Adobe Photoshop Elements 11 People Recongnition

So maybe I'm using this wrong or maybe this is just how it works. I have about 5,000 photos, I imported them all into Photoshop Elements 11. On the main screen, I click Add People and it starts going through all my photos, but I seem to be getting a lot of duplicate faces/photos showing up asking me is this X Y or Z. Is it not learning from the previous pictures?
Even worse when I get tired and quit and then start up the next day it seems to go through a lot of the same photos I went through the previous day.
Any ideas?

Hi Zach.
Sorry to say but Elements 12 came out several months before your camera. Adobe stops updating camera raw files for old software editions so that people have to buy new versions of the software when they get a new camera. It happened to me with LR3 when I got a new camera.
There are works rounds but they are a lot of extra steps and I think you would be converting the files to Some format other than RAW (tiff?) and which I am not sure will perform the same.
I think you just need to get a newer version of Elements.
Scott
Canon 6D, Canon T3i, EF 70-200mm L f/2.8 IS mk2; EF 24-105 f/4 L; EF-S 17-55mm f/2.8 IS; EF 85mm f/1.8; Sigma 35mm f/1.4 "Art"; EF 1.4x extender mk. 3; 3x Phottix Mitros+ speedlites
Why do so many people say "fer-tographer"? Do they take "fertographs"?

Similar Messages

Start up Adobe Photoshop Elements 11 - why does it stall at "restoring people recognition data" 42%

I just downloaded and installed Adobe Photoshop Elements 11 & Adobe Premiere Elements 11 (Windows,English). When it starts up it stalls at the dialogue box "restoring people recognition data" 42%.
I have to close the program then the whole thing happens again.
Pretty frustrating for $150............... to upgrade from Elements 8

This seens to be a problem of Media Analysis which generally arises if there are too many/too large assets in your catalog.
Just try the following steps:-
1. Go to Edit->Preferences->Media Analysis
2 Go to People Recognition options
3. Uncheck the "Analyse Photo for People recognition".
4. Press "OK"

How can I repair organizer in adobe photoshop elements 6.0?

I ran the optimizer in Norton and after that I couldn't get to the organizer in adobe photoshop elements 6.. When I try to reinstall the program it says to "insert disc 1". (I am sure you know because lots of people with adobe have this same problem) There is only on CD installation disc named Adobe Photoshop Elements 6. Like a dope I went to the welcome page and clicked it to open with the organizer (which is broken). So now it sure won't open. Before I got the message that it had to close and was so sorry!!
Now I would like to know if I can uninstall 6 and if I do will it come back exactly as it left or will it be repaired and would my slideshow still be there? I've only spent a year making it and it was just about ready to make a DVD.
Would appreciate any help.

Thank you, thank you, thank you!!!!!
I just uninstalled and re-installed as you suggested. As far as I can tell everything is there. I got so happy with the uninstall & re-install that I did the same for the Adobe Premiere Elements. As I said I have been working on family pictures slideshow (family pics that I only have one set of and want to give to 4 children) for almost a year. I have put classical music to it (because that is what I like). I have it ready to send to Premiere Elements to make a DVD.
You have saved me many hours of redoing. Thanks again.

Unable to download and activate Adobe Photoshop Elements 6 for Mac.

My old mac is being replaced with a new mac and unfortunately, it seems like I will have to repurchase the programs I was using.
I have a disc for Adobe Photoshop Elements 2.0, and purchased an upgrade years ago for Elements 6.0. The download for the version 6.0 is no longer available. I contacted support and they informed me that my only option was to purchase an upgrade.
It is very frustrating to me that I cannot continue to use the programs I was using on my old computer. Any suggestions?

No, sorry. There was an Australian site that had the PSE 6 trial for a while, but that wouldn't help you either, since back then you couldn't enter a serial number into the trial version. If you didn't save your original installation media, I'm afraid you're stuck. Neither Adobe nor ProDesign make PSE 6 available as a download, probably since it would be more trouble for them than it's worth, since hardly anyone bought downloads back then and serial numbers from the disc version won't work in a download for PSE 6 and vice versa, so they'd have dozens of people complaining that there was something wrong.

Adobe photoshop elements 11 won't read my canon T5 raw CR2 files.

adobe photoshop elements 11 won't read my canon T5 raw CR2 files.
why?
need help!
Solved!
Go to Solution.

