Adobe on the beach

Flash is on the beach but Adobe too!
So give us an official date for the release right now

Hi Scott,
You're right. It is an Antec gaming box. I am planning to use a Sony XDcam, an EX1R. 1) I think these are indeed EX files and as Harm said below, these are in fact compressed. I will be doing the editing from probably seven or eight takes and with a few special effects I do want some power to spare so the work will go smoothly. 2) Thank you for confirming that a Raid 0 array is bad news for the C drive. Again, my system won't even boot into Win 7 Pro with my two 128GB Crucial C300 series SSDs in Raid 0. But what about a newer Crucial m4 256GB SSD as the C drive? Would something else be better?
3) From the Ebay listing I've got the other specs of my current system.
Asus P6T6 WS Revolution socket 1366 motherboard - X58 chipset motherboard.
Details:
Intel® Core™ i7 Processor Extreme Edition / Core™ i7 Processor / Xeon® 3500 Series Processor
Intel Xeon X5680 Westmere six core processor - 3.33Ghz with 12MB of cache - With Hyperthreading enabled, your applications will see 12 processor cores.
Two Crucial 128GB Solid State SATA drives, CTDDAC128MAG-1G1 - configured in a RAID 0 array (striping). This array holds the operating system and program files. Drives are housed in a StarTech.com 4x2.5 SATA backplane and connected to a HighPoint RocketRaid 2710 PCIe RAID controller and operate at the faster 6Gb/s throughput.
Two Seagate Barracuda XT 2TB SATA hard drives for file storage - Drives are configured as just individual storage drives, but could be re-configured in RAID 1 for mirroring, or RAID 0 for striping. There is room in the case to add 7 more 3.5” hard disk drives.
1 - nVidia Quadro 4000 PCIe video card equipped with 2GB of GDDR5 memory
Thanks for the answer! James

Similar Messages

Everytime I start up my Mac mini I'll be able to use it only for a little while then the beach ball appears and it won't let me do anything I have to keep forcing it to turn off by holding the power button can someone help me?

I have no external devices connected to my Mac mini but still everytime I use it after about half hour to an hour in whatever I'm using wether it's the Internet or iPhoto or iTunes the beach ball appears and I cannot get it to stop I always have to press and hold the power button and force it to switch off I then do a safe reboot and it starts up again fine but same thing again after a certain amount of time it will freeze. I have also had on some occasions a bright white screen with a folder and a flashing question mark appear but it's not because of any external devices as they have all been removed please can someone help me as I have no idea why this keeps happening to my computer and I'm worried that there's something seriously wrong it's only about 6 months old and I have no experience in dealing with computers ??

EtreCheck version: 2.1.8 (121)
Report generated 13 February 2015 15:33:46 GMT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    Mac mini (Late 2012) (Technical Specifications)
    Mac mini - model: Macmini6,1
    1 2.5 GHz Intel Core i5 CPU: 2-core
    4 GB RAM Upgradeable
        BANK 0/DIMM0
            2 GB DDR3 1600 MHz ok
        BANK 1/DIMM0
            2 GB DDR3 1600 MHz ok
    Bluetooth: Good - Handoff/Airdrop2 supported
    Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
    Intel HD Graphics 4000
        LG TV spdisplays_1080p
System Software: ℹ️
    OS X 10.10.2 (14C109) - Time since boot: 0:11:35
Disk Information: ℹ️
    APPLE HDD ST500LM012 disk0 : (500.11 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Macintosh HD (disk0s2) / : 499.25 GB (398.54 GB free)
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
    Apple Inc. BRCM20702 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple, Inc. IR Receiver
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Configuration files: ℹ️
    /etc/sysctl.conf - Exists
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Applications/AVG AntiVirus.app
    [loaded]    com.avg.Antivirus.OnAccess.kext (2015.0 - SDK 10.8) [Click for support]
Launch Agents: ℹ️
    [running]    com.avg.Antivirus.gui.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [running]    com.avg.Antivirus.infosd.plist [Click for support]
    [running]    com.avg.Antivirus.services.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Internet Plug-ins: ℹ️
    Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
    FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
    Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    Default Browser: Version: 600 - SDK 10.10
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
Time Machine: ℹ️
    Time Machine not configured!
Top Processes by CPU: ℹ️
         5%    WindowServer
         1%    AVG
         0%    AppleSpell
         0%    fontd
         0%    cloudpaird
Top Processes by Memory: ℹ️
    215 MB    com.apple.WebKit.WebContent
    125 MB    avgd
    107 MB    Safari
    90 MB    Messages
    69 MB    WindowServer
Virtual Memory Information: ℹ️
    171 MB    Free RAM
    1.68 GB    Active RAM
    1.53 GB    Inactive RAM
    637 MB    Wired RAM
    1.34 GB    Page-ins
    2 MB    Page-outs
Diagnostics Information: ℹ️
    Feb 13, 2015, 03:20:28 PM    Self test - passed
    Feb 6, 2015, 08:08:07 PM    /Library/Logs/DiagnosticReports/Kernel_2015-02-06-200807_[redacted].panic [Click for details]

