Adobe Photoshop Elements 8 Problem

          Ok so here is the problem. I have a windows vista. If that has anything to do with my problem. But the thing is everytime i try to download it i get a report saying i can acess it and it is already installed, but i can not find the file it is under. Could it be a computer error? Help if you can. Im not very good with computers my self so this would help alot. Thank you =)

Check if there is an entry of Adobe Photoshop Elements 8.0 in your Add and Remove Programs wizard inside Control Panel. If not, it might be that due to some previous attempt PSE is installed on the system partly and for some reason did not rollback properly.
Look at the below link and try removing the corresponding entries for PSE 8 from the machine, and then try to run the installer with admin user again:
http://kb2.adobe.com/cps/405/kb405847.html
Make sure that you are not running any Antivirus (Espscially Norton) while installing PSE. You can resume the protection later once the installation is done successfully.
Regards,
Ankush

Similar Messages

  • Adobe Photoshop Elements  problem

    When I installed Adobe Photoshop Elements 6 on my Mac, I made a stupid mistake (didn't realise at the time what i was doing, but...oops.) To keep all my art-type software together, i dragged it into a folder. Now, when I try to update it, it says 'Can't update - unable to locate files. I uninstalled it, then re-installed: this hasn't helped at all. Same problem.
    I can use the program - tho don't know how much I'm unable to access because of this.
    Any helpful suggestions?
    One other slightly related problem: I have a Wacom Intuous 2 A4 Oversize. When I installed this & tried to use it, the pen/mouse work on tablet, but a message comes up: 'No Driver Installed. Visit website to install'. I've done this several times, the correct driver appears to install with message saying it's been successful, yet when I try to use it, 'No driver' box appears.
    I've tried uninstalling the whole app, then reinstalling; no luck. I know it should work with my Mac, as it's fine with someone who has the identical Mac set-up & Wacom as mine. (Shame i've lost her number...)
    Once more, any ideas gratefully received.
    Apologies if this isn't correct place 4 these questions - can't find any more relevant forum.

    If you didn't put the PSE folder back into the top level of applications before you ran the PSE uninstaller (you did use the uninstaller, right?), I'm afraid you've made kind of a mess that's going to take some rooting around to sort out. You need to download and run this:
    http://www.adobe.com/support/contact/cs5clean.html
    (I'm hesitant about linking this version, but the older cleanscript isn't available any longer, so it's what you'll have to use--PSE is based on the PS code). Then look around and manually remove what you can find. Don't use Spotlight to search--it won't find these kinds of files. You want to look in Library>application support>adobe particularly (note that this is the library at the top level of your hard drive, not system>library or your username>library).
    EDIT If you have any other adobe products installed, I would deactivate/remove them before using this, regardless of what the technote says.

  • Adobe Photoshop Elements Problem with update 9.0.3

    Problem with updates Elements 9.0.3
    Message title was edited by: Brett N

    Then follow the rest of the directions here:
    Error "Patch cannot be applied" | Photoshop Elements 9.0.3 update | Windows
    http://helpx.adobe.com/photoshop-elements/kb/error-patch-cannot-applied-photoshop.html

  • Having installed an upgrade for Photoshop Elements 13, I cannot open the application. I get an error message saying "Adobe Photoshop Elements Editor cannot be opened because of a problem. Check with the developer to make sure Adobe Photoshop Elements Edit

    Having installed an upgrade for Photoshop Elements 13, I cannot open the application. I get an error message saying "Adobe Photoshop Elements Editor cannot be opened because of a problem. Check with the developer to make sure Adobe Photoshop Elements Editor works with this version of OS X. You may need to reinstall the application. Be sure to install any available updates for the application and OS X".
    I have since uninstalled and reinstalled the app, but get the same error message.

    Which version of OS X do you have? It's not clear from your post whether "installed an upgrade" means you just installed PSE 13 as an upgrade or you installed an update to PSE 13, like ACR 9 or 13.1. Please clarify.

