Adobe Photoshop CS3 and Leopard problem changing number values in the tools

I know that Adobe has mentioned on their site that this is a known problem and that the fix is going to come from a Leopard update. I have not seen anything on this problem from the Mac side so I am wondering when a fix can likely be expected. The Adobe link is http://www.adobe.com/support/pdfs/PhotoshopCS3_LeopardIssue.pdf
Any clue?

Welcome to the Apple Discussions!
This is a user-to-user forum, so no one here works for Apple. None of us have any idea what they have running behind the scenes. I'm afraid you're just going to have to wait and see like the rest of us. It's against the Terms of Use of the Apple Discussions to speculate about unannounced or unreleased products, but the Macworld Expo starts in San Francisco in a little more than two weeks. In the past, Apple has released software updates at the same time as the expo to support new software and hardware. No one here can speculate if this will include the update you're looking for, however.
-Doug

Similar Messages

Screen Flickering in Adobe Photoshop CS3 and CS4

I experience screen flickering in Adobe Photoshop CS3 and CS4 when I move my mouse around on the screen. Basically any mouse movement will create flickering. The more and faster I move my mouse the more flickering occurs.
System Specs
- Windows 7 64bit Ultimate
- Intel i7 3.2GHz Extreme
- ASUS Rampage II Extreme Mobo
- Corsair Dominator 6GB 1866MHz (Triple Channel)
- Dual eVGA Nvidia GTX 285 Superclocked Graphics Cards in SLI
- Dual 60GB OCZ Vertex Series SDDs in RAID0
- Corsair 1000Watt PSU
- CPU and both GPUs are water cooled
- Logitech G-15 Keyboard
- Logitech G-9 Mouse
- ASUS 26" LCD VK266H monitor (1920x1200 @ 60Hz) DVI
- I have the latest BIOS and all of the most up-to-date drivers installed for every piece of hardware.
I have photoshop set to use the maximum allowable amount of memory. The memory slider in photoshop maxes out at 3.25GB which equates to about 50% of my total system memory.
The screen flickering does not occur in any other application or game, only in Photoshop. I have tried every possible Nvidia Control Panel setting for this application, and nothing seems to have an effect on the flicker.
Does anyone have a solution to this problem, or any recommendations?

Aside from the potential SLI issue, you might want to study your Logitech mouse driver.
Going back a bit, several versions of the MS InteliPoint mouse driver caused just what you describe. I have not heard of this with Logitech, but did have some other issues with their SetPoint drivers. In my case, I ditched their keyboard, but kept the mouse (love it), and did away with SetPoint, using the generic driver. All functions that I needed were handled, and SetPoint was out of the equation.
Something else to look at, and good luck,
Hunt

I was loading a big file of photos from iPhoto to Adobe Photoshop CS3 and it keep collapsing, yet each time I reopen photoshop it load the photos again and cal laps again. is there a way to stop this cycle?

I was loading a big file of photos from iPhoto to Adobe Photoshop CS3 and more then midway it keep collapsing, yet each time I re-open photoshop to load a small amount of photos, it load the previous photos again, and again it collapse. is there a way to stop this cycle and start a new?

http://helpx.adobe.com/photoshop.html

Adobe Photoshop CS3 Extended Activation Problem

Hi all, hoping someone can help me.
I have a legitimate hard copy of Adobe Photoshop CS3 Extended which was only recently taken out of its sealed package.
On installing and trying to activate I get an error. Now i am left with a window telling me "Registration Unsuccessful"
Any ideas how i can go about solving this? I legally own this copy and I need to use it and can't do with it deactivating.
Thanks in advance for any help given. It's very much appreciated!

Mordynak I am sorry but I find no software titles registered under the Adobe ID/e-mail address you used to post to this forum. From this discussion it sounds like you have already utilized the process listed in Find your serial number quickly.
Please contact our support team directly at Contact Customer Care. If this link still fails then I would recommend utilizing a different web browser as the current add-ons, security settings, add-ons may be preventing a chat session from being made available to you.
If you continue to face difficulties then please update this discussion.

Installing Adobe Photoshop CS3 on Leopard (headaches really...)

