Adobe Media Encoder Locking up with AVCHD

Greetings,
I have run so many tests on this project I don't know what else to try, so here it goes...
My system -
Windows 7
ASUS P6T mobo
Core i7 920
Quadro FX 1800 w/Elemental Accelerator
PPro Prem Prod CS4
All current drivers and updates installed
I have plenty of speed to run AVCHD but upon encoding in AME there is a crash issue.
Source footage is 10 minutes of AVCHD (.mts) captured at 17Mbps, 1920x1080i, 60i.(I've also tried other AVCHD source footage).
I run Elemental Accelerator on a Quadro FX 1800 card with the latest version of drivers. The CS4 version is also latest version.
The footage is edited in PPro. It has several titles, one of which is an AE linked title, but fairly simple.
The footage is edited as timelapse, sped up between 200-400%, so, it's pretty 'busy'.
Audio track is standard .wav file
Upon export, I wanted to make a master file at 1920x1080p, using Elemental H.264...or Elemental MPEG-2.
I check render at maximum quality....multiplexer is TS. I've tried the preset bitrates, and custom from 12-28kbps.
Every time I set it to encode, AME locks up....at random times. The entire system locks, no mouse response, and have to do a hard restart.
I've tried MANY test clips...mostly around 2-5 minutes in length. Sometime the shorter clips will render, but if I go over this length it always locks up.
I did try bitrates ranging from 12Kbps to 28Kbps....and it did seem once I went over 15Kbps they ran longer or enabled a longer 'attempt' or a successful encode up to 5mins. Still, with those exact settings it locks up on a longer encode.
I made a successful encode using a non-Elemental preset, but it takes foooreever. 3.5 hours for 10 minutes of footage at 1920x1080p...which seems ridiculously long on a GPU enhanced card. As a comparison, I have a third party encoder (AVS) and it FLIES through the (pre-rendered) footage at blazing speeds with good quality. (Yes, I know that's diff than the first pass encode however).
I've tried un/reinstalling CS4, Elemental, and all drivers on a CS4 Clean Script for Windows....no help whatsoever. Defragged, ran CCleaner....no help.
Is my bitrate too low? GPU issues? Voodoo curse?
Any advice is greatly appreciated.

Thanks for your response dradeke. Yes, that was one of the fist things I checked. I double checked with Elemental Tech support, and even sent them my project files to see if they could duplicate the crashes but they have not found any issues on their end. I have all the updates to both CS4, EA, Windows.
I'm at a total loss here...I've even switched the projects to other drives, and tried deleting prefs.

Similar Messages

  • When will Adobe media encoder 8.0 with wraptor DCP support be  availabile

    when will Adobe media encoder 8.0 with wraptor DCP support be  availabile

    Was that a video showing the 2014 updates?
    Do you have the CC 2014 updates installed?
    Have you checked with other user in that forum to see if there is more information there? Adobe Media Encoder (AME)

  • Having major issues with Adobe Media Encoder (AME) - exporting with weird image flickering/colour anomalies, crashing regularly, freezing during encode...!

    Hi Guys
    I am having some real issues with Adobe Media Encoder (AME) at the moment.  It appears that I am unable to encode an h.264 for Vimeo from a Premiere Pro Project file at the moment without at least some weird image issues that are not supposed to be there.  These include weird flickering, colour changes, artefacts etc.  This is if I am lucky...often I am unable to get the process to complete as the application either crashes and tells me there has been a problem or it simply freezes and I have to force quit the application and often restart my machine.
    The problem seems to not to just be with h.264 for the web encodes but also with BluRay h.264 as well. As yet I haven't seen if there is a problem with MPEG-2 for DVD so I will check this out too!
    Does anyone else see this happening or does anyone know what might be the problem?
    I thought the Premiere Pro project might have been corrupt so tried a different project but the same issues were happening here too.
    Any help would be really gratefully received.
    Cheers
    EDIT - I have just found this online which is exactly the problem I am having! Thanks a bloody bunch Apple! 10.9.3 causing headaches for Mac Pro users | MacIssues
    Message was edited by: Alex Cameron

