Adobe Media Encoder wont Render from Beginning

Hi there I am trying to render a After Effects Project but when i try to render in Media Encoder it will only render from 1.47.26sec into my project ot the start,
i have tried to adjust the Source range in Encioder as well as make sure the work area is the full clip in after effects but cant figure it out, help would be much appreciated.
Thanks

Have never tried what you're doing. Perhaps Export a new clip from AE using a lossless codec, and then use AME on that clip? On Mac, use ProRes, and for PC you can install UT, Lagarith, or Avid DNxHD for instance.
Thanks
Jeff Pulera
Safe Harbor Computers

Similar Messages

Adobe Media Encoder wont preserve widescreen

I have a mp4 file that has a resolution of 640 x 360 pixels.
When viewed in VLC it looks natural and in proportion. I simply
want to convert the .mp4 file to an .flv file for web distribution
maintaining the existing dimensions. I am attempting to do this
with Adobe Media Encoder.
The problem is that Adobe Media Encoder insists on converting
the file to a 4:3 aspect ratio with a resolution of 480x360 pixels.
Viewing the output in VLC results in a squashed out of proportion
image. The output preview in Adobe Media Encoder also looks
squashed.
When I select the option to specify the output dimensions and
manually set the resolution back to 640x360, in then adds to solid
black bars on the right and left-hand sides of the video which is
undesirable - aswell as making the video squashed. I have messed
around with every setting and have had no joy in producing the
output I require.
I have a command line version of ffmpeg which is able to
convert the video successfully (keeping the correct aspect ratio)
using the most basic command: ffmpeg -i input.mp4 output.flv . I
don't want to resort to using ffmpeg at this point. I just spent
$1200 AU to upgrade to CS4 Design Premium and want to use the nice
GUI I just paid for :)
Any help would be appreciated. Has anyone has a similar
problem with AME CS4 (I found at least one instance on the web)?
IMO it is a bug with the software - or a limitation, please tell me
I am wrong!

I am having the same problem, with the same dimensions - 640x360, coming from a very high quality .avi, and not matter how I tweak the settings AME insists on crushing the width down to what appears to be the standard 582px. What gives? I haven't seen any answers to this yet...

Mac Pro restarts with kernel panic error during Adobe Premiere CS6 or Adobe Media Encoder CS6 render/encode.