Hi Zach.
Sorry to say but Elements 12 came out several months before your camera. Adobe stops updating camera raw files for old software editions so that people have to buy new versions of the software when they get a new camera. It happened to me with LR3 when I got a new camera.
There are works rounds but they are a lot of extra steps and I think you would be converting the files to Some format other than RAW (tiff?) and which I am not sure will perform the same.
I think you just need to get a newer version of Elements.
Scott
Canon 6D, Canon T3i, EF 70-200mm L f/2.8 IS mk2; EF 24-105 f/4 L; EF-S 17-55mm f/2.8 IS; EF 85mm f/1.8; Sigma 35mm f/1.4 "Art"; EF 1.4x extender mk. 3; 3x Phottix Mitros+ speedlites
Why do so many people say "fer-tographer"? Do they take "fertographs"?

Hi i am having trouble with adobe photoshop elements 10 it will not let me singh in

Hi all
I hope some one can help me i was on the phone with Adobe for a 1/2 hr and in the end they wanted money to fix a problem they had and no its my problem
I try to singh on to my acc and it comes up not avalable try again later then i try to add people to my address book so i can sent them pictures and it ask me to singh in and then it freezes my whole computa can some one help i dont have the money to pay adobe i have been out of work for 7 years i am 60 and it does not look like work will come again for me the way things are well take care and have a good day and God Bless.
Rich

when I click on my Photoshop at the beginning the welcome comes up and I do not Singh I click organize there are only two thing you can click on one organize and edit.
That is the welcome screen. You don't want to use it because it will always try to contact photoshop.com.
You are using windows, I'm guessing? Then you want to go into the program files. If you have a 64 bit version of windows it will be program files(x86) instead. Go to C:\Program Files\Adobe\Elements 10 Organizer to find the organizer .exe file (it will be called application instead of .exe in windows 7 or 8). The editor will be in C:\Program Files\Adobe\Photoshop Elements 10.

Adobe Photoshop Elements 4 removes three drives.

Computer - AMD Athlon[tm]XP 2400+; 2.00 GHz, 1.00 GB of Ram.
System - Microsoft Windows; XP Home Edition; Version 2002; SP2.
80GB hard disc, 60GB free space.
Printer HP laserJet 1010
Q1. My newly purchased Adobe Photoshop Elements 4.0 has removed three drives from My Computer. D:[CD drive]; E:[CD-RW drive], and F:[DVD drive].
When I removed the programme the drives were back. I installed again and the drives disappeared. I need the drives and I want to keep Photoshop Elements 4.0.
Is there a patch or an update that will stop this from happening? Any ideas or suggestions ?
Q2. If this problem cannot be resolved and I download a trial version of Adobe Photoshop Elements 4.0 from the internet, can I use this new product's license number to validate the trial version?
Best wishes, Brian Gargate, Co Durham, UK

May I reply here to both of the kind people who have responded to my appeal?
To Barbara. Thank you. It appears that I need someone who knows how to 'fiddle' with the registry. I lack the skill so I shall ask a friend who built this computer.
To Brian. Thank you. Yes, I do have those drives. D: for installing programmes, E: for my Nero Burning Rom [I do not use Nero any more because I have an external hard drive for backups but it is handy for copying], and E: a DVD drive. I could live without E: and F: and if that would solve the problem I would happily agree to them being removed. Right now, I am left wih only one drive, A: the floppy drive. No doubt you will have had a look at Barbara's link. It may be the answer. I'm hopeful.
Again, Many thanks to both of you. I will keep you informed.
Brian Gargate. UK

Is anyone else having issues with Adobe Photoshop Elements 12 since upgrading to Yosemite?

this is a common issue, greatly discussed on the Adobe forums. I was hoping that someone in the Apple community might have some information on this. Basically, since updating my macbook pro to Yosemite, Adobe Photoshop Elements 11 and 12 do not work - they freeze or several tools do not work. someone suggested a workaround - to use a mouse instead of the trackpad. Contact with Adobe has resulted in nothing - they will not own the problem. Several people have contacted Apple tech support - they will also not own the problem. Anyone have any solutions or suggestions. Adobe's answer was to purchase their new version of PSE!!

Looking at the Yosemite forum, it is obvious that this is a very common issue. You might want to post in that forum for help and advice.
OS X Yosemite

RAW and adobe photoshop elements 12

I bought a sony alpha 77II and can not open in adobe photoshop elements 12. Image data converter not ok because to much colour pre-defined.

