Adobe Photoshop Elements 12 won't update

Hi!
I installed Adobe Photoshop Elements 12 and Premiere Elements 12 from DVD to my new iMac that is running OS X Maverics.
Elements Organizer is crashing quite often and I found out that at least in some older versions the ElementsAutoAnalyzer might cause that kind of problems. So I unticked all check boxes at preferences Media-Analysis tab.Ele
I'm not sure yet, if that helped, because after that (unchecking check boxes from Media-Analysis), I tried to install updates (basically there is only Photoshop Camera RAW 8.2 update availabel via automatic update), but I was not able to install that, because installation program tells me that I must close ElementsAutoAnalyzer. How do I close it in OS X?  I even rebooted mac after unchecking of Media-Analysis stuff, but still the auto analyzer is loaded somehow / somewhere in system startup.
So, what I should do?
Best regards,
-Timo

Hi!
I did all things that was in nealeh's link. Basically I did steps 3 to 4, because I did step 1 yesterday and step 2 was not needed, because there weren't ElementsAutoAnalyzer process running.
At least now I was able to install the new update (Camera RAW 8.2). I'm writing this just after the update process, so I'm not made any picture moving to organizer's albums, but let's hope that disabling AutoAnalyzer helped for those crashes
I have (at least in my own opinion)  good experience of Windows systems, but I have had enought of those and started to use Mac instead of Windows. So basically I'm noobie about Macs with little of Linux knowledge - it didn't helped with this problem...
I would like to thank both of you for helping me to deactivate of this Element's "feature"!
Also I'm new with these Adobe forums --> is here some dedicated forum for Mac related things or what is the best way to give feedback or questions related to running Premiere Elements on Mac? In other words: If I came up with things that are worth of contributing to other Mac users, where should I write those things?
Best regards,
-TS Ahde

Similar Messages

  • Adobe Photoshop Elements 9 Won't Install Updates?

    I've received some notifications about installing updates for this product, but every time I try, it seems to be downloading, and then gives me the error page that essentially goes as:
    Some updates failed to install
    He following updates were unable to install. If you wish to install these updates, please fic the problems below and retry.
    Adobe Photoshop Elements 9.0.3 Update
    There was an error downloading this update. Please quit and try again later.
    And then I get the same message for a Photoshop Camera Raw 6.5 Update.
    When I looked at the customer service link, it took me to a page discussing the product not being qualified with a serial number or some such. Except, I have registered the product, and there doesn't appear to be any prompt to re-submit the serial number.
    Is this something to do with the creative cloud not upgrading products not part of the suite? Something else? I appreciate any and all responses.
    Thank you

    You're in the wrong forum.  This is not the Elements forum.
    Here's the link to the forum you want:
    https://forums.adobe.com/community/photoshop_elements/content

  • Adobe photoshop elements 11 won't read my canon T5 raw CR2 files.

    adobe photoshop elements 11 won't read my canon T5 raw CR2 files.
    why?
    need help!
    Solved!
    Go to Solution.

    Hi Zach.
    Sorry to say but Elements 12 came out several months before your camera. Adobe stops updating camera raw files for old software editions so that people have to buy new versions of the software when they get a new camera. It happened to me with LR3 when I got a new camera.
    There are works rounds but they are a lot of extra steps and I think you would be converting the files to Some format other than RAW (tiff?) and which I am not sure will perform the same.
    I think you just need to get a newer version of Elements.
    Scott
    Canon 6D, Canon T3i, EF 70-200mm L f/2.8 IS mk2; EF 24-105 f/4 L; EF-S 17-55mm f/2.8 IS; EF 85mm f/1.8; Sigma 35mm f/1.4 "Art"; EF 1.4x extender mk. 3; 3x Phottix Mitros+ speedlites
    Why do so many people say "fer-tographer"? Do they take "fertographs"?

