Adobe Photoshop CC missing Navigation & 3D tools

The below link to an adobe page which shows the tools in the tool panel has an extra set of tools for Navigation and 3D Tools:
(Section of the tool bar is marked "G")
Photoshop Help | Tool galleries
But I can't find these advanced tools in CC Like 3D Camera Walk for instance. Can someone please enlighten me on where the tools have been relocated too? Thanks.

Those tools are now with the Move Tool and in the Properties panel
I don't why adobe still has the tool box screenshot in there from photoshop cs5.
There are screenshots all over the help for photoshop cc 2014 the show photoshop cs5.
more info
Photoshop Help | 3D workflow | CC, CS6
Photoshop Help | 3D panel enhancements | Photoshop CC
daniel presedo - YouTube

Similar Messages

  • Adobe Photoshop CC missing files in application support folder

    Photoshop CC was installed and working perfectly. In order to free up hard drive space, I uninstalled Photoshop CS4.
    Now every time I open Photoshop CC (or Photoshop CS 5.1) a warning message appears saying: One or more files in the Adobe application Support folder necessary to run Photoshop are missing. Reinstall Photoshop.
    Dispite the warning, I click OK and Photoshop CC opens and runs fine.
    I do not want to reinstall any old versions of Photoshop. So how do I get rid of the warning message?
    Thanks,
    Peter

    re-install ps cs 5.1.

  • Error archive section adobe photoshop elements missing

    I get error message saying archive section of adobe photoshop elements is missing when I try to run the exe file; Ive downloaded everything.  Ill have another birthday by the time I download it all again.  Any advice?

    Hi Fe-W,
    Welcome to Adobe Forums.
    Please refer to the below article
    http://helpx.adobe.com/creative-suite/kb/start-installer-downloading.html
    Thanks

  • Photoshop CC missing Magic Wand Tool

    Hello! I've got the new Adobe Creative Suite for Student and am working with Photoshop CC at the minute but cannot find the Magic Wand Tool anywhere... is it not in this version, or is it hiding somewhere... can't locate it. Please help?

    Look in your Tools:

  • Adobe Photoshop CS5 Freezing on Eyedropper tool, please help!

    Hello all! I would be so appreciative of any help I can get with this.
    I am working on a some graphics that need to be completed very soon, and suddenly photoshop is freezing on the eyedropper tool. I've tried force quitting, which does not work, and then restarting multipe times, but this has not worked either. Every time I reopen my file (which is an 8.5 x 11, 350 ppi,grayscale image), and try to work with the paint bucket tool, the problem persists. I'm not able to click and change the tool, use any options under file/edit/view/etc, go to another layer, click out of the window/close photoshop. I am still able to zoom in and out with keyboard short cuts, but that is about it.
    I am working with CS5 on a Mac OS X 10.6.8 , 2.8 GHz Quad-Core Intel Xeon procesor.
    Please let me know if there is any more information I can provide to help explain the problem.
    Thank you!

    Have you tried resetting the eyedropper tool? 
    Click on dropdown box of tool in upper left hand corner.  Then click dropdown box arrow in right corner of the window.
    If that does nothing reset the preferences.
    Start photoshop and immdeiately hold down the option + command + shift keys.  (Windows Alt Ctrl Shift).
    You should get a reset window.
    It is a little tricky so if you see the splash screen you are too late.

  • ADOBE PHOTOSHOP ELEMENTS 7 Color Curves Tool problum

    When I click on the color curves tool it locks up at the top of the screen and almost fills the whole screen. There is no place at the top to grab it and pull it down because the top of it is hidden above the screen. Also it only shows thumbnail size pictures that can not be enlarged. I increased my screen resolution to 1280x800 and Photoshop decreases in size and the color curves tool decreases but the name of the tool and the close button at the top are still hidden and the color curves tool screen still can not be moved... Is this something I can fix or is this a software problem? I downloaded this trial version then upgraded it to a full version. I am using Windows Vista on a Sony Vaio laptop. William in Michigan.