Super !! Thanks a lot for the info, yes it works with 8.5 !!!!
Van: R_Kelly
Verzonden: donderdag 1 januari 2015 20:37
Aan: thierry ferfers
Onderwerp: RAW and adobe photoshop elements 12
RAW and adobe photoshop elements 12
created by R_Kelly <https://forums.adobe.com/people/R_Kelly> in Photoshop Elements - View the full discussion <https://forums.adobe.com/message/7057869#7057869>

Background Task on Adobe Photoshop Elements and Adobe Premiere Elements Organizer "hangs"

I recently upgraded my software from Elements 10 to Elements 12 and had a bit of trouble. Apparently both 10 and 12 have a way of launching an executable in the background which tends to get "stuck" on my system. I believe the problem may be related to the network configuration and software mix I live with, but I need to confirm my suspecions and find a way to control the problem. Here is what I know... I have always experienced a lot of problems using Elements with my NAS device which is a 1TB usb 2.0 connected disk system attached to my Linksys E3000 Router. When I got the router, the BIOS software did not correctly support NTFS file systems, but subsequent updates eventually made this possible if you formatted the removable drive on a system in NTFS, you could then hang it on the router and "see" the contents, serve them via Windows Media Player, or iTunes, etc., etc. from a computer atteched to the network, or via wirless directly off the router. I archived all my photos out on this file system and have successfully indexed it for use with Adobe Photoshop Elements and Adobe Premiere Elements Organizer, but... When I went to install Elements 12 software I tried to install it without first removing Elements 10, and on a system which had run Elements 10 since the last full reoboot. During the install of 12 under "shared services install" the installation process "Hung" on a background task with a name like "AdobeElementsAnalyzer.exe" which only shows up in Windows 7 task manager as a running process, not as a full program, but because the file was locked by the system, the install hung. I eventually figured out that I needed to start the install of Elements 12 software immediately after having rebooted so that this program was not present in the background, and succeeded in completing an install of Elements 12 on my Windows 7 X64 system. This system required a "special" software download for Premiere Elements, but not for Photoshop Elements which is only apparently avaliable under 32bit emulation mode. I finally got the "shared components" portion of the X64 Premiere Elements to complete an install, and then set about verifying the onversion/upgrade of the indexes to my photos and video stored out on the NAS. The same rogue task which prevented me from doing the install showed up agian, taking all the system resources away from my dual processor Intel chip and refusing to let go. I was forced to terminate it from the task manager. I strongly suspect that my "issues" are in part due to the extrordinary network latency imposed by the drive connection I'm using to index my photos and videos, and I'm looking for a better approach to using the editors against my master catalog of files, as well as figruing out just what I need to do to insure that all the files I have stored on the drive are accessible by the organizer when I need to pull a copy to work on.
A complication is that I have two "legacy" Windows XP systems on my network, a reasonably fast Windows Vista Business desktop, and the Windows 7 X64 processor system which is the most powerful system I have. The Windows file security enhancements to NTFS changed from XP, to Vista, to Windows 7, so files which get saved to the NAS disk inherit a variety of different levels of security under windows. I have occasionally gone to one of my old XP boxes and "wiped" the security settings by resetting everything via Windows XP. Because the NAS is so slow, this process can take several hours and must not be interrupted by attempts to do anything affecting the NAS by any of my other networked computers. To avoid problems with my photo archive, it makes sense to me to do all my editing on copies which have been extracted from the NAS archive and stored on the C: drive (boot drive) of my Win X64 system.
What I seriously need to know is this: When/If I define a "watched" portion of my file system, rather than taking the time to manually import every little change to my photo archives, can I expect the Photoshop Elements Organizer to work properly as long as everything stored on the NAS is stored via the same system which runs Elements with the same active "user" in control so that all the windows 7 file security settings putting stuff on the mapped NAS drive remain properly secured under Win 7 X64? Frankly I don't care if the files appear "read only" to every other system and identity on my network, but I do need to be able to "see" them. I have been able to view slide shows and movies stored on the NAS via both my networked iPad, my Apple TV, and using Samsung's funky android and Windows compatible software. Frankly, I doubt that Microsoft or Apple has full understanding and control of the environment where there is no host "server" other than the eprom based stuff my Linksys E3000 loads to emulate early Windows Media Management architecture, but I mange to get it to work as long as I don't try anything sophisticated with the file permissions. As a fall back, can I expect individual "imported" bits out on the NAS to remain stable if indexed and used only by the Elements Organizer running on my Win 7 X64 system?
I am seriously considering converting an old WinXP desktop into a UNIX box which could be configured as a "Server" for everything stored on the NAS and be done with my problems in return for the power required to run the server all the time so stuff is there when I need it. Any recommendations?
Message was edited by: [email protected]

Adobe hasn't said whether it officially supports PSE 7 on Windows 7. But reports are starting to trickle in that PSE 7 works fine on Windows 7 for most people, though a couple people have reported crashes. My PSE 7 seems to work fine, though I primarily use PSE 8 now. This is all very preliminary, and we'll learn more as more people post here.

Adobe Photoshop Elements 10 and Adobe Premiere Elements 10 trial versions?