Multiple times this week, my Mac Pro at work has been restarting during renders in Adobe Media Encoder CS6 and Adobe Premiere CS6. This seems to be specific on this computer only. Identical computers don't have this problem. Here is the system report after it reboots to OS X:
Interval Since Last Panic Report: 252068 sec
Panics Since Last Report:          2
Anonymous UUID:                    7DF9A04B-0693-5FC4-60CF-4BC6ABDB3C1E
Fri May 17 15:37:07 2013
panic(cpu 0 caller 0xffffff8009ab7e95): Kernel trap at 0xffffff8009e1b814, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x00000000000000b8, CR3: 0x000000000c3d3000, CR4: 0x00000000000206e0
RAX: 0x0000000000000001, RBX: 0xffffff8039ebfb98, RCX: 0xffffff800a08eb00, RDX: 0xffffff82413abde8
RSP: 0xffffff82413abde8, RBP: 0xffffff82413abe20, RSI: 0x00000000000000b8, RDI: 0x0000000000000001
R8: 0x0000000000000000, R9: 0x00000000000003ff, R10: 0xffffffffffffffff, R11: 0x00000000ffffffff
R12: 0x000000000000004a, R13: 0x0000000000000371, R14: 0xffffff8040611cb0, R15: 0xffffff80404ec008
RFL: 0x0000000000010206, RIP: 0xffffff8009e1b814, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x00000000000000b8, Error code: 0x0000000000000002, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff82413aba80 : 0xffffff8009a1d626
0xffffff82413abaf0 : 0xffffff8009ab7e95
0xffffff82413abcc0 : 0xffffff8009acd4dd
0xffffff82413abce0 : 0xffffff8009e1b814
0xffffff82413abe20 : 0xffffff7f8bcf4d54
0xffffff82413abe60 : 0xffffff7f8bcf72f1
0xffffff82413abf20 : 0xffffff8009d86e2b
0xffffff82413abf60 : 0xffffff8009a3dcfe
0xffffff82413abfb0 : 0xffffff8009ab2977
      Kernel Extensions in backtrace:
         com.apple.nke.asp_tcp(7.0)[78FAA01C-ABC4-3AD3-8D9A-6187F7911E1A]@0xffffff7f8bce f000->0xffffff7f8bcfbfff
BSD process name corresponding to current thread: kernel_task
Mac OS version:
12D78
Kernel version:
Darwin Kernel Version 12.3.0: Sun Jan 6 22:37:10 PST 2013; root:xnu-2050.22.13~1/RELEASE_X86_64
Kernel UUID: 3EB7D8A7-C2D3-32EC-80F4-AB37D61492C6
Kernel slide:     0x0000000009800000
Kernel text base: 0xffffff8009a00000
System model name: MacPro5,1 (Mac-F221BEC8)
System uptime in nanoseconds: 76945023460235
Model: MacPro5,1, BootROM MP51.007F.B03, 8 processors, Quad-Core Intel Xeon, 2.4 GHz, 20 GB, SMC 1.39f11
Graphics: ATI Radeon HD 5770, ATI Radeon HD 5770, PCIe, 1024 MB
Memory Module: DIMM 1, 4 GB, DDR3 ECC, 1066 MHz, 0x857F, 0x463732353155363446393333334700000000
Memory Module: DIMM 2, 4 GB, DDR3 ECC, 1066 MHz, 0x857F, 0x463732353155363446393333334700000000
Memory Module: DIMM 3, 1 GB, DDR3 ECC, 1066 MHz, 0x80CE, 0x4D33393142323837334648302D4348392020
Memory Module: DIMM 4, 1 GB, DDR3 ECC, 1066 MHz, 0x80CE, 0x4D33393142323837334648302D4348392020
Memory Module: DIMM 5, 4 GB, DDR3 ECC, 1066 MHz, 0x857F, 0x463732353155363446393333334700000000
Memory Module: DIMM 6, 4 GB, DDR3 ECC, 1066 MHz, 0x857F, 0x463732353155363446393333334700000000
Memory Module: DIMM 7, 1 GB, DDR3 ECC, 1066 MHz, 0x80CE, 0x4D33393142323837334648302D4348392020
Memory Module: DIMM 8, 1 GB, DDR3 ECC, 1066 MHz, 0x80CE, 0x4D33393142323837334648302D4348392020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8E), Broadcom BCM43xx 1.0 (5.106.98.100.16)
Bluetooth: Version 4.1.3f3 11349, 2 service, 18 devices, 1 incoming serial ports
Network Service: Ethernet 1, Ethernet, en0
PCI Card: ATI Radeon HD 5770, sppci_displaycontroller, Slot-1
Serial ATA Device: HL-DT-ST DVD-RW GH41N
Serial ATA Device: WDC WD1001FALS-41Y6A1, 1 TB
USB Device: Keyboard Hub, apple_vendor_id, 0x1006, 0xfd300000 / 2
USB Device: Apple Keyboard, apple_vendor_id, 0x024f, 0xfd320000 / 3
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x5a100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0x5a110000 / 3
FireWire Device: built-in_hub, 800mbit_speed

That doesn't look like a complete panic report. Is there any more to it? Regardless, I suggest you run the extended form of the Apple Hardware Test. If it fails to identify a fault, remove the RAM upgrade and test with the original RAM.

