Adobe Premier Pro CC 2014 closes with no error message after opening project

PC Spc:
OS:Windows 8.1 64-bit
Processor:Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz
Ram: 2x 4GB Samsung 1600MHz
GPU:NVIDIA GeForce GTX 760
please help

abradders100 wrote:
I have a PrPr project on an external GTech drive connected via USB which ran fine on my old MBP in PrPr CC 2014. When I open this project on the new MBP I cannot render or export without getting error message "Video Preview Error; Error Unknown."
If I'm reading this correctly, it sounds like the project file was created on your previous MBP, and saved to that external USB (hopefully 3.0?) drive. Is that correct? Where did you have the media, scratch, etc files located on that previous MBP? I'm wondering if Pr on the new MBP is tripping over itself trying to find other data that it might need?
Also when the Warp Stabilizer effect is applied, it generates black lines across the video in the program window. This happens when using either Mercury Playback Open CL and/or Cuda. However if I switch to Mercury Playback Software only, everything is fine but of course much slower. In addition, if I remove the effects from the sequence: Warp Stabilizer and auto colour and levels, the sequence exports fine regardless of whether Mercury Playback Open CL and/or Cuda or Software only.
What about other accelerated effects? Can you apply any of them individually without getting black lines in the program window? Further, have you tried installing the previous version of Pr CC to see if the same issues exist? You'd have to create a new Pr project, as the 2014 project files aren't backward compatible. But it might be interesting to see if you're experiencing the same problems with the older Pr.

Similar Messages

Itunes closes with an error message after installation

Right basically had the whole updater ruining my ipod problem, finally got a replacement today. Problem is when i spoke to apple tech support, for an 1 hour and 20 minutes the guy was getting me to mess about with my installation of itunes and system restores and using a few tools to get rid of traces of the program (this was before i sent it off etc), so i send it off, get it back, and my itunes will not even open now, i did happen to notice this after finishing following his advice on the phone, but was ignoring until i actually received my replacement. Basically when i start itunes, it comes up with the standard "this program has encountered an error and needs to close". i have tried uninstalling and reinstalling multiple times, different versions of itunes, going through my registry manually and deleting entries, but it still has the same error. Anyone any ideas, i really do not want to reinstall windows again thanks in advance.

I don't know if any of this will help, but the first thing I'd suggest is to get a good antispyware checker and give it a go at your system. Some recent spyware has been reported by other users to shut down iTunes or prevents it from launching. From user reports, Ewido seems to be the best at catching it. You can download a free version of Ewido here.
If that doesn't cure the problem, try deleting the iTunes preference files:
C:\Documents and Settings\<username>\Application Data\Apple Computer\iTunes\iTunes.pref
and
C:\Documents and Settings\<username>\Local Data\Application Data\Apple Computer\iTunes\iTunes.pref
You might have to turn on "show hidden files" to find them. (Right click "my computer", select open, select Tools menu -> Folder Options. Select View tab, "show hidden files" radio button is in the center scrolling panel.) Delete them. This will force iTunes to run the setup assistance the next time you run it and you'll have to go back and set any preferences you've changed from the default.
Hope this helps.

Adobe Premier pro CC 2014 - Adobe premier PRO CS6

Hi, i download the Adobe premier pro cc 2014 but i thought i wanted it be the PRO CS6 version?
I am paying for the monthly fee and i want to know how this can be rectified.

if you want to buy cs6 and not rent, you may have to contact customer service and cancel the subscription, and possibly refund the subscription if you just signed up. i doubt they will do this, but you can ask. then you can buy cs6.
Cancel your membership or subscription | Creative Cloud
Purchase Creative Suite 6
if you did want to rent cs6 you can install it from the adobe creative cloud app, filter by previous versions.
Encore CS6 not installed with Creative Cloud

Is Adobe Premier Pro CC or Adobe Premier Pro CC 2014 the newest version?

Is Adobe Premier Pro CC or Adobe Premier Pro CC 2014 the newest version? Same question applies to Media Encoder.

CC 2014. Premiere latest is 8.2.0 (65) and AME is 8.2.0.54.

I'm trying to download Premier pro and I'm getting an error message saying "There is no application set to open the url aam://SAPCode=PPRO?