    Agreed, I now have a project to GET OUT, and AME crashes consistently 1/3 into the render. It appears to halt all processing after (real time) 00:02:30
    Am seriously considering uninstalling CC as I am beginning to find other issues in some apps, and going back to CS6/MC just so I can get work out. Durn it Adobe this is AWFUL!!
    Alright, let's try to be constructive instead of throwing rocks... but the frustration level is high, and I have material on deadline. Let's get with this, guys...
    What OS Win7, 64-bit
    What version of AME/PPro (Please be specific by getting the full version number in the About Adobe Media Encoder screen) 8.2.0.54 Ppro: 8.2.0 (65)
    When is it crashing (Again, the more detail here about where it was in the encoding process the better) roughly 1/3 into the sequence, always on exactly the same frame - tried replacing the clip with something different to see if it was a timeline error, and NO EFFECT.
    What is your source (PPro project or media file (what kind?)) PPro
    If the source if a PPro project, does it work when exporting directly from PPro? NO
    What format are you exporting to? H.264, QT, WM, tried everything my client can play.
    Do other formats work? MPEG2, QuickTime, etc? NO
    Have you tried with GPU rendering on? How about turning it off by switching to Software-only mode? Mine doesn't have any choice, it's software-only.
    Have you tried disabling Native Sequence Loading? (AME Preferences: General > Enable Native Sequence Loading) No effect
    Other things I tried: uninstalling/reinstalling AME, setting cache to a fast local disk.

  • MPEG-2 codecs missing from Adobe Media Encoder CS6 installed with Creative Cloud Membership

    Some people who have downloaded Adobe Media Encoder with Premiere Pro CS6 as part of a Creative Cloud Membership subscription have a problem in which the MPEG2, MPEG2-DVD, MPEG2-Blu-ray, Dolby Digital, & MXF OP1a codecs are missing.
    To fix this issue, install the Adobe Media Encoder CS6 (6.0.1) update. Choose Help > Updates to install the update.

    It's true. We reached the conclusion that the version CS6 is inferior, a step back,  than 5 or 5.5. What's good about it, is the Audution CS6, which is a great replacement for the flawed Audition CS5 accompanying Suite 5.5. You can almost forget the Soundbooth ... Soundbooth ... hmmm, better not comment, but anyway, the most polite thing that i can say it, is that it is a demonstration of how a company decides that its users are not able to think and not able to learn or understants anything. Anything else that i want to say about Soundbooth can not be written here ....
    Adobe has demonstrates this development cicle along all this years. The products takes an uphill curve of development, and suddenly, goes back, showing wrong decisions was taken. So after some time , the products starts to evolve again . CS6 shows this stop evolving point. Now we have to wait untill new uphill curve of development starts again.
    Well, but like their predecessors AA CS6 still not are good enough to dispense Audition 3, but it is a good outcome for the Suite CS5.5 Audition at least was a sign of improvement in this Creative Suite CS6
    Many of the features and effects that have been deliberately taken out of version 5, now returned in 6, (some) showing that at Adobe at least recognizes when misses badly. But the optimal effects panel of AA3 did not return, some effects of AA3 as fade in and fade out did not come back in AA 6, the optimum VST support of AA3 to not are present in AA6 like many VST we have here that was expensive, you do not work in 6, thus, by these and other reasons we can still not dispense AA3.
    Maybe in CS7 we users cam be satisfied.