Adobe Media Encoder Fails Export from Premiere

AME will not start the render qeue. I have tried Clip notes and different output types. I have embedded After Effects comps in my Premiere timeline. Could that be a cause? This is my first time working with Premiere and AE together.
Error log below:
- Source File: C:\Users\Alex\AppData\Local\Temp\Cosmetics Working_2.prproj
- Output File: F:\Premiere Projects\20090803 Shapiro Cosmetics\From Prem Timeline\Working Copy.pdf
- Preset Used: Custom
- Video:
- Audio:
- Bitrate:
- Encoding Time: 18:16:01
9/17/2009 3:37:39 PM : Encoding Failed
Could not read from the source. Please check if it has moved or been deleted.
- Source File: C:\Users\Alex\AppData\Local\Temp\Cosmetics Working_3.prproj
- Output File: F:\Premiere Projects\20090803 Shapiro Cosmetics\From Prem Timeline\New Pierre Video.avi
- Preset Used: NTSC DV
- Video:
- Audio:
- Bitrate:
- Encoding Time: 18:19:04
9/17/2009 3:40:43 PM : Encoding Failed
Could not read from the source. Please check if it has moved or been deleted.
- Source File: C:\Users\Alex\AppData\Local\Temp\Cosmetics Working_4.prproj
- Output File: F:\Premiere Projects\20090803 Shapiro Cosmetics\From Prem Timeline\Working Copy.wmv
- Preset Used: NTSC Source to Download 512kbps
- Video:
- Audio:
- Bitrate:
- Encoding Time: 18:22:58
9/17/2009 3:44:37 PM : Encoding Failed
Could not read from the source. Please check if it has moved or been deleted.
- Source File: C:\Users\Alex\AppData\Local\Temp\Cosmetics Working_5.prproj
- Output File: F:\Premiere Projects\20090803 Shapiro Cosmetics\From Prem Timeline\Working Copy.avi
- Preset Used: NTSC DV
- Video:
- Audio:
- Bitrate:
- Encoding Time: 18:26:09
9/17/2009 3:47:48 PM : Encoding Failed
Could not read from the source. Please check if it has moved or been deleted.
- Source File: C:\Users\Alex\AppData\Local\Temp\Cosmetics Working_6.prproj
- Output File: F:\Premiere Projects\20090803 Shapiro Cosmetics\From Prem Timeline\Working Copy.avi
- Preset Used: Custom
- Video:
- Audio:
- Bitrate:
- Encoding Time: 18:34:14
9/17/2009 3:55:52 PM : Encoding Failed
Could not read from the source. Please check if it has moved or been deleted.
- Source File: C:\Users\Alex\AppData\Local\Temp\Cosmetics Working_7.prproj
- Output File: F:\Premiere Projects\20090803 Shapiro Cosmetics\From Prem Timeline\Working Copy.pdf
- Preset Used: NTSC Source to 512kbps
- Video:
- Audio:
- Bitrate:
- Encoding Time: 18:36:22
9/17/2009 3:58:00 PM : Encoding Failed
Could not read from the source. Please check if it has moved or been deleted.

Hello, this is terrible problem, which i found in CS 6 softwares ...
solution i found only working, is uninstall and reinstall full package.. but it is not all,
you need to do BRAND NEW admin account in windows, and install it there.
that means, i could not export after repair from encoder in my original account never more (!!)   .. this is really terrible way how to repair this issue, because :
1.by reinstalling of software, client WASTE HIS TIME
2.by necessity to begin work in another windows profile you again WASTE YOUR TIME because of learning and migrating all other profile modifications, which i see really unaccpetable. Adobe means, this solution of repair is ok, and they did not do till today any steps of creating some "clever" solution.
I ask everybody, who will meet this issue in future, guys, please, complain about this situation, give "BUG Report" to them, and write "feature request" to them , in the way of creating some repair tool, which check actual "broken" connections between encoder and premiere, which refuses to "take material" from it and encode, and REPAIR it automatically..
   I am not IT, but ..does it seems so hard to create this ? Adobe IT developers should know their systems, and should create such utility tool really easy.
Steps to reproduce bug:
1. i export anything by button "queue" from premiere to Encoder
2. Encoder will start encoding
3. Encoder does not show the window of media encoding (down left )
Results: sound of sheep occur,
in encoding error file is this reason of canceling the encoding :
01/02/2014 10:10:48 AM : Encoding Failed
Could not read from the source. Please check if it has moved or been deleted.
History of this problem and detailed description, HOW i did "repair" this. With wasting of app 2,5 days of my working time :
1. after repairing "error 5" problem , i solved it by reinstalling the suite from the new admin user profile (profile B) .
I continued my work on my normal working windows profile . (profile A)
Every cooperation (AE+Pr, export media via "queue" to Encoder) was working fine . . .
2. suddenly it stop working (without knowing any possible reason - i did not do installations )
and showed in error export log file :
"Could not read from the source. Please check if it has moved or been deleted."
3.repair via procedure(procedure "a"):
i did this procedure on the profile B (profile from last time installation of repairing problem error 5)
I did these steps :
a-uninstall master coll suite
b-i used Adobe cleaner tool (remove ALL)
c-removed raw directories in locations
•C:\Program Files\Adobe
•C:\Program Files(x86)\Adobe
•C:\Program Files\Common Files\Adobe
•C:\Program Files(x86)\Common Files\Adobe
•C:\ProgramData\Adobe
d-removed these links from registry file
•HKEY_LOCAL_MACHINE\SOFTWARE\Adobe
•HKEY_CURRENT_USER\Software\Adobe
•HKEY_LOCAL_MACH INE\SOFTWARE\Wow6432Node\Adobe
•HKEY_CURRENT_USER \Software\Wow6432Node\Adobe
e-restarted the PC
f- newly installed the Master Coll CS6
g-update the software
result of repair of "3" : problem still exists
4.Ok i find out after coordination with support, it should have been created ANOTHER NEW admin account.
4a:so i did the same procedure (uninstalling) in profile B
4b: and then i created brand new admin profile (profile C)for INSTALLATION of software
4c: restarted the pc (and did not updated it yet)
result :
==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile C) : export WORKS
==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile B) : export WORKS
==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile A) : export DOES NOT WORK ! ! !
(in profile A, is possible to export some raw video material in encoder which is imported to it via "drag and drop)
problem i see:, i have my basic profile A, which i am interested to work, because of all my directory modifications are in there..
this issue should be some "broken" connections between encoder and premiere, which refuses to "take material" from it and encode.
what i expect :
to get from Adobe some repair tool, which automatically checks these connections and repair if necessary, without necessity of founding the new profile and reinstallation of whole software.. this is madness !
what i do NOT expect from Adobe:
to get from Adobe advice of kind : you have to reinstall full software in new admin profile. sorry , we do not know the solution, because we do not know, how do behave our software.