    William,
    Try reseting the Editor's preferences:
    http://www.johnrellis.com/psedbtool/photoshopelements-6-7-faq.htm#Delete_the_Editors_prefe rences

  • I have adobe photoshop CS6 and I am trying to use the analysis tools but all of them except for the ruler tool are unavailable. Am I missing certain plug ins?

    I have adobe photoshop CS6 and I am trying to use the analysis tools but all of them except for the ruler tool are unavailable. Am I missing certain plug ins?

    Which operating system?
    If I recall, some features were not fully supported on XP.
    Nancy O.

  • Photoshop missing in bridge tools menu since CC2014 upgrade

    Photoshop is missing from the Bridge Tools menu since my CC2014 upgrade.
    How do I get it back?
    Any help?
    I'm dead in the water.
    r.

    Well, My Ps CC is long gone and, apparently, re-installing it does not solve the problem.  I posted another discussion on this issue within this forum entitled "Many communication issues between Photoshop CC 2014 and Bridge since update."  Sorry, had forgotten about this one.  I also tried calling Adobe's Tech support, but they don't seem even to be aware of such issues and were not able to present a solution over the phone.  So far, here is a summary of what is happening with me, which I hope will help pinpoint everyone else's issues:
    1. "Browse in Bridge" from Photoshop will result on CC app window opening asking if I am sure that I want to update "this Bridge version."  I have no idea of what this means.  I already updated Bridge and Photoshop over and over and the issue still occurs.
    2. Bridge tools menu does not have the options to open images in Photoshop any longer.  This is to me the most frustrating issue of all.
    3. Mini Bridge is absent from Ps CC 2014
    So, could Adobe please help here?

  • Adobe Photoshop CS5 (Windows 7) Lagging Brushes & Tools

    What I'm Using:
    - Toshiba F60 Qosmio Laptop w/ Windows 7
    - Adobe Photoshop CS5 (64 bit)
    Hey Everyone,
    I'm having an issue with my new Adobe Photoshop CS5 (64 bit) installed on my Brand new Laptop (Toshiba F60 Qosmio). Basically I have optimized via the Edit > Preferences > Performance menu in Photoshop CS5 but Im still having major issues with my Brushes, Patch, etc. Tools lagging while using them. When you enable the tool and use it, it will be atleast 0.5 - 1.0 Seconds behind the movement of the cursor. My Laptop is brand new and fully optimized for graphic design and seems to run every other application seamless. Adobe Photoshop launches quick and smoothly but once using the tools it has the same lag time.
    Does anyone know what I can do to fix this? Its driving me nuts and really cutting into my work schedule.
    Any ideas?
    Thanks
    Darren  

    Hi Chris,
    I will definitely give that a try. I had a tech set up my computer after i purchased it less than a week ago but it is a possibility that he missed it. I will try and run an update this weekend and see if that increases the speed when OpenGL is enabled. I will get back to you on the issue in the next few days.
    Thanks for your insight and helpful suggestion.
    Much appreciated.
    -Darren

  • Home view major bug: Home view navigation not available in Common File Dialog Box (i.e. Java, Adobe Photoshop etc)