  • I have been using Elements 12 without a problem for 9 months.  Now when I try to open the program, I get an error message  "Adobe Photoshop Elements 12 quit unexpectedly" and it will not open at all.  What can I do to open the program?

    I have been using Elements 12 without a problem for 9 months.  Now when I try to open the program, I get an error message  "Adobe Photoshop Elements 12 quit unexpectedly" and it will not open at all.  What can I do to open the program?

    Thank you for responding.  Nothing actually worked!  After reading the posts online, I called Apple.  They indicated they have seen problems with some software after their upgrades.  The technician was able to fix the problem on my computer remotely, but I have no clue what he did!  But, it was definitely related to their recent upgrade to my computer.

  • Im having problems installing Adobe Photoshop Elements 8

    Hello!
    Please excuse my bad English. I help myself with Google translate.
    I have a Mac OS X 10.6.6.
    Even one month before I download the and installed a trial version of Adobe Design Premium CS5. Trial period has expired. I intend it in the short to buy.
    But the problem I have with PSE8.
    I bought a Wacom intuos tablet. So I can download Adobe Photoshop Elements 8. But I can not install the program.
    I tried all three tips but I did not succeed. then I clicked the button More informations.
    It has opened up another window titledPackage for Suport. The content is as follows: Please copy the "key" bellow to a safe location and press Close. You will need this key if you open a support case with Adobe. If you need this key I will be sent it separately.
    Please help me install PSE8.
    Thank you very much for the reply
    s. Aleša

    Well now the forum finally working like it should. I was always logged in, I saw my name at the top. However, when I clicked on the link Log / Registration, came forward error 404th I waited one hour without logging off and re-clicked. Finally, the forum in my browser started to work normally.
    There is no problem that would not be able to send files to the server from which it can take you. The problem is that my /Library/Logs/Adobe/  folder is empty. How is it that the folder is empty? I have installed Adobe Design Premium CS5 too, although tryal version has expired. And even these files can not look in the folder. PSE8 but I can not even until the end of Installations.
    So I tried to send Screnshot to you to see that the folder is empty. I know that you need a file, but how do I send it to you, if the file is not in the folder?
    Maybe I have the settings set to not see certain files?
    I called the support in my country, but only help those who have bought the program in their company. :-((( 

  • Aperture 3 and Adobe Photoshop Elements 10 problems.

    I have installed Adobe Photoshop Elements 10, which I have setup as plugin for Aperture 3. In Aperture preferences the photos are exported as 8 bit TIFF 300 DPI, no profile and automatically stack new versions selected in general.
    I right click on selected image (version) in Aperture and select edit with Elements, this create another version of the same photo in Aperture but increasing size from say 5MB to around 40MB.   The Elements programme opens in Elements editor but the selected image is not there, I can only drag it in from Aperture.   I then edit the image, then click save, it open a box save as and to a wierd folder like Uwvo2vg  etc.   I click save, get message saying it will overwrite file of same name, click save  using a unique name.   When I go back to Aperture, the edited file is not there and when I search for the unique name, nothing comes up.

