Adobe Photoshop CS4 installation options

Hi,
I am preparing an unattended installation of Photoshop CS4. I generated the xml files using the command "setup.exe" --record=1.
Now I will create a bat file to execute the setup with the following sentence:
"setup.exe" --mode=Silent --deploymentFile="AdobeCS4\payloads\install.xml" --skipProcessCheck=1
I only know the argument "Silent" to apply to the "--mode", my question is: There are other arguments to apply on it?
PD: forgiveme if my english isnt very correct

You have a conflict with a CS2 product or a problem with your system's language settings. For the first case, download the Microsoft Installer Cleanup Utility, run it and remove all instances of Adobe Setup 2.0 that may be on your system. for the second case, set your system to a consistent standard language like US English and also make sure to pick that same language during install. Do not use odd combinations of your system running e.g. in Hindi and trying to install in French.
Mylenium

Similar Messages

Adobe Photoshop CS4 Installation Error

I'm new to this site and my computer has Vista Home Premium Service Pack 1.
After I installed Photoshop CS4 trial, it failed to install Photoshop, but the rest were successful. I went to get more information and this is the message:
Adobe Fonts All
Error:
Error 1603. Error 1907.Could not register font . Verify that you have sufficient permissions to install fonts, and that the system supports this font.
Adobe Photoshop CS4 English Language Pack
Error:
Error 2.
If there is a topic similar to this one, then I shouldn't be here!

I have been using Adobe Photoshop CS4 for a few months now without any problems or errors.
But last week.. i had a virus problem and decided to do a Clean Installation of my Operating System.
I was not too worried because I have done this millions of times already... and know the process like the back of my hand.
Well.. after the clean installation was complete, i started to load my applications.
To my surprise.. Adobe Photoshop CS4 would not install. Nor would Adobe Illustrator CS4.
It would get to the screen "Adobe is beginig the installation process" and would stall ..
At first... i thought it would eventually complete on it's own.. but after a few attempts and hours of the same screen with no progress.. it was obvious Adobe was no longer responding at that stage.
I searched high and low, night and day, over a few days trying to figure out the problem.
I was trouble-shooting everything.
In the middle of trouble-shooting, i took a break to surf the Net and see if i could find any suggestions when i ran into this Forum.
Someone mentioned disabling your Internet Security & Windows Defender.. and i thought.. no way.. it can't be that easy.
Well.. what do you know.. it was my Internet Security (Kaspersky Internet Security 2010)
After disabling Kaspersky Internet Security 2010, Adobe flew right pass the part where it was stalling, and finished installation without incident.
Adobe Illustrator CS4 also installed without any problems ...
I just wanted to share my experience as i know how frustrating it can be when software refuses to install.
Good Luck to everyone.. be patient.. trial & error. .. and im sure you'll figure it out.
========================================================================================== ===============
ApologetX wrote:
"downloaded Photoshop CS4 here and i tried to install as trial (30 days), Error: "Please insert Photoshop C4 into drive E:/ to continue instalation" what's wrong? What should I do? To install free trial? Tks"
@ ApologetX
I had a similar problem when i extracted the contents of my Adobe DVD and made an ISO file out of it so i would no longer need the DVD for installation.
But what i realized is that.. Adobe will not install if it's installed from the ISO.. and during installation.. an error would pop up.. and ask for the DVD
You probably have done something similar.
Here's what i did to fix:
- Extract the contents of Adobe Photoshop CS4 into a Folder
- and install from that ..
After i extracted the contents and installed from "setup.exe" .. the installation completed without error ..
DVD
- If you're having problems from the DVD .. then try to extract the Contents of the DVD on to your Desktop..
and install from there ..
Trial Installer
- As for the Trial you are referring to .. im not familiar with it ..
but try to extract the contents of it to your Desktop .. and go from there ..
Good Luck

