Adobe PDF displays "please wait" preview in OPEN file under Windows XP

An Adobe form created in LifeCycle 8.2, enabled for Adobe Reader version 9, displays "Please Wait" page in the preview in place of the actual document form view. Is there a way to disable this error meassage?

Hi,
no you cannot change this behavior.
This messages is present in all XFA forms (dynamic PDF's) you create with Designer and will be displayed when the PDF viewer cannot handle the XFA data inside the PDF.
In general only Acrobat and Reader support XFA forms, most of the other PDF viewers don't.

Similar Messages

  • Please wait message when opening form created by Adobe LiveCycle Designer ES 9.0

    Problem
    Please wait message when opening form created by Adobe LiveCycle Designer ES 9.0
    Full message
    Please wait... If this message is not eventually replaced by the proper contents of the document, your PDF viewer may not be able to display this type of document. You can upgrade to the latest version of Adobe Reader for Windows®, Mac, or Linux® by visiting  http://www.adobe.com/products/acrobat/readstep2.html. For more assistance with Adobe Reader visit  http://www.adobe.com/support/products/ acrreader.html. Windows is either a registered trademark or a trademark of Microsoft Corporation in the United States and/or other countries. Mac is a trademark of Apple Inc., registered in the United States and other countries. Linux is the registered trademark of Linus Torvalds in the U.S
    Actions
    Updated Windows RT 8 to 8.1
    Uninstaled Adobe Reader Touch 1.3 and instaled 2.0 Build 84770
    Additional Information
    The form was created 10 or 11 months ago, and we are pretty sure that we were able to open it a while back
    The same PDF file opens just fine in Windows 8.1 using Adober Reader XI 11,0.06, it is only the app that is affected.
    The document cannot be opened by any other mobile app that we have tried or on another mobile OS (iOS)
    Any ideas?
    Thanks & Regards
    Jim

    The user's assertion is surprising to me, but perhaps I'm missing something important. I thought the correct position was from the conclusion of my earlier post "it can't be done". Adobe state their Reader Touch doesn't support XFA (http://blogs.adobe.com/readermobile/2012/12/13/adobe-reader-for-windows-8-tablets/). Unless (see that blog entry) you changed the type of form.

  • Everytime I open Adobe i get "please wait while windows configures adobe acrobat xi" how can I stop it?

    When I open adobe, I get "please wait while windows configures adobe acrobat xi"

    Nobody can tell you anything without proper system info or other technical details.
    Mylenium

  • I subscribed to Adobe PDF Pack, but how do I open/start it?

    I subscribed to Adobe PDF Pack, but how do I open/start it?

    See if this helps you to get started: https://forums.adobe.com/docs/DOC-3582
    [topic moved to Acrobat.com Services forum]

  • I redownloaded my Photoshop CS5 and Camera Raw will not accept my RAW files nor will the Adobe Bridge display the picture view of these files. A message displays saying it doesn't support this camera.  I have a Nikon 5100 DSLR Camera.  It always displayed

    I redownloaded my Photoshop CS5 and Camera Raw will not accept my RAW files nor will the Adobe Bridge display the picture view of these files. A message displays saying it doesn't support this camera.  I have a Nikon 5100 DSLR Camera.  It always displayed them in the past.  How can I get it to display these photos in Bridge and open them in RAW?

    Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 6.7 Update
    Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Camera Raw 6.7 Update
    Benjamin

  • WebUtil within Oracle Forms (Find File - Open File Dialog Window)

    I have successfully configured WebUtil and I can successfully execute the functions. I have been working with PKG_FIND_FILE.Selection function (which displays an Open File Dialog Window).
    I cannot figure out why the following is occurring:
    When I call the above function, the system typically displays an older dialog window (light blue / gray) window. For a brief time, we were able to bring up the "Windows looking" dialog window. I don't know what we changed in the configuration, but it is now back to the older looking light blue/gray dialog window.
    Any ideas on where in the configuration, this would cause the dialog window to switch its "look and feel"
    Thanks,
    Mike

