Adobe Premier cc7.2 hang during editing

Windows 7 Premier cc 7.2 and BMD Intensity Shuttle card 4 GB RAM during editing Premier hang what problem pl. help.

Hi Bill
Open the program and click Edit >>Preferences >>Scratch Disks
This should show the amount of spare memory for performing tasks.
If low you could add more disk space e.g. an external hard drive rather than main memory.
In general the software pre-dates Windows 7 but if it will run on Vista it should perform satisfactorily on W7.
If you need any more advice I would recommend going directly to the video forum.
http://forums.adobe.com/community/premiere_elements

Similar Messages

Buying a new computer and want to also get Adobe Premier Elements 9 to video edit.

Buying a new computer and want to also get Adobe Premier Elements 9 to video edit.
What cpu/ram/video card etc do I need to get to ensure good performance from software eg when rendering etc.

Hi RossW57,
For the system requirements for Adobe Premiere Elements 9, see http://kb2.adobe.com/cps/863/cpsid_86324.html#main_System%20Requirements
If you are planning to upgrade to Adobe Premiere Elements 10, use the doc http://www.adobe.com/products/premiere-elements/tech-specs.html
Thanks,
Preran

When will adobe premier pro be able to edit h265

When will adobe premier pro be able to edit h265

There's been no announcement on this. You should let Adobe know you want them to work on it.
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Adobe Premier and Dreamweaver Hanging Up

I'm running an 8 core i7 process with a RAID Zero and to other solid state drives with 24 gigs ram and NVIDIA GeForce GTX 680 on windows 7 64bit and for some reason I'm experience more and more hang ups, locking up when using Premier and Dreamweaver. There are some serious performance issues with Adobe CC. I'm running very powerful machines and I do not expect these constant crashes and hang ups. Working with fluid grid layouts in Dreamweaver is a nightmare. I take about a minute to three minutes for a web page to wake up after opening it in Dreamweaver to work on it. This totally destroys the possibility of a smooth workflow. Same thing in Premier, I'll be editing a project and suddenly the software goes white and then premier says it's low on resource or something and sometimes it will not totally crash and other times it will totally crash. It's hard to take time out to explain this to you people, as your customer for almost two decades I'M SICK OF BEING YOUR BETA TESTER AND HAVING TO PAY FOR YOUR PRODUCTS

reset your preferences -
acrobat: http://help.adobe.com/en_US/acrobat/X/pro/using/WS58a04a822e3e50102bd615109794195ff-7feb.w .html
adobe media encoder: https://forums.adobe.com/thread/1713540
after effects: http://helpx.adobe.com/after-effects/using/preferences.html
dreamweaver: https://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs6-cc.html
flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html
illustrator: http://helpx.adobe.com/illustrator/using/setting-preferences.html
indesign: https://forums.adobe.com/thread/526990
lightroom: https://helpx.adobe.com/lightroom/help/setting-preferences-lightroom.html
muse (mac): https://forums.adobe.com/thread/1246022?tstart=0
photoshop: https://forums.adobe.com/thread/375776
photoshop elements: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html, http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm
premiere elements: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html
premiere pro: http://www.mediacollege.com/adobe/premiere/pro/troubleshooter/trash-preferences.html
if that fails, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall

Importing an Avid 6 edited film in .MOV into Adobe Premier CS6 for re-editing but codec issues!

Hello,
My first time using Adobe Premier CS6.
I have edited a film on Avid 6 but it's far too big.
I want to import this film into Adobe Premier CS6 for re editing so I can export it as a H.264 and make it small enough to post online (currently it's 9gb)
I have tried importing it but I'm running into CODEC issues eeven though it's a .mov. What can I do?
Please help, it's all new to me.
Cheers,
S

More information needed for someone to help... please click below and provide the requested information
-PPro Information FAQ http://forums.adobe.com/message/4200840
What version of quicktime do you have installed?
Exactly what is inside that MOV wrapper?
Codec & Format information, read both links in reply #1 http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
For Mac http://mediainspector.massanti.com/

Adobe Premier Pro - Getting Started

Hi There i am new to Adobe and Adobe Premier Pro - I want to edit GoPro videos, i have Adobe Creative Cloud and i have installed Premiere Pro CS6, where do i find the software so that i can start editing, the only thing on my desktop is Adobe Creative Cloud?

