Adobe menu: Is it possible to duplicat it?

Hi folks!
I've always been impressed by the way the Adobe menu (like
the one on this page) looks like.
Now, with DW CS3 and spry, is it possible to duplicated it?
Thanks!
Sergio

I played around one day a few months ago and made a spiffed
up version of
Adobe's menu - but I made it using our Pop Menu Magic. Feel
free to analyze
the CSS:
http://www.projectseven.com/csslab/doobie/
Al Sparber - PVII
http://www.projectseven.com
Extending Dreamweaver - Nav Systems | Galleries | Widgets
Authors: "42nd Street: Mastering the Art of CSS Design"
"Sergio B" <[email protected]> wrote in
message
news:feq9sc$k0i$[email protected]..
>
quote:
Originally posted by:
Newsgroup User
> Sure. You'll just need to edit the menu CSS to create
the effects and look
> you want.
>
>
> Thanks, but since I am just starting on CSS, is there a
place where I can
> start looking for pointers?
>
>
>
>

Similar Messages

Is it possible to duplicate a row in a table and the values entered by u

PDF LiveCycle Designer : Is it possible to duplicate a row in a table and the values entered by the user?

[Move to LiveCycle Designer]

With adobe standard, is it possible to create a fillable document that can be saved and used repeatedly as a fillable doc

with adobe standard, is it possible to create a fillable document that can be saved and used repeatedly as a fillable doc

Hey Paul,
Please let me know what version of Acrobat Standard are you using.
Regards,
Anubha

Using Adobe Acrobat - Is it possible to execute JavaScript to report to LMS to track pdf was viewed?

Question: Using Adobe Acrobat - Is it possible to execute JavaScript to report to LMS to track pdf was viewed?
What I would like to do is to create a pdf with an Acknowledgement button that when click will report (via JavaScript) to the LMS (Learning Management System) that the end user viewed/acknowledged the pdf.
Can this be down with JavaScript in this fashion?

Thanks, (My fault, as I should have specified this.) Due to legacy reasons I need to use ie, and so I can't use the PrintPdf firefox plugin. So from reading the rest of that thread, the best method does seem to be to get hold of a copy of acrobat, and add a Print() script in each file, and open it in a new tab.
At least it gives me somethigin to try anyway :-)

Even if we have bought the advance version of Adobe FormsCentral, is it possible to receive via e-mail the completed form in .pdf? If not, is it possible to develop this option? How much would it cost?

Even if we have bought the advance version of Adobe FormsCentral, is it possible to receive via e-mail the completed form in .pdf? If not, is it possible to develop this option? How much would it cost?

I know of no way to do this with Reader or XML.

Is it possible to duplicate a profile in profile manager

I am just wondering if it is possible to duplicate profiles in profile manager.

You may not need to
Please check this link
https://help.apple.com/serverapp/mac/4.0/#/apd0E2214C6-50F0-48C9-A482-74CEA1D77A 9F
There is a baseline that can be set.
About Profile Manager
"Each user, user group, device, and device group can have configuration profiles to provide a base level of settings. You can then assign additional configuration profiles to customize the settings to meet your needs"
I hope that helps

Germany, USA, France. 10 Licenses Adobe CC, is it possible and legally allowed to share them ?

We are an international company with branches in Germany, USA, France. the branches are individual companys, in Ger GmbH, in F SAS ind USA INC. If we want to use for example 10 Licenses Adobe CC, is it possible and legally allowed to share them over the three branches?

The Licenses can not be shared between countries. If I am correct the I assume you would like to buy 10 CC seats& use them worldwide. For this you can go for CC for Team & assign seats as per your choice.
Regards
Rajshree

Is it possible to duplicate an item in the project panel with scripts?

Hey all, I'm trying to make a script that will duplicate an item in the project panel. I know you can duplicate an item in a comp, but I'd like to duplicate a project Item...app.project.item(2).duplicate();
Something like that, is it possible with some other coding to do that?
Thanks

Dave, I'm trying to duplicate in a script running inside AE. I guess I could try to do a system command to duplicate, but I'd really like to do it inside AE so I can keep track of the new layer.

Adobe Muse: Is it possible to create a Social Network type website using Muse?