Adobe Media Encoder bug with Cineform .avi

I encoded an HDV m2t file to Cineform intermediate in Sony Vegas. I added that file to Adobe Media Encoder's render cue. No matter what export format I choose, AME fails to recognize the source file's pixel aspect ratio of 1.33:1 and produces a horizontally squashed image.
Even the source window incorrectly shows the file as having a PAR of 1:1. Premiere Pro CS4 won't load the source file properly. I can import it into AE CS4. From there, I exported it to the same Cineform intermediate, and then it works fine in AME.
Why can't AME and Premiere Pro recognize the proper PAR in the Vegas-encoded Cineform file?

I'm not even sure if this qualifies as a "bug". The only thing at issue (if I understand correctly) is that AME is failing to recognize the PAR of the file. AFAIK, there is no "standard" for flagging PAR in AVI files (aside from DV footage, which can have simple boolean 16x9 flag).
Adobe has their RIFF headers -- but this is by no means a standard across the entire industry. There is no indication that your file contains any PAR information whatsoever.
If you open the file in Premiere, you should be able to right-click on the clip in the Project window, go to Interpret Footage and select the correct PAR of 1.333.
The problem is that the standalone version of AME does not have an "Interpret Footage" option to override PAR assumptions for AVI files, etc. that are added to queue. This is a good idea for a feature request for future versions of AME.

"Add to Adobe Media Encoder queue" option very slow

Hello,
The new "add to Adobe Media Encoder queue" directly from After Effects is great, but it is sooooo much slower than encoding directly from Adobe Media Encoder.
My comp is very simple : it's a 90 min. length video that I'm trying to convert from 24 to 25 frames. I need a MPEG2 export for DVD, so I can't use AE because there're no option to export to MPEG2 files in AE.
AME announced 10 hours of encoding, but after 5 hours it was only at a third of completion. So I rendered the movie in DNxHD, then encoded in AME : 1 hour for the DNxHD file, and 4 hours for the MPEG2. Much faster!
I run After Effects CC (12.1.0.168) and AME CC (7.1.0.74) on a windows 7 system with i5 processor and 8go of RAM.
Anybody else encoutered this issue?