    I had somewhat similar problems running Elements 10 as external editor, but under 10.6.8. The simplest fix is to send .psd's instead of .tiff. You can change that in preferences.
    If you must use .tiff (I do, becaues PTLens doesn't like psd) you have to change the file extension to .tiff in the save dialog. Elements saves as .tif and Aperture saves as .tiff. Notice the number of 'f' at end of extension.
    Here's what was happening to me, which is a little different:
    • when you send to external editor, Aperture saves a .tiff and opens it in in Elements
    • you do your work and close the file
    • Elements saves as .tif, and so doesn't overwrite the Aperture tiff.
    • Aperture doesn't know the .tif exists so it shows you the un-edited .tiff that if made at the beginning
    I get around this at the save dialog in Elements. Basically Elements goes into a Save As kind of dialog, so if I add the extra 'f' at the end, Elements asks if I want to over-write the existing file, and when I say yes the changes show in Aperture.
    If you open Elements and go to 'Recent Files' (or something like that), you can see the .tif and .tiff files together. If you delete the .tiff and add the extra 'f' to the Elements .tif, the changes will show in Aperture.
    What you shouldn't be doing is changing the name of the file in Elements. For the edits to show in Aperture you need to save the file with the same name and change the extension to .tiff. The file that Elements saves must have exactly the same name as the one Aperture made, because that's the file that Aperture knows about.
    If you do a library database repair, Aperture will find these .tifs and add them to the library, but they won't be where they should be. The show up in a recovered file folder at the bottom.
    Note that Elements 8 didn't have this kind of trouble. And note that I'm not running Lion, so some of the behaviors I describe may be different that what Lion users see.

  • I have bought Adobe Photoshop Elements 10 last August 2013 and having problems with installing it on Windows 8.1?

    I have bought Adobe Photoshop Elements 10 last August 2013 and having problems with installing it on Windows 8.1.  Why am I having this problem?

    You can check you Adobe account online to see if the serial number is registered under your account.  If not then your only option will likely be to contact Adobe Support directly thru chat to see if they can provide you with a/the serial number. For them to do so will require you being able to prove ownership.
    Serial number and activation chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

  • Problem with Adobe Photoshop Elements 12 & Adobe Premiere Elements 12

    I have purchased the Adobe Photoshop Elements 12 & Adobe Premiere Elements 12 set,  I  followed instructions for download and installations, I still can not access them.  Please, please help. Please fix the problem.
    Thanks!

    Ok, so what exactly have you tried which is not working?
    What steps have you taken?
    What do you see happening on the screen?

  • I can not get my Adobe Photoshop Elements 8 organize to open. The edit option comes up with no problem, but will crash when I try to access organize. What should I do to fix this problem?I can not get my Adobe Photoshop Elements 8 organize to open. The ed

    I can not get my Adobe Photoshop Elements 8 organize to open. The edit option comes up with no problem, but will crash when I try to access organize. What should I do to fix this problem?

    Hi,
    Which operating system are you running on?
    Try starting the organizer while holding down the shift key.  Hopefully, it should load the Catalog Manager.
    Select your current catalog and click on the Repair button. Once it has finished, click on the Open button to see if the catalog opens.
    Good luck,
    Brian

  • Adobe Photoshop Elements 2 and 'Save for Web' problem

    Hi everyone,
    I have used Photoshop Elements 2 for some time with absolutely no problems. However when I try to use the save for the web option I get an 'export could not be completed due to a program error' message.
    Nothing relevant is mentioned on Adobe's support site. After having gone through the usual 9 troubleshooting procedure I suspect that there is a problem with the 'Save for Web EL' plugin located in the PE 2 plugins folder. Has anyone else experienced this? Is there a way I can somehow find a functional plugin?
    Thank you for reading this post.
    PowerBook G4 DVI 667   Mac OS 9.2.x  

    I don't use Photoshop elements myself, but from Photoshop CS it works fine. I use JPG compression and optimization. First of all - make sure the file format extensions are all available. Applications/adobe/photoshop elements/file formats AND ALSO Applications/adobe/photoshop elements/photoshop elements only/file formats (here I am assuming the paths are the same or similar to Photoshop). Also, check the extensions disabled folder (Control click on Photoshop and go to package contents). If it's none of these, I suggest you check the settings in Elements when trying to save and make sure you are not using an option that conflicts.
    Also, check the Adobe forum. http://www.adobeforums.com
    Check for software upgrades also.
    You do have enough hard drive space and RAM I assume. If you are using PS Elements and virtual memory is on, you may not have enough phsyical space to save the file (but not likely)
    P.S. I see (after i wrote) that you are running 9.2.2 - so the paths will not be the same as if it was on OS X - but they will be similar.