I'm trying to download Premier pro and I'm getting an error message saying "There is no application set to open the url aam://SAPCode=PPRO? Does anyone know how to resolve this issue?

RiiichéC please try the process again in a different web browser or install through the Creative Cloud Desktop application. You can find details on how to install the Adobe applications included with your membership at Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.

Firefox 4.0.1 closes with no error message. When I restore the session I get: Well, this is embarrassing. Firefox is having trouble recovering your windows and tabs. This is usually caused by a recently opened web page. What can I do?

After opening certain websites, pogo, firefox 4.0.1 closes with no error message. When I restore the session I get: Well, this is embarrassing. Firefox is having trouble recovering your windows and tabs. This is usually caused by a recently opened web page.
I have had this problem before and had to reinstall an earlier version of firefox.
The error console has a long list of errors, many of them end with: does not implement nsIObserver. Is there a way to send the information on the error console to firefox support?
Redownloading Firefox 4.0 will fix my problem until I either close firefox or turn off my computer. The problem recurs when I open firefox again.

See:
* http://kb.mozillazine.org/Firefox_crashes
* https://support.mozilla.com/kb/Firefox+crashes
It is also possible that there is a problem with the files [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
Delete the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
* http://kb.mozillazine.org/Profile_folder_-_Firefox
* http://kb.mozillazine.org/sessionstore.js
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.<br />
Deleting sessionstore.js will cause App Tabs and Tab Groups to get lost, so you will have to create them again (make a note).
See:
* http://kb.mozillazine.org/Session_Restore

I'm trying to download Premier pro and I'm getting an error message saying "Error when extracting files"

I'm trying to download Premier pro and I'm getting an error message saying "Error when extracting files". I use a PC and have made the purchase of that service. What's the problem?

Hi ampsanru,
We would need some information regarding the error, could you please post a screenshot moreover your system information i.e. OS, RAM & Graphics card.
-Ankit

Adobe Premiere Pro CC 2014 compatible with Nvidia 970 GTX?

Good afternoon.
I'm an owner of a GIGABYTE Nvidia 660 GTX Ti OC 2GB. The card is detected by Adobe Premiere Pro CC 2014 (Even though,i think,it said that it's not listed or something but will work under my own risk..Is there a way to check if it's certified/supported via my own program and NOT the typical "This is the list of supported GPUs"?)
Anyways,i was thinking of buying one of the new 970GTX cards to game on better,but also to make full advantage of it's properties to do much more faster encoding/exporting (you know,create a H.264 MP4 720p@29,97FPS file) than my actual 660GTX card with Adobe Premiere Pro CC 2014.
The thing is,any owner of such card (GIGABYTE,MSI,doesn't matter) have tried to launch Adobe Premiere Pro CC 2014 and export stuff by using the GPU's full potential to make everything faster?.. Because i have this fear of "Getting the newest n greatest Nvidia card so far and in the end see/notice it'll not work with Premiere Pro CC 2014"
....Can somebody please help me with this big fear of mine,please?
Thanks in advance
DV

Locked... duplicate discussion... see GTX 970 and Premiere Pro

Adobe Premiere Pro CC 2014.2 Trial Version - Error when importing mts and mp4 video files

First time using Adobe Premiere Pro (and I'm using the trial version). When I try to import an mts video file (and tried to import an mp4 file as well), I get the error: Adobe Premiere Pro CC 2014.2 has stopped working. And then the program crashes. Please help.
My computer specs: Windows 7 with Service Pack 1,Processor: Intel(R) Core(TM) i5-4570 CPU @ 3.2GHz, RAM: 4.00 GB, System type: 64-bit

Hi Catherine,
Welcome to the Adobe forums.
Please try the steps mentioned below and check if it works for you.
1. Launch Premiere Pro and create a Project, go to File menu>Project Settings>Renderer and change the Renderer to Software only mode, delete previews if you get a prompt and then try to import the clip.
2. If step 1 fails or the Renderer is already on Software only mode, go to Start Menu and search for Device Manager, go into Display Adapters and Right click on the Graphics card to select Update driver software option, on the next screen choose "Browse my computer for driver software", then choose "Let me Pick from a list..." option and from the list select "Standard VGA Graphics adapters. You might need to change the screen resolution of your screen and once done restart the machine again.
Launch Premiere Pro and import the clip to check.
Regards,
Vinay

Adobe Acrobat Pro DC keeps crashing with "Not Responding" message

Hi there, I just started using Adobe Acrobat Pro DC and it keeps crashing with a "not responding" message. It never used to happen with acrobat XI. Any ideas?
I'm using Windows 8.1 on an Acer with AMD A10-5700 APU 64bit OS...