Hey everyone,
So ive recently came up with what i believe to be a pretty nifty idea for a social network type website, but i was just wondering is it possible to create such a website using muse? Ive created a few websites with it but never integrated features such as profile pages for users, searching options and other common things found on a few of the more well known sites such as Facebook, Twitter and so on. I dont really want to say what my idea is for obvious reasons, but if anyone knows if you can create a social network style website using Adobe Muse that can incorporate these such features, Id love to know. and if so can you point me in the direction of how to go about it, or to some instructional videos or sites that will help me out. thank you so much everyone,
Callum

Hi Prabha Sharma,
I am afraid that at this stage this is not possible via Muse as that requires server side coding. You can start off creating a skeleton/template for your social networking site via Muse and then use that further with your own custom code. however, I will not recommend that you continue making your site with Muse as you will face issues in altering the muse generated code.
- Abhishek Maurya

Is it possible to duplicate (new and existing) events and paste them into a new calendar automatically?

I have four google calendars connected to my mac via CalDav, and i need to have all the events in all those four calendars into a new one also in google calendar. So, i want to know if it is possible to configure an automator action or an applescript that duplicate events (the old ones and the new events i'll create) of some calendars into a new one. It would be like grouping some calendars to create a new one, without deleting those calendars, do you understand? Is it possible? I want to made this as transparent for me as possible, automatic.
Thanks for helping! and sorry about my english

If you are importing from a CD, you can tell iTunes not to automatically import the CD (Edit->Preferences: When you insert a CD: Ask to Import CD). That's what I do. I then edit the track names and album artists to be what I want before I import the CD. After the import is done, I go back to the CD (by album name in the search bar) and correct the album art.
The other way (which is what you need to do if you are downloading digital files, such as Amazon MP3) is to remember the "Recently Added" playlist. That's a subset of albums added in the last few weeks, so it presumably should be easier to find the new albums. Again, you can go there and edit the information.
If "Recently Added" is still got too much, you can edit the smart playlist to shorten the time period and create a "Really Recently Added" Playlist.
I'm familiar with managing music in large libraries: I've been recording from LP into my iPod this week (plus adding some CDs I had forgotten about), and currently have 26878 tracks.

Is it possible to duplicate a button, instead of building a new one each time (navigation)

In CS5...
I have created a movieclip button which is animated for all the states I need (up, over, out, etc.) it's made up of text, which is in a movie clip where I have my animations created (actions layer with AS3 script, my txt movieclip layer, my hit layer) and then that is inside a movie clip in my main scene.
Is it possible to copy that button, so then change the text, Actionscript, instance name, etc?
I tried copying the layer (by selecting the frames and copying frames, and pasting to new layer) but when I make any changes, it changes both copies!
Can someone tell me an easy workflow so I don't have to build each button from the ground up each time?
Thanks all!

Ned Murphy wrote:
Select the textfield that is inside the movieclip and in the properties panel you should see a dropdown for selecting the type of textfield. If you select Dynamic and then assign an instance name to the textfield you can use that instance name in your code to assign the text when the file runs. If you were to name the textfield "tField", then the code you would use inside an instance of your movieclip named "mClip1" would be...
mClip1.tField.text = "your text";
So, if I have multiple buttons, using your example, would the code read
mClip1.tField.text = "your text";
mClip1.tField2.text = "your text2";
mClip1.tField3.text = "your text3";
mClip1.tField4.text = "your text4";
And my buttons are built inside movieclips, ie
Main Timeline > aboutButton_mc > aboutText_mc > "about"
> contactsButton_mc > contactsText_mc > "contacts"
can the code be put at any level, or does it need to reside on the Main Timeline to access all the movie clips' text fields?
Just in case this may be too complex to get into via this forum, if you know of any good tutorials, that would be awesome too!
I tried doing a search, but it's so hard to tell if they might be in AS2, or AS3, and if they would apply to newer versions of Adobe Flash (I have CS5)

Selection Menu for VM, possible?

Hi all,
I pretty new at this, but after weeks of trial and error, I am able to get the SRSS 4.2 and ESX4U1 to display my vm desktop to a DTU. Now I want to dig a little deeper.
Question, is it possible in SRSS 4.2 to be able to create a "selection menu" when the DTU connects to the server? What I want is this, when a DTU or card session is connected to the server it will display a "selection menu" of all available vm for the user to choose which vm they want to start up. I am currently in an environment that the user will need to use multiple vm and it would really help out if we could present to the user with a "selection menu" to choose from.