  • Photoshop Elements 9 won't update, including camera raw

    I have Elements 9.  It currently has camera raw 6.1.  I need at least 6.3.  I have tried EVERYTHING to download the updates and they don't work and after downloading them, they say they fail.
    Essentially, when I go to "Help" and run the "Updates" provided by Adobe, they all fail.
    I just want to edit my raw photos on my nikon d3100.
    I bought this product, you should provide updates that actually work.  If you tell me that my camera will only work with a product that I yet have to pay $70 for...  I will be ticked. 

    Duplicate, see:
    Photoshop Elements 9 won't update, including camera raw

  • Adobe Photoshop Elements 9.0.3 Update - There was an error downloading

    The Adobe Application Manager repeatedly asks me to download an update. It repeatedly tells me there was an error downloading this update. What is going on here?

    You might try installing the update using the downloads from the pse update page:
    windows:
    Adobe - Photoshop Elements : For Windows : Adobe Photoshop Elements 9.0.3 update
    mac:
    Adobe - Photoshop Elements : For Macintosh : Adobe Photoshop Elements 9.0.3 update

  • Adobe Photoshop Elements 9.0.3 Update   There was an error downloading this update. Please quit and try again later.     Photoshop Camera Raw 6.5 Update   There was an error downloading this update. Please quit and try again later.

    Adobe Photoshop Elements 9.0.3 Update
      There was an error downloading this update. Please quit and try again later.
      Photoshop Camera Raw 6.5 Update
      There was an error downloading this update. Please quit and try again later.

    Hi,
    Which operating system are you running on?
    For PSE 9, the update process was best using a manual method.
    Are you trying to do Help - Updates?
    If so try these downloads (fand follow the manual instructions given on the pages.
    Adobe - Photoshop Elements : For Windows : Adobe Photoshop Elements 9.0.3 update
    Adobe - Photoshop Elements : For Windows : Camera Raw 6.5 update for Elements 9
    Adobe - Photoshop Elements : For Macintosh : Adobe Photoshop Elements 9.0.3 update
    Adobe - Photoshop Elements : For Macintosh : Camera Raw 6.5 update for Elements 9
    If you are getting an error during the download please try a different browser.
    Brian

  • Adobe Photoshop Elements 13 won't launch email with photos attached, why?

    Adobe Photoshop Elements 13 won't launch email with photos attached, why?

    Gordon,
    Are you trying to use email functionality in Elements Organizer and then witnessing this problem.
    If this is the case, I would recommend you to go through this article once and see i it helps:
    Elements Organizer Help | Share files and slideshows by email
    Thanks,
    Anwesha

  • Adobe Photoshop Elements 13 Won't launch

    My motherboard died.  I put a new motherboard in and have been reinstalling the OS (Windows 7 Professional) and reinstalling all of the programs.  I successfully re-downloaded Adobe Photoshop Elements 13 and entered my license key and it installs.  When I launched it, it came up to the welcome screen, but when I try to open the Organizer or the Editor, it won't launch!  I switched to startup in the Organizer versus the Welcome Screen and now it won't launch at all!
    I uninstalled the program and tried reinstalling.  It installed, but the program will not launch!

    Hi,
    Try starting the two applications directly by creating shortcuts to the following files.
    Organizer: "C:\Program Files\Adobe\Elements 13 Organizer\PhotoshopElementsOrganizer.exe"
    Editor "C:\Program Files\Adobe\Photoshop Elements 13\PhotoshopElementsEditor.exe"
    If you need help with creating the shortcuts then come back and I will explain how to do it.
    Brian

  • Adobe Photoshop Elements 4 won't open

    It worked fine from the day of buying until today.  I clicked the link in All Programs as usual and it opened onto the welcome page but none of the options will work at all.
    I use Windows XP Home Edition version 2002 Service Pack 3 with an AMD Athlon (rm) 64 x 2 Dual Core Pricessor 6000+ 3.02GHz, with 3.00GB RAM

