ADOBE PREMIER ELEMENTS 7 Starts OK but Crashes during Editing

This program lets me open and import up to 30 small Video clips ,while editing it's about this stage that it displays the following warning box :- ADOBE PREMIER ELEMENTS IS RUNNING LOW ON SYSTEM MEMORY. PLEASE SAVE YOUR PROJECT & PROCEED WITH CAUTIION........OK (button).
My computer is a HP ELITE PAVILION with 4 gb. of system memory , I have taken it for granted that this should be adequate for this type of program.... is this correct or there something else wrong ??
The program case has a note that it is for Win.XP or Vista & I am using Win.7 is it posible that it might nead a patch to make it better ??
I would appreciate if someone could ASAP be of a help to me....All the best....Bill Ellis

Hi Bill
Open the program and click Edit >>Preferences >>Scratch Disks
This should show the amount of spare memory for performing tasks.
If low you could add more disk space e.g. an external hard drive rather than main memory.
In general the software pre-dates Windows 7 but if it will run on Vista it should perform satisfactorily on W7.
If you need any more advice I would recommend going directly to the video forum.
http://forums.adobe.com/community/premiere_elements

Similar Messages

Adobe premier elements 11 downloaded but will not install

adobe premier elements 11 downloaded but will not install?

Hunt
What you just wrote may have revealed the Photoshop Elements Premiere Elements integration consideration. If you have Premiere Elements 11, you need Photoshop Elements 11 for the integration between the programs to produce the DVD version of the Photoshop Elements Slideshow.
All along I was picturing Meyerswalter already in Premiere Elements 11/Publish+Share/Disc/DVD and being told to install Premiere Elements to get the burn to disc accomplished.
But, if Meyerswalter is using Premiere Elements 11 and a non integrated version of Photoshop Elements for this matter, that could very well fit.
So, Meyeswalter, so that we can dispel those thoughts
a. What versions of Photoshop Elements are you using with Premiere Elements 11? And, are you in the Photoshop Elements Slideslide Show Editor using the Output of Burn to Disc DVD or Edit with Premiere Elements Editor and getting the load software message somewhere along the line?
b. To prove this point, if you have not already, what happens if you take Photoshop Elements out of the equation. Import some media into Premiere Elements 11 and try to burn to disc from there Publish+Share/Disc/DVD?
If that is the core of the issue, I will post a list of Photoshop Elements Premiere Elements integrated combos as a guideline for you.
If this is the core of the issue, you could always keep the non Photoshop Elements 11 version that you have, output the slideshow to a wmv file sized for DVD and then import that into Premiere Elements 11 via its Add Media. More on that later if necessary since right now I am speculating on an explanation for what you are encountering.
Thanks.
ATR

Install Adobe Premier Elements 9 results in Windows Installer window pop up

Installed Adobe Photoshop Elements 9 fine. When installing Adobe Premier Elements 9, the installation fails during 'Configuring Windows Installer' and a pop up window appears with the title 'Windows Installer'. What do I need to do to get this software installed?

You need at least 30GB (or better, 60GB) free defragmented space for PRE9 to work. Do you have this? You may have been on the borderline during install and your first project, so when you rendered your project, or restarted the machine, (possibly Windows creating a system restore point) your free space dropped below the limit.
Can you also confirm that you didn't install any new software between the saving and opening of your project.
Here are some general points you should work through to maximise your chances of success
Install all Windows Updates.
Install latest version of Apple QuickTime (v7.6.8 at time of writing). Even if you don't use QuickTime, PRE relies heavily on it.
Install most recent graphics and sound drivers from the manufacturers web sites.
Run Disk Cleanup.
Run Defragmenter.
Temporarily disable any anti-virus realtime scanning.
And give us some information about your clip and hardware:
Use the GSpot Codec Information Utility to analyse the file and post screen image.
What project preset did you use?
Where did the clip come from?
How did you get it into PRE?
Post back here with the necessary information described here: Got a Problem? How to Get Started

I want to download free trial of adobe premier elements 10

I have adobe premier elements 10 disc but cannot install
Suggestion to download free trial & insert serial no
Have done this but install can't be opened ?

