Adobe MUSE. Logo not showing when full screen slide show is above header...

In Adobe Muse.
When I set the homepage slide show to 100% width and bring it full bleed to the top of the page, the logo gets covered up. Everything else shows, the tabs and fly outs, but the logo disappears. The only difference is the logo is a GIF file. Anyone know what I am doing wrong?
The GIF is set to be the top object and is pinned to the top left corner.
Any help is appreciated.
-Bobby

Hi,
Kindly add a new layer (via the layers panel), move the logo to this new layer; and ensure that this layer is on top of the rest.
Hope that helps,
Sonam

Similar Messages

  • Bug in full screen slide show: Speed-values under 1.0 don't work, they will be zero. Maybe a german problem because of ","?

    I wan't to do a full screen slide show with changing images under one second. But this doesn't work because every value under 1 will be 0. Maybe this is a german problem because we use "," instead of a ".". But I can't use ".", the field doesn't allow this. Is there a workaround or a bugfix?
    Thanks

    With any SSD, step #1: make sure the firmware is current.
    How you clone or install the OS also can differ.
    Linc has a 2008 and 10.8.2 but then I would expect his system to be rock solid. Same cannot be said for more than a few 3,1 owners that... all the issues with power management and panics vanish if they go back or dual boot and keep both, when they use 10.6.8 instead. And of course ML and Lion dropped support for PowerPC code, drivers - a good reason to do a clean install and not carry any older apps, drivers and plugins with the new system.

  • Reading the older questions, is there a way in which the full screen slide shows can be saved and/or exported?

    Reading the older questions, is there a way in which a full screen slide show (such as places or geotagged photo's) can be saved and/or exported for viewing by another party?

    Yes. Just export the slideshow and select your preferred output size.
    Regards
    TD

  • Full Screen Slide Show and Full Width Object Odd Behavior

    This look slike a bug to me. It happens in both the shipping version and the new native beta version of Muse.
    I made a full screen slideshow. Put a full, browser-width rectangle at the top of the page for the Nav Bar. Rectangle is 75 pixels deep and touches the top of the browser.
    Preview in browser, all is well.
    Now, put a horizontal menu on top of the rectangle and set it to be also 75 pixels tall. Preview in browser and the full-width horizontal rectangle disappears. Make it not full-width, and it comes back.
    If you can't re-produce this, I can post my page on Business Catalyst or send a file to Adobe.

    By default iWeb resizes your images to no more than 800X600. They playback in a window.
    If you want viewers to see the full size images you want to make a "Photocasting" page.
    http://www.apple.com/ilife/iphoto/features/photocasting.html

  • I embedded some HTML code into adobe Muse but not displaying when the pages are Exporting to HTML

    I embedded some HTML code into adobe Muse and when I published the remote site on business catalyst the (Add This widget) HTML code shows up but when I exported the site to HTML pages and view the index page in the browser (Safari, Chrome, Firefox) the (Add this widget) HTML code wouldn't display on any of the pages. I've used this code before on other Muse sites not sure what could have happened. Thnx!!!

    Hi,
    Please take a look at this post for a similar discussion : Re: When i export my muse website my youtube video links stop working. Why is this?
    Regards,
    Aish

  • Full Screen slide show not functional since upgrading Graphics card??

    Just upgraded to a geforce fx 5200 graphics card...now the individual full screen pic or the full screen slideshow will not function. Get Fatal Error C0000005 at Address: 6e310c01. Dumps me out of Photoshop album starter edition 3.0. I have about 1000 images in multiple groups, files, email shares, etc and need to be able to get back to functionality. This has occurred since installing the graphics card mentioned. Is the newer 3.2 version an "upgrade" to 3.0. If I download it will it overwrite the existing version and still have all of my photos in place? It's an option I am considering to try to get back to properly functioning. ANY I repeat ANY help would be appreciated...THANKS....

    I have a Geforce FX5500 card & updated the driver for it, why I have no idea! Anyway the slideshow came up with some sort of major error & as I already knew using bang up to date graphics card driver stops certain old games working I rolled back the driver from the 23/4/08 (approx) version to driver version 6.14.10.9371 dated 22/10/06. Different card I know but an older driver may sort it.
    Les

  • Can you embed a video in a full screen slide show?

    Is that possible? I've seen similar effects in a few muse templates on Themeforest.
    Any direction on this would be great!

    Hi
    We cannot insert any content in slideshow other than selecting image from add options.
    For full screen video , please refer to these links :
    http://www.muse-themes.com/blogs/news/11849413-video-backgrounds-in-adobe-muse-new-widget
    http://www.musegrid.com/adobe-muse-tutorials/how-to-use-the-use-the-fullscreen-video-backg round-widget-for-adobe-muse
    Thanks,
    Sanjit

  • Full screen slide show?

    How do I display photos full screen on a photo page created in iweb and published to .mac? No matter how I size the photos in iphoto they display too small in a web browser after clicking on "start slideshow" on the created web page.

    By default iWeb resizes your images to no more than 800X600. They playback in a window.
    If you want viewers to see the full size images you want to make a "Photocasting" page.
    http://www.apple.com/ilife/iphoto/features/photocasting.html

  • Adobe Muse keep "Not responding"

    Hi,
    I'm doing another website project, and after a while my adobe muse seems not responding when i clicked the preview button, or when I try to publish it to BC domain. My muse file is 379 MB. Is it because it's too big? Thank you for your help and time.
    Kind regards,
    Praditya

    When I open a particular Muse file, it's just stuck. Muse stops responding. So i decided I wait till it starts working again.
    After exactly 16mins, it opened, but any action I do, it's stuck again.
    I thought it was because it had 30+ subpages But it works perfectly fine on my friend's mac (same configuration as mine).
    It is really weird. And it was working fine a day ago.
    Any help would be appreciated.
    Thanks
    Vig

  • When I am using safari I do not have a full screen

    when I'm using safari I do not have a full screen, the top is blank

    This is what "full screen" Safari looks like. If you swipe up on the web page, the tool bar disappears. Pull down on the page to get the toolbar to show again. You are not seeing this?

