Adobe Photoshop CS3 bzw. Upgrade CS6 verkaufen wie?

ich möchte Adobe Photoshop CS3 bzw. Upgrade CS6 verkaufen wie?

Ja, nur die Lizenz muss übertragen werden. Mehr hier: https://helpx.adobe.com/de/x-productkb/policy-pricing/transfer-product-license.html

Similar Messages

  • I'm trying to insall Adobe Photoshop CS3 on a new ASUS ASM11BB001O computer equipped with 64-bit Windows 7.  I use a "bundle" approach, first loading Photoshop 6, then upgrading with CS upgrade and then CS3 upgrade.  The installation goes smoothly until I

    I'm trying to install Adobe Photoshop CS3 on a new ASUS ASM11BB001O computer equipped with 64-bit Windows 7.  I use a "bundle" approach, first loading Photoshop 6, then upgrading with CS upgrade and then CS3 upgrade.  The installation goes smoothly until I add PS CS, and then it balks at the "accept" Adobe conditions screen.  I have two other (Gateway) computers with Windows 7, 64-bit, on both of which the PS-6, CS-CS3 pathway worked fine.  Any thoughts on how to get this working?  Thanks

    If your goal is to install and activate CS5 there is no need to install anything preceding it.  You will only need to have the serial number from the preceding version that you upgrade from (CS3 I guess).

  • I have switched from PC to Mac how do i use my windows version  of adobe photoshop CS3 on my MAC?

    i have switched from PC to Mac how do i use my windows version  of adobe photoshop CS3 on my MAC?

    rebel1568,
    All Photoshop versions through CS6 came with platform-specific licenses, either Windows or PC.  You could get a cross-grade of platform swap at a nominal cost but not for older versions, only for whatever Photoshop versions was current at the time.
    CS3 is totally out of the upgrade or cross-grade loop.  You'd have to buy a new license for CS6 Mac or subscribe to Photoshop CC, as Trevor points out.
    Curt Y is correct in that CS2 will not run on current Mac-Intel machines.  You would need a used Mac G5 or G4 with a PowerPC (IBM) CPU, which have been obsolete since mid 2006.
    Of course, you could run your Windows  on your Mac if you installed and ran BootCamp or Parallells.

  • Adobe Photoshop CS3 has stopped working... HELP?

    Everytime I try to make a GIF, and I select the length of the video, and press okay, a box comes out saying: Adobe Photoshop CS3 has stopped working. I've tried the "CTRL-ALT-SHIFT," but it doesn't work! Please help? ):
    I make a GIF like this: File-Import-Video Frames to Layers.
    Oh, and I have a Adobe Photoshop CS3 Extended.

    You'll probably going to have to uninstall, then re-install the application; but you need to provide a lot more information;
    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Adobe Photoshop CS3 Extended freezes on startup under Windows 7 Ultimate 64-bit - No splash screen

    I installed my licensed copy of Adobe Photoshop CS3 Extended today as part of my install a bunch of software after a reinstall of Windows (due to viruses).  I did a completely fresh install of Windows 7 Ultimate 64-bit.  I've used Photoshop CS3 Extended for quite a while now so I know what to expect on startup but it was previously installed under Windows XP Professional (32-bit). Figured I would give Windows 7 a chance this time around.
    Google searches aren't turning up anything.  When I attempt to start the application, I get a window with the title "Adobe Photoshop CS3" (no "Extended" - I seem to recall the title changes later) and the toolbar appears.  However, no splash screen appears and no Product Activation wizard appears - the application simply freezes on an empty frame and a toolbar.  I've tried running Photoshop as Administrator (right-click, "Run As Administrator"), but nothing changed there.  I tried uninstalling and reinstalling.  I tried upgrading to CS3 10.0.1.  Nothing works.  The application simply freezes before it gets anywhere.
    I tried calling Adobe Support since this technically falls under installation issues but their phone support systems are down today.  Go figure.
    Edit:  I hooked into Photoshop with the Visual Studio debugger and every single thread is executing some variation of WaitForSingleObject() or WaitForMultipleObjects().  The main thread is "executing" somewhere in AdobeLM_libFNP.dll (at address 09619d81 - if I had debugging symbols for CS3, I could provide a function).  There are nine threads "running" at the point the freeze occurs - but all of them are technically suspended due to the functions they are executing - and one thread is in a suspended state.

