage. And would prefer not to reformat the avi file I created. Thanks in advance.

Do you get encode complete with Errors or are you getting encode failed (no encoded file)? The reason frames were substituted is because the source file had errors or other problems. So during import, PPro and AME substitute bad frame with adjacent good frame and continue to import. But if there are way too many bad errors and source is too corrupted, it may not be able to import it correctly and won't be able to export. so let us know if you get exported file and you are just curious what the error message was or if you don't get encoded files going to MPEG2-DVD at all.

Encode Failed exporting to DVD but not Blu-Ray

I'm using Dynamic Link and tried both pushing from PPro and pulling from Encore, when building DVD I get Encode Failed, but when building Blu-Ray no problems. I really need a DVD version of this, any ideas?

Did you transcode before building? If not, try that.
If that does not work, export from Premiere as MPEG2-DVD, and import the resulting m2v/wav files as timeline. In other words, skip the dynamic link since you are having a problem.
Yes, you will have to calculate the bitrate. If you are able to transcode the dynamic link, but not to build, you can look at the properties of the transcoded file, and match that on export from Premiere. Or use a bitrate calculator, such as:
http://dvd-hq.info/bitrate_calculator.php

Adobe Media Server failing to record video if switched from play to record midstream

The Adobe Media Server is failing to record video if switched from play to record midstream. It is an intermittent issue that happens randomly one out of every 30 attempts.
Flash Runtime: Flash Player ActiveX 11.7.700.169 or Flash Player ActiveX 11.4.402.287
Media Server: AMS5.0.1, also FMS4.5.5
(The problem happens on both FMS4.5.5 and AMS5.0.1)
The ActionScript is as follows:
netstreamRoger.publish("719_Client","play");
Then 1 second later:
netstreamRoger.publish("719_Client","record");
netstreamRoger is streaming out the video and audio data correctly, because there is another computer playing the stream 719_Client live. So the media server is forwarding the stream correctly when live. The bug is when you attempt to playback 719_Client.flv the file does not contain any video data. The file size is not zero, and the file is not corrupted, but the file size is smaller than it would be if it had saved the video in it.
How do I submit this bug to the Media Server team, and how can I workaround this issue?
Below is the log from the Media Server 5.0.1
publish
stream
2013-05-15
16:14:20
Mountain Daylight Time
719_Client
192.168.2.231
1284
0
10
_defaultRoot_
_defaultVHost_
uGenius
_definst_
0
200
192.168.2.219
rtmp
rtmp://ugfms:1935/uGenius
rtmp://ugfms:1935/uGenius
WIN 11,7,700,169
4702111234844082543
3189
3486
normal
719_Client
rtmp://ugfms:1935/uGenius/719_Client
rtmp://ugfms:1935/uGenius/719_Client
0
0
0
0
-1
-1.000000
connect-pending
session
2013-05-15
16:14:20
Mountain Daylight Time
192.168.0.75
192.168.2.231
1284
1
10
_defaultRoot_
_defaultVHost_
uGenius
_definst_
0
100
192.168.0.75
rtmp
rtmp://ugfms:1935/uGenius
rtmp://ugfms:1935/uGenius
WIN 11,7,700,169
4702111234860859759
3073
3073
normal
connect
session
2013-05-15
16:14:20
Mountain Daylight Time
192.168.0.75
192.168.2.231
1284
1
10
_defaultRoot_
_defaultVHost_
uGenius
_definst_
0
200
192.168.0.75
rtmp
rtmp://ugfms:1935/uGenius