Photoshop CS4 Installation Crash Issues

Hey all.
I was installing the trial version of CS4 (on Vista) when my power went out. When I tried to install again, I kept getting this error message:
>- undefined
>- The installer database is invalid: please re-install the product from the original media
I checked the log and these are the errors I picked up:
>Failed to create payload session.
>Unable to load fileOptions from C:\Program Files (x86)\Common Files\Adobe\Installers\faf656ef605427ee2f42989c3ad31b8\resources\pages\Install\Options\Op tions.js
>Critical errors were found in setup for Adobe Photoshop CS4:
>Localization: missing stringID "undefined" for en_US in C:\Program Files (x86)\Common Files\Adobe\Installers\faf656ef605427ee2f42989c3ad31b8\resources\main.xml
>Localization: missing stringID "undefined" for en_US in C:\Program Files (x86)\Common Files\Adobe\Installers\faf656ef605427ee2f42989c3ad31b8\resources\main.xml
I've tried a ton of different *solutions* to try and fix this. My attempt to uninstall via control panel failed, i got the same error message is the install. I can't find any CS4 folders in the regedit, so that didn't work. I downloaded windows install wizard utility, ran that, as well as the adobe cs4 cleanup script.
I manually deleted the common files > installer folder. I even uninstalled the illustrator CS4 trial.
Lastly i did a system restore.
Nothing seems to work.
Any suggestions?
Thanks in advance!

Could You post the file (provided it’s not too big) or at least a screenshot of the 3D (Materials)-Panel with some of the problematic Material selected?

Can't Activate ADOBE PHOTOSHOP CS4 UPG

Hello,
I have been using Photoshop ever since version 7 (having switched over from Corel's software, used previously for about 10 years) and had success with it.
I upgraded to ADOBE CREATIVE SUITE when it became available through the Adobe upgrade option and used that with equal pleasure.
In 2010 I upgraded to ADOBE PHOTOSHOP CS4, again by means of an upgrade version with no trouble.
I have switched to a newer, faster computer last week, but I have been unable to re-install my Photoshop CS4 on my new computer because I am not able to activate the program.
When I tried to install the program it refused to activate based on the serial number of my Creative Suite, stating that it was not a valid serial number for this product.
I have successfully installed this product in the past, more than once, using that same CS serial number with no problem arising until now.
I am requesting your assistance to get back to being able to use ADOBE PHOTOSHOP CS4, which after all I did purchase in good faith.
I am now retired and living on a fixed income which does not allow me the flexibility to purchase replacement software indiscriminately and I really need your help to solve this problem.
Please advise me of a solution or a workaround so that I can still use my software.
Thank you very much for your kind assistance.

it's not clear in your post, but it appears you may own a stand-alone ps version (cs4) and some creative suite version.
if your ps cs4 is part of a suite, you need to use the suite installation files and suite serial number. if your ps cs4 is a stand-alone, you need to use the stand-alone ps cs4 installation files and stand-alone serial number.
Downloads available:
Suites and Programs: CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5 | 4 | 3
Captivate: 7 | 6 | 5
Download and installation help for Adobe links https://helpx.adobe.com/download-install.html
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Hello I have install photoshop CS4 ( 11) but when I try to install last updates it show me am message ( Adobe Photoshop CS4 not installed ) ?! but its installed and I use it see Attach

hello
I have install photoshop CS4 ( 11)
but when I try to install last updates it show me am message ( Adobe Photoshop CS4 not installed ) ?!
but its installed and I use it ><
see Attachment

Please do not use the post title to post the entire question (no offense, it just makes the forum look ugly). As for your question - you really did install it? I mean with serial and install disc? If so, the update would work, because it would find the proper install info. That not being the case, there are a few things that may be wrong:
- due to you language settings, the installer cannot find the folder because it has a different name (though on Vista, that shouldn't be an issue)
- at some point, you used the CS4 Clean Utility/ Script to remove install info
- you are using a pirated copy that you may have bought on eBay or elsewhere that has a modified installer to circumvent licensing
- you are using an unlicensed version a "friend" gave you and that never was installed, but merely copied to the harddrive
That pretty much covers the immediate options, now it's up to you to tell us, which one may apply. Assuming, we are talking about perfectly legit software, re-installing it from the original media should take care of the problem. For illegal software, you should understand, that you are utterly on your own and nobody will help you, much less on the forums of the company producing the software.
Mylenium

