Adobe photoshop elements stopped printing to my printer.
I was making prints using adobe photoshop elements 10. It made 3 prints and then it stopped working. Now it hangs everytime that I hit the print option. What is the problem? The printer is working. Lightroom 5 printed one print and then it also stopped.
ArtSierra wrote:
I've tried to register the product to my account from within the program (going to Help > Register Product) but it still does not appear in my products and services on my account. This is an issue because I have lost the serial number and have switched laptops. I would like to get Elements 9 on my new computer. Please help.
I don't understand your question so let me try to dissect it step by step:
1) You have already got PSE8 on your machine but you don't have the serial number. Is this correct? If so, have you still got the DVDs for the product? The serial number should be on the sleeve or the case of the DVD so you can search for it.
2) You say you want to install PSE9 on a new laptop so I assume you have got the DVD and serial number for it. Is this correct? If so, what is the problem you are having when trying to install it?
3) You haven't said what is your operating system so please reply with this info so that further help can be given. As to getting the serial number from the old machine for PSE8, you can use Belarc Advisor tool for Windows and this can retrieve the serial number though I am not sure whether it will work for PSE8 because it is a very old program (about 4 years old) and Belarc may not be as sophisticated as it is today. These tools gets developed almost daily and earlier versions were not so good.
Similar Messages
-
Adobe photoshop elements 10 - printer install
Just downloaded free trial of Photoshop elements 10. When going to print it is asking me to install a printer. My printer is a Xerox Phaser. I have managed to print a couple of times from editing side of elements, so my printer is obviously installed, but now just keeps saying that I need to install a printer. Having looked on this forum it seems that this is a common problem with elements but no advice that is given on this seems to sort out the problem. I have previously had Adobe photoshop CS6 on the computer and had no problem whatsoever with printing. Help please
The only other suggestion is to check the print drivers. PSE10 will rely upon the latest printer drivers being installed. Some manufactures have web sites which enable you to run a scan to ensure you have the latest drivers. Apart from that I’m out of ideas, except to use the dedicated printer, or uninstall and re-install Photoshop Elements or print single images from the Editor. I can understand the frustrations because others have experienced similar problems where the printer works perfectly with all other application except Photoshop Elements.
-
Adobe photoshop elements stopped working on Mac Pro
in January 2014 adobe photoshop elements purchased at i-tunes store. Always worked properly. Now since about a week, I can not start the program. After startup, he asks to sign up with my Apple ID, when I do this it gives the error message: Your device or computer could not be verified. Please contact support for assistance. Have already had contact with i-tunes store, this let me know that this is something for Adobe.
Please comment!that's an apple error message so you should either:
1. contact apple to resolve.
2. uninstall photoshop elements (pse), reinstall using a link below and your pse serial number. before uninstalling make sure you can download the correct version/language and you have your serial number available.
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
window using the Lightroom 3 link to see those 'Important Instructions'. -
I have been using Adobe Photoshop Elements 11 for along time now. When I first used the program I had a different printer than I have now. Although I changed printers I never removed the software from my old one. Now this was never a problem until today. When I choose a printer I still had option to use the old one but always chose my new HP Envy 5530 and Adobe never had a problem printing from that new printer. However today I decided to remove my old printer from my computer and now my Adobe cannot find my new printer. How can I make it find the HP printer?
Try this --
Go to the bottom of the link I gave you, and you will see
click that link and then click the chat button to talk to an Adobe agent -
Hi everyone,
I've some problems about Adobe CC Series. For example, when I'm working in Photoshop then try to open printer properties, Adobe photoshop cc stopped working. Illustrator and InDesign have same problem. I've not got this problem in Adobe CS6 Series. Can you help me pleae?Hi Gguadagno,
For the problem that the issue is not happening on a different Account, Adobe does have a KB trying to save your orriginal account:
Windows:http://helpx.adobe.com/x-productkb/global/troubleshoot-unexpected-behavior-user-account-2. html
Mac: http://helpx.adobe.com/x-productkb/global/troubleshoot-unexpected-behavior-user-account.ht ml
Folowing these steps should actually result in either that you are able to work on your original Account, or that you at least did everything possible (according to Adobe) to save your account.
You should not be required to use a Second Email for using Photoshop, This does not make much sense, Your AdobeID and OS Account are (or at least should) not (be) linked to eachother.