    Homeview major bug: Homeview navigation not available in Common File Dialog Box (i.e. Java, Adobe Photoshop etc)
    Hi
    All though provisioning somewhat more flexsible and pointing forward ... things are starting to go wrong here ... i.e. pointing to a very potential lack of success introducing users to the new Home namespace/concept ...
    0) Situation if you do not fix 1 + 2:
    You can not release the Homeview feature like this - without fixing 1 + 2.
    If not 1 +2 is fixed you might just as well leave the release of the Homeview feature out of the roadmap for Windows 10. I.e. not ready for use ... or promotion in the UI
    1) How come Homeview has not been included - like other namespaces i.e. Libraries into the Common File Dialog Box?
    How can such a trivial thing to do be missed? I.e. like forgetting to include Homeview into Explorer (would be absurd).
    If not included into the Places Bar of the Common File Dialog Box ... Home View will be unusable - because some very visible applications like Java, Photoshop will not be able to navigate that space easily at all.
    2) Finally, please fix obscure situation in the UI namespace in Explorer
    Please fix obscures like having Home view, Favorites and Libraries (side-by-side complexity and confusion obscuring usability) - all similar concepts but on a different evolutionary step. I.e. have Favorites and Libraries
    hidden - and add i.e. view control like to small buttons whatever to unhide/show the legacy concepts.
    In any case - Home view already seem to migrate/move links from Favorites to the Homeview container.
    Additionally, Home view should migrate links from Libraries to Home view - and provide similar and better functionality.
    Thus going the evolutionary way from Libraries > Favorites > Home - with the later concept of Home providing links to the cloud. Even better, sync relation ships could then later (extended features for Home) be set up among the pins - i.e. concerning
    cloud/network syncing.
    The UI should always reflect the 1 essentional concept - and not under the hood technologies or different evolutionary stages of the same basic/essential concept (technology/implementation free - abstract: "Home with pining of user data space"
    - was previously favorites or libraries (thus obsoleted)). Now the name for that concept is Home. Have it include the technology that replaces Libraries too - i.e. categorization/nesting ... and some whitespace inbetween the nesting (alike some whitespace
    already there inbetween the namespaces in the Explorer UI ... provides easy "modular" reading)

    Hi,
    Please clarify the following:
    * "X: is a network drive, but it's actually a network drive on my machine." - Is "X" a mapped drive to one of your shared folder on network?
    * What is the project directory structure with respect to WEB-INF/web.xml? Are you able to see the three pages (from web & pages folder) in NitroX Editor?
    * Does the modified content appear in "Design view" of index.jsp upon restarting NitroX?
    Ex:
    - modify one of the pages in "web" folder > save the file (alert appears)
    - restart NitroX, does index.jsp display the modified content of included page?
    * If possible please send the test case project which exhibits the behavior to [email protected]
    Thanks,
    M7 Support

  • How do I turn off the alt scroll zoom?  When I'm in Adobe photoshop and illustrator using the pen tool, alt is utilized for another short cut.  I would like to use the alt command for the pen tool instead of zooming into the screen.

    How do I turn off the alt scroll zoom? 
    When I'm in Adobe photoshop and illustrator using the pen tool, alt is utilized for another short cut.  I would like to use the alt command for the pen tool instead of zooming into the screen.

    I tend to select things from left to right and every time I am moving in a downward right diagonal motion during lasso selection I am missing a clear view and I am tending to have a more sloppy selection.  All this does is slow me down since I need to go back and hit those areas again.  The big arrowhead just get's in the way.  The original lasso tool with the thin line and small active point at it's lower left was far better for me.
    I don't like turning the cursors to precise because I like to see the active tool icon where my cursor is and as the icon changes as I hold modifier keys down.  If I am forced to get comfortable with using pricise cursors I guess I will, but man, I've never had to do this in my 15 years of photoshop use...
    I would absolutely LOVE to find a way to get the old lasso icon -- without the arrowhead above it.
    Is there any chance this option could be inlcuded in cursor preferences?  I'd give much thanks, Adobe.

  • I'm using Photoshop Elements 12 on Windows 8.1.  When I go into the Expert Edit Mode the toolbar available appears in one single column and misses off several tools including foreground and background colour.  How can I restore the original toolbar?

    I'm using Photoshop Elements 12 on Windows 8.1.  When I go into the Expert Edit Mode the toolbar available appears in one single column and misses off several tools including foreground and background colour.  How can I restore the original toolbar?

