Adobe Photoshop CS6: Photoshop.exe - System Error  The program can't start because ONCoreFoundation7

I get this error after updating ONONE premium edition 8 to 8.1
been to their site no luck in resoving error.
I click ok to error PS cs6 still launches, just annoying.
ONCoreFoundation7.dll  is part of ONONE 7

after updating ONONE premium edition 8 to 8.1
does not say windows 8 or 8.1
again, not perfect Suite 7, updating ONONE premium edition 8 to 8.1
does not say 7
here's your more info
I'm trying to fix an error message not covered in the knowledge base.
I open PS CS6 (after updating to PE 8.1) and I get an error message...
Adobe Photoshop CS6: Photoshop.exe - System Error
The program can't start because ONCoreFoundation7.dll is missing
from your computer. Try reinstalling the program to fix this problem
I followed instructions in this article, but still get the error, it doesn't stop PS from launching after clicking ok.
Does anyone know the fix? I even tried reinstalling PE 8.1.
PE=Premium Edition

Similar Messages

  • ITunes.exe - System Error - The program can't start because MSVCR80.dll is missing from your computer.

    The Program can't start because MSVCR80.dll is missing from your computer.

    Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
    http://www.apple.com/itunes/download/
    (The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
    Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
    If you still have the same error messages cropping up, then try the procedures from the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • Itunes.exe-System Error The program can't start because MSVCR80.DLL is missing from your computer. Try reinstalling the program to fix this problem.

    I've reinstalled it 3 times and i keep getting that message, is anyone else having this problem?

    This issue started yesterday when Itunes updated to latest version.  I have uninstalled in the order described 3 times.  during re-installation there is a new error that the mobile services failed to start.  I don't know if that has anything to do because itunes finished the installation and provides a message that it installed correctly.
    When I try to launch itunes that is when I get the message.
    Everything worked fine until I allowed itunes to update yesterday.  there must be a bug in what Apple released

  • Hi, I updated my version of iTunes and now get the error "The program can't start because MSVCR80.dll is missing from your computer".

    Hi, I hope some one can help as I updated my version of iTunes and now get the error "The program can't start because MSVCR80.dll is missing from your computer". I understand that I need to delete and reinstall iTunes but all of my music has been uploaded from CD's and I'd like to know if these are safe if I delete iTunes of if they too will be deleted. I have over 1300 songs so this is a big question for me.  Many thanks.

    Under normal circumstances, an uninstall/reinstall doesn't touch your content. (That being said, it's still always a good idea to maintain a current backup at all times in case of disasters of any sort.)
    First try updating to iTunes 11.1.5.5, using an installer downloaded from the Apple website:
    http://www.apple.com/itunes/download/
    If you still get the errors after that, try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • Error: The program can't start because MSVCR100.dll is missing...

    I am trying to install SQL Developer on my Windows-64 laptop. I downloaded the Windows-64 version of SQL Developer from oracle.com, which only comes WITHOUT an included JDK. I installed a JDK separately, but now when I try to launch SQL Developer, I get an error:
    The program can't start because MSVCR100.dll is missing from your computer. Try reinstalling the program to fix this problem.
    I went to the Microsoft web site, and a forum indicated I needed to install Microsoft Visual C++ 2010 Redistributable Package (x86) to get the dll. I did this, but I still get the same error.
    Does anyone know how to fix this?

    Hi,
    Are you using Java 7? SQL Developer 3.x support only goes through Java 6 (jdk1.6.0_27 is the latest to date). When playing with SQL Developer / Java 7 on WinXP, I noticed that I had to copy MSVCR100.dll from jdk.1.7.0 to the same directory as the sqldeveloper.conf file. Here is the link discussing this:
    Re: SQL Developer 3.0  and Java SE 7?
    But I recommend just using Java 6.
    Regards,
    Gary Graham
    SQL Developer Team

  • TS5376 I have followed the instructions re these 2 errors "The program can't start because MSVCR80.dll is missing from your computer" but still not able to run iTunes. Anyone have a suggestion?

