Adobe Photoshop Elements 12 problem please help

I bought Adobe Photoshop Elements 12 and when I try to go to photoshop and click sign in and I type my password and e-mail address in and click sign in it says please wait for a moment then it closes out and nothing happens and btw i have a pc

Elements 12 - not working

Similar Messages

  • Photoshop Elements 6 problem - please help

    hi.  can i download an older version of photoshop elements on my computer without a disk.  i have photoshop elements 6.  my computer had to be totally cleaned and i lost my photoshop and i want to be able to load it again.  i have the original package that has case with serial numbers but the disk is all scratched up and is unreadable.  i really don't want to buy program again if i don't have to.  any help is great.

    Unfortunately even if there were a download it wouldn't help you, since back then disc versions and downloads had mutually incompatible serial numbers. You would need to find another disc to copy to something like a thumb drive on a computer with an optical drive, then copy the files to your desktop to run the installation.

  • Adobe Photoshop Elements 8 Problem

              Ok so here is the problem. I have a windows vista. If that has anything to do with my problem. But the thing is everytime i try to download it i get a report saying i can acess it and it is already installed, but i can not find the file it is under. Could it be a computer error? Help if you can. Im not very good with computers my self so this would help alot. Thank you =)

    Check if there is an entry of Adobe Photoshop Elements 8.0 in your Add and Remove Programs wizard inside Control Panel. If not, it might be that due to some previous attempt PSE is installed on the system partly and for some reason did not rollback properly.
    Look at the below link and try removing the corresponding entries for PSE 8 from the machine, and then try to run the installer with admin user again:
    http://kb2.adobe.com/cps/405/kb405847.html
    Make sure that you are not running any Antivirus (Espscially Norton) while installing PSE. You can resume the protection later once the installation is done successfully.
    Regards,
    Ankush

  • Aperture 3 and Adobe Photoshop Elements 10 problems.

    I have installed Adobe Photoshop Elements 10, which I have setup as plugin for Aperture 3. In Aperture preferences the photos are exported as 8 bit TIFF 300 DPI, no profile and automatically stack new versions selected in general.
    I right click on selected image (version) in Aperture and select edit with Elements, this create another version of the same photo in Aperture but increasing size from say 5MB to around 40MB.   The Elements programme opens in Elements editor but the selected image is not there, I can only drag it in from Aperture.   I then edit the image, then click save, it open a box save as and to a wierd folder like Uwvo2vg  etc.   I click save, get message saying it will overwrite file of same name, click save  using a unique name.   When I go back to Aperture, the edited file is not there and when I search for the unique name, nothing comes up.

    I had somewhat similar problems running Elements 10 as external editor, but under 10.6.8. The simplest fix is to send .psd's instead of .tiff. You can change that in preferences.
    If you must use .tiff (I do, becaues PTLens doesn't like psd) you have to change the file extension to .tiff in the save dialog. Elements saves as .tif and Aperture saves as .tiff. Notice the number of 'f' at end of extension.
    Here's what was happening to me, which is a little different:
    • when you send to external editor, Aperture saves a .tiff and opens it in in Elements
    • you do your work and close the file
    • Elements saves as .tif, and so doesn't overwrite the Aperture tiff.
    • Aperture doesn't know the .tif exists so it shows you the un-edited .tiff that if made at the beginning
    I get around this at the save dialog in Elements. Basically Elements goes into a Save As kind of dialog, so if I add the extra 'f' at the end, Elements asks if I want to over-write the existing file, and when I say yes the changes show in Aperture.
    If you open Elements and go to 'Recent Files' (or something like that), you can see the .tif and .tiff files together. If you delete the .tiff and add the extra 'f' to the Elements .tif, the changes will show in Aperture.
    What you shouldn't be doing is changing the name of the file in Elements. For the edits to show in Aperture you need to save the file with the same name and change the extension to .tiff. The file that Elements saves must have exactly the same name as the one Aperture made, because that's the file that Aperture knows about.
    If you do a library database repair, Aperture will find these .tifs and add them to the library, but they won't be where they should be. The show up in a recovered file folder at the bottom.
    Note that Elements 8 didn't have this kind of trouble. And note that I'm not running Lion, so some of the behaviors I describe may be different that what Lion users see.

  • Adobe Photoshop Elements Effect Problems

    I own Adobe Photoshop Elements 6.0 and like to play around in it. I used to own a basic copy of Adobe Photoshop and two of my favorite tools were the lighting effect and lens flare tools. In my current version of Photoshop, when I try to use them, the message "The command "Lighting Effects" is currently not available." This also happens with a few other effects I try to apply, and I'm wondering how to remedy this. Any help is greatly appreciated!