Hopefully this will help you to work with the original Account again. -
Adobe Photoshop Elements 8 Selects Wrong Printer
My Platform:
HP Pavilion HPE-137c(2.50 gigahertz Intel Core2 Quad)
Windows 7 Home Premium 7(64bit build 7600)
8gb RAM
1tb Hard Drive
HP Officejet 6500 e709a
My Problem:
I select the following printer(Image 1), but Adobe Photoshop Elements 8 always tries to use the printer named HP Officejet 6500 E709a - Send Fax(Image 2), which isn't even installed on my system(Image 3)
Image 1
Image 2
Image 3
I have uninstalled and reinstalled print drivers and Adobe Photshop Elements to no avail. All other software prints OK.Doubtful that I can add much, but here is what finally worked for me:
I deleted (removed) the Fax version of my printer (which I never use) leaving only this version:
I can still use the fax from other PCs and from the printer itself ...just not from the one PC that had the issue.
I got this idea from another thread: http://forums.adobe.com/message/3219193#3219193
This thread also suggests renaming the Fax version of the printer may work as well as deleting it. Both ideas (deleting or renaming) apparantly worked for many who had this complaint but not everyone. -
i have a color management problem. I have OS X v 10.5, Adobe Photoshop Elements 6, and an Epson Stylus Photo R800. I want to print images I have scanned on a Epson Perfection 1660 Photo and corrected in Photoshop and get the colors accurate.
I used the ColorSync utility to verify, and it came back with this report:
/Library/Printers/EPSON/InkjetPrinter/PrintingModule/SPR800_Core.plugin/Contents /Resources/ICCProfiles/SPR800 Standard.icc
Tag 'dmnd': Tag size is not correct.
/Library/Application Support/Adobe/Color/Profiles/Recommended/CoatedFOGRA27.icc
Tag 'desc': Tag size is not correct.
/Library/Printers/EPSON/InkjetPrinter/ICCProfiles/Standard.profiles/Contents/Res ources/Epson IJ Printer.icc
Tag 'dmnd': Tag size is not correct.
/Library/Printers/EPSON/InkjetPrinter/PrintingModule/SPR800_Core.plugin/Contents /Resources/
I did not know what to do next. At the bottom of the window it said to go to www.apple.com/colorsync to find a tutorial. I got a message saying that link does not work. Tried to find the tutorial by searching at apple.com, but could not seem to locate it. Does anyone know what the report above means and what I should do about it?
Also, how to find that tutorial?
Re Using RGB all the way through, When I print from Photoshop Elements, I select Adobe RGB, Photoshop Manages under "Color Handling", Relative Colometric under "Intent" and "ColorSync" i the Epson printer box. Do you mean to do something different in this sequence? -
On 3/19/13 I was printing photos on my Epson R1800 printer using Adobe Photoshop Elements 11 with no problems. I got an automatic Apple OS X software update which I installed. Ever since, when I try to print photos my iMac crashes. How can I unistall the OS X update?
What you are experiencing is called a Kernel Panic and is NOT caused by the OS, they can be difficult to troubleshoot as they can be software or hardware relate. The X Labs writes and excellent article about them, in Kernel Panics. Please read it carefully. In order to troubleshoot your KP you need to post your last KP log, Apple provides instructions for doing so in How to log a kernel panic. Please follow the instructions in that article and post your complete KP report.
As mentioned previously it is NOT caused by OS X! There are common causes, including RAM issues, outdated applications, hard disks failing etc. By posting your KP log we can look at it and determine if it's software and if it is then point you to what is causing the issue. -
Add printer profile to Adobe Photoshop Elements 7.0
Hi
I have Adobe Photoshop Elements 7.0 running on a Windows/7 64 bit system. I print to an epson 1400.
I wish to print a photo from the PSE editor. Unfortunately the editor does not allow me to choose the appropriate printer profile for the epson 1400 & the paper I have loaded.
The profiles are correctly installed in C:\Windows\System32\spool\drivers\color; and they are available to other programs, like MS Photo Viewer. But PSE editor does not display them as a choice.
PSE 7.03 does allows me to specify a printer profile. After pressing control-P I am presented with a PRINT dialog box. Among other things, I choose:
Color Handling: Photoshop Elements Manages Colors
Printer Profile: presents many options, including:
- working RGB - Adobe RGB (1998)
- working CMYK - U.S. Web Coasted ....
- working Gray
- and many others,
but no Epson profiles.
For Epson Premium Photo Paper Glossy I want to use the SP1400 1410 PGPS profile provided by epson.
Does anyone know how to get PSE 7.03 to allow this choice?
thanks
JohnColin
Thanks again for the helpful reply.
I have not previously calibrated my monitor. I am looking at that now. but
have avoided it because:
1. Adobe recommends (http://kb2.adobe.com/cps/333/333356.html) that LCD
displays not be calibrated.
2. The colors on my Dell 2007WFP are the same as on the back display of
my Nikon D80 within my ability to differentiate. And they are good!