Adobe Photoshop CS4 runnig error - cant load files

hi,
ive first time installed adobe cs software in my pc. i have never used this software before nor its previous version.
when i try to run adobe photoshop cs4 - it gives me error after loading for few things that "A required application library failed to load and the product cannot continue, please re-install the application"
ive re installed the application several times but that same error continues.
any help will b welcomed
thank you

OK. This error drove me nuts and I have seen a thousand different "solutions" posted on various forums (none of which actually worked), but I think I found the magic bullet for this problem. This appears to be a result of corrupted/missing language pack files. Here's what I did to resolve it once and for all!
You should already have a folder somewhere with the contents/Setup.exe for CS4 Design Premium
Download the trial version of Adobe Photoshop CS4 Extended
Unpack the contents to a folder/directory somewhere on your PC
You will NOT be installing the Photoshop CS4 Extended application - only copying some files.
Copy the "extensions" folder from Photoshop CS4 Extended, that you just downloaded to your CS4 Design Premium folder (there should be an "extensions" folder already there as well)
Select yes if prompted to replace existing files/folders.
Double-click the Setup.exe in your CS4 Design Premium directory and re-start the installation of Photoshop from there.
Problem should be solved.

Problem installing Adobe Photoshop CS4. Please help me.

Hi Geeks,
I am stuck with Adobe Photoshop CS4 (Trial) installation since last two days. I am desperately looking for help to get rid of this problem.
My Problem:
At the end of installation of Adobe Photoshop CS4 (Trial) i was prompted with en error
message stating some of the components were not installed. When I check the more information button provided in the error message window, it showed below error.
“Adobe Photoshop CS4 English Language Pack Error: Error 2.”
Still I could find the installed Photoshop in C:\Program files\Adobe\Adobe Photoshop CS4\Photoshop.exe
When I executed above file; application showed below error message and close it.
“Some of the application components are missing from the application directory, Please reinstall the application.”
I just try to run Adobe Device Central CS4 which was installed along with it. It showed below error message.
“The Localized resource files for this application could not be loaded. Please reinstall or repair the application and try again.”
So My Problem is I am unable to open Photoshop CS4 after its unsuccessful installation.
I spent more than a day in different ways as I explained below in more info section. I am desperately looking for helping hands to fix this problem.
I ever find this kind of difficulty with any other components installation in my 10 years of development experience. Please help me.
More info:
(1) I have downloaded Adobe Photoshop CS4 (Trial) in this month (July 09) from adobe official site.
(2) My PC OS Windows XP SP3.
(3) Prior to install Photoshop CS4 I had Acrobat reader 8 and Adobe DW CS4.
(4) After I read some stuff on net, I downloaded both Windows install Clean up and CS4InstallerDatabaseUtility.exe.
(5) First I uninstalled all DW CS4 and Photoshop CS4 using add/remove then rebooted.
then ran CS4InstallerDatabaseUtility.exe (which really did not removed as it did not
find any Adobe component), then installed Photoshop CS4. No luck. same error.
(6) This time I ran CS4InstallerDatabaseUtility.exe and removed DW CS4, Photoshop CS4 and flash and rebooted. Then I ran Photoshop CS4 as Administrator. Same thing repeated at the end of installation and when I tried to open the photoshop. Finding a real hard time with it.
Any kind of help to get rid of this problem would be highly appreciated.
Thanks in advance.
Regards,
R Sunil.