  • Adobe Media Encoder CS4 problem with watchfolder.dll

    When i loading Adobe Media Encoder CS4, i have this error and application crash:
    Problem signature:
    Problem Event Name: APPCRASH
    Application Name: Adobe Media Encoder.exe
    Application Version: 4.0.0.0
    Application Timestamp: 48b3250d
    Fault Module Name: WatchFolder.dll
    Fault Module Version: 0.0.0.0
    Fault Module Timestamp: 48b32139
    Exception Code: c0000005
    Exception Offset: 00008a83
    OS Version: 6.0.6001.2.1.0.256.1
    Locale ID: 1049
    Additional Information 1: fd00
    Additional Information 2: ea6f5fe8924aaa756324d57f87834160
    Additional Information 3: fd00
    Additional Information 4: ea6f5fe8924aaa756324d57f87834160
    Read our privacy statement:
    http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409
    OS Version: Windows Vista Ultimate SP1
    Processor: Core 2 Quadro 2,66 Ghz
    Memory: 4GB

    These directions are specifically for windows 7 x64
    It may be hidden since it's a system folder. You can get to it one of two ways.
    Either: Hit start button + r to get run, then insert  (C:\Users\Administrator\AppData\Roaming\Adobe\Adobe Media Encoder\4.0\) without the () and press enter. *This is assuming that your username is Administrator. If the folder exists it will take you there, even if it is hidden.
    Other way: hit start button on keyboard and type in "folder options". Press enter when it shows up in the start menu search. Click on the View tab then select "Show hidden files, folders, or drives" and uncheck "Hide protected operating system files".  This should enable you to see both the AppData and Roaming folder. You may want to undo these selections otherwise you'll see files you usually don't want to see. (thumbnail caches...)
    If neither of these methods work, let me know which folders you see in this directory "C:\Users", Administrator may not the account you're currently running on.

  • Premiere Pro and Adobe Media Encoder running slow

    Hello everyone,
    I'm having trouble with CS4, which is running significantly slower than CS3 did on a older machine. The CS4 suite is installed on a Dell Precision M6400:
    Windows Vista 64-Bit
    Intel Core 2 Duo CPU T9400 @ 2.53 GHz
    8 GB RAM
    NVIDIA Quadro FX 2700M Graphics with 512MB dedicated memory
    The OS is running on a 57.5 GB HD (C:) and the Adobe suite is installed on a 298 GB Solid State HD (D:), except for Adobe Media Encoder, which is installed on the C: drive.
    My project has 4 15-16 minute sequences. The sequences are in DV NTSC, 29.97 fps,  My scratch disks are set to a folder on the C: drive. Media Cache Files and the Media Cache Database points to a folder on the D: drive.
    These are some of the problems I'm having:
    - Premiere Pro CS4 generates peak files every time I open a project
    - It then takes 3-5 minutes to render before I can preview a 16-minute sequence
    - Adobe Media Encoder takes 5 hours to render a 16-minute sequence (as flv) that has been previously rendered
    - AME takes 1 hour to render every 15 minute sequence that has never been rendered before
    Are my settings affecting their performance? Is there any way to improve it? Thanks.
    (Premiere Pro is the only app that is slow)