    File dialog look has been changed because of the java version difference.
    In Java 1.4 the look is different and 1.5 shows another way.
    So check which java plugin and the version of the java
    ( go to control panel->settings -> click on java and check on version)
    Rajesh ALex

  • Creating BOM using BDC :How to display no of records from flat file under

    Hi,
          How to display no of records from flat file under one (Alternative BOM) vertically.
        When i execute, the records are replacing one by one.
    Here my coding:
    report ZBOM1
           no standard page heading line-size 255.
    *include bdcrecx1.
    DATA: BEGIN OF bdc OCCURS 0,
           matnr(18),
           werks(4),
           stlan(1),
          END OF BDC.
    DATA: BEGIN OF BDC1 OCCURS 0,
           idnrk(18),
           MENGE(18),
           MEINS(3),
           postp(1),
          END OF bdc1.
    DATA: BEGIN OF BDCDATA OCCURS 0,
             matnr(18),
             werks(4),
             stlan(1),
             idnrk(18),
             MENGE(18),
             MEINS(3),
             postp(1),
             posnr(4),
          END OF BDCDATA.
    data: ibdcdata type  standard table of bdcdata WITH HEADER LINE.
    *start-of-selection.
    CALL FUNCTION 'GUI_UPLOAD'
      EXPORTING
        FILENAME                      = 'C:\Documents and Settings\dilipkumar.b\Desktop\soft.txt'
       FILETYPE                       = 'ASC'
       HAS_FIELD_SEPARATOR            = ','
      HEADER_LENGTH                 = 0
      READ_BY_LINE                  = 'X'
      DAT_MODE                      = ' '
      CODEPAGE                      = ' '
      IGNORE_CERR                   = ABAP_TRUE
      REPLACEMENT                   = '#'
      CHECK_BOM                     = ' '
      VIRUS_SCAN_PROFILE            =
      NO_AUTH_CHECK                 = ' '
    IMPORTING
      FILELENGTH                     =
      HEADER                         =
      TABLES
        DATA_TAB                      = BDCDATA
    EXCEPTIONS
      FILE_OPEN_ERROR               = 1
      FILE_READ_ERROR               = 2
      NO_BATCH                      = 3
      GUI_REFUSE_FILETRANSFER       = 4
      INVALID_TYPE                  = 5
      NO_AUTHORITY                  = 6
      UNKNOWN_ERROR                 = 7
      BAD_DATA_FORMAT               = 8
      HEADER_NOT_ALLOWED            = 9
      SEPARATOR_NOT_ALLOWED         = 10
      HEADER_TOO_LONG               = 11
      UNKNOWN_DP_ERROR              = 12
      ACCESS_DENIED                 = 13
      DP_OUT_OF_MEMORY              = 14
      DISK_FULL                     = 15
      DP_TIMEOUT                    = 16
      OTHERS                        = 17
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    *perform open_group.
    loop at bdcdata.
    perform bdc_dynpro      using 'SAPLCSDI' '0100'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RC29N-STLAN'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'RC29N-MATNR'
                                  'SOFTDRINKS'.
    perform bdc_field       using 'RC29N-WERKS'
                                  'WIND'.
    perform bdc_field       using 'RC29N-STLAN'
                                  '1'.
    perform bdc_field       using 'RC29N-DATUV'
                                  '16.09.2008'.
    perform bdc_dynpro      using 'SAPLCSDI' '0110'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'RC29K-BMENG'
                                  '1'.
    perform bdc_field       using 'RC29K-STLST'
                                  '1'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RC29K-EXSTL'.
    perform bdc_dynpro      using 'SAPLCSDI' '0111'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RC29K-LABOR'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_dynpro      using 'SAPLCSDI' '0140'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RC29P-POSTP(01)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=FCBU'.
    perform bdc_field       using 'RC29P-IDNRK(01)'
                                  BDCDATA-IDNRK.
    perform bdc_field       using 'RC29P-MENGE(01)'
                                  BDCDATA-MENGE.
    perform bdc_field       using 'RC29P-MEINS(01)'
                                  BDCDATA-MEINS.
    perform bdc_field       using 'RC29P-POSTP(01)'
                                  BDCDATA-POSTP.
    perform bdc_dynpro      using 'SAPLCSDI' '0130'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RC29P-POSNR'.
    perform bdc_field       using 'RC29P-POSNR'
                                   BDCDATA-POSNR.            "'0010'.
    perform bdc_field       using 'RC29P-IDNRK'
                                  BDCDATA-IDNRK.             "'15'.
    perform bdc_field       using 'RC29P-MENGE'
                                  BDCDATA-MENGE.             "'1'.
    perform bdc_field       using 'RC29P-MEINS'
                                  BDCDATA-MEINS.             "'ml'.
    perform bdc_dynpro      using 'SAPLCSDI' '0131'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RC29P-POTX1'.
    perform bdc_field       using 'RC29P-SANKA'
                                  'X'.
    *perform bdc_transaction using 'CS01'.
    *perform close_group.
    CALL TRANSACTION 'CS01' USING IBDCDATA MODE 'A' UPDATE 'S'.
    REFRESH IBDCDATA.
    endloop.
           Start new screen                                              *
    FORM BDC_DYNPRO USING PROGRAM DYNPRO.
      CLEAR iBDCDATA.
      iBDCDATA-PROGRAM  = PROGRAM.
      iBDCDATA-DYNPRO   = DYNPRO.
      iBDCDATA-DYNBEGIN = 'X'.
      APPEND ibDCDATA .
    ENDFORM.
           Insert field                                                  *
    FORM BDC_FIELD USING FNAM FVAL.
    IF FVAL <> NODATA.
        CLEAR iBDCDATA.
        iBDCDATA-FNAM = FNAM.
        iBDCDATA-FVAL = FVAL.
        APPEND iBDCDATA .
    ENDIF.
    ENDFORM.