Have done as you have stated & when I open the file to install I get this
“Install” can’t be opened. You should eject the disk image.
Have tried 4 times always the same result
I installed Premier Elements 10 approx one year ago on the same computer.
My system is 10.7.5
Alan

How do I do still digital photos on Adobe premier elements 10?

How do I edit and organize still photos on adobe premier elements 10?

You don't edit with Premiere Elements, it is for video processing. Post your question to the Photoshop Elements forum and they will help you out.
You can access the Elements Organizer 10 from both Premiere and Photoshop Elements. To get your media into the EO10 use the File menu to access the options. You can also have EO10 monitor particular folders for new media, or you can just drag your media from the Windows Explorer into EO.
Cheers,
Neale
Insanity is hereditary, you get it from your children

Adobe Premier Elements 7- crash-when burning says" Please insert a blank disk" and already a disk in

I have a Adobe Premier Elements 7. I have had a lot of problems with it of crashing and not burning.. I just had my computer wiped out and installed everything back on like windows xp service pack 3..etc. First I have Windows XP service pack 3 with an Intel Core 2CPU ,6400 @213GHz, 2.13 GHz, 1.98 GB of RAM. When I went into disk menus premier elements 7 crashes... why is that??? also I tried to burn a DVD and does the progress of burniing and almost done burning WHILE there is a dvd in the drive and says"Please insert a blank disk and click ok to burning" why doe sit do that also? I just had adobe reinstalled and my computer wiped out? Please respond and help.. I am using this program as a business of video editing and nee this solved.

Along with Steve's questions, let's talk about the process of Burning a DVD-Video.
From PrE, which is doing the authoring of the DVD-Video, the first thing that happens is a quick check of the Project and the Menu Set chosen. This happens in an instant. Next, the program must Transcode the Timeline to MPEG-2 that is fully DVD-compliant. This takes some time and is a very intensive process, stressing the computer, and also heating things up greatly. This process will often cause a poorly ventilated, or poorly cooled computer to crash with either a reboot, or a BSOD (Blue Screen of Death). Every component, save for the video card, will be stressed like few other programs can do. PrE uses a 2-pass Transcode, where it goes through the entire Timeline, and maps out sections with high motion, or great detail. It builds a "script" on how to proceed, and then goes back at the Timeline with that script, but also still looking for ways to improve things. This is about 90% of the entire Burn Disc process. Nothing has yet to be burned. Instead, files are created in the Scratch Disk folders. Now, the program takes those newly created MPEG-2 files, the Menus, and all navigation such as Markers, and assembles them into another working folder, in the full DVD structure of VIDEO_TS folder with the IFO, BUP and VOB's. When this is done, the actual physical Burn starts. This is quite a ways into the total process. It is at this point, that the program looks at the burner and the blank media, and not before.
When the program cannot get the necessary info from the burner, or the blank media, it will throw an error message, similar to yours. Also, "SenseCode Errors" usually indicate a problem with the burner, or the media.
Now, let's address this last bit. Is the firmware for your burner up to date? If not, update/flash the firmware. This will be available from your burner mfgr's. Web site. Next, what brand of blank media are you using? Verbatim and Taiyo Yuden are the most recommended brands. Memorex, TDK, newer Ritek and all store brands should be avoided at all costs. Last, is your burner a fully-certified multi-drive? If so, it should be able to handle +R, or -R media. What type are you using, and are you sure that this is blank media, and not a disc that you have already burned, or even attempted to burn?
Hope that we can stop the crashes, and get you to burning.
Good luck,
Hunt

I am a professional photographer of many years standing and at the moment I have a student for 12 months, who I am teaching how to use various Adobe programs, but to introduce her to video editing, I have purchased Adobe Premier Elements 13 which is less