    Well, works perfectly here... (PSElements 6 “Mac”)...
    Select your image or specify an area...
    Go to Filter / Render / Lighting Effect.../ and specify your desired options...
    If that doesn’t work, delete the preference file...
    If that doesn’t work either, you might have to reinstall PS Elements...
    Regards
    Nolan

  • I can't open Photoshop Elements 8 (Editor) Please Help

    Hello,
    I am new here and I am hoping I can get someone to help me out.
    I've recently Downloaded Photoshop Elements 8 (trial) for my Brand New Computer (I use Windows 7)
    in hopes of purchasing it after learning the program a little bit, well I'm glad I haven't purchased it yet since I've run into a problem
    I cannot get Photoshop Elements Editor to open, I can however use the organizer.
    I have already tried the following things in hopes of fixing this problem
    Uninstal-Reinstal
    Services, Flexnet and made sure it was on
    Pushed Control Alt and Shift and clicked on the editor button
    all with no luck.
    I'm really hoping someone has had this problem before and can help me out, I was really looking forward to using this program since I also own Photoshop Elements 6 and the same thing happend (I found out it is not compatible and have since uninstalled it)
    Thank you so much for your help
    Micheline

    I am having the same issue exactly.  Could someone please help?  I'm quite frustrated.  I just got a new computer and couldn't wait to try out PhotoShop on it.
    HELP!!
    Thanks!

  • Adobe Photoshop Elements 10 installation disk help needed

    I bought Elements 10 from the Apple store awhile ago, but have just got around to installing it for the first time.  CD 1 won't autoplay and I'm not sure what to do from here.  Somewhere it was suggested to try downloading the trial version and entering the serial #, when prompted to purchase, but I can;t get the trial version to work.  Any help would be appreciated. Thanks

    In what way is the trial version not working for you?  Also if you have only purchased Photoshop Elements 10 then Disc three should be labeled stating it is for Mac OS.  You can find more details at Install Premiere Elements, Photoshop Elements - http://helpx.adobe.com/photoshop-elements/kb/install-premiere-elements-photoshop-elements. html.

  • Adobe Photoshop Elements 12 - problems downloading

    I have Windows 7 on my computer, and Photoshop Elements 12 will not download properly.  When I checked further on my computer, it is the Windows XP compatible version.  How do I get the correct version to download?

    If you downloaded PSE 12 for Windows then you downloaded the correct version.  There are only two versions, one for PC and one Mac.  The PC version covers Windows XP SP3 thru Windows 8.1.
    If you are having a problem downloading you can always try a direct download of the trial version thru the fllowing site. 
    Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
    Photoshop/Premiere Elements 12:
    http://prodesigntools.com/photoshop-elements-12-direct-download-links-premiere.html

  • I purchased a Adobe photoshop elements 12 and when i try to install it with the serial number provided in the dvd case box, this error appears: we are unable to validate this serial number to adobe photoshop elements 12. Please, someone give me help on th

    I need your prompt response and help. Thanks.

    You keep asking variants on this same question. You've had replies in all your other threads. If you can't find them, go here and click where it says Activity:
    Thomas Cannon Jr.

  • I'm unable to open Photoshop Elements 12 Editor, please help?

    Purchased & opned fine earlier today, however have not been able to open Editor all evening. I'm on windows 7, all help appreciated please..

    How are you opening it? From the welcome screen, from the organizer, from the actual .exe file? Do all those ways fail? No message?

  • Photomerge panorama in elements 7 problem, please help

    Hello, I am having difficulty making a photomerge panorama with elements 7.  Here is how I am going about it:
    I have 3 files saved as jpegs I want to stitch. I open a file from its location in My Pictures, minimize it, then do the same for the next two pictures.  I do this in order of left picture, center picture, right picture. Using  the small pane at the bottom of the elements window, I hold down ctrl and click each of the three open pics to select them.   Then I go to file and select new, photomerge panorama. A window pops up for making a new photomerge panorama, but nothing pops up staggered behind it--no new empty file screen or winows ocntaining my open files as I have seen in the tutorials). I leave it on auto and click add open files. All three titles show up in the window. Then I click OK. Nothing happens. There is no new file window for it to create a panorama in. I do not get an error messae. Just nothing as if I made no command. Can anyone tell me how to correct what I am doing to make it work?
    Thank you

    Juergen_d- thank you.
    All I needed to do was stop minimizing the photos to the bin. When I left them all open on the elements desktop, it worked seemlessly. Amazing- thank you!