Since loading Lion, I've experienced much more instability than Snow Leopard. In particular, Mail crashes with regularity, full-screen apps seem to run slower and show the beach ball more often for longer, etc. I'm disappointed with the performance. Any

Since loading Lion, I've experienced much more instability than Snow Leopard. In particular, Mail crashes with regularity, full-screen apps seem to run slower and show the beach ball more often for longer, etc. I love the features, but I'm disappointed with the performance. Any help coming from Apple? I've been sending them so many reports after crashes, that their file must be full!

Summoning max. courage, I did what you advised. Here is the result. What does this tell you? My Lion 7.2 (mid 2011 iMac) has several annoying glitches (which I have so far tolerated through gritted teeth) but none that have actually stopped me working.
BTW, I see several items involving CleanMyMac which I did not know I had. It is generally villified as a trouble-maker. Spotlight can't find an app. or a utility of that name. How can I get rid of what's there please? Just delete?
Last login: Thu Nov 3 20:55:11 on console
Steve-Kirkbys-iMac:~ stevekirkby$ kextstat -kl | awk ' !/apple/ { print $6 $7 } '
com.AmbrosiaSW.AudioSupport(4.0)
Steve-Kirkbys-iMac:~ stevekirkby$ sudo launchctl list | sed 1d | awk ' !/0x|apple|com\.vix|edu\.|org\./ { print $3 } '
Password:
com.openssh.sshd
com.stclairsoft.DefaultFolderXAgent
com.microsoft.office.licensing.helper
com.bombich.ccc.scheduledtask.067493DB-2728-4DF3-87D8-092EF69086E8
com.bombich.ccc
com.adobe.SwitchBoard
Steve-Kirkbys-iMac:~ stevekirkby$ launchctl list | sed 1d | awk ' !/0x|apple|edu\.|org\./ { print $3 } '
com.sony.PMBPortable.AutoRun
uk.co.markallan.clamxav.freshclam
com.veoh.webplayer.startup
com.macpaw.CleanMyMac.volumeWatcher
com.macpaw.CleanMyMac.trashSizeWatcher
com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae
com.adobe.AAM.Scheduler-1.0
Steve-Kirkbys-iMac:~ stevekirkby$ ls -1A {,/}Library/{Ad,Compon,Ex,Fram,In,La,Mail/Bu,P*P,Priv,Qu,Scripti,Sta}* 2> /dev/null
/Library/Components:
/Library/Extensions:
/Library/Frameworks:
AEProfiling.framework
AERegistration.framework
ApplicationEnhancer.framework
AudioMixEngine.framework
FxPlug.framework
NyxAudioAnalysis.framework
PluginManager.framework
ProFX.framework
ProMetadataSupport.framework
TSLicense.framework
iLifeFaceRecognition.framework
iLifeKit.framework
iLifePageLayout.framework
iLifeSQLAccess.framework
iLifeSlideshow.framework
/Library/Input Methods:
/Library/Internet Plug-Ins:
AdobePDFViewer.plugin
EPPEX Plugin.plugin
Flash Player.plugin
Flip4Mac WMV Plugin.plugin
JavaAppletPlugin.plugin
Quartz Composer.webplugin
QuickTime Plugin.plugin
SharePointBrowserPlugin.plugin
SharePointWebKitPlugin.webplugin
Silverlight.plugin
flashplayer.xpt
iPhotoPhotocast.plugin
nsIQTScriptablePlugin.xpt
/Library/LaunchAgents:
com.adobe.AAM.Updater-1.0.plist
com.sony.PMBPortable.AutoRun.plist
/Library/LaunchDaemons:
com.adobe.SwitchBoard.plist
com.apple.remotepairtool.plist
com.bombich.ccc.plist
com.bombich.ccc.scheduledtask.067493DB-2728-4DF3-87D8-092EF69086E8.plist
com.microsoft.office.licensing.helper.plist
com.stclairsoft.DefaultFolderXAgent.plist
/Library/PreferencePanes:
.DS_Store
Application Enhancer.prefPane
Default Folder X.prefPane
DejaVu.prefPane
Flash Player.prefPane
Flip4Mac WMV.prefPane
/Library/PrivilegedHelperTools:
com.bombich.ccc
com.microsoft.office.licensing.helper
com.stclairsoft.DefaultFolderXAgent
/Library/QuickLook:
iWork.qlgenerator
/Library/QuickTime:
AppleIntermediateCodec.component
AppleMPEG2Codec.component
DesktopVideoOut.component
DivX 6 Decoder.component
FCP Uncompressed 422.component
Flip4Mac WMV Advanced.component
Flip4Mac WMV Export.component
Flip4Mac WMV Import.component
LiveType.component
/Library/ScriptingAdditions:
.DS_Store
Adobe Unit Types.osax
Default Folder X Addition.osax
/Library/StartupItems:
Library/Address Book Plug-Ins:
Library/Frameworks:
EWSMac.framework
Library/Input Methods:
.localized
Library/Internet Plug-Ins:
Library/LaunchAgents:
com.adobe.AAM.Updater-1.0.plist
com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
com.macpaw.CleanMyMac.trashSizeWatcher.plist
com.macpaw.CleanMyMac.volumeWatcher.plist
com.veoh.webplayer.startup.plist
uk.co.markallan.clamxav.freshclam.plist
Library/PreferencePanes:
.DS_Store
Perian.prefPane
WindowShade X.prefPane
Library/QuickTime:
AC3MovieImport.component
Perian.component
Library/ScriptingAdditions:
Steve-Kirkbys-iMac:~ stevekirkby$