PS CS4 software itself has to be installed as Admin. Put the downloaded folder on the desktop (if not there already). Open the folder and right click on the .exe file and choose run as Admin.
Install on C drive is the best stable choice.
Before you do all this make the anti-virus is turned off. If windows defender is running turn that off too. If Adobe reader is installed renove that. Ensure no other adobe products are running in the background.
During install the process will hang at 90 percent for about 10 to 15 mins. This is normal.
After the software is installed reboot computer.
After reboot go to start, All Programs and right click on PS CS4. Click on properties, Compatibility and check run as Admin. Hit Apply and OK to close. Run PS CS4 and update to 11.0.1
Be Advised:
Now the biggest problem you might run into is that the trial install went too far and failed. If this happened you cannot re-install PS CS4 trial because of the DRM that is hidden in the registry hive. The hidden DRM prevents people from installing the trial more then once and limits the trial at 30 days. There is nothing you can do other then nuking the hard drive and a fresh install of your operating system.

Lr 4.1 won't "Edit in Adobe Photoshop CS4" properly

Hello,
Using Lr 4.1 w/ Camera RAW 7.1 and Photoshop CS4 11.0.2... When I try to edit a RAW file in Ps as I always have in Lr 3.x (Right click film strip >> Edit In >> Edit in Adobe Photoshop CS4) I get the following message:
This version of Lightroom may require the Photoshop Camera Raw plug-in version 6.7 for full compatibility. Please update the Camera Raw plug-in using the update tool available in the Photoshop help menu. [Button options are: Render using Lightroom, Open Anyway, and Cancel.]
Render using Lr just keeps me in Lr, doesn't open Ps.
Open Anyway opens Ps, but not the image.
Using Ps >> help >> updates: says there are no updates.
But help >> About plug-in >> Camera Raw: shows it is only Version 5.7.0.213
Interestingly, if I go back to Lr and hit Edit in Adobe Photoshop CS4 >> "Render using Lr" and then immediately do it again, this time clicking "Open Anyway" it actually DOES open the image in Ps. I can edit and then when I save it takes a long time to write the TIFF format (several times longer than when previously editing through Lr 3.x),
Is there a fix for this so I don't need to do multiple steps to edit from Lr to Ps? And is there a way to update the Camera Raw in Ps from 5.7.0.213 to 6.7 since Ps>>help>>updates doesn't catch it?
Thanks!
Mike
System info from Lr>>system info:
Lightroom version: 4.1 [829322]
Operating system: Windows 7 Home Premium Edition
Version: 6.1 [7601]
Application architecture: x64
System architecture: x64
Physical processor count: 8
Processor speed: 2.6 GHz
Built-in memory: 12278.9 MB
Real memory available to Lightroom: 12278.9 MB
Real memory used by Lightroom: 1332.3 MB (10.8%)
Virtual memory used by Lightroom: 1365.3 MB
Memory cache size: 724.1 MB
System DPI setting: 96 DPI
Desktop composition enabled: Yes
Displays: 1) 1920x1080

You are going to have to render using lightroom in order to use the latest ACR updates since you can no longer get ACR updates for PS CS4. But when you click on Render using LR, it still should open in CS4 I would think. You might be able to fix this by telling LR that you have another editing program, CS4, and then select it instead of the generic photoshop at the top of the this. But I would not think that you would have to do this.

Can I use Adobe Photoshop CS4 Extended on my brand new iMac? I had PS on my old Mac using the student licensing.

About four years ago, I purchased Adobe Photoshop CS4 Extended while I was in undergrad. I downloaded it to my Mac. Since then, I've purchased a brand new iMac. Can I use this same software? I know it's been four years so the software is very updated, AND my new iMac does NOT have a cd drive. This may all be in vain. I'm just clueless! Thanks!

Emalexander89 you are welcome to install Photoshop CS4 on your new Mac. You can download a fresh copy of the installation files at Download CS6 products.

Adobe Photoshop CS4 English Language Pack Error: Error 2.