Hi,
I'm a Tiger user and i have another Mac that runs Leopard. I have Photoshop CS3 on a Disc and used in to install on my mac with Tiger, then when i try with the mac that runs Leopard i run into some issues.
One Error Message states :
"The application Photoshop CS3
(beta10.0x20061208) [k] (Universal) quit
unexpectedly.
When i open the .Dmg on the disc (or when i drag it to the HD) i get the following message :
The Finder cannot complete the operation because some data
in "adobephotoshop1012-06.dmg" could not be read or
written.
(Error code -36)
If anyone can help me it'd be greatly appreciated. like i said i've done this before successfully on a freshly updated Tiger. this problem is new to me. thanks for reading.
-Ryan

*"The application Photoshop CS3*
*(beta10.0x20061208) [k] (Universal) quit*
unexpectedly."
For starters, you're using a beta version, dated Dec 8, 2006...which is not final and still contains bugs... CS3 was not released until Sprint 2007. and second, based on it's file name, your application appears to have been illegally "Kracked"...hense the [k].
If you do in fact have a valid legal license of Photoshop, you should probably post your question on Adobe's forums:
http://www.adobeforums.com

Another photoshop CS3 and Yosemite problem

Upgraded iMac to OS x 10.10.1 and now find that Photoshop CS3 (606) crashes after launch. It seems to make progress to the point where the menu bar is presented and then crashes. I've searched for others with this problem and tried various recommended fixes such as re-installing Java SE6, Java for OS X 2014-001, running the 'Reinstall Photoshop' utility . . . no change. Crash report includes;
Crashed Thread:        15
Exception Type:        EXC_BAD_ACCESS (SIGSEGV)
Exception Codes:       KERN_INVALID_ADDRESS at 0x0000000000000000
Any suggestions gratefully received. Thanks.

Welcome to the Apple Discussions!
This is a user-to-user forum, so no one here works for Apple. None of us have any idea what they have running behind the scenes. I'm afraid you're just going to have to wait and see like the rest of us. It's against the Terms of Use of the Apple Discussions to speculate about unannounced or unreleased products, but the Macworld Expo starts in San Francisco in a little more than two weeks. In the past, Apple has released software updates at the same time as the expo to support new software and hardware. No one here can speculate if this will include the update you're looking for, however.
-Doug

Photoshop CS3 and Mavericks problem?

Using photoshop CS3 in Mavericks and I get a ‘can't save file because it is already in use or was left open’ message when I try and save a photoshop file.
Found a fix online which is to turn off ‘Show preview column’ in show view options, but this is a pain because I like to have the preview with image and file info.
Is there a way around this, seems a strange way to get around this problem.

Welcome to the Apple Discussions!
This is a user-to-user forum, so no one here works for Apple. None of us have any idea what they have running behind the scenes. I'm afraid you're just going to have to wait and see like the rest of us. It's against the Terms of Use of the Apple Discussions to speculate about unannounced or unreleased products, but the Macworld Expo starts in San Francisco in a little more than two weeks. In the past, Apple has released software updates at the same time as the expo to support new software and hardware. No one here can speculate if this will include the update you're looking for, however.
-Doug

CS3 and Leopard problems.

Just made the jump from 10.3.9 to 10.5.2. Problem is when I open old Illustrator 10 files in CS3 the page setup is comletely lost. I have to manually set it up in the print dialog box. I have tried many different print drivers for my HP, nothing works.
Printing from Illustrator 10 works fine.
Help please.
Ulrich

Just made the jump from 10.3.9 to 10.5.2. Problem is when I open old Illustrator 10 files in CS3 the page setup is comletely lost. I have to manually set it up in the print dialog box. I have tried many different print drivers for my HP, nothing works.
Printing from Illustrator 10 works fine.
Help please.
Ulrich

"Problem with Trial - problem loading trial period for Adobe Photoshop CS3"

Hello,
I installed Photoshop CS3 Trial and whenever I run it and choose to begin my trial period I get the following error message:
"Problem with Trial - problem loading trial period for Adobe Photoshop CS3".
I tried uninstalling and reinstalling, and even ran the Adobe CS3Clean Script but nothing seems to help.
I should note I never installed any earlier version of Photoshop on my system (I use a fresh copy of Windows XP with only a few programs installed).
Any suggestions will be appreciated.
Thanks,
David

i had the trial of photoshop on and the trial has run out my friend has given me a disk with adobe photoshop on and i cant do it beacause of the regestry code the photoshop puts in after the trial has ended to tell my pc that i cant have photoshop on my computer again :(:( now i have herd that you can remove the codes but it is quite hard well iam willing for this challenge and if anyone could help me i would reall welcome your help or if anybody has got the link to a tutorial to tell me hoe to do it i would aprecitae that to thank you all very much and post bak soon please

Problem Reading Adobe Photoshop CS3 Extended In Windows

I have Windows 7 and Photoshop CS3 Extended; can't read .psd file; error says not a supported file type; need to work with layers. When installed, received a Successful message upon installation. A solution to reading .psd files in Windows?

Thanks to both of you for responding. The files I am referring to are loaded to my C drive from ADOBE PHOTOSHOP CS3 "CLASSROOM IN A BOOK" tutorial. On the cover, it says "The official training workbook from Adobe Systems". I don't know what to do at this point. I'm ok with Html. Just need photoshop knowledge added and understand usde of .psd files provides a means to work with layering. Any suggestions?