    The data rate for replay is one thing, the data rate from disk to memory then from memory to CPU and back the other way are different matters and ought not to be confused. It is well-established that for a computer to edit AVCHD you need top end components, and note that I said there were three tasks to distinquish with increasing hardware requirements, namely merely replaying the video, specifying edits in the editor and then the rendering. It is commonly accepted by all the industry vendors that to do remotely commercial AVCHD rendering you need a minimum Quadcore CPU then that eats data fast, in order to not let it go to waste you need a fast motherboard bus fast memory and in order for none of those to go to waste you need the fastest disk set-up you can manage. I in fact have a 4-disk RAID0 volume using SATA (I think the disk model is SATAII but I have to await return from the repair center before I can confirm). For this RAID0 volume I have run speed test software from BlackMagic because I have one of their HDTV capture cards. It recorded that this volume which remember is doing parallelised IO is just fast enough to receive a encoded HDTV stream from the BlackMagic card but too slow to receive an uncompressed HDTV stream, indeed when I tried both I found the volume did keep up with compressed but fell behind with uncompressed. Remember that with a RAID0 volume of 4 SATAII disks a given file gets spread over the four disks and hence IO is spread over those 4 3G/s data lanes. Also remember with these disks 3G/s is just a burst speed, for AVCHD we are interested in sustained serial IO which is much less.
    Before my machine broke down, I found that it took 5 hours to render 33 minutes of HDTV albeit as it went along it transcoded from AVCHD to a Microsoft HD format for Vista-only. Another interesting thing is that I found that the longer this render ran the slower it became, the estimated time started at 3 hours but the actual was five and the last one third took maybe 3 hours. Because the machine broke after that run I couldn't figure the bottleneck. For my machine bear in mind that at the repair shop we found that the Quadcore had only half the necessary electrical power plugged in, the monitor software showed however that it constantly ran around 90% of whatever capacity that reduced power supply permitted. Now then we can puzzle over why it got slower and slower and yet CPU consumption remained consistent and near to full capacity, memory was not the bottleneck because that was constant at 6.4G. But you can say that this was maybe performing like a Dualcore and was hitting some sort of wall, if you had a 1 hour render with that rate of degeneration of performance factored in what would happen to the render time, and for 3 hours you could be running indefinitely. I hope when the machine comes back the correct power supply will make it behave like a Quadcore should for this type of application. Anyway I have two theories for the degradation. First is just that PrProCS4 was getting its knickers in a twist and thereby just doing more computation per minute of video to be rendered as time went by, maybe internal resource management related to OO-type programming maybe, or related to disk IO falling behind, both these theories have problems, for the latter the CPU usage should then have dropped also.
    Anyways, you need really a Quadcore system and blazing fast disk to work fully with AVCHD commercially, we found an external SATAII disk so if I were you I would just go get one and move on with your life.
    Message du 03/06/09 16:08
    De : "Jim Simon"
    A : "JONES Peter"
    Copie à :
    Objet : Premiere Pro and Adobe Media Encoder running slow
    For AVCHD you MUST have FAST disks.
    AVCHD actually has a lower data date than DV. You need lots of CPU muscle, but disk speed is really not a factor specific to AVCHD. Anything that works for DV will work just as well for AVCHD (and HDV as well).
    >

  • CS4 crop in Adobe Media Encoder

    Hi,
    First question is there no forum for the Adobe Media Encoder
    that ships with CS4 FlashPro (master collection)?
    this seemed the best place possibly
    I have a video in quicktime format. Quicktime player says it
    is 720x480.
    When I play it in Quicktime it has black bars top and bottom.
    When I look at it in Media encoder it has black bars top and
    bottom.
    I turned on crop in the input window, and adjusted to remove
    the black bars.
    I set output to change output size. It said output 720x350.
    makes sense.
    the rest of the settings are f4v same as source default.
    When I view the output window in media encoder it appears to
    have black bars on the sides?
    when I load the video into a video player in flash with
    scalemode set on noScale it has black bars on the sides, top and
    bottom black bars are gone.
    what's the deal, I just want it the same size with the black
    bars gone from the top and bottom, why do I have side bars now??
    thanks
    mark

    Hi Mark,
    I tried the following steps and it worked for me, can you
    also try out the same at your end?
    1. Import file in AME, choose FLV | F4V format and click
    preset link to launch settings UI
    2. Choose preset F4V Same As Source
    3. In Source Preview, Click Crop icon and drag crop rectangle
    to crop out the black portion (top, bottom bars)
    4. In Output Preview, change Crop Setting to 'Change Output
    Size'. This should remove the black portion from the encoded video.
    This however, will reduce your output video size also (so that
    there is no squishing).
    Thanks
    Aurobinda