  • Hi, my iphone its in recovery mode and when i restore my iphone 5s loading show the blue screen and show note on itunes (unknown error 14) please i need your help please . thanks

    Hi, my iphone its in recovery mode and when i restore my iphone 5s loading show the blue screen and show note on itunes (unknown error 14) please i need your help please . thanks

    In the article Resolve iOS update and restore errors this is what it says about error 14:
    Check your USB connections
    Related errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4005, 4013, 4014, or “invalid response."
    If the USB connection between your device and computer is interrupted, you may be unable to update or restore.
    To narrow down the issue, you can also change up your hardware:
    Use the USB cable that came with your device, or a different Apple USB cable.
    Plug your cable into a different USB port directly on your computer. Don't plug it into your keyboard.
    Try a different computer.
    If necessary, resolve any further issues with the USB connection, then with your security software.
    If you're still seeing the error message, check for hardware issues by following the next section.

  • Edited photos not showing in full screen

    I have edited some photos (crop and/or colour adustments). Although the thumbnail is still visible, it will not load in full screen mode - I'll only see a gree square with an explanation mark.
    Even more annoying, a photo book I'd ordered came with grey spaces: again the thumbnail appeared allright, but if I click to view the page I get this screen picture holder. I'll have to ask for a reimbursement, but in the mean time, I'd like to know what to do.
    thanks in advance

    I have edited some photos (crop and/or colour
    adustments). Although the thumbnail is still visible,
    it will not load in full screen mode - I'll only see
    a gree square with an explanation mark.
    Even more annoying, a photo book I'd ordered came
    with grey spaces: again the thumbnail appeared
    allright, but if I click to view the page I get this
    screen picture holder. I'll have to ask for a
    reimbursement, but in the mean time, I'd like to know
    what to do.
    thanks in advance
    I'm having some trouble posting. Sorry for my last post with only original message showing and my comments missing.
    I am having trouble with full screen also but not quite the same. I cannot get a previosly edited photo to show full size on the full screen. It only transfers in the same small size as it is in the Library source screen even though I clk on the preference for "edit in full screen." Any idea what is wrong?
    iMac A1173   Mac OS X (10.4.6)  

  • My doc does not show on full screen, how to project it to full screen?

    The Word document which I want to amend does not show on full screen, how to get the doc to full screen?

    Doc shows Thumb and prints ok, but I jsut cannot see it in full, it is locke in the left hand corner.

  • Since updating a day ago, Firefox will not open on full screen on Windows 7

    Accessing from taskbar on Windows 7 shows its open but will not open on full screen. And its also affected my Quicken program, doing the same thing. I uninstalled and reinstalled, still same problems. Did the updates affect my computer? And adobe was updated at the same time. I spent two hours w/ Quicken support, problem still exists. The only change that was made to the computer was the Mozilla update.

    Right-click on the shortcut used to open Firefox and select Properties. If you get a Windows Jump list when you right click, right-click on the Firefox entry in the jump list and select properties.
    In the Shortcut tab of the properties dialog box, set the Run option to Maximized, then click OK to save the settings.
    You can do this for any program.

  • Show photo full screen without border?

    When I try to show a photograph "full screen" (ctrl-cmd-F), there is a border around the photo which wastes screen space and makes the photo harder to see than a true full screen display would.  Is there a way to show photos over the whole screen without Photos adding anything (like borders or controls)?  I know you can use the slider to make a single image fit the screen, but of course, that is unreasonable for many photos, especially if you are showing photographs to other people.  Thanks.

    I found the (sort of) answer after some playing a bit more.  It seems that Photos does not enlarge a photo to fill the screen if the photo's resolution is less than the resolution of the screen (or maybe some multiple of the resolutions is used).  So if you have a large photograph and show it in full screen, it will indeed take the full screen.  But if you have say a 1200x800 photo on a MacBook Retina 15 inch, full screen will show the photo with a border around it. 
    I've never before seen a photo viewer that does not have an option to expand small photos to fill the screen, but apparently I have now.  I assume this omission is in keeping with Apple's philosophy that function is secondary to simplicity (where simplicity is defined solely as keeping options to a minimum).  I'd love to be wrong about this so if anyone knows of an option to expand all photos to fill the screen regardless of the resolution of the original image, I'd still like to know.   Thanks again

Maybe you are looking for

  • Help needed in ST03

    Hi Experts, Could some one give me the list of Tables from where ST03 shows data? I have installed the new Business Stats.RSSDSTAT Table is obsolete in the new BI 7 Stats.so there should be some other tables. I need the table information because I am

  • Slow moving items:repost

    Hi, In this link, in slow moving article on page 12, <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bb7eb390-0201-0010-498c-80532df171a5">https://www.sdn.sap.comhttp://www.sdn.

  • How do I enlarge the text size and incease the resolution

    I just switched to a new computer and suddenly the text on and off line is in tiny letters I can barely read. How do i enlarge it to its former size and also restore its former resolution?

  • Increasing photo quality in Web Photo Galleries

    I create Photo Galleries (Create->Photo Galleries) and FTP them to an ISP for family to view. However the quality of the photos is low(ish). I have tried every Type and Style I can find in Elements. How do I increase the size (and therefore quality)

  • Creating SOAPElement from String

    Hi! I'm working with generic web services, i have a String representing an XML document, and i need to create a SOAPElement with that information; i have seen another forums but i haven't found the solution to my problem I need to return a SOAPElemen