I've read another post indicating this error upon install of CS4. Many of the factors described do not fit my scenario, so I thought I'd post this again.
Basically, I have Win XP SP3 all updates applied. Minimal services running. No software firewall. Everything installed just fine from Production Premium CS4 EXCEPT Photoshop. Error shown in subject line of this post is issued by installer.
Photoshop won't boot stating it is missing files from it's folder.
Wazzup?

OK. This error drove me nuts and I have seen a thousand different "solutions" posted on various forums (none of which actually worked), but I think I found the magic bullet for this problem. This appears to be a result of corrupted/missing language pack files. Here's what I did to resolve it once and for all!
You should already have a folder somewhere with the contents/Setup.exe for CS4 Design Premium
Download the trial version of Adobe Photoshop CS4 Extended
Unpack the contents to a folder/directory somewhere on your PC
You will NOT be installing the Photoshop CS4 Extended application - only copying some files.
Copy the "extensions" folder from Photoshop CS4 Extended, that you just downloaded to your CS4 Design Premium folder (there should be an "extensions" folder already there as well)
Select yes if prompted to replace existing files/folders.
Double-click the Setup.exe in your CS4 Design Premium directory and re-start the installation of Photoshop from there.
Problem should be solved.

Adobe Photoshop cs4 freezes at "Preparing to Install..." on Mac OS X 10.6

I am trying to install Adobe Photoshop CS4 for the first time (it's not an upgrade) from the trying versión of adobe.com on Mac OS X 10.6 (all the latest updates are installed). The Mac install is also pretty fresh, although I have installed a few things. The CS4 install starts and I get a "Preparing to Install..." message. But, that's it. It's stuck there indefinitely.
I have disable my antivirus software, tried to use AdobeSupportAdvisor (but it doesn't seem to be able to determine that an install has been attempted), and been working through everything on
http://kb2.adobe.com/cps/407/kb407428.html
to no avail. I get the same behavior no matter what I try.
Any suggestions are very much appreciated.

While I understand you may have valid reasons for using it, I still have to ask, why on earth are you running antivirus on OSX? I know there are a few people here who love trying to convince the rest of the world that there actually is such a thing as a Mac virus, and that the threat is very real that unprotected Macs could be vulnerable, but I've been using OS X since 10.0 (early in 2002) and I've never seen or been affected by a virus on any of seven Macs I've owned.
I've tested McAfee (Virex), Norton, and Trend Micro products for Mac only to find that they are either cumbersome and bothersome to the point that they ruin the user experience of a truly user friendly OS, or they interfered with things I was trying to do or needed to do with other software.
The end result is that I do not use antivirus of any kind on my Mac and to date I've yet to have a single problem because of that choice.
I'd wager a good guess that the root of your problems is some background process of your antivirus trying to san the installer or stop the installation altogether because the installer is newer than a virus database file, which most companies don't make a serious priority of updating for Mac since they know as well as most of us that there aren't any Mac viruses out there just waiting to destroy an OS that isn't Windows.

Adobe photoshop cs4

please help
I have adobe photoshop cs4 and when i enter the disk to install it does nothing . whats the problem - i did have a trial version on it b4 would this have anything to do with it, if so how ca i fix it ?

I installed CS4 as a trial and it says license (or trial) expired on first use. I uninstalled it and re-installed it many times and I had the same problem. I donwnloaded a recover license from Adobe web site but it didn't solve the problem. It seems like I'll need to format my hard drive but I wouldn't like to mess up my OS until I move completely to Win 7. Googling the problem came with some solutions that seem fishy. Any hints on how to fix this and why this happened? I'm planning on recommending the software so my company can purchase it but I would like to try this version at home before recommending it and finding out that CS3 would do just fine. Also, the extended version may be a better option but I would like to try it at least for a week so I can write some justification if there is one.
If you know the solution to the problem, please let me know. Also, your comments on the new features would be appreciated as they can help me on this decision. I don't want to call Adobe because they will probably say they don't support trials.
Thanks,

Adobe Photoshop CS4 11.0.2 update

descargue el adobe photoshop cs4 11.0.2 update y no me permite instalarlo. Como sigo???