  • Soundbooth CS4 - does it include Adobe Media Encoder

    Hi there,
    i am especially interested in Adobe Media Encoder, to setup an encoding workstation.
    My question is, if Adobe Media Encoder is bundled with Soundbooth CS4, and if it is available as a standalone program or if AME can only be opened through Soundbooth directly.
    I would be happy if someone can give me an answer to this. AME doesnt seem to be available as a standalone purchase in the Adobe Store.
    Kind Regards,
    Sascha

    Hi Sascha,
    Adobe Media Encoder is bundled with Soundbooth, but is only available from within Soundbooth when saving files. It is available as a stand-alone application when installed with Premiere Pro CS4, but I'm not aware of any plans to sell it as an individual product.
    Durin

  • Adobe Media Encoder: Audio won't export with video

    I am trying to convert an AVCHD video for viewing on my iPad 3. I use Adobe Media Encoder and select the iPad 2 settings (1920x1080) and it exports the video perfect, but no audio. I have "Export Audio" checked off. I tried it with 5 other settings and it just wont include the audio. Any ideas?

    Seems random people are running in to this, so hopefully this solution will be found by whomever's looking.
    If you're exporting video files from Final Cut Pro as .mov, and then trying to convert said .mov to an .mp4 using Adobe Media Encoder and are losing audio even though you're multiplexing, try this...
    Make sure that you export only a 2-channel audio track from FCP.   When I export from FCP, I split my audio into various tracks by default.  Great for making master clips, but problematic if uploading to YouTube or doing further encoding in Adobe Media Encoder.   Like YouTube, if you have more than 2 tracks of audio, Media Encoder seems to get confused and ignores all audio tracks.  Combine all audio into a 2-channel stereo track and see if that solves the problem.
    Regardless of editing program, see if reducing number of audio channels from source clip solves problem.

  • Adobe MEdia Encoder Crashes with big files inputed

    Hello,
    There isn't a forum for the Adobe Media Encoder, so I thought this would be a good spot. I am an after effects and Premiere user who likes the idea Adobe seems to have of using the media encoder to cover all my encoding needs.
    My typical workflow, especially since these days I'm doing more shorter form animations, is to render out to a Quicktime Animation codec file as my main archive file. From there, output all the various different web versions, flv, etc from that core archive file. Since my projects usually aren't running more than 5 minutes, this leaves me with a nice 3 - 7gig file.
    Problem: I'm running CS4 and the media encoder crashes when I input files that are in this file size range. The program locks up when I push start que, and then eventually crashes. Works fine with smaller size files that are about under a gig.
    I can run a render out of after effects, which seems to be more stable. But I'd love to be able to use this great new tool.
    Here's my machine specs if it helps:
    PC
    Intel Quad Core Q9550 @ 2.83 ghz
    4gB RAM
    Windows Vista 64 bit ultimate
    All updates current for CS4 apps as of 01/30/08
    Running Adobe Media Encoder V 4.01.078
    Hard drives are nothing special. 7200 rpm western digital internal and external. I've tried all sorts of hard drive configurations, where the input is coming from, where it's going, etc. No difference.
    I have been experimenting with using Lossless AVI's as my "uncompressed" archive file. Works well, but same crashing with the Media Encoder.
    Also tried experimenting with frame size alterations during encoding, no difference there. Also, whatever the output codec is, be it FLV, H264, etc. no difference.
    Anyone have any thoughts or have experienced similar issues? I hope all my MAC friends aren't right, seems like all my attempts to streamline my workflow with this CS4 and beefy PC combo are crashing and burning.
    Anyone else feeling this pain, or have recommendations?
    Thanks,