I am a professional photographer of many years standing and at the moment I have a student for 12 months, who I am teaching how to use various Adobe programs, but to introduce her to video editing, I have purchased Adobe Premier Elements 13 which is less complicated than the Premier Pro that I use. The program works perfectly, except for one thing.... when adding a title to the short video sequence we are working with, if I use a particular font (Metallophile Sp8) which I obtained from my Adobe Typekit, it crashes the program,.... all other fonts work perfectly....can anybody help me please?

clivephoto
What computer operating system is your Premiere Elements 13 running on? And what video card/graphics card does this computer use?
From your description, can I assume that this Mettallophile Sp8 font is being recognized by Premiere Elements 13 to the extent
that it can be seen and remains seen in Titler's list of font choices - even after the crashes?
If you opened a new project, imported nothing, and created a text title in the Titler with this Mettallophile Sp8 font, does the program crash?
Please review the following which discuss fonts and Premiere Elements and determine if anything in it helps.
Fonts & Crashes with Titler
Let us start here and then decide what next.
ATR

I want to create a HD disc with my Adobe Premier Elements but I am getting low resolution. When I go to share the DVD to disc the form only offers 8pixels at the bottom. How do I burn this DVD in HD with higher number of pixels?

I want to create a HD disc with my Adobe Premier Elements but I am getting low resolution. When I go to share the DVD to disc the form only offers 8pixels at the bottom. How do I burn this DVD in HD with higher number of pixels? I have read other forums on burning HD DVD's but I do not see the option to turn the 8 pi into 40 pi the one forum recommended. I want my DVD to be HD so I may sell these videos online for my business. I can't sell them the low quality they are burning now. Hopefully you can help me. Thanks.

desalvom
Thank you for your reply.
You cannot burn your high resolution video that you can view on your computer to an AVCHD on DVD disc
that will replay through a regular DVD player. But players are marketed under a variety of names with
different support opportunities. One manufacturer may call its product MultiMedia Player, media player, Blu-ray player,
etc.The bottom line is the specifications for each of the players that are candidates for the playback of
the AVCHD format on DVD disc or the format of interest.
If you upload your HD (1920 x 1080) video to YouTube, YouTube converts the video to flash format, but it goes up as the HD video.
But, beware. Look at the YouTube viewing setting when your uploaded video is playing back. The YouTube default is not
HD. It might be 360p, 480p. If you have a 1080p video, then before the YouTube playback, you should be looking
at the video with the YouTube 1080p HD setting for best viewing. That is a YouTube matter.
Best results depend on you
a. setting up the Premiere Elements project preset to match the properties of the source media. That means, if
you have 1080p source, you (manually) or the project (automatically) set the project preset at
NTSC
DSLR
1080p
DSLR [email protected]
or the PAL counterpart, depending on your region need.
b. if you upload your video to YouTube using the Premiere Elements feature, there is a HD preset, but you cannot
customize it.....if you need customization, then you can export your Timeline to a file...in this example
Publish+Share
Computer
AVCHD
with Presets = MP4 H.264 1920 x 1080p30 or PAL counterpart
and then customize the preset under the Advanced Button/Video Tab of that preset. In increase quality, you might look to increase
the Bitrate under Advanced Button/Video Tab settings - without compromising the file size.
Then you would upload that file to YouTube at the YouTube web site.
All of the above are factors that need looking into in order to determine the why for what you wrote
I have published a shortened advertisement video to YouTube- say 5 minutes-
and it is low quality
Often SD video upscaled to HD can present poorly. But, you are dealing with a HD workflow so that should not be introduced into the matter. The setup of the project and
the properties of the source video are important, but let us start with the above and rule in or out those considerations first.
Thank you. As always, any clarification needed, please do not hesitate to ask.
ATR

Why does adobe premier elements render my video everytime i change something in it even when i have lots more of the video to edit? other editing software only seems to render at the start then lets you edit until your ready to save at the end. Constant

why does adobe premier elements render my video everytime i change something in it even when i have lots more of the video to edit? other editing software only seems to render at the start then lets you edit until your ready to save at the end. Constant rendering means its almost impossible to edit anything. Please help.