Hi Sifato,
Request you to please repost your question in English.
You can also post your question in one of our international forums : Forums Home
On this page, you will have the international forum options list at the bottom.
Hope this helps.

Adobe Photoshop cs4 extended invalid serial number

I just bought adobe photoshop cs4 extended from a large retail computer store.I had the trial version of photoshop cs4 extended.I uninstalled the trial version and installed from dvd.I got a Invalid serial number error.I am sure there was a software configuration problem .The reason ,the disk needs to verfy that you have the original disk,If that happens ,After installation ,Just delete this file C:\Program Files\Common Files\Adobe\Adobe PCD\cache\cache.db This is the location where it installed the serial . After deleteing it will create a new cache.db file and store the serial there that goes with that disk . When you open PS cs4 it will ask to enter serial again.Just enter the serial again that came with box ..I guess this would work also with adobe photoshop cs4

I encountered the same problem with Photoshop CS5 - I had the trial version installed, and now bought the extended version, but it keeps saying the license key is invalid. I did unistall, ran the cleanup tool, but it is still not working. Any help is appreciated.

Deploying Adobe Photoshop CS4 Extended over Network - issue

Hi all,
I'm hoping anyone can help me with this issue that has plagued me for a few weeks! First of all, here's the details I have:
* Adobe Photoshop CS4 Extended - downloaded media from Adobe website
* Creative Suite Deployment Toolkit - again, downloaded from Adobe website
* Installing to Windows XP with SP3
I ran Creative Suite Deployment Toolkit and set it up including our Volume Licensing key and it output some files including the XML files. I double clicked the AdobeUberInstaller.exe file and it got installed without any issue.
However, when I ran it as silent install via our SMS, it always get stuck at Adobe AIR install with the install log from
C:\Program Files\Common Files\Adobe\Installers\Adobe Photoshop CS4 11.0 09-02-2009.log
with this at the end of the log file:
[     320] Wed Sep 02 14:12:09 2009 INFO
Checking bootstrapper progress
[     320] Wed Sep 02 14:12:11 2009 INFO
Checking bootstrapper progress
[     320] Wed Sep 02 14:12:13 2009 INFO
Checking bootstrapper progress
[     320] Wed Sep 02 14:12:15 2009 INFO
Checking bootstrapper progress
[     320] Wed Sep 02 14:12:17 2009 INFO
Checking bootstrapper progress
[     320] Wed Sep 02 14:12:19 2009 INFO
Checking bootstrapper progress
and so on, with no end in sight.
I have left it more than hour. I also have left it all day, the log file is always full of it. I even "told" Creative Suite Deployment Toolkit not to install Adobe AIR and it still tries to install it anyway. I checked the AdobeUberInstaller.xml file and it has <Action>donotinstall</Action> marked for Adobe AIR. So I'm not even sure why it's trying to install it.
This happens on a PC that has Adobe AIR installed. I tried on another PC where it doesn't have Adobe AIR installed and I still get the same thing.
I'm running out of ideas how to get this to work and this is why I'm here to seek further help from you... help?
Has anyone seen this issue before and if so, what was the fix to get it to work?
Many thanks,
Tony Sutton

Hi all,
I received this e-mail from Adobe, so I thought I'd share this with you all for future ref.
Air needs to contact Adobe to get a certificate.   I would recommend not installing this as part of the suite and push out seperately. At any rate, if you AIR remotely, you will need to set the proxy to allow for the certification process. The other option might to create a snapshot of Air with the certificate already in place.
Here is KB article on it   http://kb2.adobe.com/cps/408/kb408168.html
Thanks all.

Adobe Photoshop CS4 installation options

Similar Messages

Maybe you are looking for