Hi ,
Does this happen while accessing any PDF ' or when you launch Acrobat ?
You could try repairing Acrobat and see if that helps .
Is there any error number or exit code associated with the error message ?If yes ,please share the screen shot of the same.
You could also uninstall Acrobat using the Cleaner Tool .Here is the link to download Cleaner Tool .
Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs
Once uninstalled you could try downloading it again .If it is a subscription ,you could refer the following link .
https://helpx.adobe.com/acrobat/kb/acrobat-dc-downloads.html
You could restart your machine as well and then try to launch Acrobat .
If it is a perpetual license ,you could refer to this one .
https://helpx.adobe.com/acrobat/kb/acrobat-downloads.html
Make sure to disable all the third party software before you start installation .
Let us know how it goes .
Regards
Sukrit Dhingra

Adobe Premier Pro CC Crashes PC with error DRIVER_IRQL_NOT_LESS_OR_EQUAL (wdf01000.sys)

i am a gamer on youtube and i use my all the time i recently did a full system upgrade exceot the ram and hardrive it working fine but then the harddrive became faulty and premier pro cc allways crashed when i opened it so i put a new 120gb ssd in installed
a new version of windows did all the driver updates and it worked fine untill i closed premier pro now im back to it crashes every time i open it and it crashes my pc i allways get this error message DRIVER_IRQL_NOT_LESS_OR_EQUAL (wdf01000.sys)
could someone please help because i really need my pc working again and i hate using my mac

Thanks.
DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
This indicates that a kernel-mode driver attempted to access pageable memory at a process IRQL that was too high.
A driver tried to access an address that is pageable (or that is completely invalid) while the IRQL was too high. This bug check is usually caused by drivers that have used improper addresses.
2: kd> .trap 0xffffd000fe1dc280
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000000 rbx=0000000000000000 rcx=0000000000000000
rdx=00000000c0000001 rsi=0000000000000000 rdi=0000000000000000
rip=fffff80031ca470a rsp=ffffd000fe1dc410 rbp=00000000c0000001
r8=00000000c0000001 r9=0000000000000000 r10=0000000000000038
r11=ffffd000fe1dc4c0 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei pl zr na po nc
Wdf01000!FxRequest::CompleteInternal+0x4a:
fffff800`31ca470a 488b91b8000000 mov rdx,qword ptr [rcx+0B8h] ds:00000000`000000b8=????????????????
On the faulting instruction, there was a failure writing the contents of the
rdx register into the memory address pointed at by the sum of the
rcx register + 0B8h. This was brought upon by USBXHCI.sys.
1. Remove and replace avast! with Windows 8's built-in Windows Defender for temporary troubleshooting purposes as it's likely causing conflicts:
avast! removal -
http://www.avast.com/uninstall-utility
Windows Defender (how to turn on after removal)
A.
Navigate toControl Panel
(with icons). You can do this by hittingStart
> Search > Control Panel.
Once in Control Panel,
change the drop-down fromCategory
to
Large
and/or Small icons.
B.
Among the list of icons, find and click
Action Center.
C.
Assuming the removal of your prior antivirus software went properly, you will notice for both
Spyware and unwated software protection (important) and
Virus protection (important), it'll have a button labeled Turn on now. Click this button (it doesn't matter which, as Windows Defender serves as
both in Windows 8/8.1).
2. I am curious in regards to whether or not your Avstream drivers are causing a problem, as they are rather old:
2: kd> lmvm ElgatoGC658
start end module name
fffff800`34492000 fffff800`344a1000 ElgatoGC658 (deferred)
Image path: \SystemRoot\System32\Drivers\ElgatoGC658.sys
Image name: ElgatoGC658.sys
Timestamp: Wed Nov 09 02:39:12 2011
I would uninstall if no update is available.
Regards,
Patrick
“Be kind whenever possible. It is always possible.” - Dalai Lama

My photoshop elements 8 no longer works...when I open an image in it, the application opens and then suddenly closes with the error message:"Adobe has detected that the application Adobe Photoshop eleents has unexpectedly quit"

Can anyone help me with the 'unexpectedly quit' error message I now get when opening an image in Photoshop elements 8?

