Adobe plugin not detected
Hello,
I downloaded an ebook that I do not arrive has to open with adobe reader.
It is a secure ebook. It is has to say, that it is necessary to download a software, to put the key in this software and after the PDF opens with adobe reader.
Voila the software which allows to open the ebook:
Http: // www.begaiement.ch / telechargement-se.htm
Every time I have this message:
http://nsa07.casimages.com/img/2009/08/30/090830065647334844.jpg
I have the version 9 of adobe reader. To open the other ebook, I have nobody concerns(marigolds).
PS: I am French and I used a translator to translate this text:)
Thank you in advance.
I would recommend that open a formal support case, as working with Protected Mode is quite complex.
Similar Messages
-
Adobe Plugin not working in Protected mode
We have an adobe plugin for our application. The plugin creates a toolbar button in Adobe and on clicking this button, it invokes one of the form from our application to save the document record for the PDF file in the database. The plugin was working fine till Adobe 9. It stopped working in Adobe X with proctected mode ON. However, if we turn off Protected mdoe, it works fine.
I did some research and found that we need to modify the policy rules by creating ProtectedModeWhitelistConfig.txt file and appropriate registry for it. I did those steps and now I am not getting "Access denied" error when protected mode is ON but the plugin is still not working. On further debug, I found that it fails while trying to connect to SQL Server. It gives error "SSL Security Error". This is working perfectly fine without protected mode.
Can anyone let me know what are we missing here?You may get more answers if you post in http://forums.adobe.com/community/acrobat/acrobat_sdk
-
Adobe Plugin not able to access COM object in Protected mode
We have an adobe plugin for our application. The plugin creates a toolbar button in Adobe and on clicking this button, it invokes one of the form from our application to save the document record for the PDF file in the database. The plugin was working fine till Adobe 9. It stopped working in Adobe X with proctected mode ON. However, if we turn off Protected mdoe, it works fine.
I did some research and found that we need to modify the policy rules by creating ProtectedModeWhitelistConfig.txt file and appropriate registry for it. I did those steps and now I am not getting "Access denied" error when protected mode is ON but the plugin is still not working. On further debug, I found that it fails while trying to connect to SQL Server. It gives error "SSL Security Error". This is working perfectly fine without protected mode. Also It is not able to access COM objects. I guess both these things might be related.
Can anyone let me know what are we missing here?I would recommend that open a formal support case, as working with Protected Mode is quite complex.
-
Adobe Updater not detecting security updates
Adobe Updater is not detecting the security updates released yesterday for Illustrator and Photoshop CS5 and 5.5.
Hi Sharpo,
Security updates are not designed to be available via AAM. It is available only via a patcher that has to be run manually).
1. APSB12-10 – Security update available for Adobe Illustrator : http://www.adobe.com/support/security/bulletins/apsb12-10.html
2. APSB12-11 – Security update available for Adobe Photoshop : http://www.adobe.com/support/security/bulletins/apsb12-11.html
Hope that helps! -
Adobe Revel not detecting changes to my catalogue
When I sign in to Adobe Revel via Elements 12 it says it is detecting changes but then does nothing; no sync'ing symbol or anything. Any ideas?
Hi,
Yes I did that when it wouldn't sync and it all got uploaded. My iPad photos sync fine so I'm thinking it may be my pc. Macafee maybe?
Sent from my iPad -
Adobe creative cloud desktop is not detecting my internet connection?
adobe creative cloud desktop is not detecting my internet connection?
i connected with the adobe people through 'contact an agent'.
very helpful, they remote managed my desktop to fix the issue.
apparently something to do with permissions not activated for adobe, not sure how and why this happens though, or why it was fine earlier and suddenly stoppped.
they insisted it was to do with being on a wifi connection but that's not possible because i have my laptop right next to my desktop and that was working fine.
it took about four hours to fix though, so be patient! -
[locked] adobe flash player plugin not working in FFox 3.6.8
I run Windows XP Home fully auto-updated, have IE8+ latest FFox browser 3.6.8, and have installed (as Admin) your Shockwave Flash Player
and plugin Ver. 10.1.53.64. FFox Plugin Check says "Up to date". At least 10 times per day, I get a Javascript alert of "script error" when I try
to view Flash Content. I have thoroughly researched this prob on your site, but find no answer to my prob, hence this thread.