Tento wrote:
As for the higher encoding time of exporting to AME frome AE, do you have any clue ?
Have you applied any effects to the footage in your After Effects comp? Are you using time remapping or the Time Warp effect? That will slow down the encode significantly. Also, what is the format of your source footage?
Mind that, depending on what you're asking After Effects to render, encoding a comp via AME may not be as fast as using the Render Queue in After Effects. Feeding frames to AME via Dynamic Link incurs some memory overhead and limitations; for example After Effects can not render multiple frames simultaneously on different processors for Dynamic Link encodes.
If I were you, I would try to solve the problems with AME transcoding your footage. You should bring the issue to the AME forum. If you're fully committed to not using AME, I recommend using Premiere Pro, not After Effects, for this type of job.
Regardless of all the above, I agree with Rick: you shouldn't need to transcode 24fps footage to 25fps for playback from DVD. DVD players will do that frame rate translation for you at playback time. But if your footage is not PAL dimensions (720x576), a DVD player won't necessarily convert the frame size, so transcoding at least the frame size is recommended. Bottom line: I would let your DVD authoring software (Encore?) handle the original file; it should do any conversions necessary when you set the DVD format to PAL.

Adobe Media Encoder CS5 doesn't work anymore (WHY? WHAT's WRONG?)

The system I use is Adobe Production Premium CS5.
I have often used Adobe Media Encoder CS5 started from the export of a film sequence in Adobe Premiere Pro CS5.
On the 31st of December 2013 my computer crashed and dumped more or less at the end of a process of Adobe Media Encoder CS5. There was no complete output.
Since then this program Adobe Media Encoder CS5 cannot start up anymore.
It stops at the start-up saying that the program does not work anymore and that there will be looked for a solution. But then it finishes saying that it will be reported if a solution becomes available in the future.
I have tried the following:
- Run Adobe Media Encoder CS5 (exe) from directory C:\Program Files\Adobe\Adobe Media Encoder CS5 => same problem.
- Stop security control AVG while not online with internet => run Adobe Media Encoder CS5 => same problem.
- Reinstalled complete Production Premium CS5 suite => same problem.
- Removed complete directory C:\Program Files\Adobe\Adobe Media Encoder CS5 and then reinstalled Adobe Premiere Pro CS5 => the full directory C:\Program Files\Adobe\Adobe Media Encoder CS5 with contents was there after the install, but subsequent running of Adobe Media Encoder CS5 => same problem.
- Removed complete contents of D:\mediacache\database\Media Cache and D:\mediacache\Media Cache Files => same problem.
What more can I do ??????
I would be very grateful for a solution.
Regards, Arie de Jong, Rotterdam

Hi Jim,
Thank you very much for the suggestions for a solution. First I considered
re-installing Win 7 Pro, because I did not have a fall-back point
predefined. So I could not try to reload a previous system environment. But
for your information the following.
Yesterday my son suggested that there could be some corruption in a control
file of Adobe Media Encoder, because re-installing that program did not
give a solution. Obviously that then would have to be a file which is not
affected by a program re-install.
What he then did for me is to remove directory
Users\owner\ AppData\Roaming\Adobe\Adobe Media Encoder (he actually
renamed it to hide that directory for Media Encoder).
Thereafter we ran program Media Encoder from Premiere. The result was that
a new directory ......\ Roaming\Adobe\Adobe Media Encoder with proper
control files was automatically generated and the problem was solved.
Regards from Arie de Jong

What happened to Adobe Media Encoder???

Adobe Media Encoder has disappeared from the CC list of apps available, and I need to reinstall. What happened to it?

I have Windows 7, HP elitebook 8560w laptop - my video drivers crashed, which caused problems with any software that used them. So I've been uninstalling, and re-installing apps but Media Encoder is no longer in the list on my CC desktop app.
I looked at my video box (also win 7, an HP z820 tower, not a laptop) and it's not on the list in the CC app for that one either. That box is fine, no issues, and media encoder is installed, but it does not show up in the list of installed apps.
Was there a change that does not let you install Media Encoder as a seperate app? Does it now only come with other CC video apps?
thanks for your help!

Long load times normal for Adobe Media Encoder from Premiere CS5?

When I export a sequence from Adobe Premiere CS5 using Adobe Media Encoder, the system freezes for several minutes before giving me the exporter screen. Then, when I've loaded my settings and clicked "export," the system again freezes for several minutes before beginning to encode. I'm using a system with an Intel I7 CPU 930 @ 2.80Ghz 2.80 Ghz., 24 GB of ram, Windows 7 Ultimate 64 bit operating system and an Nvidia quadro FX4800 graphics card.. Everything else is fast, but AME is slow. Is this normal? Should I reinstall AME?