Second hard drive and the Beach Ball

Hello again, time to use the ever helpful Apple boards.
I've been having a strange and disturbing problem, disturbing because it always ends in a hard reboot.
I have two internal hard drives, one for running software, (called HD) the other for storing files. (Called FILES...Mostly Photoshop and Adobe Illustrator files).
Sometimes, when waking from sleep, I click on FILES and get an everlasting Beach Ball. I try to relaunch the finder and it won't relaunch, so a power switch reboot is the only way to get it going again.
What I've done: Disk Utility and Disk Warrior repairs. Apple Hardware Test shows all OK. SMART info still shows disk is good. I Checked connections. PRAM reset, permissions, com.apple.finder.plist deleted, still it happens. A reboot and everything is OK again, it's just that it's a hard reboot. It does not happen every time, but once or twice a week. I backup regularly so no data has been lost.
Is this a problem with the finder or could it be the drive? Logic board?
I think I am going to buy another drive and put it in there and see if it still happens. Unitl then, does anybody have an idea what this could be?
G5 Dual 2.3 Mac OS X (10.4.6) 5.5 GB RAM

Are both hard drives using the built-in SATA bus? Or have you added a Parallel ATA to PCI card to enable the use of Parallel ATA hard drives.
Yes, they are both on the SATA.
I have come up with an interesting trick/workaround. If I have an item in the trash from FILES and I try to empty it before detecting the "freeze" (before I click on FILES and get Beach Ball) I get an error message saying the trash can't be emptied.
Stupid me, I didn't write down the error code because I didn't know that it had anything to do with this problem when it happened. But now I keep an item in the trash from FILES all the time, and I empty trash when waking from sleep. One of these times I'll get that error code again and post it in this thread.
More importantly, until I figure out what this is, I can use this to tell me that the "freeze" is occuring without triggering the Beach Ball, and thus avoiding the hard reboot.

Dreamweaver opens then I get the beach ball.

Hi there,
Dreamweaver CS6 on a Mac, Dual-Core Intel Xeon running Lion, 10.7.5.
I'm an occasional user of Dreamweaver CS6. In the last few days it has been playing up. DW will open the main screen with the welcome window and then show the beach ball.
If you wait long enough (30 minutes or more) the last job will open - but you can't touch it or do anything with it.
The force quit applications window shows DW alternating between responding and NOT responding. But at no point can I access anything with the mouse.
Following in the steps of others on the forum with a similar problem I looked in the console and found the following message:
23/10/2012 09:33:57.577 Dreamweaver: CFURLCreateWithString was passed this invalid URL string: '/System/Library/Frameworks/' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
I have re-installed so many times now that I am certain this is of no benefit.
And I have created a new user account as suggested by Adobe and DW works fine there - then went back to my admin account.
For me the short cut is to boot up with shift-key held down which allows DW to open fully and work fine.
After doing this yesterday DW was fine, but today I open DW and get the beach ball again.
Clearly something is not right but I am at a total loss as to whether its a DW problem or and OSX problem.
Being an intermittent user of DW this is the first time I have had a problem with it.
I would therefore be most greatful if anyone can throw and envelope of light on this saga.
Thanks
Keith
Message was edited by: magicnumbers

