Adobe Media encoder has encountered an error: \Src\Init.cpp-754

What the heck? This occurs on all of my windows machines (Intel desktop, AMD laptop), trying to encode divx avi files that previously were able to be encoded in previous versions of AME.
Anyone know of a fix?

Then use the previous version.
AVI means nothing. I had a word document saved as AVI and PR could not handle it. AVI is just a container and can have all kinds of stuff inside, old shoes, scrap metal, chemicals, furniture, electronics, spare car parts, pharmaceuticals, you name it. The only thing relevant is WHAT IS INSIDE the container, the codec. If PR does not like it, either convert to something that is editable or use different software.

Similar Messages

  • Adobe Media Encoder has encountered an error. (please help... just few hours to deadline)

    1.                                                                                                                              2.
      2.
    after screen 2 nothing happens again  (it's cs4)

    hi SpaceCherryFilms, would be very grateful if you can be more specific (steps) on how to render directly fro PPRO CS4, this what i did & got the above error message: after editing the video i did took the ff. steps:- 1. -clicked File  2. -Export (in file pull down menu & clicked Media)  3. -Export Settings dialog box appeared (clicked Output Name [rename & location then Save)  4. -Ok (on the Export settings dialog box) 5. -Start Queue 
    * sometime times AME hangs (freezes) so i used (alt + cmd + esc) to end it, other times too the above error message pop up.
    details of my computer:
    Mac OS X version 10.6.6
    3.06ghz Intel Core 2 Duo
    Memory 4gb 1067 mhz DDR3
    Startup Disk: Capacity 999.86gb
                       Available 288.94gb

  • Adobe Media Encoder has encountered an error WinFile.cpp-785

    Hello,
    I am trying to convert videos to mp4 (h264) for my ipad.
    27 tv shows from a DVD rip, all the exact same codecs, frame size, sample rate, fps, just varying a little in duration (and of course then, size 358mb-360mb).
    At the time there was no iOS, so used xvid for good file size.  Now I must update them all.
    6 videos did convert, all 21 others failed with the error message in title.
    There is no pattern in the 6 that worked and the 21 that failed, order they ran, file size, file name size, anything.
    The encoding fails at different times as well, 1 minute, 4 minutes, but usually quickly
    Source videos all have:
    XViD MPEG-4 Codec 512x384 25fps
    MPEG audio mpga 128kb/s 48khz
    Destination files are:
    H.264
    NTSC, 512x384 24fps Progressive
    AAC, 192kbps 48kHz, Stereo
    VBR, 1 Pass, Target 1.58, Max 5.11Mbps
    I do see that the audio is encoding higher than source, but why wouldn't all videos fail?
    Will try to lower the audio and see if that helps any.
    I did try the lower audio setting, and still failed with 785.
    Second, on a failure, is there anyway to have AME continue on an error instead of wait for me to press continue?
    Message was edited by: mubhcaeb78

    I am having the same problem. I am trying to convert some .avi video because I cannot use  it likethis with Final Cut Pro, After Effects nor Premiere Pro, so when I go to convert it using the .264 codec i get this error. Any help?

  • AME CC 2014: "Adobe Media Encoder has encountered an unexpected error and cannot continue."

    Adobe Media Encoder CC 2014 on MacPro "mid-2012" (MacPro5,1) running OSX 10.9.3 and getting this error when trying to launch Adobe Media Encoder CC 2014:
    Adobe Media Encoder Error
    Adobe Media Encoder has encountered an unexpected error and cannot continue.
    Have uninstalled, reinstalled.  Checked and fixed permissions numerous times.  Tried removing all plugins and that didn't fix.  Also tried editing the text listings within the .app for OpenGL and CUDA to remove all cards listed - that didn't fix anything either.
    At this point it's uninstalled and "hopefully" everything will point to CC (non-2014 version).  Adobe Media Encoder CC works fine.  Adobe Media Encoder CS6 works fine.
    Cannot find any other reports of this issue.