Not sure what you mean about the process. From Premiere CS5, I click on "export" which brings up a menu. I select "media" from the menu which brings up the Adobe Media Encoder. I adjust my settings and click "export" from the bottom of the screen to immediately render the Premiere file. Clicking "Queue" would put the program into the AME Queue. Am I missing something? On the slowness issue, looks like I need to reinstall AME. I've been reluctant to do that, partially because I'm using some Matrox hardware and I'll have to reinstall the Matrox softare to populate the matrox settings into the media encoder. Looks like it may be worth it.
Thanks.

Adobe Media Encoder CC 7.2.0.43 still crashes after beginning of encoding - bugs for months now!

Adobe Media Encoder CC 7.2.0.43 is still crashing after beginning of encoding! In my case this bug exists for months now and Adobe is not able to get rid of its own programming faults! The user pays a lot of money for the license and doesn't get a functioning software! I spent days to get a solution now, but NOTHING of your suggested help works!
This is my 'support' history beginning in AUGUST (!):
Sent: Thursday, August 15, 2013 ...
Subject: Bug Report
Product: Adobe Media Encoder
Product Version: CC
Operating System : Windows 7
OS version: Service P1
Concise problem statement: Steps to reproduce bug:
1. Go to Premiere Media Export
2. Stating Media Export Parameters for ME
3. Starting ME
4. Define video title and path
5. Start Media Encoder CC rendering
6. ME states 'Preview not available'
7. Rendering aborts after about 15 sec.
8. Media Encoder CC crashes, no matter which kind of video! Every time.
9. Direct 'Export' from Premiere CC is possible with all the same parameters, but CC AME crashes!
10. Also installed Premiere CS 6 Media Encoder WORKS without any problems, but not the CC Media Encoder!!
Expected results: Media Encoder CC WORKING. This is still my expected result as a paying customer!
My steps to solve these problems (with Adobe's help) were / are:
- Cleant every suggested media cashes.
- Tried to render the sequences also without audio.
- Tried to render as one pass.
- Even if I try just to export ONE simple standard SONY PMW EX1 mp4 file which should never cause problems it chrashes, also without audio.
- Also if I clean all preferences and caches before, EVERY file type crashes, no matter if I try to export a video or a still picture.
- This is not happening in Adobe AME CS6 with the same files, but in CC!! CS6 still renders reliably with preview, but CC crashes without being able to show any preview.
- Held the Shift key down while starting AME. This should reset preferences and so on...
- Deleted suggested "7.0" directories as described in other forum posts concerning this topic.
- Logged out of my CC account.
- Deinstalled and reinstalled PPro, After Effects, InDesign, Flash, using Adobe Creative Cloud Cleaner Tool. All is the newest version 7.2.
- Set GPU renderer to "Software Only". Some video cards have issues when GPU is set to "OpenCL" or "CUDA".
- Checked updates available for video driver. Latest is installed.
- Turned off "Enable Native Premiere Pro sequence import" in AME prefs.
- AMEEncodingErrorLog.txt doesn't have any content, not a single line.
NOTHING WORKED OR HELPED!
Windows Crash log: WER3A92.tmp.WERInternalMetadata.xml:
<?xml version="1.0" encoding="UTF-16"?>
<WERReportMetadata>
    <OSVersionInformation>
        <WindowsNTVersion>6.1</WindowsNTVersion>
        <Build>7601 Service Pack 1</Build>
        <Product>(0x3): Windows 7 Home Premium</Product>
        <Edition>HomePremium</Edition>
        <BuildString>7601.18247.amd64fre.win7sp1_ ... private data erased here ...</BuildString>
        <Revision>1130</Revision>
        <Flavor>Multiprocessor Free</Flavor>
        <Architecture>X64</Architecture>
        <LCID>1031</LCID>
    </OSVersionInformation>
    <ParentProcessInformation>
        <ParentProcessId>9168</ParentProcessId>
        <ParentProcessPath>C:\Program Files\Adobe\Adobe Media Encoder CC\32\dynamiclinkmanager.exe</ParentProcessPath>
        <ParentProcessCmdLine>"C:\Program Files\Adobe\Adobe Media Encoder CC\32\dynamiclinkmanager.exe"</ParentProcessCmdLine>
    </ParentProcessInformation>
    <ProblemSignatures>
        <EventType>APPCRASH</EventType>
        <Parameter0>Adobe Media Encoder.exe</Parameter0>
        <Parameter1>7.2.0.43</Parameter1>
        <Parameter2>52a18991</Parameter2>
        <Parameter3>libmmd.dll</Parameter3>
        <Parameter4>12.0.12.2</Parameter4>
        <Parameter5>5073ba44</Parameter5>
        <Parameter6>c0000005</Parameter6>
        <Parameter7>00000000000bfd76</Parameter7>
    </ProblemSignatures>
    <DynamicSignatures>
        <Parameter1>6.1.7601.2.1.0.768.3</Parameter1>
        <Parameter2>1031</Parameter2>
        <Parameter22>4c50</Parameter22>
        <Parameter23>4c50fbaed87d7d2a6adc173c5da6a755</Parameter23>
        <Parameter24>28b8</Parameter24>
        <Parameter25>28b834131666732fe13a476b5fa8febe</Parameter25>
    </DynamicSignatures>
    <SystemInformation>
        <MID> ... private data erased here ... </MID>
        <MarkerFile>1043_ASUSTEK_G74SX_V20_WIN7</MarkerFile>
        <SystemManufacturer>ASUSTeK Computer Inc.</SystemManufacturer>
        <SystemProductName>G74Sx</SystemProductName>
        <BIOSVersion>G74Sx.203</BIOSVersion>
    </SystemInformation>
</WERReportMetadata>
Adobe team, I'm at my wits' end now and don't know how to continue. Can you help me?