    I have followed the Apple Support instructions re these 2 errors "The program can't start because MSVCR80.dll is missing from your computer" and 'Error 7' but still not able to run iTunes. Anyone have a suggestion?

    Try completely removing and reinstalling iTunes and all related components; you may need to do this multiple times. It won't normally affect the iTunes library, but that should be backed up anyway.
    (99328)

  • HT1923 I am getting this error       " The program can't start because MSVCR80.dll is missing from your computer. try reinstalling the program to fixthe problem. "  I have reinstall 3 times still nothing?   HELP

    I am getting this error       " The program can't start because MSVCR80.dll is missing from your computer. try reinstalling the program to fixthe problem. "  I have reinstall 3 times still nothing?   HELP

    Read the user tip: https://discussions.apple.com/docs/DOC-6562 for the most thorough explanation of fixing this problem.

  • Opening iTunes shows an error- The program can't start because AVFoundationCF.dll is missing from your computer. Try reinstalling the program to fix this problem. ; Even after reinstalling iTunes doesn't start!

    When I start the iTunes program it comes up with this.. pls help!!
    "The program can't start because AVFoundationCF.dll is missing from your computer. Try reinstalling the program to fix this problem."
    Even after reinstalling iTunes doesn't start!

    Repair your Apple Application Support.
    Control Panel > Programs n Features (Win7) or Add n Remove Programs(XP) > highlight AAS, click CHANGE then REPAIR.

  • My Itunes won't open. When I click on it I get error message:  The program can't start because MSVCR80.dll is missing from your computer.

    The first error message is: itunes.exe-System Error:  the program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix the problem.
    The second error message says: itunes:  itunes was not installed correctly.  Please reinstall itunes Error 7 (Windows error 126)
    I have reinstalled several times and the same thing keeps happening.  Does anyone know what to do?

    Ralph, both links you've posted point to the same place!
    Ah, I see the second one is meant to lead to Tony's tip: https://discussions.apple.com/docs/DOC-6571
    That one applies for certain launch errors that can occur when iTunes has otherwise installed successfully. I've addressed the same issue in the first box of my tip.
    What would be interesting to know is if Aswim does indeed have QTMovieWin.dll in their Program Files\iTunes folder, and if removing it allows iTunes to launch? It would seem that different error messages may be thrown up by different versions of the file on different versions of the OS. Perhaps many more people have been doing a complete rebuild than needed to.
    tt2

  • TS5376 For "The program can't start because MSVCR80.dll is missing from your computer", I followed the steps and there is no C:\Program Files\iTunes and look for .dll files..Also, after the update, I no longer show my disk drive when I load a CD.

    After downloading the new Itunes update, my compter now shows error: "The program can't start because MSVCR80.dll is missing from your computer". I follwed the Apple fix / steps but it did not correct it. Also, after the update my disk drive is not recognized on my computer. If I load a CD, I cannot even access it.

    See also Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes (similar to the advice above) and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies. E.g. TS2308: iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • Acrord32.exe system error the program cant start because msvcp100.dll

    Hello Adobe Community,
    Im having problems with an XP Pro machine that is joined to a domain where i keep getting the following error message : " acrord32.exe system error the program cant start because msvcp100.dll"
    I can temporarily solve this by uninstalling Adobe Reader and then reinstalling it. But the next day the computer restarts the same error comes up again. In other forum there was a solution to install Microsoft Visual C++. I installed it but the same problem happen again the next day. The Adobe Reader version I have installed its XI (11.0.03). If you guys could help me with this issue that would be great

    It's not C++ you need to install, but the Microsoft Visual C++ 2010 Redistributable package.  But I have no idea why this happens again the next day.