    Go to c:\Program Files\Adobe\Photoshop Elements 9\Locales\<locale>\Plug-Ins\Import-Exportand you will find twain plug-in. Remove that plug-in from that location and copy it somewhere else.
    Now launch PSE and check if it works.
    Alternatively,
    Try resetting the PSE preferences by
       1. Close Elements.
       2. Launch the Photoshop Elements Welcome Screen and hold down ctrl + alt + shift as you click Edit.
       3. Continue to hold the keys until you see a message box asking if you want to delete Photoshop Elements settings file; click Yes. Elements will open with default preferences.
    In case any network printer is attached try to launch without network or printer uninstall.
    try and let me know your comments.
    -Garry

  • Adobe Photoshop Elements 12 won't just Install

    Hi there,
    I purchased a licensed  Adobe Photoshop elements 12 from the UK and installing it in Uganda. However when i tried installing it on my iMac running Mac 10.6.8 it failed at the 99% with an error message "the software your trying to install is a counterfeit" not genuine. what could be the cause of this and how can i over come it? I know for sure its a genuine copy of Adobe Photoshop elements 12. Any help
    Thanks
    Aggrey

    The problem might stem from the purchase location versus the install location.  Normally you have to buy Adobe software thru local channels.

  • Adobe Photoshop Elements 9 won't recognize HP Photosmart Premium C410

    My HP Photosmart Premium C410 works with all my applications except Adobe Photoshop Elements 9 - which is great for an imaging program!!  The printer is defintely selected as default.  However, there are two options avilable on the "print" page of PSE and they are very similar - perhaps indicating an issue.  The first on the drop-down is "HP Photosmart Prem C410 series fax", while the second (which I have selected) is "HP Photosmart prem C410 series".  Every time I try to print from PSE, it starts up the fax process.....!!  Anyone any ideas - all advice gratefully received.  
    This question was solved.
    View Solution.

    Kellerrolf,
    Please try to rename the "HP Photosmart Premium C410 series Fax"  to "PS C410 Fax". You can change it by:
    Open "Printers"
    Right click the HP Photosmart Premium C410 series Fax and selecting rename
    If it still is loading the fax when you printer there are few more steps that we can try.
    Andrew
    Please know that I work for HP but my posts and replies are my own.
    *Say thanks by clicking the "Kudos! Star" which is on the left*
    Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

  • Help! My adobe photoshop elements 9 won't work when i open it up!

    Help, please! I have a Adobe Photoshop elements 9 and everytime i save a picture then the next day i try to open my save picture it tells me "This product has encountered a problem which requires that you restart your computer before it can be launched.
    If you continue to see this message after restarting your computer, (which i do) Please contact either your IT or adobe tectnical support for help, and mention the error code shown at the bottom of this screen
    Error: 150:30
    http://www.adobe.com/support/"
    They told me they couldn't help me with this problem or the chat and phone support doesn't help with people who have Adobe Photoshop elements 9 anymore. What should i do?

    That is a licensing error, it has nothing to do with opening files, just with opening the application. Check our documentation on this error:
    Error "Licensing has stopped working" | Mac OS - Adobe
    Error "Licensing has stopped working" | Windows - Adobe

  • Adobe Photoshop Elements 12 Won't Stay Open!!!!

    Just got it Pricey Software Not Functing!!! Everytime

    Hi,
    On Win go to
    For Windows (32 bit), copy the Import-Export folder from:
    C:\Program Files\Adobe\Photoshop Elements 12\Optional Plug-Ins\
    into
    C:\Program Files\Adobe\Photoshop Elements 12\Plug-Ins\
    For Windows (64 bit), copy the Import-Export folder from:
    C:\Program Files (x86)\Adobe\Photoshop Elements 12\Optional Plug-Ins\
    into
    C:\Program Files (x86)\Adobe\Photoshop Elements 12\Plug-Ins\
    *The version number is 11 or 12, depending on the Photoshop version you have installed.
    On mac
    copy the ImportModules folder from:
    //Applications/Adobe Photoshop Elements <version number>/Support Files/Optional Plug-Ins
    into
    //Applications/Adobe Photoshop Elements <version number>/Support Files/Plug-Ins
    Now launch PSE and check if it works.
    Alternatively,
    Try resetting the PSE preferences by
       1. Close Elements.
       2. Launch the Photoshop Elements Welcome Screen and hold down ctrl + alt + shift as you click Edit.
       3. Continue to hold the keys until you see a message box asking if you want to delete Photoshop Elements settings file; click Yes. Elements will open with default preferences.
    - Disable any anti-virus software just to confirm if it is not blocking PSE Editor.
    In case any network printer is attached try to launch without network or printer uninstall.
    -Harshit yadav