It is Windows 7 -
The only new software that is part of the Start menu are
Adobe Reader Xi
and
Adobe Creative Cloud

ADOBE PREMIER ELEMENTS 7 Starts OK but Crashes during Editing

This program lets me open and import up to 30 small Video clips ,while editing it's about this stage that it displays the following warning box :- ADOBE PREMIER ELEMENTS IS RUNNING LOW ON SYSTEM MEMORY. PLEASE SAVE YOUR PROJECT & PROCEED WITH CAUTIION........OK (button).
My computer is a HP ELITE PAVILION with 4 gb. of system memory , I have taken it for granted that this should be adequate for this type of program.... is this correct or there something else wrong ??
The program case has a note that it is for Win.XP or Vista & I am using Win.7 is it posible that it might nead a patch to make it better ??
I would appreciate if someone could ASAP be of a help to me....All the best....Bill Ellis

Hi Bill
Open the program and click Edit >>Preferences >>Scratch Disks
This should show the amount of spare memory for performing tasks.
If low you could add more disk space e.g. an external hard drive rather than main memory.
In general the software pre-dates Windows 7 but if it will run on Vista it should perform satisfactorily on W7.
If you need any more advice I would recommend going directly to the video forum.
http://forums.adobe.com/community/premiere_elements

QuickTime 7.5 Causing Adobe Premier Hang?

I am experiencing problems using Adobe Premier Elements 4.0. While creating projects in Premier and when previewing a .mov file inserted into a Premier timeline Premier hangs when it reaches the .mov file and the Premier app must be restarted. This also happens while editing .mov files in a timeline. I understand from the requirements of Premier that QT must be installed in order to utilize .mov files in Premier and to export 264 so I installed QT7.5 Pro.
I went to the Adobe Premier Elements discussion forums and there are numerous complaints of the Premier app (and other Adobe apps) not running properly when updating to QT versions newer than 7.3.1. Posters in Adobe forums of course are pointing the finger at QT since their programs worked fine until the update after QT7.3.1. I have seen it mention that QT is somehow disabling some Premier drivers needed to operate properly.
Just wondering if anyone in this forum has experienced this issue or know of fix? I really don't want to change all my .mov files to another format before importing them into Premier.
Thanks!
Mike

Illustrator (CS3) works fine, so does InDesign but Photoshop crashes telling "Could not complete your request because of a program error." It worked ok before updating QT 7.5.

Converting iMovie format to a format that I can edit with Adobe Premier Pro

How can I convert iMovie format to a format that I can edit with Adobe Premier pro 7 program?

Install the free flip4mac player and you'll be able to view it.

I have some videos that are completely well shown when using any media player, but some parts of the video appear with red screens when I try to edit them on Adobe Premier. Does anyone knows the reason?

I have some videos that are completely well shown when using any media player, but some parts of the video appear with red screens when I try to edit them on Adobe Premier. Does anyone knows the reason?

More information needed for someone to help... please click below and provide the requested information
-PPro Information FAQ http://forums.adobe.com/message/4200840
Plus, EXACTLY what are you editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

Inserting line in video rather than hanging in air in adobe premier pro

I want to draw a line in a video on the last layer of the video.Like if i hv taken a video of a part of roads with vehicles runningOn it and i need to draw a line on the surface of the road.I am trying and the line which i put in the video.it used to hang inThe air with vehicles going down from under the line which i hv drawn.but i need that the line should be look like as if it attached To the roads and vehicle passing over it..which actuallyShould look as real video with line attached to the surfaceOf the road rather than hanging in the airI am very new to adobe.and trying for it and i am in urgent needOf it's solution.thanks in advance.
what i am doing is open the video from premierPro cs5 and drag that video in video 1 pane.and then press Ctrl t and put the line in the imageand save and after that drag that Sequence to video2 pane and then save..after that i click on theExport button..but the desired output of line on the last layer surface ofThe video..i know there r much steps after that like aftereffectWhich i do not know.please help me i am very newbie.please explain itTo do step by step to achieve the desired result.

Thank you for responding.
I took your advice and in the Capture window there’s an option near the bottom right that states “Capture” and below that is a button “In/Out”. I guess this is what you are talking about. So I click on the button, “In/Out” and I get a pop up the states, “Invalid time code range”. How is the average use supposed to know what this cryptic message is saying? (user unfriendly).
I see two icons that look something like brackets that is to the left of the play button. I clicked on these but nothing seems to happen. I don’t know what is going on. (user unfriendly).
Perhaps since I need just a typical You Tube video, I should purchase video capture software that is more users friendly and less intuitive. That being said, MS Movie Maker does not show the option “Capture from video device” I may try video capture software on CNET.com that is recommended and has a money back guarantee. I paid a lot of money for my Adobe Premier, but being that I am in Windows 7, perhaps it is time to retire Adobe.