    Progress in trying to fix.  This workaround was NOT successful on previous attempts, but now appears to be working.  Seems like the trick was to have AME CC 2014 started and open BEFORE doing any of this?  As always, make sure all of your permissions are set properly - had done that numerous times previously.  My issue was NOT directly permission related.
    Navigate to the following folder:
    You may see a file SHORTCUT that is invalid called "Presets":
    Remove/delete this file.  It's a broken shortcut.
    Move a folder of .EPR files into the "8.0" folder.  Call it anything except "Presets".  Go to AME CC 2014 and quit.  (I was greeted with another crash message.)
    Open AME CC 2014 again.  Your presets will not be loaded yet, but you should see an XML file that was created in your new folder like this:
    Delete this file.
    You should see a new folder also created by AME called "Presets".  Move your .EPR files into this folder and delete the original folder.  Quit AME CC 2014.  (I was greeted with ANOTHER crash message.)
    Open AME CC 2014.  Your preset files should be there at the top under the preset browser:
    Probably a good idea to keep a copy of those .EPR files elsewhere

  • I cannot download the latest update for Adobe Muse CC. I have been directed  to this formum. I have an erro message "ERROR Adobe Muse CC has encountered an error and will now exit. Please report the last few actions you took leading up to this error to th

    II cannot download the latest update for Adobe Muse CC. I have been directed  to this formum. I have an erro message "ERROR Adobe Muse CC has encountered an error and will now exit. Please report the last few actions you took leading up to this error to the Adobe Muse CC team. Trying to instantiate UID U4691 but lastAllocatedUID is only: 4491 OK"
    I am very frustrated because Muse crashes when cannot download updatres.
    I have been redirected to this forum from the 'Adobe Chat Team'
    I am trying to complete a project for a client, this is the second time I have asked for help. Can anyone please help me I
    I am using Windows 7. I am not sure if a response will come. I am new to forums. Do I wait or will someone contact me?
    Deb Kelleher
    [email protected]

    Hi Deb,
    Please accept my apologies for the inconvenience so far.
    I am not sure if you already tried this, but in case not, try to update Muse via Creative cloud directly.
    Start creative cloud application manager, if you dont have it, you can download it from here,
    Adobe - Adobe Application Manager : For Windows : Adobe Application Manager
    Login using your adobe id, once you are in, switch to Apps, and you should see the Update for Muse, click Update.
    Let me know if you get any error or warning.
    Thanks.

  • Adobe Media Encoder has stopped working

    I have Premiere version CS4, on windows vista 64 bit. All of a sudden the Media Encoder has stopped working, when I press problem details it says:
    Problem Event Name: APPCRASH
    Application Name: Adobe Media Encoder.exe
    Application Version: 4.0.1.0
    Application Timestamp: 4933bbdc
    Fault Module Name: WatchFolder.dll
    Fault Module Version: 0.0.0.0
    Fault Module Timestamp: 4933b879
    Exception Code: c0000005
    Exception Offset: 0000a7b3
    OS Version: 6.0.6001.2.1.0.256.1
    Locale ID: 1033
    Additional Information 1: fd00
    Additional Information 2: ea6f5fe8924aaa756324d57f87834160
    Additional Information 3: fd00
    Additional Information 4: ea6f5fe8924aaa756324d57f87834160
    I have restarted the computer several times and it gives the same message
    What can I do?
    Thanks!

    Did you set up a watch folder on an external or network drive, or any
    other drive that isn't there any more?
    -Jeff
    I have Premiere version CS4, on windows vista 64 bit. All of a sudden the Media Encoder has stopped working, when I press problem details it says:
    Problem Event Name: APPCRASH
    Application Name: Adobe Media Encoder.exe
    Application Version: 4.0.1.0
    Application Timestamp: 4933bbdc
    Fault Module Name: WatchFolder.dll
    Fault Module Version: 0.0.0.0
    Fault Module Timestamp: 4933b879
    Exception Code: c0000005
    Exception Offset: 0000a7b3
    OS Version: 6.0.6001.2.1.0.256.1
    Locale ID: 1033
    Additional Information 1: fd00
    Additional Information 2: ea6f5fe8924aaa756324d57f87834160
    Additional Information 3: fd00
    Additional Information 4: ea6f5fe8924aaa756324d57f87834160
    I have restarted the computer several times and it gives the same message
    What can I do?
    Thanks!
    >
    >

  • Adobe Muse CC has encountered an error and will now exit.