Hi Jon,
Thanks for your suggestion, although I haven't tried it I will keep a note of it just in case.
The reason I didn't try it is because not long after getting this issue with DW I noticed that some things weren't displaying with the usual fonts in Safari.
It would seem that somehow I have turned off some crucial fonts in Suitcase Fusion 4.
Having turned all local fonts back on again I have not experience the beach ball with DW.
But if it does happen I'll try your suggestion straight away.
Thanks very much for your time.
Keith

Every time I open Mail it fails to respond, the windows stay blank and I get the beach ball and can only close it by force closing. Any ideas?

Every time I open Mail on my Macbook Pro, which is only a couple of weeks old, it fails to open, the windows stay blank and I get the beach ball. The only way I can get it to close is to force it using the command alt esc buttons. Any ideas?

Hi Elijahcross,
If you are having issues with iTunes freezing shortly after opening, you may find the troubleshooting in the following article helpful:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Regards,
- Brenden

I'm having trouble accessing a Library. I keep getting the beach ball every time I try to open it.

Hi all. Very, VERY new to FCP. I've used many of your suggestions on here to help me through a lot, so thank you!
This is just one issue that I can't seem to figure out.
I was working on a project yesterday without any problems.
Today when I went to work on it, Final Cut would start up, but it would display the beach ball forever once the start up routine was finished. The project would never load.
A note, I have all current App updates installed.
(I figured maybe this particular project didn't get updated for some reason, so I tried manually updating my projects and events, but when I went to select them in my 2nd drive, they were grey and I couldn't select them.)
Another note, other projects work perfectly fine when I go to open them. It's just when I go to open this particular one, Final Cut will not work. Endless beach ball.
I tried a suggestion that one user had, and that was to open two separate windows in Finder, and move the uncooperative library package contents into a new library. That didn't work either, and now I am unable to move the library package contents back to their original library. There is a yellow "!" triangle next to the library in Final Cut, so I'm wondering if this means that the file is corrupt.
Hopefully I've given enough information on here to shed some light on my problem. Any help would be greatly appreciated.

If it was working on 10/1, why not open up the most recent backup library with a timestamp of that day. Unless you specified otherwise, your backup folder is in Movies in your home folder. You can double-click one to open it in FCP.
The update command actually wants a mounted drive selected.
I suggest not going into the library bundles and moving or modifying folders/files except as a last resort. It sounds like both libraries are corrupted.
Russ

How can I get a pdf. to open in Safari, all i'm getting is a new window with a black, blank page, instead of the pdf., and I don't want to save the file to the desktop, Safari didn't use to do that, and I don't have Adobe in the internet plug in folder.

How can I get a pdf. to open in Safari, all i'm getting is a new window with a black, blank page, instead of the pdf., and I don't want to save the file to the desktop, Safari didn't use to do that, and I don't have Adobe in the internet plug in folder.

Hi
Please take a look to this thread Re: Can I refresh the browser rather than open a new tab?

When I open safari, I get a blank page and the beach ball.

When I open safari, I get a blank page and the beach ball. If I try to go to a website, it will load up to a certain point sometimes—the .com of www.facebook.com for instance—but other times, nothing at all.
I've fixed this once before by deleting some files in the library folder—extensions & preferences I believe—and choosing not to have plug-ins selected, then restarting the whole computer—rather than just safari. It will work fine for a day, or maybe 3 at the most, before I have to repeat the process all over again. I'm sure it's because I usually put plug-ins back on once I get it to work, because you can't really use the internet without using plug-ins. But I'm using Chrome right now, as I do when I'm too lazy or too in a rush to try the whole process of getting safari to work again, and I don't have a single issue with it.
My question is really, what plug-in could cause this to happen repeatedly? It's not like I'm going to websites that may have malware on them. I spend most of my day going to some of the most visited websites on the internet.
Is there a known bug out there, because Java has been overrunning concurrently with this happening. It's CPU % runs around 100. I quit the process, but it doesn't change anything. So, other than the fan turning on, I have not had any popup telling me that safari has crashed, that I'm not connected to the internet, or that something went horribly, horribly wrong. I'm pretty sure Safari things it's running fine, but it's not.
Thanks in advance.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag — do not type — the line below into the Terminal window, then press return:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

In CC214 PS Why has adobe removed the "print Size Button" And why have they made the Brush preview window so small you can't see the effects to accurately adjust them?

