Adobe Photoshop CS5 color replacement tool not working well

I am using adobe photoshop  CS5, when I use color replacement tool it replace color with its own choice not mine and I have visited many blogs but no solution
Please contact me at: [ links removed by admin ] I shall be very thankful

  This is picture before color replacement tool and this is after whereas i needed white backgroud and black foreground. I visited many blogs but couldn't do it correctly.

Similar Messages

  • Photoshop CS5 Color Replacement Tool Not Replacing White

    I am trying to remove some sparkling from hair in an image.  I am attempting to use the Color Replacement Tool.  However, I am not having success, and I don't know why.
    The hair is a dark greenish color, which I used the eyedropper to sample as the foreground color.  Although, in practice, it doesn't matter what color I pick.
    My understanding is that you set the color you want as the foreground color.  Then, on the color replacement tool, you set the cross hairs on the color you want to have replaced (in this case, the white specks, since I want t turn the white into green).
    What happens instead is that the hair changes color, but the white specs remain.
    I have tried the different sampling approaches (Continuous, Sampling Once, Swatch), but no effect.  My mode is color, and other modes have made no difference.  Limits are Continuous, and Tolerance has run the gamut from 5% to 90%.
    What the heck am I doing wrong?
    Sample attached.
    Thanks,
    Steve

    In my opinion Image > Adjustments > Relpace Color and Color Replacement Tool are basically worthless for professional work.
    But I wonder if you mix the two up.
    And, if I understand correctly, they are intended to change the Color while leaving Luminance unaffected, so they would not seem ti provide your intended results.

  • Color replacement tool not working

    My name is Sami,
    Im in photoshop and i drew my own pictures and scanned them and put them into photoshop. When i am using the color replacement tool it doesn't replace any color. I just want to make some highlights and darken certain areas but it won't do anything. HELP!

    We can't know. We know nothing about your system, your images, your version of PS. and well, using the color replacement tool is usually the worst imaginable way to tweak colors...
    Mylenium

  • Photoshop CS5.1 Hand Tool Not Working.

    My hand tool quit working. I looked in the forums. I've closed all browsers, restarted, rebooted, and removed the prefs.psp file. Not sure what to do now?

    Thanks but no. It's not the spacebar. The handtool works fine in Illustrator

  • Photoshop CS5.5 type tool not working after OS X 10.7.3 update

    Hi All
    Weird one ...
    The first thing I noticed was that I could not use the type tool to create 'live' text on a layer. With the type tool selected I get the following error message when clicking to begin typing:
    "Could not complete your request because of a programme error."
    I quit Photoshop then attempted to launch the application by opening the file. The application opened but the file wouldn't, giving the same error message.
    I quite Photoshop again and relaunched the application from the Dock. The applicatiuion opens fine but displays the same error message (before I have attempted to open a file).
    With a file open I checked the type palette, where the dafault typeface is shown as Myriad Pro, but the default settings are:
    Type size: 1pt
    Linefeed (leading): 1pt
    Kerning: 1
    Tracking 1
    Type height: 0%
    Type width: 0%
    Baseline shift: 0
    Colour: black
    Language: multiple
    Type quality: none
    Some odd settings there. The type tool bar (at the top of my display) has blank fields. Typing desired values into any of these fields doesn’t resolver the issue.
    I have tried restarting, creating a new file but to no avail. The type tools in Illustrator and InDesign are working as expected, so it would appear to be a Photoshop problem and I’m stumped ... any ideas?
    Thanks in advance
    Paul

    Hi All
    Okay ... I have sorted this out. I deleted the preferences file:
    http://kb2.adobe.com/cps/828/cpsid_82893.htmluser/Library
    tip for accessing the hidden user library (OS X 10.7):
    http://kb2.adobe.com/cps/909/cpsid_90947.html
    Working normally now ... but I wonder what upset the tool ...
    Thanks
    Paul

  • Photoshop CS5 Refine Radius tool not working

    Hi, I'm following along the Classroom in a Book CS5 Photoshop book and when I try to use the Refine Radius tool in the Refine Mask dialog box and try to paint with it to refine the edges of the black hair model, the paint strokes do not hold. The painting works but then the action is basically undone. Followed all the instructions to a T, but saw the same problem when I tried it on another photography yesterday too.
    Any tips as what I'm doing wrong?

    Thanks but no. It's not the spacebar. The handtool works fine in Illustrator

  • I want to download adobe photoshop elements 11 but does not work?

    I want to download adobe photoshop elements 11 but does not work?

    download here,
    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  12 | 11, 10 | 9,8,7
    Lightroom:  5.5 (win), 5.5 (mac) | 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Adobe Bridge CS5 in windows 7 not working?