Please tell me:
1. How to fix this, and
2. Why I should not COMPLETELY block ALL Flash content with freeware tools.
It would be a pity, because I have 5 MILLION hits on my YouTube (and other .flv/swf- hosted vidsites).... but I have no option now but to consider
your latest update unusable and incompatible with my Firefox-secured sys. I did sucessfully dodge your slyly unethical attempt to default-install
McAfee junkware, as I am responsible for securing quite a few computers in my law firm. I use and regularly update & scan w/:
AVG Antivirus, Spybot S&D+Teatimer resident, and the free Zonealarm firewall. I have updated my Java and Javascriptscript and always keep
Javascript turned on. I also run SpywareBlaster and occasional free Kaspersky, Panda, and F-secure Virusscans. I am virus/spyware free.
I wrote my first line of code in 1968.
The only problem I and my users have is with YOUR Flash product updates/plugins in FFox, crashing and generating a Javascript errmsg.
You have even completely locke up my computer, which NEVER happens to me unless gates does it. I fear I have fallen for the old trick of
getting v. 1 of an existing ware, to be patched later, in the evil M$oft way. If your products only work with M$oft OS's and browsers,
you are violating the well-known Google Success maxim of "don't be evil!" And the common-sense rule that content-delivery Netware
should be Browser- independent. I know you code mostly for intrusive-adware, and have allowed for that. But I am getting VERY tired of seeing
a Javascrpt errmsg and the words on my FFox browser "The Adobe plug-in has crashed. Send crash report"- which I always do.
I know Open Source wares are pressing you hard, but yes, the .PDF Reader WAS designed to be the first common format other than ASCII.
You are falling far short of user-acceptance comapared to days past. Your products are WAY overpriced bloatware. PLEASE don't be the
Bill Gates of served-out pictorial content, where "it's ALL proprietary". That will kill your sales and inspire freeware-writers more than you can
believe. If you fail to fix this bug speedily in your freeware, you will suffer the Fate of Vista. I NEVER buy into a ver.1.0, but you have forced me to,
and it doesn't work. Fix it- put out a hotfix or patch, or the WHOLE OPEN SOURCE/SHAREWARE Community of Users like me will not even
CONSIDER buying your products. I write for your benefit, not mine. .PDF and Word/.wmv files are NEEDED by users. DON'T BE EVIL!
HELP me! I've already installed OpenOffice and my next sys's OS will be a flavor of UNIX.. You do business in the WRONG way for 2010-users!
Or are you copying the outdated, universally hated-by-pros M$oft business-model? In less than a decade of Internet time, there won't even BE a
Microsoft- except for those who are complete Net-Noobs and can be victimized easily. IE8 is a constantly-patched virus magnet. Please
DO NOT go down that road.....for your own good.
The De-CrasherUhhh, whatever, ednob. Take offense at whatever you want to- it's your constitutional Right.
Yes, it's pretty hard to make all these deep-rooted proggies work together. But I think that's the Coder's job to anticipate, not mine.
All the secuityware I use is pretty popular. AND-
I'm too busy in the courtroom to spend much time as a TOTAL what's-new $product$ nerd.
I JUST EXPECT MY SYS TO WORK. AND IT IS OBVIOUS THAT ADOBE PLUGIN UPDATE TRIGGERED THE SEVERE PROBLEM
This answer is that I'd just like my sys to be able to access my weather site Intellicast.com , which my NEW! BETTER! Flash 10
installation just froze hands-down in the best, latest, most secure browser- FFox. For 15 minutes. That's all I have for you.
Adios! You can go away now. I billmy tim at $200/hr and have lectured by invitation to NASA, DECUS and a whole lot of other folks.
Been using the Net since 1991- when you HAD to learn UNIX.
=======================================================================================
For the man who really tried to HELP me, Syncwulf, here is some error-data I could capture- even with a frozen browser
I had to kill with Task Manager.
The message the INTELLICAST SITE reported to me was
ADOBE FLASH ERROR V. 10
Error: Error #2058: There was an error decompressing the data.
at flash.utils::ByteArray/_uncompress()
at flash.utils::ByteArray/uncompress()
at MethodInfo-1()
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at flash.net::URLLoader/onComplete()
And naturally it froze before I could even send off a Crash Report to help Adobe.
Too bad for that other window I had open to a client, eh? Had to end the whole FFox run, all tabs.
All help appreciated, but all snotty lectures from guys who were wetting their diapers when I was using
Princeton's IBM 360/91 in 1969 to program in ALGOL 60 will be ignored.
Thanks, SYNCWULF! Your reply arrived at the speed of electrons thru copper = 9 inches per nanosecond.
- The DeCrasher -
i can not re install Adobe Acrobat 7.0 professional on my computer. It is saying a qualifying product is not detected. I cant even get through using the customer service line they provide 800-272-3623. This is the worst interactionI have ever had with a company.