    Thomas, thanks for your suggestions on Vista optimization. That Sheer Codec looks nice, but hard justify the cost when I've been working for years with essentially uncompressed codecs that work well. Will play more though to see if the cost would actually pay off in the long run though.
    In general I made a decision that it was too early to throw in the towel on my old uncompressed codecs. The Quicktime animation codec has always been for me the safest, most universally accepted, and most reliable "uncompressed" codec. It's always worked in the past, not gonna give up just cuz media Encoder CS4 has troubles.
    Mylenium, thanks for the reminder about the silly platform wars. I've always felt the same as you, but when I'm stressing sometimes the silly propaganda can get to me. Makes me forget that no matter what system ya got, it never works perfect!
    Here's an update. I have trying my best to learn more about the bug and have come to some interesting realizations. The AME does work with larger files, just not the larger files that I had been using at the current moment. Older files of mine as big as 20GB can be inputed into AME with fine results.
    This being said, it scratches out most of the RAM overload thoughts with AME.
    The difference with my current files that were causing AME crashes: larger than a few GB, came from AE, had the 1.21 pixel aspect ratio metadata.
    When I re-interpreted the file in AE into a square pixel aspect ratio, exported it, it was then successfully inputed into AME.
    I have read just now that there were changes in After Effects widescreen pixel aspect ratio interpretation in CS4. Can this change be causing problems in my AME. Not positive, but I'm now thinking after many days of testing that the bug could have its roots somewhere in this ball park.
    If anyone from Adobe is reading this, I would love any ideas you might have on this issue. In general, there is really no support for the Adobe Media Encoder itself. This is not good, considering how it is so necessary for AE and Premiere users like myself.
    Thanks,

  • Maximum file size with Adobe Media Encoder?

    I seem to be having a problem when converting files in AME.
    I'm converting .m2v files into quicktimes files, using the DVCPRO HD 1080i50 codec. No sound is being exported with the audio.
    Dimensions are 1440 x 1080, frame rate, field type and aspect are locked at 25, Upper First and HD Anamorphic 1080 (1.333) respectivly.
    I've encoded about eleven other files of the same type without fail, however this certain file is at 1.7gig compared, where as every other file I wanted to encode is under 1gig.
    I'm using an Asus N53SV with 16gig of ram, so I'm sure my laptop can handle whatever is thrown at it. I'm using a 64bit operating system on Windows 7 home premium Service pack one.
    Processor: Intel Core i7 - 2630QM CPU @ 2.00Ghz
    RAM Memory: 16gig
    Graphics card: Nvidia Geforce FT 540M
    Progam: Adobe Media Encoder CS5.5 ver. 5.5.1.12
    The error log reads:
    - Source File: G:\Digital Postcard\To convert\Untitled-6.m2v
    - Output File: G:\Digital Postcard\To convert\Untitled-6_2.mov
    - Preset Used: Custom
    - Video: 1440x1080, 25 fps, Upper, Quality 100
    - Audio:
    - Bitrate: DVCPRO HD 1080i50
    - Encoding Time: 00:09:50
    04/19/2012 03:19:30 AM : Encoding Failed
    File size that I want to encode is 1.7gig
    I'm assuming either the file is corrupt or I don't have sufficient specs to handle the large file.
    Any help will be great,
    Thanks.

    There are no file size limits to the software beyond what would be imposed by the operating system itself and the file format of the drive.
    So...assuming you have enough drive space, something else is going on.

  • No Sound When Converting to Cineform AVI with Adobe Media Encoder

    I've found that I totally prefer to convert my AVCHD files to Cineform AVI, it looks great and is much easier to edit for sure! I did it using the trial version of Neoscene but found I can do it via Premiere and the Adobe Media Encoder. so, I tried the later two.
    When I first tried with Neoscene I didn't have sound with the converted files. I tried to trouble shoot this in a couple of ways that were suggested online. The thing that finally worked was downloading and installing some ac3 thing...
    When I later converted using adobe media encoder it didn't have audio. I can't seem to find a resolve anywhere for this. It does however have audio if I do it through Premiere. But, that would be a tedious process to convert a lot of files through premiere, it would be profoundly easier using the media encoder.
    So, does anyone know how i can fix this?