I am a professional photographer of many years standing and at the moment I have a student for 12 months, who I am teaching how to use various Adobe programs, but to introduce her to video editing, I have purchased Adobe Premier Elements 13 which is less

I am a professional photographer of many years standing and at the moment I have a student for 12 months, who I am teaching how to use various Adobe programs, but to introduce her to video editing, I have purchased Adobe Premier Elements 13 which is less complicated than the Premier Pro that I use. The program works perfectly, except for one thing.... when adding a title to the short video sequence we are working with, if I use a particular font (Metallophile Sp8) which I obtained from my Adobe Typekit, it crashes the program,.... all other fonts work perfectly....can anybody help me please?

clivephoto
What computer operating system is your Premiere Elements 13 running on? And what video card/graphics card does this computer use?
From your description, can I assume that this Mettallophile Sp8 font is being recognized by Premiere Elements 13 to the extent
that it can be seen and remains seen in Titler's list of font choices - even after the crashes?
If you opened a new project, imported nothing, and created a text title in the Titler with this Mettallophile Sp8 font, does the program crash?
Please review the following which discuss fonts and Premiere Elements and determine if anything in it helps.
Fonts & Crashes with Titler
Let us start here and then decide what next.
ATR

Adobe Premier Pro CS6 editing system and mov files

We have just installed a new Adobe Premier Pro CS6 editing system with a HP 820Z (running windows 7) 18 core multi drive system. Our production company has used many mov. files from Ponds. We were a FCP 7.0 studio (still have the system) but the mov files won't import to our new CS6 System... Not trying to import from the mac...have them stored on another PC. We depend on this stock footage for production. Do I need to download a converter? I just had to produce two spots with a still background because I could not get any of our stock mov files to work...
Thanks much for any help!

PP does support direct import of Quicktime files that can be played back on the system.
What is the correct error message after import?
Can you playback the files with the Quicktime Player?
For some codecs like DNXHD you have to install the quicktime codec first...

Why does adobe premier elements render my video everytime i change something in it even when i have lots more of the video to edit? other editing software only seems to render at the start then lets you edit until your ready to save at the end. Constant

why does adobe premier elements render my video everytime i change something in it even when i have lots more of the video to edit? other editing software only seems to render at the start then lets you edit until your ready to save at the end. Constant rendering means its almost impossible to edit anything. Please help.

H TheGamer
What version of Premiere Elements and on what computer operating system is it running? It will not influence my answer but will give me information in case I need to get into version specifics to detail my answer further.
Timeline rendering is a preview matter. It does not fix anything, but it is your window of opportunity to catch of problem sooner than latter. If the Timeline rendering indicator displays orange (11 or higher) for the line above the Timeline content, that is the project telling you that you are not getting the best possible preview of the playback of that content in the Edit area monitor. And, every time you edit a file, you have altered the file from the time before. So, if you want to see the best possible for what you now have, you Timeline render. This is particularly helpful when you are dealing with titles, effects, transitions, and non native formats. You cannot turn off the Timeline render indicator system, at least none that I have ever found nor seen reported. You can do selective Timeline rendering by having the gray tabs of the Work Area Bar span only the Timeline segment that you want Timeline rendered.
Consequently, you either ignore the Timeline render indicator system, move on in the project, and take your chances in the outcome or you Timeline render to get your best possible preview if the Timeline render indicator is suggesting that you do so.
I am not approving or disapproving of this project feature, just commenting on the what is.
This is not Adobe. Rather user to user. If you want to have your voice heard at Adobe, you might consider filing an Adobe Feature Request Bug Report Form.
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
Please consider.
ATR
Add On...it is also possible to do Timeline rendering in a project, save close the project, and reopen it to find your previously "green" lined content now "orange", indicating unrendered. Yet the preview files generated originally by Timeline rendering are still existing in their hard drive save location. That is another story for other time.

Can somone please let me know what is a safe site where i can download adobe premier pro for free as i have just started editing for a community no profit tv channel.

Can someone please let me know what is a safe site where i can download adobe premier pro for free as i have just started editing for a community no profit tv channel.
Thank you...

Flash Player is free, and you might ask for help in Flash Player
This forum is about the Cloud as a delivery process, not about using individual programs... and as far as I know, Flash Player is a different, free, download
If you start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Adobe Premier cc7.2 hang during editing

Similar Messages

Maybe you are looking for