    Thanks for your help - your suggestion worked beautifully.Dennis Hood
          From: 99jon <[email protected]>
    To: Dennis Hood <[email protected]>
    Sent: Thursday, 15 January 2015, 15:20
    Subject:  I'm using Photoshop Elements 12 on Windows 8.1.  When I go into the Expert Edit Mode the toolbar available appears in one single column and misses off several tools including foreground and background colour.  How can I restore the original toolbar?
    I'm using Photoshop Elements 12 on Windows 8.1.  When I go into the Expert Edit Mode the toolbar available appears in one single column and misses off several tools including foreground and background colour.  How can I restore the original toolbar?
    created by 99jon in Photoshop Elements - View the full discussionTry re-setting the prefs.Go to: Edit >> Preferences >> General (Photoshop Elements menu on Mac)Click the button Reset Preferences on next Launch If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7099161#7099161 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7099161#7099161 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"  Start a new discussion in Photoshop Elements by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • Just had help installing cc 2014. get this dialog box when i open the app. One or more files in the adobe folder necessary for running photoshop are missing. Help

    Just had help installing cc 2014. get this dialog box when i open the app. One or more files in the adobe folder necessary for running photoshop are missing. Help

    Please Run the Cleaner tool to remove Ps CC 2014 :http://www.adobe.com/support/contact/cscleanertool.html .
    Restart your system and then try installing Ps CC 2014 again.
    Regards,
    Ashutosh

  • Updated to new 2014 cc. In bridge when I go to tools/Photoshop/Image Processor....I get this message "adobe photoshop 2014 CC has quit working" Anyone have a fix for this??

    updated to new 2014 cc. In bridge when I go to tools/Photoshop/Image Processor....I get this message "adobe photoshop 2014 CC has quit working" Anyone have a fix for this??

    I use a  windows 7 pro and have no problem like that from bridge cc when I select a thumbnail then use menu Tools>Photoshop>Image Processor..  I see Adobe Photoshop CC 2014 start up then I see the Image processor dialog and that one file is selected in the bridge I the complete the dialog and click run.  The image files are created. Photoshop remains open after the image files are create with no open documents. I need to click on the bridge in the task bar to bring bridge back into focus.
    What does you system configuration?