In CC214 PS Why has adobe removed the "print Size Button" And why have they made the Brush preview window so small you can't see the effects to accurately adjust them?
These two things need to be remedied in their upgrades because It's become such a bother I've had to revert to older versions of PS.

Yea, and it's a pain to get to. What was the rational for removing the print size button? With the magnifying glass tool selected in older versions of Photoshop you would get a button that says "print size" right next to Actual pixels, Fit Screen, Fill Screen. Now I have to go out of my way and dig for it if I want to see the print size. Of all the buttons you could have taken away, why not fill screen? I never use that.
Besides the point I just downloaded the Oct Upgrade for PS and surprise! Nothing has changed and these are two big black eyes on newer versions of Photoshop. The Brush preview window is unchanged in CC but in CC2014 it's basically worthless. If you apply a texture to a brush you can't properly see the scale of the texture, the spacing, scatter, etc...

My 3 year-old macbook pro is very slow. I have run disk utility and virus scan with no improvement. The "beach ball" will spin for minutes at a time when opening, closing or changing windows. Apple Store looked at it a few months ago with no help.

my 3 year-old macbook pro is very slow. I have run disk utility and virus scan with no improvement. The "beach ball" will spin for minutes at a time when opening, closing or changing windows. Apple Store looked at it a few months ago with no help. What can I do?

Under CPU: 3.5% user; 5% system; 91% idle; 441 threads; 90 processes.
Under System: out of 2GB - 54.7MB free; 530MB wired; 603MB active; 862MB inactive; 1.95GB used.
Is too much of the system memory tied up? If so, what can I do to free some up?

I am getting error 205 while trying to install Creative Cloud. I already had chated with support, Uninstalled CC and tried to install it again. From the Adobe site, the page keeps loading eternally, from the previous installer, it gives me error 205. What

I am getting error 205 while trying to install Creative Cloud. I already had chated with support, Uninstalled CC and tried to install it again. From the Adobe site, the page keeps loading eternally, from the previous installer, it gives me error 205. What to do? Give up on CC?
This is not the first time I get it, and it seems a recurring problem.

Milliet are you on a managed network? If not then please see Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html for information on how to resolve error 205.

I ordered the IX500 Scan Snap through Amazon and received the incorrect XI Standard disc in Windows format instead of for my Mac. I contacted Amazon and they suggested I contact Scan Snap who suggests I contact Adobe for the correct disc. Please help.

I ordered the IX500 Scan Snap through Amazon and received the incorrect Adobe Acrobat XI Standard disc in Windows format instead of for my Mac. I contacted Amazon and they suggested I contact Scan Snap who suggests I contact Adobe for the correct disc. Please help.

Fujitsu delivers only Adobe Acrobat for Windows, not Mac.
http://www.fujitsu.com/global/services/computing/peripheral/scanners/product/ix500/

I have a question about extracting pages. When I do the function, adobe saves the individual files as " file name space page number ", so the files look like this "filename 1.pdf", "filename 2.pdf", "filename 3.pdf". Without too many gory details, I a

I have a question about extracting pages. When I do the function, adobe saves the individual files as "<file name><space><page number>", so the files look like this "filename 1.pdf", "filename 2.pdf", "filename 3.pdf". Without too many gory details, I am using excel to concatenate some data to dynamically build a hyperlink to these extraced files. It casues me problems, however, for the space to be the the file name. Is there any way to change the default behavoir of this function to perhaps use a dash or underscore instead of a space?

No, you can't change the default naming scheme. You can do it yourself if you extract the pages using a script instead of using the built-in command.

Every time I click print in Pages I get the beach ball and my mac freezes.

I just updated to the newest version of pages and every time I click print in pages I get the beach ball and my mac freezes. Any suggestions on fixing this? I've tried shutting down and restarting several times...nothing seems to be working and I'm loosing/wasting time trying to fix this...

Hey there nmiller0528,
It sounds like you are unable to print from Pages at all from your computer. I want to recommend troublehsooting the Mac OS for print issues with this article named:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/TS3147
Follow these steps until the issue is addressed:
Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
Reset the printing system, then add the printer again.
If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
Contact the printer vendor or visit their website for further assistance.
Thank you for using Apple Support Communities.
Take care,
Sterling

Adobe on the beach

Similar Messages

Maybe you are looking for