  • All of a sudden I'm getting a 'itunes.exe - system error  It says the program can't start because MSVCR80.dll is missing from your computer.  Try reinstalling the program to fix this problem.  I have tried to reinstall and still can't open itunes.  help!

    all of a sudden I'm getting a 'itunes.exe - system error  It says the program can't start because MSVCR80.dll is missing from your computer.  Try reinstalling the program to fix this problem.  I have tried to reinstall and still can't open itunes.  help!

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • Hpqdirec.exe – System error. The program can't start because ATL90.DLL is missing from your compute

    Hello,
    The following has only transpired recently. It concerns Windows 7 and my C6380 All-In-One.
    It appears to be a registry issue. I am experienced and have tried even more than that listed below.
    On launching the "HP Solution Centre", I receive the following error message:-
    “Hpqdirec.exe – System error.  
    The program can’t start because ATL90.DLL is missing from your computer. Try reinstalling the program to fix this problem."
    Are you able to advise on how I can resolve this issue. Clearly, I want to avoid a complete clean install of my PC.
     What I have tried
    - Complete Install, Reboot, Install of the HP Software
    - Restore points
    - Running virus scanners
    - Windows "Start-up Repair"
    , - Running RegZooka

    I can think of a couple of possibilities here.
    One, if this was an upgrade from XP or Vista, then it is possible that the file is just not there in the operating system. Or if some other uninstallation removed it unknowingly. Not likely but possible.
    More likely, some sort of security software (firewall/antivirus/malware) blocked part of the installation. This could result in missing HP items and/or missing linkage to operating system necessities. You might try reinstalling with the security software disabled or off completely. At the minimum, with options to allow the HP installation full access during the install.
    Hope that helps.
    007OHMSS
    I was a support engineer for HP.
    If the advice resolved the situation, please mark it as a solution. Thank you.

  • I ran an iTunes update.  It failed with the message  System Error.  The program can't start because MSVCR80.DLL is missing from your computer.  Try reinstalling the program to fix this problem.   I tried reinstalling but get the same message.

    I ran an iTunes update.  It failed with the message  "System Error.  The program can't start because MSVCR80.DLL is missing from your computer.  Try reinstalling the program to fix this problem."   I tried reinstalling but get the same message.  I looked in my Recycle Bin for that file name but there is none there.  Is this a new file that iTunes wants?

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99683)

  • System error message  on iTunes says the program can't start because  MSVCR80.dll is missing from your computer.

    On iTunes there Ida. System error stating  that the program can't start because MSVCR80.dll is missing from my computer.

    I'm assuming you're running on windows 7? Tons of people have been having this issue.
    This should fix it. Good luck:)
    iTunes for Windows: Missing MSVCR80.dll

Maybe you are looking for

  • Error while trying to create tree using same EMP how to tutorial

    Hi, I get the following error while trying to create a sample tree similar to the one posted in the how-tos web page. The final query that creates the tree is also as follows The Current Query shown in my apex window and the one on the howtos tutoria

  • IPhone 4s reboots many times when trying to sync with iTunes

    iPhone 4s reboots many times when trying to sync with iTunes. Since IOS 8, my iPhone 4s reboots many times when trying to sync with iTunes on my Mac. It will start running the backup and reboot, it will reboot many times when updating packages. It ca

  • Object Modeling Tools

    I know that there have been many discussions before on this list about modeling tools, but here goes one more... We are in the process of evaluating Modeling Tools that work well with Forte. We would also like to have a tool that integrates with a Da

  • Skpe and online videos

    hi, skype and online videos are not working completely in my nokia asha206. can anyone tell me about me about this problem?. i shall be vry thnkfl 2 u. ok bye...

  • Logic 6.4.3 Crashed - NEED HELP - Can't Open File!!!!!!

    My Logic crashed after saving a song. When I saved my track, Logic crashed and a box appeared saying ("The application logic pro quit unexpectedly"). The backups won't open and the same error box appears, other songs project and logic open just fine.