White Lines appear on Images in Adobe Photoshop CS3

White Lines appear on Images in Adobe Photoshop CS3
Recently discover that on three different computers, while editing images in Adobe Photoshop CS3, white lines would appear on some of the images.
For example changing a image from a .jpg to a .psd or size, or enchantment features, the white lines would appear on the image.
The lines did not appear on any of the printed images, any suggestions.
Monitor: Sony Trintron Multiscan G4110
Computer: Mac G5

>The lines did not appear on any of the printed images,
Although it is odd that three computers exhibit the same problem, and unless you can provide other coincidences (same files, same monitor, etc.), I agree. The video card is typically the culprit IF the image anomalies don't print and if they move about with each image resizing or opening of a specific image. Check to see if it's properly seated and connected. Same for monitor cable. Try swapping in another card.
One other thought: as this is a CRT monitor, what happens if you change the resolution and refresh rate? Are you using a recommended combination for that monitor?
Neil

"Edit in Adobe Photoshop CS3″ a JPEG?

Hey, I have a problem: when I try to "Edit in Adobe Photoshop CS3″, and select "Edit a Copy" It doesnt open in Photoshop CS3 a .PSD file: it opens a .JPG file.
I'm viewing an JPEG, and I have selected to copy as PSD.
Is that ok? Comments? Thanks!
PC - Vista - LR 1.3.1

> I have a problem: when I try to "Edit in Adobe Photoshop CS3″, and select "Edit a Copy" It doesnt open in Photoshop CS3 a .PSD file: it opens a .JPG file.
To my way of thinking, this is correct behavior. When it's opened in PS, it *is* a JPEG to start with. You do your edits, then you SAVE as whatever you want. If you want it back to a JPEG, Save as, otherwise, you can save as PSD or TIFF and you won't have lost anything due to re-compression.
Converting a JPEG to PSD only to open it immediately in PS does nothing positive, and is just an extra step.

Adobe Photoshop CS3 collapse each time it load a big file

I was loading a big file of photos from iMac iPhoto to Adobe Photoshop CS3 and it keep collapsing, yet each time I reopen photoshop it load the photos again and collapse again. is there a way to stop this cycle?

I don't think that too many users here actually use iPhoto (even the Mac users)
However, Google is your friend. A quick search came up with some other non-Adobe forum entries:
.... but the golden rule of iPhoto is NEVER EVER MESS WITH THE IPHOTO LIBRARY FROM OUTSIDE IPHOTO.In other words, anything you might want to do with the pictures in iPhoto can be done from *within the program,* and that is the only safe way to work with it. Don't go messing around inside the "package" that is the iPhoto Library unless you are REALLY keen to lose data, because that is exactly what will happen.
.....everything you want to do to a photo in iPhoto can be handled from *within the program.* This INCLUDES using a third-party editor, and saves a lot of time and disk space if you do this way:
1. In iPhoto's preferences, specify a third-party editor (let's say Photoshop) to be used for editing photos.
2. Now, when you right-click (or control-click) a photo in iPhoto, you have two options: Edit in Full Screen (ie iPhoto's own editor) or Edit with External Editor. Choose the latter.
3. Photoshop will open, then the photo you selected will automatically open in PS. Do your editing, and when you save (not save as), PS "hands" the modified photo back to iPhoto, which treats it exactly the same as if you'd done that stuff in iPhoto's own editor and updates the thumbnail to reflect your changes. Best of all, your unmodified original remains untouched so you can always go back to it if necessary.

Adobe Photoshop CS3 has stopped working... HELP?

Everytime I try to make a GIF, and I select the length of the video, and press okay, a box comes out saying: Adobe Photoshop CS3 has stopped working. I've tried the "CTRL-ALT-SHIFT," but it doesn't work! Please help? ):
I make a GIF like this: File-Import-Video Frames to Layers.
Oh, and I have a Adobe Photoshop CS3 Extended.

You'll probably going to have to uninstall, then re-install the application; but you need to provide a lot more information;
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Photoshop CS3 and Photoshop Elements 7

I have my Adobe Photoshop CS3 and then i install the trial version of Photoshop Elements 7.0. Is this possible and allowed? Then i decide to uninstall the trial version of PSE7. And some of the logo of PSCS3 are already not supported anymore. I was alarmed so i reinstall again the PSE7, but the logo for my PSCS3 files (.psd) becomes the logo of the PSE7.
What will i do to retrieve my PSCS3 file logo and not the PSE7 one? Im really frustrate. thanks...i can visit here again for response give an email message.
grace
[email protected]

Thanks for the info. I don't have any plan to have them both in my programs, i am just curious about the PSE7. Im stick to my PSCS3. So, is the best thing i can do is to uninstall both and then reinstall my PSCS3?

Adobe Photoshop CS3 and Leopard problem changing number values in the tools

Similar Messages

Maybe you are looking for