https://www.youtube.com/watch?v=oJ0hz9JkLgM

Adobe Media Encoder CS6 Random Crashing Mid-Render

Hello -
I've been dealing with this issue for enough months and across enough computers to finally seek out some advise here, hope it works out...
Basically I've got a 2 hour long film that I've been trying to export using Adobe Media Encoder CS6. It's never made it all the way through. I can usually skim through the generated quicktime file up to the point where the crash occurred. I've tried using that as a reference to check out my sequence in Premiere but there is never anything suspicious going on there. Most frustratingly the crash occurs randomly. Sometimes it will go through 10 minutes of the film; sometimes an hour. Regardless I get a crash with a report that has no specific information.
Footage:
r3d - Various resolutions, all being cut in a 2048x1152 sequence.
Quicktime mov - ProRes4444 for the most part.
Machine(s):
I had been attempting to render this for the past few months with a Macbook Pro running OSX 10.8.4 w/ 16GB RAM, 2.7 GHz Intel i7, NVIDIA GeForce GT 650M 1024MB - never made it through a render longer than 50 minutes of the 2 hours.
We recently got one of the new 2013 Mac Pro systems running OSX 10.9 w/ 16GB RAM, 3.5 GHz 6-Core Intel Xeon E5, AMD FirePro D500 3072 MB
The hope was that this new powerful machine would overcome the issues we were running into with these renders. Since I'm posting this now you can probably figure out that it didn't really work out that way...
Software:
AME- 6.0.2.81
Premiere - 6.0
I know there are updates to be used here, but whenever I update Premiere from just 6.0, the project itself becomes a buggy mess, crashing constantly. I also run Creative Cloud and have tried to just jump over to Premiere CC hoping all my problems would vanish, but instead, I again get a buggy project that constantly crashes. The only version of Premiere that seems to work with this project is 6.0, so general updates have not been useful (and instead damaging, I've wasted several days trying everything I possibly can to make the project work in the updates).
Any help appreciated. Thanks.

Thanks for the reply MMeguro.
Last night I was able to get my first full render through by doing a combination of things (so I'm not sure what did the trick in the end).
To answer some questions first, never attempted to do the FULL render directly out of Premiere, always switched over to AME for that, so that potentially could work too. Smaller renders have worked directly out of Premiere Pro, but they've also worked out of AME.
The initial render attempts that had been failing for the last few months were on the MBP which did not support GPU accleration due to an incompatible graphics card. I assumed the issue must be tied to something else because of this and was using it on the renders with the new 2013 Mac Pro. Using the workflow of Pr6.0, AME 6.0 and GPU rendering turned ON, I was failing to render to both Quicktime h264 and ProRes 422.
What worked for last night's render:
1. Convert Pr6.0 project to PrCC project (when I've done actual editing in CC after converting this project it tends to crash, but I figured just generating the project itself without doing any editing in it might satisfy what I was attempting to do).
2. Open AME CC and import PrCC Sequence. Used custom ProRes 422 setting.
3. Turned OFF GPU acceleration.
So as long as I the PrCC project I create stays stable long enough to save it (without crashing, which has been a problem with that Pr6.0 to PrCC conversion) then it seems like this will work. Kind of an annoying couple extra steps but I'm just out of my mind glad that I can actually render this thing finally. We're still in the rough stages so being able to turn around a review version within a day is very important.
Wish I could do more tests to figure out exactly which combination actually made this work for the benefit of others, but can't afford to do multiple 10 hour+ renders with random crash times.
Anyway, thanks again for the reply MMeguro much appreciated.