  • Adobe Photoshop CS4/5 Crashes when using the Move Tool

    Hello. I'm here because I'm having an issue with Photoshop.
    I was trying out CS5 when it started to crash every time I tried to use the Move Tool. It was the generic error message: "Adobe Photoshop CS4 has stopped working.
    A problem has caused Adobe Photoshop CS4 to stop working correctly. Windows will close the program and notify you if a solution is available."
    Thinking that it was a CS5 issue, I went back to my copy of CS4, only to find the same thing happening there (I also downgraded because CS5 was also crashing at other random times for some reason, but that's an issue for another time).
    This puzzles me because both were working fine before. Granted, I hadn't opened them for a while, but it was a sudden thing.
    My first impulse was to uninstall and reinstall CS4. No luck. So then, I uninstalled all third-party plugins, thinking that might be it. Still, the same problem. I started looking around on Google for solutions and found the instructions on resetting the Tool preferences (I chose to reset the preferences for ALL of the tools). When that didn't work, I tried deleting the preferences file outright, which said instructions recommended. Nothing.
    I should note that Photoshop crashes when using the Move Tool to move an object without ant lines around it, i.e., a layer. I'll move the object, and after two to three seconds, the mentioned error message will appear and Windows will close Photoshop. This, however, only seems to happen after selecting, copying, and pasting part of a large object with some variation of the Marqee Tool (thus making that part a new layer by default) while working at a zoom of 100%. So, in short, working with a large image like <a href=http://www.wallpaper4me.com/images/wallpapers/ergo_proxy_267_1280-862301.jpeg>This</a> at 100% zoom. The image linked is the image that I was using and am currently using to reproduce the problem. It is 1280x1024 pixels. I have tested this with somewhat smaller, yet comparable images too. Same problem. I have never had this problem working with large images before, and I wonder if anyone has any suggestions short of formatting my hard drive.
    The error code, from Event Viewer:
    Faulting application name: Photoshop.exe, version: 11.0.2.0, time stamp: 0x4bf2d4f6
    Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
    Exception code: 0xc0000005
    Fault offset: 0x65637275
    Faulting process id: 0xe28
    Faulting application start time: 0x01cb2bb3471d87bf
    Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe
    Faulting module path: unknown
    Report Id: b412e368-97ab-11df-8f49-001d60b646ef
    Details:
    System
    Provider
    [  Name]
    Application  Error
    EventID
    1000
    [  Qualifiers]
    0
    Level
    2
    Task
    100
    Keywords
    0x80000000000000
    TimeCreated
    [  SystemTime]
    2010-07-25T05:15:57.000000000Z
    EventRecordID
    78845
    Channel
    Application
    Computer
    Gatherum
    Security
    EventData
    Photoshop.exe
    11.0.2.0
    4bf2d4f6
    unknown
    0.0.0.0
    00000000
    c0000005
    65637275
    e28
    01cb2bb3471d87bf
    C:\Program  Files\Adobe\Adobe Photoshop CS4\Photoshop.exe
    unknown
    b412e368-97ab-11df-8f49-001d60b646ef
    Details in XML View:
    - <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    - <System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2010-07-25T05:15:57.000000000Z" />
    <EventRecordID>78845</EventRecordID>
    <Channel>Application</Channel>
    <Computer>Gatherum</Computer>
    <Security />
    </System>
    - <EventData>
    <Data>Photoshop.exe</Data>
    <Data>11.0.2.0</Data>
    <Data>4bf2d4f6</Data>
    <Data>unknown</Data>
    <Data>0.0.0.0</Data>
    <Data>00000000</Data>
    <Data>c0000005</Data>
    <Data>65637275</Data>
    <Data>e28</Data>
    <Data>01cb2bb3471d87bf</Data>
    <Data>C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe</Data>
    <Data>unknown</Data>
    <Data>b412e368-97ab-11df-8f49-001d60b646ef</Data>
    </EventData>
    </Event>
    System Specifications:
    Operating System: Windows 7 Ultimate 32-bit (6.1, Build 7600)
    System Manufacturer: HP-Pavilion
    System Model: GN697AA-ABA a6214x
    Processor: Intel Pentium Dual CPU E2160 @ 1.80 GHz (2 CPUs)
    Memory: 2048MB RAM
    DirectX Version: DirectX 11
    Display Device:
    Name: NVIDIA GeForce 8600 GTS
    Manufacturer: NVIDIA
    DAC Type: Integrated RAMDAC
    Approx. Total Memory: 1010 MB
    Current Display Mode: 1440 x 900 (32 bit) (60 Hz)
    Photoshop Version: CS4 Extended 11.0.2

    Even a decent RAM upgrade is usually only a few hundred dollars nowadays, but it's not a trivially simple process.  That said, with a little research and care you can do it.  Alternatively, you can hire people (e.g., "Geek Squad") to do such an upgrade.
    First, you'll need to know what your operating system capacity is.  For example, a 32 bit Windows system can really only use up to a bit more than 3 GB of RAM, while a 64 bit Windows system can use all the RAM you can find a place to plug in.  What version of Windows are you running?
    Then you'll need to determine what RAM you have installed and what your computer's maximum RAM capacity is - usually you can do this through internet research, either by visiting your computer manufacturer's web site or doing google searches.  There are even RAM manufacturer web sites that will tell you what kind of RAM your computer needs and suggest sources, for example:
    http://www.kingston.com/
    It may be that you can just plug additional chips into currently empty sockets, or it is possible you'll need to replace the RAM chips you have installed in your computer to make room for an upgrade.  Every computer is different.
    If you list your computer model and current RAM that you have installed here, it may be that someone can help with more specific advice.
    -Noel

Maybe you are looking for