3. The colors produced by the Epson 1400 were way off for some skin
tones (specifically brown skinned people - about half of the folk who I
photograph). This was not a minor adjustment issue. And sometimes they
were off in the Green direction, other times they looked red or orange, more
in shadows than in highlights.
4. The skin tones printed from Picasa were very good (short of excellent)
while the skin tones from PSE 7.03 were completely inferior - I did not
suspect a problem with the monitor calibration or the printer - PSE was at
fault.
Ok, now I used the calibration tool that seems to be part of Win/7 - I got
to it via the control panel:display. I made no adjustments to the monitor -
it seemed fine.
I would like the printer to duplicate what I see on the monitor. prints are
a bit lighter than what I see on the screen.
I am printing now with the following parameters:
1. from PSE Editor
2. Photoshop Manages color
3. Printer Preferences
1. Premium Photo Paper Glossy (I use epson paper & inks)
2. Color Management: ICM & No Color Adjustment
4. Printer Profile: SP1400 1410 PGPP (thanks!)
5. Rendering: Relative Colourimetric
John Kinne -
Regarding installing Adobe Photoshop Elements 11 from internet...how ?
I don't have a cd compartment to download from disk
thnxDownloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.5 (win), 5.5 (mac) | 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
Adobe Photoshop Elements 9 has stopped working... how can I make it work?
Hi. I have just bought a new copy of Photoshop Element 9. It installed OK, but when I try to open the Editor, I get the message "Adobe Photoshop Elements 9 has stopped working. Windows is checking for a solution to the problem", followed shortly by the message "Adobe Photoshop Elements 9 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available". The only option then is Close Program. The Organizer has the same problem.
Does anyone know how to get it to work? It hasn't just stopped working, it has never worked at all. If anyone at Adobe are monitoring this thread, please can you tell me what the problem is and how to sort it out? I tried the Adobe call-back service but all I got was a computer phoning me up, and no person available.
KarenHi,
Please try couple of probable solutions as mentioned below:
Solution 1:
1. Close Elements.
2. Launch the Photoshop Elements Welcome Screen and hold down ctrl + alt + shift as you click Editor.
3. Continue to hold the keys until you see a message box asking if you want to delete Photoshop Elements settings file; click Yes. Elements will open with default preferences.
Solution 2: In case any network printer is attached try to launch without network or printer uninstall or make different printer as default.
Solution 3: Try launching with anti-virus off or removing PSE from conflicting list.
Solution 4:
On the drive on which you have installed PSE,on my machine it is on C:
Go to C:\Program Files\Adobe\Photoshop Elements 10\Locales\<locale>\Plug-Ins\Import-Exportand you will find twain plug-in. Remove that plug-in from that location and copy it somewhere else.
Now launch PSE and check if it works.
For related post for Twain please see this:http://forums.adobe.com/message/2954743#2954743 -
PC running Windows 7 with Photoshop Elements 7 printing to an EPSON Stylus PHOTO R1800
Please help! I am an amateur photographer. This printer produced excellent photos until my old PC died. I just bought a new Dell XPS 9000 with Adobe Photoshop Elements 7 and connected my printer. The photos look terrible. Clearly, the PC and Printer are not working together properly (syncronized COLOR wise). To consistently obtain the best, life-like colors in my pictures, what do I need to do? WHICH (Photoshop Elements or the Epson) should manage the color, and what settings should I use? Each has a setting to allow the other to control the color. Which will produce the best photos? I have tried many different combinations of settings without success. All of my photos come out brownish yellow. I am feeling desperate. I am an older,retired person with a limited understanding of computers, so I need simple,detailed,step-by-step instructions on how to correct this problem. Thank you.
This might be helpful.
http://www.youtube.com/watch?v=tzozX9kyCPc
http://www.photokaboom.com/photography/learn/printing/1_set_up_PSE_for_printing.htm
http://photo.net/digital-darkroom-forum/00Rnws
-garry -
Photomerge Adobe Photoshop Elements 7.0 (Editor) has stopped working
When starting photomerge I'm getting the above error message.
I un installed PSE 7.0 and re installed. Same problem.
Any ideas what could cause this problem.
Only change I saw was that Google Chrome was installed.Hi,
Please try couple of probable solutions as mentioned below:
Solution 1:
1. Close Elements.
2. Launch the Photoshop Elements Welcome Screen and hold down ctrl + alt + shift as you click Editor.
3. Continue to hold the keys until you see a message box asking if you want to delete Photoshop Elements settings file; click Yes. Elements will open with default preferences.
Solution 2: In case any network printer is attached try to launch without network or printer uninstall or make different printer as default.
Solution 3: Try launching with anti-virus off or removing PSE from conflicting list.