Imilgrom
If your product is Photoshop Elements, then you have posted in the wrong forum. Somehow your thread got posted in the Adobe Premiere Elements Forum (video editing).
Please re-post your thread in the Adobe Photoshop Elements Forum (probably quicker choice) or wait for a moderator here to see your thread here and then move it from here to there.
Photoshop Elements
ATR

Dbca unexpectedly closes with out error message (solution found)

I am trying to create a db using dbca in oracle 10.0.1 on a windows server 2003 sp1.
I get to the step where you set the memory usage for the db I click next and dbca just closes no error message nothing just disappears.
Any ideas
Thanks
Eric
Message was edited by:
eric.wc

Well I was finally able to get some more info. By starting dbca from the cmd prompt I got an error message in the cmd window and a log file name. Had one of my Java developers look at it and problem solved.
Now I know you all waiting to here the solution... Has to do with windows security...
I am part of the domain admin group that group is part of the local admin group but that was not good enough I must be explicitly added to the local admin group.
Windows strikes again.
Eric

Every night at 7pm CST/midnight GMT, Firefox closes with no error message, or warning message. All add-ons have been disabled. Running Win7 with Firefox.

I have already disabled all ad-ons, one at a time (11 total) to see if any of them caused the error. None did. I have already checked all programs, including antivirus to see there was a timed action that was triggering the shut down. When it does shut down, I receive no error messages or warnings about muliti-tab shutdown. Every time, Firefox simply closes. When I re-open Firefox, I do not receive the option (which I have set) to restore my tabs. No other programs are affected. I am happy to provide any more information, just let me know what you need. The Troubleshooter data below is from 1.5 hours after the most recent Firefox shutdown.

I have '''exactly''' the same problem as you do, and it also happens in other browsers as well (I use Internet Explorer and Google Chrome too).
Most of the times, the restore previous session option is grayed out, but other times it automatically asks me if I want to restore the previous session. When I click 'Yes', it restores all the tabs of the previous session alongside a new one, open in the following site: http://krzemik.pl/
The site is Polish, but I don't even live in Poland.
The site says it's safe, but I'm suspicious it distributes some kind of adware that causes this problem. I've already reported it, though.
I also have another problem that, whenever I search for something that contains the word 'virus' on a search engine, the browser is automatically shut within 1 or 2 seconds without any kind of warning or error message, I also can't open one of my antispyware programs (AdAware, to be exact), as it is immediately closed as if I had clicked the 'X', per say, even in Safe Mode. I'm also prevented from using my backup restore function in the control panel, or even using commands to activate it. I've fully scanned my computer in Safe Mode using another antispyware (SuperAntispyware) twice, and nothing as solved the problem.
I'm not sure if these problems are interconnected, though.

Photos are there but the videos are appearing as blank icons with an error message after the upgrade to Yosemite

I bought myself a new MacBook Pro and migrated everything from a Time Capsule/Time Machine migration. My previous computer was slowly dying so I had backed it up although it was running Mavericks. I migrated everything to the new computer from a Time Machine backup - all my photos and files are there - but in iPhoto, the videos (taken with a camera as .MOV files which usually appear in iPhoto) are appearing as blank icons. When I click on them, I get the error message, "The operation couldn’t be completed. (OSStatus error -54.)" and the video doesn't play or appear. The video does, however, appear when I click on "Reveal in Finder - Original File" - so the files are there - they just aren't being compatible with my iPhoto in Yosemite.
Any idea why?

Do you still have access to the old system? If so drag the iPHtoo library on the new system to the desktop and Connect the two Macs together (network, firewire target mode, etc) or use an external hard drive formatted Mac OS extended (journaled) and drag the iPhoto library intact as a single entity from the old Mac to the pictures folder of the new Mac - launch iPhoto on the new mac and it will open the library and convert it as needed and you will be ready move forward.
LN

Adobe Premier Pro CC 2014 closes with no error message after opening project

Similar Messages

Maybe you are looking for