Hi joej49728017,
I am so sorry for the inconvenience caused. However this is just because Adobe Acrobat 7.0 is an outdated version & the now the activation server for it does not exist.
Please refer to the following KB doc. Error: "Activation Server Unavailable" | CS2, Acrobat 7, Audition 3
The above link will help you to install a special version that does not require activation.
In case you further need any help, please let us know. We will be more than happy to help you.
Regards,
Aadesh -
Unable to install adobe connect add-in --- And add-in not detected
In the Adobe Meeting connection test, it tells me that the add-in couldn't be installed on the harddrive, I should check the available HD again. So I installed the add-in manually and rebooted. This is not detected by the Meeting Connection test however... Any ideas? - Thanks in advance!
Hi Stefan,
There could be multiple issues. Please call Adobe helpdesk toll-free number 800-422-3623.
Thanks,
Annkiit -
"Adobe Captivate could not detect a recording device ..."
Adobe Captivate shows my Snowflake USB microphone but doesn't record sound from it. When I choose Calibrate I get "Adobe Captivate could not detect a recording device". However, I can record from the microphone in all my other apps (Rosetta Stone, Sony SoundForge, etc.), so I know it's not a hardware issue.
When I go to "Sound" in Vista Pro's "Sound" option on control panel the Microphone is chosen as the default recording device, and I see the bars moving up and down when I talk.
What can I do to get "Captivate" to see the Mic?
A temporary workaround I found is to plug the Microphone into my laptop, then select SPDIF in as the input source. Captivate still gives the "... could not detect a recording device..." error, but the sound records anyway. This is kludgy, however.Hi there
You may well just be out of luck. I heard Captivate 2 and Vista Pro used together. I don't believe Captivate was fully compliant with Vista until version 3. So that may explain things.
Unless someone pops in with a better idea, you should be able to record the audio separately, save as WAV or MP3 and import into your slides.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks -
I have Adobe flash player version 10.2.152.32 installed and Adobe has released version 10.2.3.1 so why is the add-ons manager not detecting that an update is available?
Adobe Flash is not an add-on, it's a plug-in and you have to use the Plug-in Check to check for updates:
https://www.mozilla.com/en-US/plugincheck/ -
Adobe Flash 11.1.102.63 not detected with April 2012 PRU
We have recently updated Adobe Flash to version 11.1.102.63 in our ZENworks 10.3.3 zone. I downloaded and applied the April 2012 PRU and it is still not detecting after an inventory. Is there a fix or easy workaround?
Thanks.Originally Posted by pcwoodring
We have recently updated Adobe Flash to version 11.1.102.63 in our ZENworks 10.3.3 zone. I downloaded and applied the April 2012 PRU and it is still not detecting after an inventory. Is there a fix or easy workaround?
Thanks.
All - it magically worked during the weekly scheduled inventory run. Perhaps some database updates hadn't taken place yet. -
Adobe Digital Editions does not detect my e-reader
Can anyone help please? My Adobe Digital Editions does not detect my Sony e-reader and does not appear in my bookshelves. My laptop detects the device without any issues but Adobe does not - I have re-installed twice but still the same.
Re-installing is not the answer. Most likely, the issue is either the
sequence of events that you go through, whether the SONY ereader is
supported and whether it is registered properly. Let me go through these in
reverse order. I am assuming (dangerous) that the SONY is 'new to you'. If
not, then please accept my apologies.
You start with making sure that the SONY ereader is supported by Adobe
Digital Editions (ADE from now on). Check the list of supported devices
HERE <http://blogs.adobe.com/digitalpublishing/supported-devices>. If it
is, then you know that the rest of the process should work.
Next, attach the ereader to your computer. Let's assume a Windows
machine: plug it into a USB port and wait for Windows to recognise it and
tell you your hardware is ready to use. If you've done this before, check
that Windows has added your ereader as a device by going to My Computer and
looking at the disk drives. Your ereader should show up. Then, if you
haven't registered the ereader with SONY, you should go to their website.
It will look for attached ereaders and confirm that it finds yours.
Register it with SONY, using your Adobe ID and password. SONY will then
write a small record onto the ereader, which ADE needs to see. Close the
SONY website.
Next, bring up ADE. If all is well, ADE will recognise your ereader and it
will show up on your bookshelf. If there's a problem with the ereader, ADE
will tell you that, and we can go from there.
