Adobe Photoshop Elements 10 - Setup

I have been trying to get past an installation error I am getting trying to install Adobe Photoshop Elements 10. I have tried to redownload and install multiple times. I tried going to the registry and and editing permissions, but not sure if it applied correctly.
I am getting Error 1402. Could not open key:
UNKNOWN/Components/13FD83440E8F2304284FD0F33E956FEF\9FA945EEAAF84854382BC1FCBD91CFF. Verify that you have sufficient access to that key, or contact your support personnel.

There have been made some changes in your registry setting that have caused permisson denied on registry. So can you try by login as Administrator and try to reinstall.
If this doesn't work go through this link . This is a generic help , "Beware changing in registry can cause application level or other system level issue".
http://www.okino.com/conv/changing_windows_registry_permissions.htm

Similar Messages

Adobe photoshop elements 6. Error setup 1402

I cannot reinstall Adobe photoshop Elements 6 (CD) in my system OS Windows 7. The setup displays the following message;
error 1402 Could not open key UNKNOW\component\DA42BC*************************\*************834F
verify that you have suficient acces to that key, or contact you support personnel.
Appreciate your help.

Read through this help guide for creative suite which may help:
http://helpx.adobe.com/creative-suite/kb/error-1401-1402-1404-or.html

Have a new computer and will I my adobe photoshop elements 12 downloading and installing, do you have the setup for me.

I have a new computer and will I my adobe photoshop elements 12 downloading and installing, do you have the setup for me
I see only photoshop elements 13
Thanks

Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Adobe Photoshop Elements 10 setup wont open

Hi, i just got a new bamboo tablet for xmas and tried downloading the Attached Adobe Photoshop Elements 10 that you get with it. However after sitting around for ten or so minutes to wait for the installer to download, it won't open!? Can anyone help?

I just got my computer in August, £1600 of good tech. Runs on Windows 7 but I dont think itll be a problem with my hardware, or was that not what you were asking? :s lol

Installing Purchased Adobe Photoshop Elements 12 Impossible with Present Mac Setup. SuperDrive Does'nt Work on Mac

Just bought a copy of Adobe Photoshop Elements 12 but the SuperDrive on my Mac does’nt work. It has’nt for a few years. Have another USB SuperDrive I was hoping would work but my Mac won’t recognize it. Is there any way of downloading a trial version and entering there serial number from the box into the downloaded version

Yeah, click the Try link next to PSE12:
http://www.adobe.com/downloads.html

Installing Adobe Photoshop Elements 1.0.1 on Windows 8

I can't install Adobe Photoshop Elements 1.0.1 with Windows 8. The setup program shows the message "You need install Internet Explorer 4.0 or higher". What can I do?

Hi, I have the same problems, I can not reinstall my Photoshop elements1.0.1. on Windows 7. Same error : You need install Internet Explorer 4.0 or higher.
How should I use compatibity mode ? What should I do when I insert my CD on ?
Thank you

Can't install Adobe Photoshop elements 4 anymore. Why?

Greetings!
I tried to open a post with the support team, but they said that the support for my product was no longer available.
I'll copy the post I posted to the support:
After not using Adobe photoshop elements 4 for a year, i decided to install it again on my new harddrive as my last one crashed. When I
try to install from the CD an error message shows up telling "This installation package could not be opened. Contact the application
vendor to verify that this is a valid Windows installage package". I've tried to install the CD on several computers after that, but I just get the same error message every single time. The CD is not damaged/scratched in any way as it has only been stored on the box it came with.
I am using a legal version of Windows XP and I don't have pirated software that should effect the installation.
Operating System: Windows XP Home
Browser: Opera
Has it ever worked? If so, what's changed? (provide comments in description field): Yes
Same results with different file?: Not Applicable
Same results with different computer?: Yes
Recent System Hardware or Software change?: No
I'm considering just downloading pirated software instead. I bet I can have less problems and better support if I download it pirated, instead of buying it (AGAIN) for a 100$. It's ridiculous if u ask me.