rtmp://ugfms:1935/uGenius
WIN 11,7,700,169
4702111234860859759
3073
3073
normal
play
stream
2013-05-15
16:14:20
Mountain Daylight Time
719_Client
192.168.2.231
1284
1
10
_defaultRoot_
_defaultVHost_
uGenius
_definst_
0
200
192.168.0.75
rtmp
rtmp://ugfms:1935/uGenius
rtmp://ugfms:1935/uGenius
WIN 11,7,700,169
4702111234860859759
3248
3704
normal
719_Client
rtmp://ugfms:1935/uGenius/719_Client
rtmp://ugfms:1935/uGenius/719_Client
flv
0
0
0
2
-1
-1.000000
unpublish
stream
2013-05-15
16:14:22
Mountain Daylight Time
719_Client
192.168.2.231
1284
1
10
_defaultRoot_
_defaultVHost_
uGenius
_definst_
2
200
192.168.2.219
rtmp
rtmp://ugfms:1935/uGenius
rtmp://ugfms:1935/uGenius
WIN 11,7,700,169
4702111234844082543
149021
19922
normal
719_Client
rtmp://ugfms:1935/uGenius/719_Client
rtmp://ugfms:1935/uGenius/719_Client
0
0
145667
0
-1
-1.000000
publish
stream
2013-05-15
16:14:22
Mountain Daylight Time
719_Client
192.168.2.231
1284
1
10
_defaultRoot_
_defaultVHost_
uGenius
_definst_
0
200
192.168.2.219
rtmp
rtmp://ugfms:1935/uGenius
rtmp://ugfms:1935/uGenius
WIN 11,7,700,169
4702111234844082543
149021
19922
normal
719_Client
rtmp://ugfms:1935/uGenius/719_Client
rtmp://ugfms:1935/uGenius/719_Client
0
0
0
0
-1
-1.000000
record
stream
2013-05-15
16:14:22
Mountain Daylight Time
719_Client
192.168.2.231
1284
1
10
_defaultRoot_
_defaultVHost_
uGenius
_definst_
0
200
192.168.2.219
rtmp
rtmp://ugfms:1935/uGenius
rtmp://ugfms:1935/uGenius
WIN 11,7,700,169
4702111234844082543
149534
20841
normal
719_Client
rtmp://ugfms:1935/uGenius/719_Client
rtmp://ugfms:1935/uGenius/719_Client
C:\Program Files\Adobe\Adobe Media Server 5\applications\uGenius\streams\_definst_\719_Client.flv
flv
13
0.000000
513
0
-1
-1.000000
unpublish
stream
2013-05-15
16:14:28
Mountain Daylight Time
719_Client
192.168.2.231
1284
1
10
_defaultRoot_
_defaultVHost_
uGenius
_definst_
6
200
192.168.2.219
rtmp
rtmp://ugfms:1935/uGenius
rtmp://ugfms:1935/uGenius
WIN 11,7,700,169
4702111234844082543
670945
294048
normal
719_Client
rtmp://ugfms:1935/uGenius/719_Client
rtmp://ugfms:1935/uGenius/719_Client
0
0
521832
0
-1
-1.000000
disconnect
session
2013-05-15
16:14:29
Mountain Daylight Time
192.168.2.219
192.168.2.231
1284
1
10
_defaultRoot_
_defaultVHost_
uGenius
_definst_
9
200
192.168.2.219
rtmp
rtmp://ugfms:1935/uGenius
rtmp://ugfms:1935/uGenius
WIN 11,7,700,169
4702111234844082543
671076
294562
normal
stop
stream
2013-05-15
16:14:29
Mountain Daylight Time
719_Client
192.168.2.231
1284
1
10
_defaultRoot_
_defaultVHost_
uGenius
_definst_
9
200
192.168.0.75
rtmp
rtmp://ugfms:1935/uGenius
rtmp://ugfms:1935/uGenius
WIN 11,7,700,169
4702111234860859759
290828
672528
normal
719_Client
rtmp://ugfms:1935/uGenius/719_Client
rtmp://ugfms:1935/uGenius/719_Client
flv
8275
0
665118
3624
2
-1
-1.000000

I'm having this issue as well. Did you ever find a solution to it?

TS3694 MY IPHONE 4S WON'T SWITCH ON APPLE SIGN JUST KEEPS FLASHING,TRIED RESTORING IT THROUGH ITUNES BUT SAYS ITS IN RECOVERY MODE AND UNKNOWN ERROR SO CANNOT RESTORE CODE 3194

MY IPHONE 4S WONT SWITCH ON THE APPLE SIGN JUST KEEPS FLASHING ITS 4 MONTHS OLD AND HASNT BEEN DAMAGED HAD ABOUT A QUARTER OF CHARGE AND JUST WENT OFF TRIED RESETING BY HOLDING HOME AND LOCK KEY, NO LOOK, TRIED DOING IT THROUGH ITUNES, IT SAYS ITS IN RECOVERY MODE AND WILL ERASE ALL DATA AND RESET, THEN SAYS IT CANT BE BECAUSE OF AN UNKNOWN ERROR CODE3194, PLEASE HELP!

Stop using caps then I'll read your post.