    Log Name:      Application
    Source:        Application Hang
    Date:          7/17/2010 6:16:25 PM
    Event ID:      1002
    Task Category: (101)
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Description:
    The program Photoshop.exe version 10.0.1.0 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
    Process ID: d0c
    Start Time: 01cb2616be79e36f
    Termination Time: 2
    Application Path: C:\Program Files (x86)\Adobe\Adobe Photoshop CS3\Photoshop.exe
    Report Id: 06f5fbff-920a-11df-9d69-001fd023417e
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Application Hang" />
        <EventID Qualifiers="0">1002</EventID>
        <Level>2</Level>
        <Task>101</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2010-07-18T01:16:25.000000000Z" />
        <EventRecordID>1615</EventRecordID>
        <Channel>Application</Channel>
        <Security />
      </System>
      <EventData>
        <Data>Photoshop.exe</Data>
        <Data>10.0.1.0</Data>
        <Data>d0c</Data>
        <Data>01cb2616be79e36f</Data>
        <Data>2</Data>
        <Data>C:\Program Files (x86)\Adobe\Adobe Photoshop CS3\Photoshop.exe</Data>
        <Data>06f5fbff-920a-11df-9d69-001fd023417e</Data>
        <Binary>430072006F00730073002D0074006800720065006100640000000000</Binary>
      </EventData>
    </Event>
    And, according to the Event Viewer, the "Binary" data translates to a zero-terminated Unicode string of "Cross-thread".
    My Visual Studio analysis was far more informative.  All threads are hung inside of WaitForSingleObject() and WaitForMultipleObjects() calls and the DLL in question appears to be FlexNet-related.  I did forget to mention that I also even manually started the FlexNet service in case, for some strange reason, Photoshop was waiting for it to start.  That also did not work.
    (And there is nothing in the Action Center control panel either despite the message saying there might be more information there.)
    Edit:  The timestamp above might be a little odd-looking.  I didn't originally see anything in Event Viewer until I clicked the first button to send an Error Report.  Mostly I just skipped that part of killing a process.

  • Adobe Photoshop CS3 has stopped working: A problem caused the program to stop working correctly.

    I recently purchased a new desktop computer and installed Adobe CS3 Master Edition on it and I get the following error:
    Adobe Photoshop CS3 has stopped working: A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
    Out of the entire suite of tools only Photoshop will not launch. The weird thing is i also had the same Adobe programs installed on my laptop and I have not made any installation updates to that machine and i am getting the same error. I have always installed the same software on my two home machines with no problem until now. Any help is appreciated.
    Thanks,
    Andy

    You'll probably going to have to uninstall, then re-install the application; but you need to provide a lot more information;
    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Adobe Photoshop CS3 had encountered a problem V10.0.0.0

    Photoshop V10.0.0 will not open. It crashes as its loading the Twain drivers at start up. I am running Windows XP.
    I've tried deleting the preferences file, reloading Photoshop and, as a desperate measure, deleting and reloading CS3. Nothing has worked. I tried upgrading photoshop but still no luck. Set my default printer to PDF, still nothing. Disabled my firewall, still nothing.....
    The worst bit is its been working quite happily since June 07 and then in late Nov early Dec it decided not to work. I also had a printer problem during this time and reinstalled the printer software, but photoshop wasn't working before I did that.
    The error I get is:
    Adobe Photoshop CS3 has encountered a problem and needs to close
    Error signature App Name: photoshop.exe
    AppVer 10.0.0.0
    ModName: unknown
    ModVer: 0.0.0.0 Offset 0.0.0.0.0.0.0.4
    Any assistance would be great - I am getting desperate!
    Regards
    Sally

    When I uninstalled my Dell 944 printer Photoshop worked. When I reloaded my printer it crashed again. It seems to crash everytime it loads the TWAIN part of the photoshop opening screen.
    I've tried downloading and installing the latest driver from Dell for the printer but its 2005 and the same as the one I have so no luck there.
    I still need my printer to work (its my scanner as well) but I am desperate to get Photoshop back! Any clues??

  • Adobe Photoshop CS3 crashing at open file screen

    Hi all
    I've searched online but can't find a relative discussion or solution.
    I have Adobe Photoshop CS3. My system is Windows 7 and it's 64-bit (that's about as far as my hardware/technical knowledge goes...).
    The problem has only started happening today. Open PS, and go to FILE>OPEN. A sub screen is opened. On the left of this sub-screen are a variety of short cut locations such as 'My Documents', 'My Pictures' and 'My Computer'. Clicking on any of these shortcut tabs results in PS crashing.
    The only thing I can think of that has changed since the last time I used PS CS3 on my machine (and I use it daily) is the following:
    Installed trial version of Autodesk AutoCAD LT 2014
    From this, to watch a Flash video of AutoCAD demo I had to download the latest version of Adobe Flash Player (it was 2011 I believe).
    Following the CS3 crashing problems I uninstalled Flash player and re-started but still no luck.
    Have not touched AutoCAD yet.
    Any thoughts / comments? My company is looking to invest in AutoCAD so CS3 will need to learn to live alongside AutoCAD (IF AutoCAD is the problem, but I think this is unlikely).
    Let me know what you all think!
    Thanks
    David