If all is well, you can transfer your ebooks via drag and drop. When you're
done, close ADE, but don't disconnect your SONY until it tells you it's
finished updating itself. THEN eject it via My Computer or the small icon
in the system tray at the bottom right of the screen.
Hope this helps!
================== -
I created one adobe plugins to work from Adobe Reader/Acrobat using Adobe Acrobat SDK and that was built on .net 3.5 version. On conversion of .net framework version from v3.5 to v4.5, we are now getting error while the Adobe Reader/Acrobat is starting and plugins are not working. While making the log we found following exception:
System.IO.FileLoadException: Could not load file or assembly 'System.ServiceModel.Internals, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. Unspecified error (Exception from HRESULT: 0x80004005 (E_FAIL))
File name: 'System.ServiceModel.Internals, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'
at System.ServiceModel.Channels.Binding.set_ReceiveTimeout(TimeSpan value)
at MyClass.Connect()
=== Pre-bind state information ===
LOG: User = domainname\username
LOG: DisplayName = System.ServiceModel.Internals, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
(Fully-specified)
LOG: Appbase = file:///C:/Program Files (x86)/Adobe/Reader 11.0/Reader/
LOG: Initial PrivatePath = NULL
Calling assembly : System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089.
===
LOG: This bind starts in default load context.
LOG: No application configuration file found.
LOG: Using host configuration file:
LOG: Using machine configuration file from C:\Windows\Microsoft.NET\Framework\v4.0.30319\config\machine.config.
LOG: Binding succeeds. Returns assembly from C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel.Internals\v4.0_4.0.0.0__31 bf3856ad364e35\System.ServiceModel.Internals.dll.
LOG: Assembly is loaded in default load context.
The C# code is written as follows:
EndpointAddress endpoint = new EndpointAddress("net.pipe://localhost/MyApp/");
NetNamedPipeBinding binding = new NetNamedPipeBinding(NetNamedPipeSecurityMode.None);
binding.ReceiveTimeout = TimeSpan.MaxValue;
IAcroServer cserver = ChannelFactory<IAcroServer>.CreateChannel(binding, endpoint);
Can anyone help me to find the reason and resolution of the problem I am facing. Thanks in advance.Yes plugin is written using C++ and that plugin is connecting with MyApp. Previously the plugin was working fine while the connection WCF service was in .net version 3.5 but on change of .net version to v4.5 is throwing the exception. This wcf service developed on C#.
-
Canon XH-A1s not detected by Adobe OnLocation CS5
Hi All,
I recently purchased the Canon XH-A1s HDV Camcorder.
I've hooked the camera up the my 2011 MacBook Pro (8GB RAM, Quad Core i7 Processor) and am wanting to use Adobe OnLocation to record monitor footage as it is shot.
However, when I open Adobe OnLocation the camera is not detected and I just get the standard "No Video Input Available".
I've had a look at the Mac OS X System Profiler, under the FireWire section and the Camera is detected fine, so I know there isn't a problem with the FireWire 800 cable.
My current steps are as follows:
With camera turned off connect FireWire cable from the Camera to the MacBook Pro.
Open Adobe OnLocation.
Create a new project.
Turn the camera on.
Does anyone have any thoughts? Am I doing anything wrong/not doing something?
All help is greatley appreciate.
Thanks,
OliverI've managed to get Adobe OnLocation to detect the XH-A1.
OnLocation does not automatically detect the camera when in Manual mode, or any of the other preset modes for that matter.
The camera needs to be set to the very first option (before the VCR mode - I forget it's name).
Oliver
Maybe you are looking for
-
My iPhone 4S is only playing part of a song and then stops, sometimes plays whole song but for the most part it just stops randomly
-
Hi All, I need to transfer bulk data from terdata to Mssql Pls suggest some KM can i use • LKM SQL to MSSQL (BULK) • KM MSSQL Incremental Update Any suggestion
-
Hi folks, I really need help to solve an urgent issue. The context We are about to deliver an e-learning course made essentially with captivate lessons. The content is accessed through an html Main Menu which in turn is nested in a frameset. The reas
-
Delivery Date Time spot contains unformated value in PO in Auto PO creation
Hi Experts, We have created a program that fetches the recent changes done in Purchase Requisition documents given as input and updates the corresponding Purchase Order document created from those PRs accordingly. We are using the FM BAPI_PO_CHANGE f
-
ACE WAF nCipher implementation
Hello guys, I need store private keys for encryption private keys saved on HDD on HW keystore. After reading Cisco doc it's not clear for me. Can Anybody explain it for me? I have 3 WAF appliances: - 1x management (ACE-WAF-MGT-LICFX license) - 2x fw