    Hi,
    the BDCDATA structure must be fnam, fval,dynbegin,dynpro,program.
    You have to declare like this and pass this in your CALL TRANSACTION statement.
    Please give some other table name for BDCDATA you declared for and also for IBDCDATA.

  • On websites which open pop-under windows, Firefox 4 seems to be opening these over the current window instead of under. Is this a bug or an intentional feature?

    I have noticed a problem on FF4 when browsing sites that open pop-under windows on a user action. With all other browsers (including FF3) these open underneath the main window, but on Firefox 4 they open over the top - acting as pop-ups and not pop-unders.
    While pop-unders are annoying, it is even more annoying to have them keep appearing as pop-ups instead.
    I have run some tests and the following code successfully opens a pop-under on all browsers except Firefox 4.
    It appears that window.focus() is not correctly bringing the current window to the top.
    Example code:
    var w = window.open('http://www.mydomain.com/', 'mywin', 'width=400,height=300,toolbar=1,menubar=1,resizable=1,scrollbars=1');
    if(w){
    w.blur();
    window.focus();
    }

    This is normal. Firefox 4 has disabled the default "window flip".
    - go to adress about:config
    - accept and search dom.disable_window_flip set to false;
    And popunder, blur/focus javascript function will be back ;)

  • PDF won't display (please wait...)

    I am trying to get a tax form to show with Adobe Reader. The form is available at https://ww2.revenue.wi.gov/Internet/wi_efile/2010/Form1-2010.pdf . The site says Reader 9.0 or above is needed. I have installed 9.4.2, the latest version available for Debian. When I attempt to open it, I just get a page that reads "Please wait... If this message is not eventually replaced by the proper contents of the document, your PDF viewer may not be able to display this type of document." Am I missing something?

    It is a running joke that the acroread plugin crashes on linux.  It has been that way for years and looks set to be the same way forevermore.
    However there is a fix and it isn't too difficult.  Locate and delete (or move) the file npwrapper.nppdf.so /usr/lib64/browser-plugins/npwrapper.nppdf.so on my system) this is the plugin that is so flaky and causes the problems.  Now you have no embedded acrobat reader? but there is a solution:
    mozplugger - it is a bit old and unfashionable but it works everytime.  It can use acroread, evince, kpdf, gv or okular to actually do the display of the pdf inside your browser.  Personally I use okular despite the many bugs (stupid landscape printing bug, "can't zoom much" bug in okular etc etc).
    mozplugger can do all sorts of other stuff such as embedded word docs via libre office etc - it is pretty cool and <just works>.
    Watch out for your distro though - I'm using SUSE and it stupidly insists on installing yet another buggy npwrapper.nppdf.so every time it updates flash player.  If you have installed mozplugger you just need to delete npwrapper.nppdf.so again and all will be working A-ok.
    If you use (k)ubuntu mozplugger is why this is never a problem!