  • Adobe Photoshop Elements 12 won't just Install

    Hi there,
    I purchased a licensed  Adobe Photoshop elements 12 from the UK and installing it in Uganda. However when i tried installing it on my iMac running Mac 10.6.8 it failed at the 99% with an error message "the software your trying to install is a counterfeit" not genuine. what could be the cause of this and how can i over come it? I know for sure its a genuine copy of Adobe Photoshop elements 12. Any help
    Thanks
    Aggrey

    The problem might stem from the purchase location versus the install location.  Normally you have to buy Adobe software thru local channels.

  • I just purchased Photoshop 13 for PC MS Windows 8.1  In trying to install, I get the following message after clicking on the 2nd file.  "The file archive part of Adobe Photoshop Elements 13 is missing.  You need all parts in the same folder in order to ex

    I just purchased Photoshop 13 for PC MS Windows 8.1  In trying to install, I get the following message after clicking on the 2nd file.  "The file archive part of Adobe Photoshop Elements 13 is missing.  You need all parts in the same folder in order to extract Adobe Photoshop Elements 13.  Please download all parts.:  I've also gotten an Exit Code: 7 when trying to install.  I've turned my McAfee virus system off while trying to install. 

    Hi,
    Have you tried downloading Photoshop Elements 13 from here?
    https://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
    There is only one file to download - which one depends on your system (32-bit or 64-bit).
    These are the trial versions but will convert to the full version when you supply your serial number.
    Brian

  • How can i install the trial version of adobe photoshop element 13?

    how can i install trial version of adobe photoshop element 13? please some one tell me?

    PSE 13 Trial - http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements

  • PLEASE HELP! Adobe Photoshop Elements 8 editor won't open!!

    Hi! I'm new to the forums and to Adobe. So, I'm a little clueless about all this stuff.
    WELL
    everytime I click my Photoshop icon the welcome screen appears and the editor begins to load.
    However, the screen doesn't pop up at all. Just the welcome screen. It just shows the Photoshop Elements editor's small window on the bottom of my screen. I click on it and the editor doesn't show up at all.
    It did this a couple of times before. But, now the editor isn't showing.
    My organizer works just fine, but I'm wondering if I can somehow open Photoshop's editor on the organizer?
    If you could please PLEASE PLEASE HELP ME and reply as soon as possible! I would love to draw  and color on Photoshop again as soon as I have fix this problem!
    Thank you so much!
    -Marley

    Try making a direct desktop icon for the Organizer and Editor and that will bypass the welcome screen and any advertising.
    On Windows right click on the desktop and select New >> Shortcut
    Browse to Computer OS C:
    And find the PSE Organizer application in Program Files or Program Files (x86) on Windows 7 - 64 bit.
    Inside the Adobe >> Photoshop Elements Organizer (yellow folder) you are looking for an application file “PhotoshopEementsOrganizer” with six small icons (e.g. representing thumbnails)
    Select it and click OK
    Click next
    Rename by taking out Photoshop Elements leaving just the word Organizer
    Then click finish
    You should now be able to launch directly form the desktop by double clicking on the icon.
    You can set up a similar direct link to the Editor application (.exe file which has the blue PSE icon). As before take out Photoshop Elements just leaving the description Editor and it will show up clearly on the desktop.
     You can keep the standard Photoshop icon which links to the welcome screen but I prefer to delete it from the desktop. If you ever need to get to the welcome screen you simply click Window >>Welcome on the top menu when the application is open.
     

Maybe you are looking for

  • Nasty iCal bug in Leopard

    Hi I think I have discovered a very nasty bug in Leopard iCal. If I try to do any kind of search in iCal, by typing in the search word into the search field, the list of found items is empty, although I can clearly see the items dimmed in the month v

  • CD stuck in the drive, how to remove it?

    I have a CD stuck in the drive, most likely by the up-lifting of the label. How can I eject this CD?

  • I have a question about my puppet animation???

    Hi, I have been makeing pony puppets in flash but I am haveing a problem with the ponys leg now it starts out like this: but when It gets to frame 8 the leg disapears and was suposed to mov as you can see in the other picture: But when I dubble click

  • Update issues in Windows 7 64-bit

    I re-installed Adobe reader x on windows 7 64bit and I had to click ignore on two registry update keys and it installed successfully. I tried to run an update, but it rolls back and fails due to a non-existent registry key (authority) error. Can't th

  • Auto Gate

    I just bought Audition 3 and, having worked with an eight year old version of Wavelab before, I am appalled at the lack of sophistication and user-friendliness of this software. I am jumping around hunting for the most basic of things (including in t