  • Adobe Photoshop Elements 10 Language Problem

    Hi all!
    I've a problem with Adobe Photoshop Elements 10 Editor.
    I bought Elements 10 Editor from the app store (I've a Mac) some months ago and I chose the english language during the installation.
    Today it happened that, when I opened it, I found it totally in German! How can I restore english language?

    This has been happening a lot to people who upgrade to Yosemite. Here's what adobe suggested a couple of years ago when it was happening to a few people:
    Mac App Store version is German | Photoshop Elements

  • I'm having problems installing Adobe Photoshop Elements 12.

    I'm having problems installing Adobe Photoshop Elements 12.
    The problem is right at the end of installation, it (the Install Shield Wizard) says status is registering and then immediately does an action rollback.
    The message I get is:
    'The wizard was interrupted before Adobe Photoshop Elements 12 could be completely installed. Your system has not been modified. To complete installation at another time, please run the installation again.'
    If anyone can offer some help, please, that would be great.
    Thanks.
    Grant.

    This discussion has been moved from the Captivate forum to the Photoshop Elements forum.

  • I am having problems installing Adobe Photoshop Elements 11

    I am trying to install Adobe Photoshop Elements 11.
    The first error message comes up saying "The installation process has encountered an error while installing Shared technologies. Please restart your system and try again."
    I have tried restarting and still didn't work.
    It prompts me to download Adobe support advisor which I did and it has an error message to download Adobe Applications manager.
    The Adobe applications manager will also not install.
    Please help me install my photoshop program.

    check your install logs to find the problem: http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html

  • Problems installing Adobe Photoshop Elements 9 - Rollback action issue.

    Im having problems installing Adobe Photoshop Elements 9.
    The problem is right at the end of installation, it says status is registering and then immediately does an action rollback.
    The message "The wizard was interrupted before Adobe Photoshop Elements 9 could be completely installed. Your system has not been modified. To complete installation at another time, please run setup again."
    I have also created a new administrator account and after rebooting tried to install it but with the same result. It appears to get to the end of the program install but falls over just before the Organiser install. There are no error messages. AV and surplus programs have been stopped. Desktop clean up run.  XP machine well within required spec.
    Any help would be greatly appreciated.
    Thanks
    Dave

    Hi
    Thanks for your reply. Antivirus and security software all turned off. I have tried all the solutions in the troubleshoot section but still having the same problem.
    Much obliged
    Dave

Maybe you are looking for

  • CS6 file to CC

    Hello I have created a template for my friend but he can't edit it. I send him my after effects CS6 Project file but it does not work on after effects CC her is the error: 11 property links have been disabled: 1)'Color' (line 1) of layer 15 ('Floatin

  • .itl extension added to iTunes Library file

    Until the 10.4 (80) update, there was no .itl extension on the iTunes Library file. I know this, because i have 9 different iTunes Libraries spread over 4 different external hard drives. I have created Automator "workflows" to switch from one Library

  • Solaris 9 and WebSphere Commerce Suite 5.6

    We're upgrading our servers from Solaris 8 to 9. Does anyone know of any issues that may pop up with our WebSphere Commerce Suite 5.6, service pack 5 during or after the upgrade?

  • Problem with ADF BC 11G and datasource : javax.naming.NameNotFoundException

    Hi, My application works with ADF BC 10G but does not work with ADF BC 11g. In both cases I use the same data source. My application uses only the BC4J from ADF. The setting of the datasource in my EAR is only in the web.xml and weblogic.xml, as in 1

  • Converting MPEG-4 Audio File (Protected) to MP3

    New user purchasing tunes for my Lyrica MP3 player using daughters setup for IPod. Tunes downloaded in MPEG-4 audio file format and are 'protected'. When trying to convert to MP3 it won't because of its protected status. How can I convert them? If I