    Muse is not loading, comes up with the message below. I have tried re-installing but still comes up with the same message. Has anyone else encountered this and any ideas on how I can get the damn thing working again?

    Recently Muse 2014.3 was released, please update Muse version and check again.
    Thanks,
    Sanjit

  • 'Adobe Muse CC has encountered an error and will now exit' error

    My very first attempt at previewing a site in my browser produced the below error message. The message says Muse will exit but it doesn't, it just freezes and I have to force quit. It suggests I inform the Adobe Muse CC team but I can't find where they are. Can anyone help?
    Thanks

    Hi there,
    Instead of previewing the site in browser, have you tried to export HTML out of it locally, does it export fine?
    Do you get this error on a particular site or with every site?
    Thanks.

  • Adobe Media Encoder (CS5) has encountered an error (WinFile.cpp-759)

    I have a 714 MB Xvid file that I want to split into smaller pieces. I have gone successfully through a similar process earlier with a larger Xvid file using the same version of Adobe Media Encoder (CS5). It appears that no matter which output video format I choose, the process crashes with the following error message shown in a new pop-up dialog:
    "Adobe Media Encoder has encountered an error. [..\..\Src\Win\WinFile.cpp-759].
    (Even the source program file line number 759 in the above error message is always the same, regardless of my chosen output file format.)
    The only option available from this point onwards is the "Continue" button. When I click Continue the program terminates with the Windows program crash message "Adobe Media Encoder CS5 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. <Debug> / <Close program>"
    My search for other similar problem reports revealed that some user(s) has/have experienced a very similar problem in CS4, but the source line number was slightly different in CS4. Both problems are probably caused by the same error in Adobe's software. The small difference in source line numbers is probably due to some (minor) and probably unrelated changes to this C++ source module (WinFile.cpp).
    It might of course be the case that this particular input video file has some rare encoding or other embedded problem. However, the fact that I can view the video without problems using Windows Media Player does not support this theory.
    Apart from this message board I could not find any other avenue to report this bug to Adobe (without paying for support - which I am obviously not going to do as this is clearly a programming bug in the software). Hopefully some Adobe developer responsible for Media Encoder maintenance will read this forum from time to time and would subsequently inspect the source module for any obvious defects. I could supply the source video file with which this problem can be reproduced at will.
    Regards
    Jouni Juntunen

    CS4 Adobe Media Encoder & FMLE are two different softwares - you can post your query here:http://forums.adobe.com/community/ame

  • Bug report: Adobe Media Encoder (CS5) has encountered an error (WinFile.cpp-759)

    I have a 714 MB Xvid file that I want to split into smaller pieces. I have gone successfully through a similar process earlier with a larger Xvid file using the same version of Adobe Media Encoder (CS5). It appears that no matter which output video format I choose, the process crashes with the following error message shown in a new pop-up dialog:
    "Adobe Media Encoder has encountered an error. [..\..\Src\Win\WinFile.cpp-759].
    (Even the source program file line number 759 in the above error message is always the same, regardless of my chosen output file format.)
    The only option available from this point onwards is the "Continue" button. When I click Continue the program terminates with the Windows program crash message "Adobe Media Encoder CS5 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. <Debug> / <Close program>"
    My search for other similar problem reports revealed that some user(s) has/have experienced a very similar problem in CS4, but the source line number was slightly different in CS4. Both problems are probably caused by the same error in Adobe's software. The small difference in source line numbers is probably due to some (minor) and probably unrelated changes to this C++ source module (WinFile.cpp).
    It might of course be the case that this particular input video file has some rare encoding or other embedded problem. However, the fact that I can view the video without problems using Windows Media Player does not support this theory.
    Apart from this message board I could not find any other avenue to report this bug to Adobe (without paying for support - which I am obviously not going to do as this is clearly a programming bug in the software). Hopefully some Adobe developer responsible for Media Encoder maintenance will read this forum from time to time and would subsequently inspect the source module for any obvious defects. I could supply the source video file with which this problem can be reproduced at will.
    Regards
    Jouni Juntunen