Solution 4:
On the drive on which you have installed PSE,on my machine it is on C:
Go to C:\Program Files\Adobe\Photoshop Elements 6\Locales\<locale>\Plug-Ins\Import-Exportand you will find twain plug-in. Remove that plug-in from that location and copy it somewhere else.
Now launch PSE and check if it works. -
Photoshop elements 5 printing photos
When printing in Adobe photoshop elements 5 with windows xp, SOME of the photos show horizontal blaack lines in various locations. If these lines appear in the print preview final screen, they print on the photo. I have spent 4 hours online with HP to determine it is NOT a printer problem.
Some photos print well and others show the lines. ANy advice?Having a nearly identical problem here. Just bought a new computer, which upgraded me from XP to Win 7, and at the same time I upgraded to Photoshop Elements 9. I restored my Photoshop Elements backup, but found a majority of my photos had become disconnected due to a change in the folder hierarchy from XP to Win 7. Many of my photos when I was using XP were in C:\documents and settings\..., but in Windows 7 there is no documents and settings folder under C:, and Windows won't even let me create a folder with that name so as to move the photos back into it. So now all my photos are in C:\Users\My Pictures\... and PSE can't seem to find them. I have to browse on each one to manually reconnect it. Very tedious and no way that is going to work for nearly 10,000 photos in my catalog. What's worse, the program freezes after I perform a half-dozen or so reconnects. I've tried uninstalling and reinstalling the program, and also the suggestion on the Adobe tech note (http://kb2.adobe.com/cps/400/kb400848.html) and neither seems to abate the freezing issue. I've also tried both restore options (restore to same location and restore to new location/preserve folder layout) and the folder hierarchy is still messed up either way. Any suggestions?
-
Photoshop Elements 9 prints and Previews are blank
Recently installed Elements (not the trial, the paid version) on a new MacBook Pro, and it not only won't print, the Print Preview is blank. Wondering if it was the document, so I created a new document with Elements, painted a few strokes, and tried printing again. Same result. The Print Preview is blank. The thumbnail of the image DOES show up in the Print dialog box. I re-installed the software. I deleted and re-installed the printer. I restarted the computer. All other apps are able to print, and Preview app is able to print the same documents that Elements will not print. I've been doing IT for years, and I've never seen anything like this. Any suggestions?
I may have just found a solution. In the print dialog box, under more options, colour management...if i leave the Colour Handling to Photoshop and change Printer Profile to Apple RGB or to my Printer colour profile then I could print. However, colour is off although it looked nice in print preview. So, instead I downloaded ICC Colour Profile for Mac from adobe and change back the Printer Profile to Adobe RGB(1998) which is same as above Image Space profile.
And I am quite satisfied with the print output.
Begin forwarded message:
From: Alina Hashim <[email protected]>
Date: May 11, 2011 8:25:20 AM GMT+04:00
To: [email protected]
Subject: Re: Photoshop Elements 9 prints and Previews are blank
Yes, sorry for the confusion. Normally i go to the web link to post message but it didn't work this time, so i replied directly from email and that seem to be ok.
Anyway, my printer is Canon MG5240. After reading your thread, I installed updated driver from Apple (printer driver for Mac) and when still cannot print, I called a canon rep here and asked about it and he said to go into canon website only. So I loaded driver from Canon website which also didn't seem to change anything. When I was using Elements 9 trial version i did not have problem printing from the software.
Maybe you are looking for
-
My default home page does not come up and my navigation bar is grayed out. I can't seem to fix it.
In the last few days, I have noticed that when I open my browser, I don't get my default home page, even though it shows under my options. When I conduct a search, I have navigation buttons, but once I open a page from the search engine results page,
-
How do I get my router to work with my new modem?
Since the mods deleted my other post, so no one could see it and think anything bad about linksys's customer service, I will just have to ask a dumb noob question. I am not an IT professional, I am just a regular, non-technical kind of guy. I tried t
-
Essbase 64 bit on Windows 2003 Server: Windows Virtual cache/ Paging File ?
Hi, the speed of our nightly calculations seems to differ from day to day between 1 and 2 hours I am wondering, what the correct setting for the windows paging file is ? We use Windows 2003 64 Bit Server with 16 GB RAM We run 1 Essbase application wi
-
Message no FH017 Open item management only allowed for balance sheet accounts
Dear All, i try to change one Balance Sheet account to P&L Account. However i failed changing the account. it pops up the error Message no FH017. For this error, i have already untick the Open Item Management Can anyone help me on this? Very apprecia
-
How to Prepare FD for a Periodic Billing report
Hello Gurus, I need to create a FD for Periodic Billing report. could anyone of you help me to prepare it? My Basic doubts are: how do i know what are the characteristics, KFs,Mp etc should i use in creating? While discussing regarding requirement