    I haven't posted on the cineform website, I assume they want people to straight up buy their stuff and prefer people are ignorant to the fact they can do it through AME for free (provided they already have it). It's convienent for them that it is broken, encouraging people to buy their software... (assuming they think like this;).
    I don't know what HDLink is... I don't know what you mean by "the AC3 thing" either...
    Thanks for the prompt posting, I would love to know how to resolve this!!!

  • Could not complete the Render Video command because of a problem with Adobe Media Encoder.

    So initially, my problem was solved, but it stopped working again.  Same issue.  I tried installing the media encoder app, but no luck please help!
    Here's the original post:
    Hello, I'm running a macbook pro retina, and previously I was able to render video with no issue, and now this is popping up.  I've tried deleting and reinstalling photoshop, but it was not helpful. I would very much appreciate any help or guidance.  Thanks!
    Here's the error message I get:
    Could not complete the Render Video command because of a problem with Adobe Media Encoder.
    Here's the original thread: Could not complete the Render Video command because of a problem with Adobe Media Encoder.

    Have you tried re-installing Photoshop?
    Benjamin

  • Mac Pro restarts with kernel panic error during Adobe Premiere CS6 or Adobe Media Encoder CS6 render/encode.

    Multiple times this week, my Mac Pro at work has been restarting during renders in Adobe Media Encoder CS6 and Adobe Premiere CS6. This seems to be specific on this computer only. Identical computers don't have this problem. Here is the system report after it reboots to OS X:
    Interval Since Last Panic Report:  252068 sec
    Panics Since Last Report:          2
    Anonymous UUID:                    7DF9A04B-0693-5FC4-60CF-4BC6ABDB3C1E
    Fri May 17 15:37:07 2013
    panic(cpu 0 caller 0xffffff8009ab7e95): Kernel trap at 0xffffff8009e1b814, type 14=page fault, registers:
    CR0: 0x000000008001003b, CR2: 0x00000000000000b8, CR3: 0x000000000c3d3000, CR4: 0x00000000000206e0
    RAX: 0x0000000000000001, RBX: 0xffffff8039ebfb98, RCX: 0xffffff800a08eb00, RDX: 0xffffff82413abde8
    RSP: 0xffffff82413abde8, RBP: 0xffffff82413abe20, RSI: 0x00000000000000b8, RDI: 0x0000000000000001
    R8:  0x0000000000000000, R9:  0x00000000000003ff, R10: 0xffffffffffffffff, R11: 0x00000000ffffffff
    R12: 0x000000000000004a, R13: 0x0000000000000371, R14: 0xffffff8040611cb0, R15: 0xffffff80404ec008
    RFL: 0x0000000000010206, RIP: 0xffffff8009e1b814, CS:  0x0000000000000008, SS:  0x0000000000000010
    Fault CR2: 0x00000000000000b8, Error code: 0x0000000000000002, Fault CPU: 0x0
    Backtrace (CPU 0), Frame : Return Address
    0xffffff82413aba80 : 0xffffff8009a1d626
    0xffffff82413abaf0 : 0xffffff8009ab7e95
    0xffffff82413abcc0 : 0xffffff8009acd4dd
    0xffffff82413abce0 : 0xffffff8009e1b814
    0xffffff82413abe20 : 0xffffff7f8bcf4d54
    0xffffff82413abe60 : 0xffffff7f8bcf72f1
    0xffffff82413abf20 : 0xffffff8009d86e2b
    0xffffff82413abf60 : 0xffffff8009a3dcfe
    0xffffff82413abfb0 : 0xffffff8009ab2977
          Kernel Extensions in backtrace:
             com.apple.nke.asp_tcp(7.0)[78FAA01C-ABC4-3AD3-8D9A-6187F7911E1A]@0xffffff7f8bce f000->0xffffff7f8bcfbfff
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    12D78