    OK, I've reported the bug in the linked location. However, I had to use "Creative Suite" as the application, because "Adobe Media Encoder" was not an available option.
    Jouni Juntunen

  • Adobe Media Encoder CS4 Error: WinFile.cpp-754

    When encoding video from one format to another (no matter what is source and what is result file format) I have an error after some time or in the begining of the process. "Adobe Media Encoder has encountered an error ..\..\Src\Win\WinFile.cpp-754"
    Version of Encoder is 4.2.0.006 (updated).
    I can't encode any files. What is the problem?

    Any update on this?
    I get WinFile.cpp-754 on CS4 and WinFile.cpp-785 on CS5 trying to encode the same AVI file.
    I'm trying to load a 59.94 fps AVI file into PremierPro CS4 and need to convert it to something else (correct?)

  • Adobe media encoder error message - please help

    I purchased adobe creative suite 4 web standard in january of 2010.  I'm in the process of learning how to use all the features.  I am building a website in dreamweaver and wanted to create and import a flash movie.  I opened adobe media encoder from my program files.  I added an avi file to the encoder, chose a medium quality for web, and clicked Start Queue.  I then got the following pop up error message:
    Error Message:
    Adobe Media Encoder Debug Event
    Adobe Media Encoder has encountered an error.
    [..\..\Src\Win\WinFile.cpp-754]
    Please help.
    Thank You.

    This forum is for "flash media live encoder". For Adobe Media Encoder related queries go to Creative Suite forums.

  • Adobe Media Encoder error, please help

    I've just recently tried to use Adobe Media Encoder for the first time and no luck. When I try to run a queue it gives me the following error message and shuts down. I have AME version 5.0.1.0 64 bit for Win 7 64 bit. I'm trying to convert a .MPG into any other format. I've tried many different configurations and it still shuts down. Please help. I want to use this thing.
    Adobe Media Encoder Debug Event
    Adobe Media Encoder has encountered an error.
    [..\..\Exporter.cpp-390]
    button - Continue
    then it shuts down

    Hi,
    Having exactly the same issue. Did you manage to resolve?
    Nell

  • Can't use Adobe Media Encoder CS5. It won't encode

    I'm following lessons on Flash Professional CS5 Classroom in a Book and I've just got stuck on lesson 8 because AME won't work. The program opens fine, but when a drag the penguin.mov to it, I get this message:
    ""Adobe Media Encoder Debug Event.
    Adobe Media Event has encountered an error
    [..\..\Src\QTTrack.cpp-395"
    I then try to use it with my own movies to see if it works. It starts encoding and suddenly it stops and gives me the exclamation mark inside the yellow triangle under "Status". I click on Status and I get this message:
    - Source File: C:\Users\Rubens\Videos\Isnt she lovely.wmv
    - Output File: C:\Users\Rubens\Videos\Isnt she lovely1.f4v
    - Preset Used: F4V - Web Medium (Flash 9.0.r115 and Higher)
    - Video: 360x264, Same as source fps, Progressive
    - Audio: AAC, 96 kbps, 44.1 kHz, Stereo
    - Bitrate: VBR, 1 Pass, Target 0.40 Mbps, Max 0.60 Mbps
    - Encoding Time: 00:00:00
    11/24/2010 11:04:56 PM : Encoding Failed
    Error compiling movie.
    Unknown error.
    Hope someone will give me a solution for this frustrating situation. Thank you.