Flash player says install was successful, the Adobe site says otherwise--IE

Hello, all:
I'm trying to install flash player 10.2 on a vista 32-bit home premium system. It's a Gateway t6828 notebook, 3gb ram, 220gb hdd w/155gb free. The client does run Avast Internet Security, which I disabled during the install & also while attempting to view the Adobe site. Flash does work in Firefox, but not IE, either 8 or 9. This occurred subsequent to a malware attack.
I have installed/uninstalled flash & shockwave player multiple times, using both the regular download & manual installers. Browser windows were closed & the flash install logs say the installation was successful. I am always logged on as admin but just in case I ran the subacl & reset fp10.zip once anyway. I've reset IE on a couple occasions. I also ran a utility fix ie.zip which is supposed to re-register all .dll & .ocx files that IE uses. I have removed software that I thought might somehow be taking over, e.g., Real Player. I have deleted temporary files, run registry cleaners following uninstall to clean out stray registry entries, deleted the windows\system32\macromed folder following uninstallation & prior to reinstallation, as well as temporary files. I have deleted browsing history & reset cache.
Still, when I go to the adobe.com/software/flash/about site, click on the settings manager link, then click on 1 of the panels, it tells me 'this content requires flash'. AARRGG!!!!
I've actually reached a point where I don't know how to proceed. I do think a repartition/reformat/reinstall is a fairly serious step for this annoyance, especially because flash does work in firefox, but the client doesn't like it. Any suggestions? I'm goin' nuts here--I know, long walk off a short pier, but... The better part of $40 seems an awful lot to pay for somethin like this.
I truly appreciate any help, & express my sincere thanks in advance for any which I receive.

The symptoms you describe, especially the malware attack, leads me to think that you may have the "kill-bit" for Flash Player set in your [client's] registry. Can you go and verify this: http://forums.adobe.com/message/3432049#3432049 ?
If you found that "kill-bit" entry, use the download at the bottom of http://forums.adobe.com/message/3434922#3434922 to remove the entry.

After an unsuccessful itunes update i now get an "msvcr80.dll file is missing on my computer message. I tried reinstalling it for the microsoft site and it says it was successful but i still get the error message when i reboot. Any suggestions? Thanks

After an unsuccessful Itunes update I started getting a "msvcr80.dll file is missing from your computer" message. I downloaded and installed the Microsoft Visual C++ file and it said the reinstallation was successful but I still get the same error message and Itunes won"t install or run. Any suggestions? Thanks

Hey colorado65,
Follow the steps in this link to resolve the issue:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
When you uninstall, the items you uninstall and the order in which you do so are particularly important:
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
Let us know if following that article and uninstalling those components in that order helped the situation.
Welcome to Apple Support Communities!
All the best,
Delgadoh

Was updating Flash drive says it was successful but will not work on daily games

was updating flash drive & it said it was successful, but willnot work

To help troubleshoot we'll need the following system information:
Operating system
Browser
Flash Player version
When reporting issues with video or audio, it's also helpful to get your system hardware and driver details. Instructions for finding this information can be found here:
Windows
Mac
Finally, sometimes video and audio problems are caused at a lower level and not directly related to Flash Player. I recommend trying both of the links below to see how they perform. If the problem exists with both, then Flash Player is most likely not the culprit as the HTML5 video link does not use Flash Player when playing. You can verify the user of HTML5 by right clicking the HTML5 video and looking for the words "About HTML5" at the bottom of the context menu.
HTML5 video
Non-HTML5 video

Best Encoding method for decent quality but low file size

Been trying to encode some mountain bike helmet cam footage which is fairly fast moving and looking for the best method for encoding at a decent quality without to much pixelation occuring. videos will be on my website so want file size to be kept quite low. website is www.extremesportsfilms.com if anyone is interested.
Cheers

Thank you, Harm !
This is the first time in my carreer, that I've seen a qualitysetting that doesn't inflict on filesized
I went in to set the bitrate diffently, but the field is grey'd out - it's not possible for me to change.
It seems to be locked no matter what quicktime-format I choose. If I choose h.264 format insted, I CAN change bitrate, but I need to deliver in XDcam for this client.
Is there no way for me to make the XDcam files smaller, then? They end up 5-7GBs for each show and with my upload-speed, it takes me 6-7 hours to upload and I would like to speed this up by decreasing the file sizes a little, if possible?
Thanks

Adobe Media Encoder Fails Midway Through Encode, But Says File Was Successfully Encoded

Similar Messages

Maybe you are looking for