Did you look at using [Sun VDI|http://wikis.sun.com/display/VDI3dot1/How+to+Access+Desktops+Using+a+Sun+Ray+Client+%28with+a+VDI+Desktop+Selector%29] instead of plain SRSS?

Menu Text Rollover Possible?

I am a classical musician, and I'm creating a DVD of my work to send out to managers and potential sponsors. Towards that end, I've put together an iDVD project using the "Reflection Black" Theme provided within iDVD. For the most part, I'm quite happy with the results, however I am concerned that the way I've got my three musical selections laid out is not foolproof from a user navigation point of view. For a button shape, I'm using the leftwards-pointing arrow (from the Bullets sub-menu in the Buttons section). Here's how my menu of video-recorded musical selections is laid out, using the "greater-than" symbol as a stand-in here:
1. Brahms
2. Berlioz
3. Beethoven
My concern is that when the main screen comes up, the viewer will see these three composer's names, but not necessarily immediately understand how to access the three musical selections. If the user drags the pointer in the precise area of the buttons, they do appear in order, which I think indicates fairly clearly how to make the selection "hot" and thus "selectable". But I'd like users to be able to select the menu items without having to point to such precise spots, or at least find a way to indicate exactly where they should point. In this latter regard, I tried putting a "box" of text underneath the list of composer's names, saying "Click next to composer's names to play selections", however this didn't work well with the way the opening screen of the theme rolls out. The theme roll-out is rather nice; it starts with the video I've put in the drop boxes cascading by, then my name fades into view, and then the composer's names fade into view. But when I include the box of text, it appears on screen right away with the scanning drop boxes, before my name and the composer's names transition in.
The format I'd like to see, if possible, is for the composer names to change color and/or enlarge when the pointer is rolled over the composer names, like a standard hyper-link in a web page. But any and all ideas and suggestions are welcome. Thanks.
Tony

First off, the hyperlinks on web pages are much more advanced than what is allowed in the DVD specs.
With DVDs you have an overlay that contains the changing part of the buttons, in this case the "greater-than" buttons. The overlay is very limited. There is only two levels of anti-alasing. This means that any sort of curve (type has a lot of curves) is going to come out very "jagged". This is why on DVDs that you might own/rent, they never highlight the text in the button. Typically, you will see either an underline or some sort of simple graphic next to the text. Go rent a movie tonight, any movie, and you will most likely find thats true.
Now with DVD SP, you can highlight the text, but as mentioned above you really do not want to do that.

After Mavericks update spotlight search menu gone, not possible to use spotlight at all

Hello,
I updated last week to Mavericks and since the update Spotlight is completely gone.
It's not possible any more to get to the spotlight search at all. I checked the Spotlight in the preferences the keyboard short-cuts (apple default) are still enabled but nothing happens.
Even the spotlight magnifier icon in the menu bar is not there any more.
Can anybody help?

Some of your user files (not system files) have incorrect permissions or are locked. This procedure will unlock those files and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Back up all data.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Enter the following command in the Terminal window in the same way as before (triple-click, copy, and paste):
sudo find ~ $TMPDIR.. -exec chflags nouchg,nouappnd {} + -exec chown $UID {} + -exec chmod +rw {} + -exec chmod -N {} + -type d -exec chmod +x {} + 2>&-
This time you'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button
Select
 ▹ Restart
from the menu bar.

In Adobe Forms, Is it Possible to remove File Attachment Link of Navigation

Hi all,
I have devoloped an application for Adobe Form. It is working Properly.
In the Output, I want to REMOVE File Attachment Link in Navigation Pane. Is it Possible to do that?
I know that we can completely hide Navigation Pane, but i need to remove only file attachment.
Thanks in Advance
Malla

Hi Malla,
To my knowledge, this is not possible. You can hide/show the entire toolbar. But not a specific item for security reasons.
Check out the following link
http://www.acrobatusers.com/forums/aucbb/viewtopic.php?id=7845
Regards,
Mathan

Adobe menu: Is it possible to duplicat it?

Similar Messages

Maybe you are looking for