If you are lucky...
You could try coping the CD contents into your OS clipboard and paste it onto your destop. Run the setup.exe from this desktop folder. It's worth a try although I'm doubtful it's the answer. (Opera shouldn't be a factor...use it myself.)
Could be XP SP2 related maybe have a look at this thread:
http://techrepublic.com.com/5208-6230-0.html?forumID=101&threadID=250182&start=0
or perhaps the windows installer package isn't up to date...see this:
http://www.microsoft.com/downloads/details.aspx?FamilyID=889482FC-5F56-4A38-B838-DE776FD41 38C&displaylang=en#Requirements
and this goes with the above link...it's to do with Office but note the cause of the error:
http://support.microsoft.com/kb/828380

Aperture 3 and Adobe Photoshop Elements 10 problems.

I have installed Adobe Photoshop Elements 10, which I have setup as plugin for Aperture 3. In Aperture preferences the photos are exported as 8 bit TIFF 300 DPI, no profile and automatically stack new versions selected in general.
I right click on selected image (version) in Aperture and select edit with Elements, this create another version of the same photo in Aperture but increasing size from say 5MB to around 40MB. The Elements programme opens in Elements editor but the selected image is not there, I can only drag it in from Aperture. I then edit the image, then click save, it open a box save as and to a wierd folder like Uwvo2vg etc. I click save, get message saying it will overwrite file of same name, click save using a unique name. When I go back to Aperture, the edited file is not there and when I search for the unique name, nothing comes up.

I had somewhat similar problems running Elements 10 as external editor, but under 10.6.8. The simplest fix is to send .psd's instead of .tiff. You can change that in preferences.
If you must use .tiff (I do, becaues PTLens doesn't like psd) you have to change the file extension to .tiff in the save dialog. Elements saves as .tif and Aperture saves as .tiff. Notice the number of 'f' at end of extension.
Here's what was happening to me, which is a little different:
• when you send to external editor, Aperture saves a .tiff and opens it in in Elements
• you do your work and close the file
• Elements saves as .tif, and so doesn't overwrite the Aperture tiff.
• Aperture doesn't know the .tif exists so it shows you the un-edited .tiff that if made at the beginning
I get around this at the save dialog in Elements. Basically Elements goes into a Save As kind of dialog, so if I add the extra 'f' at the end, Elements asks if I want to over-write the existing file, and when I say yes the changes show in Aperture.
If you open Elements and go to 'Recent Files' (or something like that), you can see the .tif and .tiff files together. If you delete the .tiff and add the extra 'f' to the Elements .tif, the changes will show in Aperture.
What you shouldn't be doing is changing the name of the file in Elements. For the edits to show in Aperture you need to save the file with the same name and change the extension to .tiff. The file that Elements saves must have exactly the same name as the one Aperture made, because that's the file that Aperture knows about.
If you do a library database repair, Aperture will find these .tifs and add them to the library, but they won't be where they should be. The show up in a recovered file folder at the bottom.
Note that Elements 8 didn't have this kind of trouble. And note that I'm not running Lion, so some of the behaviors I describe may be different that what Lion users see.

Adobe Photoshop Elements 11 Folders

I recently purchased and downloaded Adobe Photoshop Elements 11 and I notice that 2 folders were created in My Documents, as follows:
Folder No. 1 - Adobe Photoshop Elements 11 - 1.87GB, 163 files, 52 Folders
Folder No. 2 - Photoshop Elements 11 - 1.16GB, 151 files, 50 Folders
Is this setup correct and / or necessary? I notice that many of the files in each of the folders are similarly named and therefore wondering if something went wrong during the download / setup and that the process was duplicated?
What is the process in the event that the software needs to be downloaded again, say after doing a Windows re-installation? Can I copy the software to CD or DVD for future installation?
Any assistance will be greatly appreciated.