    Are Adobe applications all updated?  Try help>updates to make sure.
    If not, you might post some info on your system to help troubleshoot.
    Dennis

  • Adobe Media Encoder CS5 not encoding

    I'm following lessons from Flash Professional CS5 Classroom in a Book. Chapter 8 is where I met Adobe Media Encoder CS5, but couldn't go any further with the lesson because as soon as I drag the penguin.mov to AME I get the message
    "Adobe Media Encoder Debug Event.
    Adobe Media Event has encountered an error
    [..\..\Src\QTTrack.cpp-395"
    I then click "Continue" and I get the Windows window saying "Windows is checking problem..." I click close to close the Windows window and it also closes AME.
    I open AME again and I drag my own Windows Media Files to see if it will work. AME works for awhile and then stops with the exclamation mark inside the yellow triangle under "Status" I click "Status" and I get this log messages:
    - Source File: C:\Users\Rubens\Videos\Isnt she lovely.wmv
    - Output File: C:\Users\Rubens\Videos\Isnt she lovely1.f4v
    - Preset Used: F4V - Web Medium (Flash 9.0.r115 and Higher)
    - Video: 360x264, Same as source fps, Progressive
    - Audio: AAC, 96 kbps, 44.1 kHz, Stereo
    - Bitrate: VBR, 1 Pass, Target 0.40 Mbps, Max 0.60 Mbps
    - Encoding Time: 00:00:00
    11/24/2010 11:04:56 PM : Encoding Failed
    Error compiling movie.
    Unknown error.
    Pramod: 1. Please log into your Adobe account.
    Pramod: 2. Once you log into your account, you will see tabs ' Purchases, Support, Community and Account Information.
    Pramod: 3. Click 'Customer Support Portal' under support tab.
    Pramod: 4. Once you click on 'Customer Support Portal', you will get the option 'Get Support'.
    Pramod: 5. Under 'Get Support' tab you will get the tabs 'Technical Support, orders & Returns and Serial Number'.
    Pramod: 6. Click on Technical Support and Choose issue type other.
    Pramod: 7. Choose product as Additional Products.
    Pramod: 8. Click on 'Continue'.
    Pramod: 9. The last page is 'Create a support case
    You will be receiving an email regarding the webcase, once our product experts look in to your issue.
    rubens: OK, I copied your instructions and will follow it
    Pramod: Once you get the email mail, you can check in support port (in Adobe account) for details.
    Pramod: Is there anything else I can help you with?
    Can anyone help me with some clues of what I'm possibly doing wrong?
    Thank you

    I have the same problem since I update my mac book pro Mac Lion 10.7.3
    Adobe Media Encoder CS5.5 doesn't have a preview

Maybe you are looking for

  • How can I unsync my old iphone and sync my new iphone to my macbook

    I'm trying to unsync my old iphone 3s (I think it's that) from itunes, I have looked at itunes to see if there is a symbol to unsync, but the directions I have followed seem to show a different itunes than the one I have, I've tried to update to the

  • Problem synching Z30 with Blackberry Link

    Hi there, I'm having problems synching my Z30 calendar and contacts with my Blackberry Link. I'm getting the following error message: "Sync was unsuccessful CPreferencesManager: Configuration Value for /Preferences/Account_1_65538/SyncAccountld_2not

  • Sending music from mbp to a bluetooth receiver

    hi everyone.  first time post. i have a mbp 10.7.2.  i get my internet via a log in wifi system (dormatory style).  i used to use my airport express to send music wirelessly to my stereo.  since moving to a new location the airport express (and apple

  • How to easily deploy a WAR file?

    Hi everyone. I'm not really an portal user but I was tasked to deploy a WAR file into our Oracle portal installation. The file came with instructions but there's something wrong. I went to our mid-tier server (let's call it mid.company.com) and was a

  • Print Booklet issues: indd adds very unnecessary pages to my document when I try to "print booklet"?

    I have no idea why this is happening, but it is driving me batty and makes zero sense and I need I had a 30+ page document that was correctly booklet printing and added chapter start pages through the doc. I did not renumber or start sections on thes