    Thanks for all the replies.
    We (myself and our company IT guy) just tried several of the above, plus some other things.
    1. Shift/ctl/alt reset preferences. Did not solve the problem.
    2. Video driver upgrade. Did not solve the problem.
    3. Complete reinstall of CS3. Did not solve the problem.
    4. Install old video driver (apparently this solved a similar problem in another area of the company). Did not solve the problem.
    5. System rollback/restore (to 20-11-2013 settings). PROBLEM SOLVED!
    We have a suspicion therefore that the Autodesk AutoCAD LT 2014 may be something to do with it. We will find out later/tomorrow as I need to get some stuff done in CS3 now (can't afford more lost time!).
    Will update once we have reinstalled AutoCAD LT 2014 as to whether this changed anything.
    Thanks again
    David

  • Access to Adobe Photoshop CS3 w/ Adobe Creative Cloud

    Is there a possibility to have access to Adobe Photoshop CS3 with my Adobe Creative Cloud account?

    No.
    Only CS6, CC and CC 2014.

  • We lost our DVD with distributive of Adobe Photoshop CS3 ( redacted by mod-kglad , 8 license).

    We lost our DVD with distributive of Adobe Photoshop CS3 (<partial license number redacted by mod - kglad>). What can we do for get new one (DVD) or can yousuggest another way for install programme (exclude buying new version like CS6)?

    Thanks, but if you didn't see aboove ("the last one PC with Adobe Photshop CS3 installed in 2008 (with our serial) - chapters "Load e-License..." and "Return e-License..." was not active (in Menu "Help")",look at the screenshoot  ("ps cs3>click help>...") from this PC:
    As you see, there are no any "deactivate" (in Russian it means "Деактивировать") there.
    Read the following answers from http://www.adobe.com/support/chat/ivrchat.html, please. It was on 25 oct 2013:
    You are now chatting with Vijay Kanna .
    Vijay Kanna : Hello! Welcome to Adobe Customer Service.
    Vijay Kanna : Hi Ilia.
    Vijay Kanna : Please allow me a moment while I  review your request.
    Ilia: Hello! Ok, I'm waiting.
    Vijay Kanna : I have read your request.
    Vijay Kanna : I will be glad to help you with the information.
    Vijay Kanna : I would first like to inform you that this application you have is a Volume Licensing Product for CS3 for which its not possible to make changes on the license activation seats.
    Vijay Kanna : Usually the Volume Licensing Product will not provide such error as this type of error will only show up with retail (single) user application.
    Vijay Kanna : If you use the correct download link from the licensing account for this particular application or the CDs for this particular application you will not get such errors.
    Ilia: Ok. Where I can download distributive of CS3 (we lost our box with CD or DVD)?
    Vijay Kanna : If the CDs are lost and you have not purchased the application as a download then its not possible to find the download link for this application now as the current shipping version with Adobe is CS6.
    Vijay Kanna : Adobe at the moment only has the CDs and download link for CS6.
    Ilia: It means that we couldn't install our CS3 on new PC? What can we do in this case?
    Vijay Kanna : You will have to locate the original CDs or your next option is to purchase the current version which is CS6.
    Vijay Kanna : Also the CS3 is not compatible on Windows 7 or any other latest OS.
    Vijay Kanna : Is there anything else I can help you with?
    Ilia: Yes? wait a momemt please/ I consult with my boss/
    Vijay Kanna : Okay.
    Vijay Kanna : Are we still connected?
    Ilia: Yes
    Vijay Kanna : Okay.
    Vijay Kanna : Do you have any further questions for me today?
    Ilia: Yes, wait a moment.
    Vijay Kanna : Sure. I will stay online.
    Ilia: My colleague claims that a distribution kit with which we install the program on new PC is copied from lost CD.
    Vijay Kanna : Ilia, the application is not installed this way. Also this error which you say "exceeded allowable activation" is not for a Volume Licensing Product and such error is only associated with the single user application.
    Vijay Kanna : Hence, the installation file you have should be incorrect and for a single user application.
    Ilia: Ok, thanks. We will try to find CD. Good-bye.
    Vijay Kanna : You are welcome.
    Vijay Kanna : Please click again to check with us, if we can be of further help.
    Vijay Kanna : We will be glad to check and help you.
    Vijay Kanna : Thank you for chatting.  Goodbye.
    Chat InformationThis chat session has ended.
    Thank you for contacting Adobe."
    PS: Finaly, we lost our CD or DVD (with box), we have only serial number and bild (was purhased 2008), nothing else. I tried to finding the same as we lost distributive via Google, etc a lot of time, but trere is no success.