One is the base installer, the otehr the content like image frames, photobook templates etc.. Backups are always advisable. USB sticks are cheap and yopu could ebven bury one under your house for posterity...
Mylenium

Adobe Photoshop Elements 11

I recently purchased and downloaded Adobe Photoshop Elements 11 and I notice that 2 folders were created in My Documents, as follows:
Folder No. 1 - Adobe Photoshop Elements 11 - 1.87GB, 163 files, 52 Folders
Folder No. 2 - Photoshop Elements 11 - 1.16GB, 151 files, 50 Folders
Is this setup correct and / or necessary? I notice that many of the files in each of the folders are similarly named and therefore wondering if something went wrong during the download / setup and that the process was duplicated?
What is the process in the event that the software needs to be downloaded again, say after doing a Windows re-installation? Can I copy the software to CD or DVD for future installation?
Any assistance will be greatly appreciated.

If you saved the download, you can burn the file to CD or DVD and then copy the file to the computer and open the installation file when you need to install it.

Download replacement installer for Adobe Photoshop Elements 11

How can I download the replacement installer for Adobe Photoshop Elements 11. I need to reinstall it on a new PC. I do have my serial number.

You put both the .7z and the .exe in the same folder. Run the .exe (double-click it) and it will automatically unzip the file and start the setup program for you.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

Installion problem with Adobe Photoshop Elements 10

The setup first wants to de-install, instead of installing Adobe Photoshop Elements 10. I confirm to de-install, but then I get the message : Specified path is empty and then no installation. A prior Adobe photoshop emelents version was deleted manually from the computer and the deactivation did not happen.
What needs to be done to run the installation?

http://helpx.adobe.com/photoshop-elements/kb/error-2343-specified-path-empty.html

Adobe Photoshop Elements 6.0 installation issue

Greetings,
when running a silent installation of Adobe Photoshop elements 6.0 the user receives this error prompt during installation:
"System Restore is turned off. If you continue Setup, you will be unable to use System Restore to restore the version of Windows Media Player that was included with the Windows operating system that your computer is running. It is recommended that you click Cancel, turn on System Restore, and then upgrade to Windows Media Player 10. For more information about System Restore, see Help and Support. Do you want to continue?"
Adobe KB:
http://kb.adobe.com/selfservice/viewContent.do?externalId=332107
However like in most deployment situations it is not an option to enable System Restore as this is a function that shall be deactivated on client machines.
Does anyone know what the photoshop installation does to invoke this and how it can be bypassed?
Why does Adobe invoke the Windows Media Format 9.5 installer if this is the case?
We have deployed dozens of apps on the to the same client machines without seeing this happen before, including other Adobe products (CS2, CS3 etc).
Cheers

Ask on the Elements Forum.
http://www.adobeforums.com/webx/.eeb4f8b/

Do I need to delete trial version of Adobe Photoshop Elements 12 before installing paid version?

Hi, I bought Adobe Photoshop Elements 12. I already have trial version of Adobe on my computer. Should I delete the trial version before downloading paid version?

See: http://www.adobe.com/products/photoshop-elements/faq.html#trial-information
If you already have a trial version of Photoshop Elements 12 or Adobe Premiere Elements 12 installed on your computer, you can continue using the software without interruption by purchasing the product for unrestricted use.
Simply select Download from the Delivery Method pull-down menu on the Adobe Store page.
When your purchase is complete, you’ll receive a product serial number via email that allows you to easily convert your trial version without reinstalling the software.
Enter the serial number in the Software Setup screen (shown below) within your trial product and follow the prompts to complete the process.

Adobe Photoshop Elements 9 will not install - rollback action issue?

Im having problems installing Adobe Photoshop Elements 9.
The problem is right at the end of installation, it says status is registering and then immediately does an action rollback.
The message "The wizard was interrupted before Adobe Photoshop Elements 9 could be completely installed. Your system has not been modified. To complete installation at another time, please run setup again."
I am beyond frustrated as I have tried installing even as an administrator and Im assuming there is nothing wrong with the CD just my computer being a complete pain.
If anyone can offer some help that would be greatly appreciated.
Holly.

Hi Holly
I have the same problem with the rolling back installation. Could you tell me what Ankush advised you to do to solve it.
Sorry to bother you but I seem to be hitting a brick wall elsewhere.
Thank you in anticipation.
Davemanton

Adobe Photoshop Elements 10 - Setup

Similar Messages

Maybe you are looking for