Adobe Photoshop Elements 10 and Adobe Premiere Elements 10 came with my new HP desktop. Are they trial versions? How can I tell?

Hi,
What is your machine ? You can check its specs to work this out.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Adobe Photoshop Elements 10 Installation problem

The installation stopped with the following error: "The wizard was interrupted before Adobe Photoshop Elements could be installed. Below mentioned application has failed to install: Shared Technologies." My operating system is Windows 8 64 bit. I need help to finish the installation.

This has been happening a lot to people who upgrade to Yosemite. Here's what adobe suggested a couple of years ago when it was happening to a few people:
Mac App Store version is German | Photoshop Elements

Adobe Photoshop Elements 10 Version 10.0 FREEZING~

Hello, there. I'm having some issues with my Adobe Photoshop Elements 10, version 10.0.
For some reason, every single time I click on "Editor", it will freeze after it gets to the FINAL screen saying "Initializing".
I'm running Windows 7 64bit, Toshiba Sattelite
Software came as a bundle, for Christmas, with my new Intuos Creative Pen and Touch tablet.
I'm a graphics artist and NEED this photoshop to add watermarks and texts to the works I make.
I've tried giving it more than an hour to load up, emptied my disc spaces, defrag'd my harddrives, cleared my settings..
Everything listed on these forums. None of these seem to work.
I even tried contact Adobe Customer Support.. but they said they no longer help people with support once they come out with a newer model for sale.
(A HUGE dissapointment, mind you)
So, I'm going to include a screenshot of the way it's behaving here, so there is NO mix up on the issue at hand.
http://fc08.deviantart.net/fs71/f/2014/005/f/f/photoshoperror_by_pokebra-d711mog.png
http://fc05.deviantart.net/fs70/f/2014/005/e/b/photoshoperror2_by_pokebra-d711mn8.png
Any advice on how to fix this issue would be greatly appreciated..
Thanks a ton~

Freezing is very common in the last two weeks because USA itself is frozen with vortex of snow and ice. I hear white bears are roaming streets NYC.
In your case, assuming you are sitting in a warm room, give three finger salute AND click on the Editor icon to see if it clears the preferences file and start in default mode. To do this:
1) Press CTRL+ALT+SHIFT and Click on the Editor icon at the welcome screen. the process is similar to this one at this link: <http://forums.adobe.com/message/5983210#5983210> except that you need to click on the Editor icon.
Hope this helps.

Adobe Photoshop Elements 10 Language Problem

Hi all!
I've a problem with Adobe Photoshop Elements 10 Editor.
I bought Elements 10 Editor from the app store (I've a Mac) some months ago and I chose the english language during the installation.
Today it happened that, when I opened it, I found it totally in German! How can I restore english language?

This has been happening a lot to people who upgrade to Yosemite. Here's what adobe suggested a couple of years ago when it was happening to a few people:
Mac App Store version is German | Photoshop Elements

I have an old version Adobe Photoshop Elements 5.0 that I have used on an old computer with Windows XP.

Does this old version works under Windows 8?

Thanks for your answer. I will try that
Robert
Från: Ned Murphy
Skickat: den 24 januari 2015 18:51
Till: Robert Magnusson
Ämne: I have an old version Adobe Photoshop Elements 5.0 that I have used on an old computer with Windows XP.
I have an old version Adobe Photoshop Elements 5.0 that I have used on an old computer with Windows XP.
created by Ned Murphy <https://forums.adobe.com/people/Ned+Murphy> in Downloading, Installing, Setting Up - View the full discussion <https://forums.adobe.com/message/7127948#7127948>

Adobe Photoshop Elements 9 won't recognize HP Photosmart Premium C410

My HP Photosmart Premium C410 works with all my applications except Adobe Photoshop Elements 9 - which is great for an imaging program!! The printer is defintely selected as default. However, there are two options avilable on the "print" page of PSE and they are very similar - perhaps indicating an issue. The first on the drop-down is "HP Photosmart Prem C410 series fax", while the second (which I have selected) is "HP Photosmart prem C410 series". Every time I try to print from PSE, it starts up the fax process.....!! Anyone any ideas - all advice gratefully received.
This question was solved.
View Solution.

Kellerrolf,
Please try to rename the "HP Photosmart Premium C410 series Fax" to "PS C410 Fax". You can change it by:
Open "Printers"
Right click the HP Photosmart Premium C410 series Fax and selecting rename
If it still is loading the fax when you printer there are few more steps that we can try.
Andrew
Please know that I work for HP but my posts and replies are my own.
*Say thanks by clicking the "Kudos! Star" which is on the left*
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

Adobe Photoshop Elements 11 People Recongnition

Similar Messages

Maybe you are looking for