H TheGamer
What version of Premiere Elements and on what computer operating system is it running? It will not influence my answer but will give me information in case I need to get into version specifics to detail my answer further.
Timeline rendering is a preview matter. It does not fix anything, but it is your window of opportunity to catch of problem sooner than latter. If the Timeline rendering indicator displays orange (11 or higher) for the line above the Timeline content, that is the project telling you that you are not getting the best possible preview of the playback of that content in the Edit area monitor. And, every time you edit a file, you have altered the file from the time before. So, if you want to see the best possible for what you now have, you Timeline render. This is particularly helpful when you are dealing with titles, effects, transitions, and non native formats. You cannot turn off the Timeline render indicator system, at least none that I have ever found nor seen reported. You can do selective Timeline rendering by having the gray tabs of the Work Area Bar span only the Timeline segment that you want Timeline rendered.
Consequently, you either ignore the Timeline render indicator system, move on in the project, and take your chances in the outcome or you Timeline render to get your best possible preview if the Timeline render indicator is suggesting that you do so.
I am not approving or disapproving of this project feature, just commenting on the what is.
This is not Adobe. Rather user to user. If you want to have your voice heard at Adobe, you might consider filing an Adobe Feature Request Bug Report Form.
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
Please consider.
ATR
Add On...it is also possible to do Timeline rendering in a project, save close the project, and reopen it to find your previously "green" lined content now "orange", indicating unrendered. Yet the preview files generated originally by Timeline rendering are still existing in their hard drive save location. That is another story for other time.

Please help me!--rendering makes the images or video blurry (very pixelated) deteriorates the image Adobe Premier Elements 13 need help! .jpg and mpeg images, but I have never "rendered" before since I got APE 13 about 6 weeks ago. I am desperate for

Please help me!--rendering makes the images or video blurry (very pixelated) deteriorates the image Adobe Premier Elements 13 need help! .jpg and mpeg images, but I have never "rendered" before since I got APE 13 about 6 weeks ago. I am desperate for assistance!

That's going to be a ridiculous waste of money and energy.
First of all, the current ATI drivers don't support multiple GPUs, so at the moment even a single 4870X2 would be only a 'normal' 4870 (which is quite a speed beast already). GFX drivers evolve rapidly, so things might look different next month, but when it comes to Linux and hardware there's one Golden Rule: stay away from the newest stuff and wait for proper support to get coded.
I also wonder what power supply could possibly cope with the differences between idle and full load; that's way beyond 400W. But then, I'm one of those "quiet&green" types where >100W idle is already a bit much.
I kind of understand that you want to get it done and not worry about hardware for the next 10 years or so, but that's simply not how the hardware world works and never did. At least not for the average consumer.

Hello, I just purchase Adobe Premier elements 12. I installed it but the only problem is when I try to open "new project" it tells me I have to put my password in and username for the first seven days of installation, but when I do that the project never

Hello, I just purchase Adobe Premier elements 12. I installed it but the only problem is when I try to open "new project" it tells me I have to put my password in and username for the first seven days of installation, but when I do that the project never opens, it just has the loading bar loading and then it stops, so I have no idea wat the problem is, please help

new project help
What computer operating system is your Premiere Elements running on?
Have you gone through the typical drills of
1. Latest version of QuickTime installed on your computer with Premiere Elements?
2. Running program from User Account with Administrative Privileges as well as from Run As Administrator applied to the desktop icon
with right click of the icon, followed by selecting Run As Administrator?
3. Does problem exist with and without the antivirus and firewall(s) disabled?
4. Even though the Premiere Elements 12 Editor will not open, can you open the Elements Organizer 12?
If Yes to all of the above, please review the following for a possible solution...
ATR Premiere Elements Troubleshooting: PE12: Premiere Elements 12 Editor Will Not Open
Please review and consider the above and then we can decide what next which might include trying to open
the program directly from the .exe files. (If Windows 7, 8, or 8.1 64 bit, Local Disk C\Program Files\Adobe\
Adobe Premiere Elements 12\ and in the Adobe Premiere Elements 12 Folder are the Adobe Premiere Elements 12.exe
and Adobe Premiere Elements.exe files. Double click the Adobe Premiere Elements .exe file to try to open the project.)
We will watching for your results.
ATR