    Kernel version:
    Darwin Kernel Version 12.3.0: Sun Jan  6 22:37:10 PST 2013; root:xnu-2050.22.13~1/RELEASE_X86_64
    Kernel UUID: 3EB7D8A7-C2D3-32EC-80F4-AB37D61492C6
    Kernel slide:     0x0000000009800000
    Kernel text base: 0xffffff8009a00000
    System model name: MacPro5,1 (Mac-F221BEC8)
    System uptime in nanoseconds: 76945023460235
    Model: MacPro5,1, BootROM MP51.007F.B03, 8 processors, Quad-Core Intel Xeon, 2.4 GHz, 20 GB, SMC 1.39f11
    Graphics: ATI Radeon HD 5770, ATI Radeon HD 5770, PCIe, 1024 MB
    Memory Module: DIMM 1, 4 GB, DDR3 ECC, 1066 MHz, 0x857F, 0x463732353155363446393333334700000000
    Memory Module: DIMM 2, 4 GB, DDR3 ECC, 1066 MHz, 0x857F, 0x463732353155363446393333334700000000
    Memory Module: DIMM 3, 1 GB, DDR3 ECC, 1066 MHz, 0x80CE, 0x4D33393142323837334648302D4348392020
    Memory Module: DIMM 4, 1 GB, DDR3 ECC, 1066 MHz, 0x80CE, 0x4D33393142323837334648302D4348392020
    Memory Module: DIMM 5, 4 GB, DDR3 ECC, 1066 MHz, 0x857F, 0x463732353155363446393333334700000000
    Memory Module: DIMM 6, 4 GB, DDR3 ECC, 1066 MHz, 0x857F, 0x463732353155363446393333334700000000
    Memory Module: DIMM 7, 1 GB, DDR3 ECC, 1066 MHz, 0x80CE, 0x4D33393142323837334648302D4348392020
    Memory Module: DIMM 8, 1 GB, DDR3 ECC, 1066 MHz, 0x80CE, 0x4D33393142323837334648302D4348392020
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8E), Broadcom BCM43xx 1.0 (5.106.98.100.16)
    Bluetooth: Version 4.1.3f3 11349, 2 service, 18 devices, 1 incoming serial ports
    Network Service: Ethernet 1, Ethernet, en0
    PCI Card: ATI Radeon HD 5770, sppci_displaycontroller, Slot-1
    Serial ATA Device: HL-DT-ST DVD-RW GH41N
    Serial ATA Device: WDC WD1001FALS-41Y6A1, 1 TB
    USB Device: Keyboard Hub, apple_vendor_id, 0x1006, 0xfd300000 / 2
    USB Device: Apple Keyboard, apple_vendor_id, 0x024f, 0xfd320000 / 3
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x5a100000 / 2
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0x5a110000 / 3
    FireWire Device: built-in_hub, 800mbit_speed

    That doesn't look like a complete panic report. Is there any more to it? Regardless, I suggest you run the extended form of the Apple Hardware Test. If it fails to identify a fault, remove the RAM upgrade and test with the original RAM.

  • Exporting with Adobe Media Encoder CC 2014 loses sound.

    So... I've been having a hell of a time with the new Adobe creative cloud when it comes to video editing.  The drop of .flv format, unable to straight export .H24 formats from after effects, it's a total nightmare.  Here's the issue, to export as a .H24, you now have to use Adobe Media Encoder CC 2014.  The biggest issue, however, is at the end of the export, when you open the video, half of the video's sound is mysteriously GONE.  Just gone.  If you go back to after effects, look at the file and the audio, the wave forms are there.  There's nothing that would make it lose sound.  Audio is selected on export... I have no idea what's up.  Editing videos for youtube was a snap in previous versions of After Effects, now It's becoming almost impossible.

    I think the same problem:
    Part of audio missing in mp4 AAC rendered files from Watched Folders
    Probably with cached files. Try this: Adobe Media Encoder 2014.2 Part of audio missing in mp4 AAC rendered files - cache problem? - Video Production Stack Exc…

Maybe you are looking for