    Adobe Bridge CS5 in windows 7 not working. I was using bridge perfectly for last 2 years. It stops working since 3 days. I tried to install updates. Showing some error to install.
    Tried to install creative cloud..again some error. Error code : 82
    Could you please advice how I can fix my adobe bridge.

    https://www.youtube.com/watch?v=xDYpTOoV81Q&feature=youtu.be
    please check this video I uploaded..this is what happens when I click adobe bridge.. just blinks and go off. bridge not working on task manager

  • Adobe photoshop elements 12 organizer works, but adobe photoshop elements 12 editor does not work--it thinks it is a trial version

    adobe photoshop elements 12 organizer works, but adobe photoshop elements 12 editor does not work--it thinks it is a trial version.HELP
    If I try to register 4 boxes circle endlessly.Why should I have to register editor separately from organizer?

    jaroFocb'15 wrote:
    This is almost the same as the problem I had. I'm my case the Editor installed but not the Organizer! Adobe chat told me they no longer have chat or any other services for Elements 12. I guess they want people to buy their new Elements 13, but that leaves us in a bad place and doesn't say much for how Adobe cares about their customers After it moves on to their next version. I posted a message like yours over a week ago, and only got one email from an Adobe staff person, asking me to answer a couple of clarifying questions, but he never followed up on my response, so my problem is still unresolved. If you are luckier and are given a solution please let me know what it is -- it might work for me too, and I'd be very grateful!  My email:  [email protected]  
    Good luck.
    Have you checked whether you have folder for PSE Organizer?  It is normally at this location in Windows 7 and Windows 8/8.1:
    <C:\Program Files (x86)\Adobe\Elements 12 Organizer>
    If the folder is there then try double-clicking on the file called:  PhotoshopElementsOrganizer.exe
    If the folder isn't there at all then you need to re-install the package again using your original disks or from download from Adobe website.  <Download Photoshop Elements products | 13, 12, 11, 10>
    Hope this helps.

  • Lightroom 5.6 would not open. I only get a flash picture then I get an error message. See below message: [Window Title] Adobe Photoshop Lightroom 64-bit [Main Instruction] Adobe Photoshop Lightroom 64-bit does not work more [Content] there was a problem m

    Lightroom 5.6 would not open. I only get a flash picture then I get an error message. See below message: [Window Title] Adobe Photoshop Lightroom 64-bit [Main Instruction] Adobe Photoshop Lightroom 64-bit does not work more [Content] there was a problem making the program no longer work properly. The program is closed and there is a notification if a solution is available.

    I may have just solved my own problem. Right after posting this I googled bezel lightroom and found this: Flickr: Discussing The word 'bezel' appears in the taskbar. in Adobe Lightroom
    I changed the setting in the view menu and now everything appears to be working fine. I cannot explain why it stopped working before because I hadn't made any previous changes to the view options.
    Still am curious about the memory usage, though.

  • Redemption code for Adobe photoshop/premiere elements 11 does not work

    redemption code for Adobe photoshop/premiere elements 11 does not work

    I am having the same issue except that my premiere elements code worked great, but the photoshop elements key failed. Ugh.

  • Color change tool not working properly

    I am running Photoshop CS5.
    Now when I try to replace color, these are my steps
    color replacement tool
    mode: color
    sampling: continuous
    limits: find edges
    tolerance: 33%
    anti-alias: selected
    I pick my color that I want to replace. If it is a green, or a blue, it will replace the color, but it replace with a neon color instead of the color that i pick.
    If i use a white or a black, it will not replace the color at all.
    Any ideas how to fix the problem?
    Thanks in advance

    Any ideas how to fix the problem?
    Plain and simple: Learn how to work with selections and then use adjustments or e.g. the paint bucket tool. You are fundamentally misunderstanding how the tool works. All of what you see is as it should be - based on your settings it retains luminance and just replace the color info which explains why black and white don't respond (as there is no color) and how substituting a color while retaining the luminance would yield an unexpected visual result. Again, your approach is wrong, not the tool.
    Mylenium

  • CS5 Refine Edges tool not working how its suppose to

    Hello everyone - well I like the title says refine edges tool not working right -
    I open an image in photoshop - make a quick selection of a part of the image and then go into refine edges - Click on smart radious and when I use the brush to get a better selection that part becomes transparent - I tried seaching everywhere for an answer but noone seems to know
    Thank you

    Could you please post a screenshot with the pertinent Panels visible?
    The videos you might have seen might simply be using images that lend themselves to the task better than your image.

  • Color Replacement does not work

    I'm tyring to work through the tutorials. I've done the color replacement instructions over and over again just as the instructions seem to say which isn't very good, and nothing happens. Can anyone give a step by step instruction that works. The ones in the iPad tutorial for the MAC version is not working. I am working with version 14.XX on a Macbook Pro totally up to date.
    I watched a youtube video but is for an older version. Not much help as tools have been changed.

    Brainsprain wrote:
    I got it to work using a method from YouTube not from Adobe.
    So you didn't use Photoshop at all then?  That's a cool trick.

  • Colour replacement tool not working

    I have a jpeg file loaded into Photoshop CS6. This is a black logo on a white background. The colour replacement tool has no effect on this (I want to change the black to another colour)
    I have read somewhere that the tool doesnt work with black and white? is that correct and if so, how do i get the colour changed
    Thanks
    Chris Anderson

    Hi Cjacs,
    You may try using blending modes to achieve your desired result. Starting with a black and white logo:
    1) Create a new fill layer by going to Layer > New Fill Layer > Solid Color.
    2) At the first dialog box, click OK. Then choose the color you want the artwork to be.
    3) You logo artwork will then be hidden, but don't worry! We'll using blending modes to change this.
    4) In the Layers Panel, look for the area where it says "Normal." This is where you change the blend mode. Open this dropdown menu and select Screen.
    5) Your artwork will then be changed to the color you chose before.
    I hope this was helpful! Please don't hesitate to ask more questions if this did not solve your issue.

Maybe you are looking for