When I add my composition to the Adobe Media Encoder from After Effects, it renders out incorrectly?

Why is it that when I add my composition directly from after effects to the adobe media encoder, it renders out of the adobe media encoder incorrectly? By that I mean the video comes out a little scrambled- parts of it overlap other parts. Is this an issue with 'dynamic link'? Did I do something wrong? I'm working in CC.

I also don't understand what you are saying. What do you mean by "parts of it overlap other parts"? A screen shot might help.
What were your render settings in AME? (Format, Codec, data rate, etc.)
What is in your AE comp? If footage, tell us what format, codec, etc. Tell us what effects were used too.
What exact version number of AE CC are you using?

Queuing from Premiere Pro to Adobe Media Encoder no longer working? CS6

Hi there,
Just very recently adobe media encoder has stopped accepting que's from premiere. I choose export in premiere, setup the export details and hit que, adobe media encoder launches, but then it flashes once (like disappears reappears, very quickly) and then it just simply does nothing. No item appears in the que. I have tried opening the premiere sequence directly from adobe media encoder but it does nothing either. If I drag the premiere project directly onto a preset in adobe media encoder, it crashes every time. (though not sure if it would of done this previous to my problem arising)
Anyway, very frustrating as I usually work on a different project whilst media encoder is rendering something out. Now i'm stuck with huge down times as I wait till the render is finished.
Recently updated to Mac OSX 10.8.3 - I think this is when the problem began.
Just updated the CUDA driver to 5.0.45 but this has not changed anything.
Working on a Mac Pro 5,1, 2x2.4Ghz 24GB RAM, EVGA GTX 660 FTW,

Some suggestions and answer at least the 16 questions at the end of the Wiki article.

30 Second Audio Render problem in Adobe Media Encoder?

I've been trying a few things out to fix this, but no luck.
Ok, so I export videos with a audio spectrums where audio would be necessary. Now I want to do this all in After Effects without editing the Audio in in Premiere Pro. After Effects does not render in H.264. So I send it Adobe Media Encoder. When I export to AME, the first 30 seconds is mute, without fail. only on AME though. I can export straight through AE with .mov and it works fine. but I don't like doing that with the large filesize. I also did this with WebM. Audio does not export for 30 seconds on AME.
I like to send everything to AME. So if I have to go to premiere to fix audio I will. so after fixing everything I send it over to AME and let it export. for some reason, it WILL give me audio. Is there something wrong with my settings in AE or AME?
Everything is CC if that helps any

OK, give this a shot.
FAQ: Why are some codecs and sequence presets missing from my installation of Premiere Pro?

Twixtor plugin doesn't render using Adobe Media Encoder

Hello, I'm having a weird case here with Twixtor 5.0 and Premiere CS6.
First I was getting the orange screens rendering a sequence with twixtor in it. Them I read the solution for it, that is: "The seuquence have to be the same setting as the clip with twixtor applied"
So I did it, and profit! It was working. I fixed all my sequences, and send to Adobe Media Encoder. After I burned the DVD with the MPEGs AME created, the orange screens were there again.
If I export straight from Premiere, the video is fine! No orange screens, but if I send the sequence to AME, or even import it straight from AME, the video will have the error.
Please, can someone help? There's a lot of chapters, and I don't want to render one by one trough Premiere, I could even put everything in one final sequence, but them I don't know if the final MPEG would save the chapter marks I would have to create in it...
I really like AME, and want to use it
Thanks!
P.S:
Windows 8 PRO
Premiere CS6 6.0.3
Twixtor V5.0

If you set Encore chater markers in PP, name them and export out using MPEG2-DVD, they will carry over to Encore.

Adobe Media Encoder wont Render from Beginning

Similar Messages

Maybe you are looking for