  • Photoshop Elements 8 won't update RAW

    I have pse 8 for windows. i need to update my RAW support 6.2 for Canon t2i.  I downloaded the RAW upgrade and installed it.  It still won't read the RAW pictures.  I look under the Help>about plugin>camera RAW and notice that it is stucked at 5.5.  I tried to installed it twice and manually copy the file over.  I also notice that I am running 8.0 of pse (20090905.r.605812).  Is this the most recent version of PSE 8?  And how can I install the RAW upgrade?  thanks

    steven_yvr wrote:
    Sorry but it makes no difference.  It is stuck at 5.5
    Have you done this (inpartucular see point 5 below):
    Photoshop Elements:
    Windows®:
    NOTE: You must follow all of the new instructions in order to successfully install the Camera Raw Plug-in for Photoshop Elements.
    1. Exit Photoshop Elements.
    2. Open the download file and double-click CameraProfiles.exe and follow the on-screen instructions.
    3. Double-click Local Disk (C:).
    4. Navigate to the following location:
    a. Program Files\Common Files\Adobe\Plug-ins\Elements 8\File Formats
    5. Move the existing Camera Raw.8bi plug-in to another location (for example, a new folder on your desktop). Ensure you keep this version in case you need to revert back.
    6. Copy the Camera Raw plug-in, Camera Raw.8bi, from the download into the same folder as Step 4.
    7. Launch Photoshop Elements
    Good luck.

  • Adobe Photoshop Elements 10  Won't Open

    I can't get the software to open.  I got "400 eror" message once.  Now I don't get anything.  I changed my browser to :http://www.mozilla.org/products,mfirefox/ (per a suggestion from adobe that I got on line.  I also tried to set up my computer to do a test toaccept cookies from another suggestion by adobe, but when I got to the site there was not test  That was http:///photoshopelementsuser.com/cookietest.php.  My sotware was installed 2 years ago when I got a new computer and I only looked at it once and it was OK.  Now I am trying to use it and it won't open. Can anyone help me?  Thanks

    This is the Reader forum. You should ask in the Photoshop Elements one,
    http://forums.adobe.com/community/photoshop_elements

Maybe you are looking for

  • Some of my music has gone - how do I get it back?

    I have just opened iTunes and all my music in the Classical genre have gone! Why has this happened and how can I get my music back?

  • I cannot open iBooks on my iMac.

    When I try to open iBooks on my iMac I get the following message.  I have never been able to open iBooks from day one.  Since I haven't had a need to use it on  my iMac I just let it go, but now I would like to start using it.  What might be wrong? T

  • SSL from EJB using Verisign API

    I'm trying to make a call from a session bean in WL6.1 SP1 to Verisign's PFProAPI class. I have successfully used the API in other setups (in servlets, etc.), but cannot seem to get it to work from within an EJB. The verisign test server just keeps r

  • Safari can't find Adobe Reader

    When I go to load a pdf file in Safari a dialog window opens wanting me to direct it to Adobe Reader. This started to happen when I deleted Reader 7.0.5 and installed a fresh copy of Reader 7.0.7. Any suggestions on how to fix this?

  • Yearning for Sun Certified Java 2 Programmer

    Hello all Java ppl out there. I have been programming in Java for about 3 years now. A few months back I sat for this exam but failed by 2 points. Hence I was very disheartened and told myself not to get myself certified again. Recently I've been thi