  • I just bought adobe pdf pack and now I cant open any of my jpeg pictures they show as adobe files

    wtf i just bought adobe pdf pack and now cant open any of my pictures...i get a pop up in adobe that teh file is corrupted...how do i get rid of this program and get my jpegs back t jpegs?

    In general below is the way to change the default program Windows  to open JPEG files or other file type:
    1. From "Start" > "Default Programs"
    2. Select "Associate file type or protocol with a program"
    3. Select "jpeg' from Name column
    You can change the setting to other program by clicking "Change Program" button at top right corner.
    Hisami

  • Dvd vcr combo slv-d370p doesn't allow time to be set. Displays "please wait, then try again"

    There is no disc or tape in the machine. I have tried waiting up to 8 hours to no avail.
    I tried unpluging the machine for a few minutes, and plugging it back in.
    Same result, please wait, then try again.
    The machine says this every time I press set up. Is there a work around that I haven't figured out?

     The PLEASE WAIT AND TRY LATER error will display when trying to access the setup menu if a tape is playing. Stop the tape before attempting to access the setup menu. However, if this occurs even if there's no disc inside then the player may require service. Please click here to check for your service options. 
    If my post answers your question, please mark it as "Accept as Solution"

  • Displaying 'please wait' graphic during long running process

    I have an Apex process that takes about 30 seconds to run. Is there any way to display some kind of 'please wait' graphic on the page to inform the user that something is going on?
    I assume some Javascript will be required. Or is there a way of doing it using pure Apex?

    Antilles,
    You can get started learning about there from Carl's demo:
    http://apex.oracle.com/pls/otn/f?p=11933:69
    Regards,
    Dan
    http://danielmcghan.us
    http://sourceforge.net/projects/tapigen
    http://sourceforge.net/projects/plrecur
    You can reward this reply by marking it as either Helpful or Correct ;-)

  • Display ("Please Wait") message WHILE the page loads

    Hello All,
    I have adf/jsf application. How to add message " Please Wait While Page Loads" WHILE+* the page is loading ?
    I am thinking of Window.confirm(" Please Wait While The Page Loads") Is there a better (More Modern) way to do this?_
    Many Thanks,

    John, when I type <af:statusIndicator and ctrl + space, JDev does not show statusIndicator as one of the choices. I tried adding code but it seems it does not recognize statusIndicator as one of the tags. I am using other jsf and adf tags on the same page :(
    Thanks,

  • I cant open the mac app store from my imac. it says "open itunes please wait" but never opens..

    im trying to use the mac app store since i bought my imac. it never opens, it says its temporally out of service or something like that or just stock on "connecting to itunes" "loading"

    Welcome to Apple Support Communities
    You already have got Pages 5.0, but you still have got Pages 4.3, so Pages 4.3 is being opened instead of the newest version, being this the reason why you get a message telling you to update Pages to the most recent version.
    If you don't need the old version, open a Finder window, choose Applications in the sidebar and delete the old Pages icon or move it to an external drive. I don't recommend you to do this, as users are complaining about the lack of features of the new version.
    Instead, what you can do is to put the new Pages icon in the Dock by dragging it from the Finder window to the Dock, so you can open the new Pages version from the Dock and you can open all your documents with it after opening the application

  • Preview not opening files (might be posted in wrong don't know where it)

    Hey I tried to open many different types of files in preview like .jpg, .png, .pdf, .psd and none won't open. Instead of opening through preview they open in QuickTime. Please help.

    "...and none won't open". That's a double negative.
    Do a Get-Info on the file/s (command-I). In the drop down menu Open with select Preview and then select Change all.

Maybe you are looking for