I bought download Adobe Premier elements last year. It is on my old computer which is not powerful enough. I have a new computer that is, I bought and upgrade for $69 but have got no where after several hours. what do I do

I bought download Adobe Premier elements last year. It is on my old computer which is not powerful enough. I have a new computer that is, I bought and upgrade for $69 but have got no where after several hours. what do I do?

What are you trying to do? What actions are you taking? What happens when you try?

I installed a buyed version of Adobe Photoshop Elements 13. But is not possible to start the programm. I can read "There ist a problem, the program is not able to start". Is someone able to helb me?

I installed a buyed version of Adobe Photoshop Elements 13. But is not possible to start the programm. I can read "There ist a problem, the program is not able to start". Is someone able to helb me?

Without system information and other details we can't know what might be going on.
Mylenium

Adobe premier element 9

Hello,
I have a problem with Adobe premier element 9.
I created a project with some photo and in this photo I put a little video to comment it. The project is in 1280*760.
My problem is when I want to record my project in a littler resolution (800*600), all the insert video moves out from the picture.
Do u know if there is an “option” to keep all as it was in 1280*760?
Other information: I tried to record my project in 1280*760, but it don’t work, “undefined error”…. This is an other problem…
Thanks for your help.

For what I am reading, per your desires, I would match the Project's Preset to that of your Video, in every respect.
Scale your still images to match the chosen Frame Size. This ARTICLE will give you tips and more detail.
Now, to get the Video to "come out of the stills," be sure to turn Scale to Frame Size OFF. Then, you will do a PiP (Picture in Picture), with the stills on Video Track 1, and the Video on Video Track 2, above the stills. You will then use the fixed Effect>Motion>Scale and Keyframe the Scale of the Video. You will start with a Scale of 0, so that the Video is not visible, then Keyframe the Scale to what you need, whether PiP (smaller than the stills), or full-frame. If you want the Video to "disappear" back into the still, just reverse the Keyframes.
When done, you can Export/Share to a smaller set of dimensions, with most formats/CODEC's. You will want to keep the Aspect Ratio the same, as with your Project's Preset, so a little math might be required.
If this is not what you want, please correct where I went wrong, and good luck,
Hunt

Adobe premier elements 12 will not open.

Hi
My Adobe Premier Elements 12 will not open.
It did open about 12 hours ago when I was busy working on video edits. Then I closed it, went to sleep and got up in the morning to carry on editing - bt it wont open anymore. There are no error messages coming up.
I double clicked on the icon on my desks top, as well as tried oeping it from the start menu - same responce - nothing happens.
what can the problem be ?
If I uninstall and then reinstall - will this affect any of my videos that I am editing but have not rendered or saved yet ?
thanks - I need help urgently.
LorenzoChetty

Lorenzochetty,
Welcome to the forum.
As one of the main reasons for PrE to not launch is the video driver (more on that in a moment), can you provide us with some details, please?
What OS version are you running PrE 12 on?
What is the make and model of your video card/chip (GPU)?
What is the installed version of the video driver?
Is that the latest from the nVidia, or AMD/ATI Web site?
Also, what anti-virus, anti-malware, anti-anything software are you running?
If you are on Windows, and have Windows updates set to Automatic (the default), then a simple OS Update can render the video driver obsolete.
Good luck, and let us know more please.
Hunt

ADOBE PREMIER ELEMENTS 7 Starts OK but Crashes during Editing

Similar Messages

Maybe you are looking for