  • PhotoshopNews: Adobe Photoshop CS3 at a glance!

    http://photoshopnews.com/2006/12/14/adobe-photoshop-cs3-at-a-glance/
    Even more content out there now on the home page of PhotoshopNews.com

    I haven't been able to download CS3 yet, but the Martin Evening pdf (thanks for the link!) has what looks like a piece of great news buried in it:
    "For example, before you first had to create an empty new document with the exact pixel dimensions before you could place an image (such as a raw file) as a Smart Object. With Photoshop CS3, you can now place a raw capture file as a Smart Object layer in a single step."
    If I understand this right, it means that the functionality of the old Dr Brown Place-a-Matic script is now available from Aperture. We can -- or this makes me hope we can -- send a RAW from Aperture to PSCS3 for editing, and then Place the same image, perhaps twice, as a Smart Object, edit away, and when we Save get the whole edited image back in Aperture without going through the Finder.
    I used to use this (from Bridge) all the time to double-expose RAW shots: adjust the sky to one exposure and the ground to another, masking to get both into the final image, all without messing with the pixels of the RAW image. I've missed it. Whoopee.

  • Adobe Photoshop CS3 Extend Error

    I had to re install Adobe Photoshop CS3 Extend but now every time I try to start it, it errors out withe the following:
    "Could not load the user measurement data point presets file because the file name was not valid."
    and "Could not load the user measurement scale presets file because the file name was not valid."
    Any assistance would be appreciated. Thanks!

    (no reinstalling doesn't reset the preferences...) :)

  • Adobe Photoshop CS3 MSI Error

    Hello,
    I have been getting the wierd error when I try to install Adobe Photoshop CS3 using the MSI package that I created.
    Could not write value data to key \SOFTWARE\Microsoft\WindowsNT\CurrentVersion\Schedule\Handshake\{GUID}. Verify that you have sufficient access to that key or contact your support personel.
    This error happens regardless of who is trying to install the MSI pacakage (regular account or Administrator). I even tried to give explicit permission to the regkey, however OS prevents me to do so. I would really appreciate if any of you have seen this error and guide me.
    Thank you in advance.
    Dipu

    "using the MSI package that I created."
    Have you tried installing without that, it may be a problem there.
    "regular account or Administrator"
    Have you tried creating a new account or using the actual 'Administrator' account (not an account with Administrative permissions)?

  • "Edit in Adobe Photoshop CS3″ a JPEG?

    Hey, I have a problem: when I try to "Edit in Adobe Photoshop CS3″, and select "Edit a Copy" It doesnt open in Photoshop CS3 a .PSD file: it opens a .JPG file.
    I'm viewing an JPEG, and I have selected to copy as PSD.
    Is that ok? Comments? Thanks!
    PC - Vista - LR 1.3.1

    > I have a problem: when I try to "Edit in Adobe Photoshop CS3″, and select "Edit a Copy" It doesnt open in Photoshop CS3 a .PSD file: it opens a .JPG file.
    To my way of thinking, this is correct behavior. When it's opened in PS, it *is* a JPEG to start with. You do your edits, then you SAVE as whatever you want. If you want it back to a JPEG, Save as, otherwise, you can save as PSD or TIFF and you won't have lost anything due to re-compression.
    Converting a JPEG to PSD only to open it immediately in PS does nothing positive, and is just an extra step.

  • Adobe Photoshop CS3 crashing on start-up

    When starting Photoshop CS3, I can get all the way to the "Initializing shared components" message before the program crashes and has to close. It does this during every start-up. The only major changes I made before the problem began was I uninstalled a Microsoft Office trial version, and also installed Vista Service Pack 1. Does anyone know of a way to fix it?
    System details:
    Microsoft Windows Vista Home Premium Service Pack 1 (32 bit)
    1GB RAM
    Adobe Photoshop CS3 Extended V.10.0

    Try resetting your preferences as described in the FAQ.
    http://www.adobeforums.com/webx/.ef4a07f/1
    You either have to physically delete (or rename) the preference files or, if using the Alt, Ctrl, and Shift method, be sure that you get a confirmation dialog.
    This resets all settings in Photoshop to factory defaults.

Maybe you are looking for