Adobe Premier Pro CS3 Debug event

I have Preimeir Pro CS3 with a Debug Event error
..\..\Src\Audo\monitormixer.cpp-153
what is it, how do i fix it

Work through all of the steps (ideas) listed at http://forums.adobe.com/thread/459220?tstart=0
If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section, the questions at the end of the troubleshooting link... most especially the codec used and your project and output settings

Similar Messages

Adobe Premiere Pro CS3 DeBug Event

Hello all, Adobe Premiere keeps crashing and I keep getting the following debut event message:
[/drusilla/pro/3.2.0/Mezzanine/Make/Mac/../../Src/ReplaceClip.cpp-278]
I am working on an iMac. In general, when I try to work in Premiere it is slow going. I usually have to pinwheel wait while a video I import is added, or a monitor box is opened. So I am wondering if it's partly to do with my computer? That seems weird to me though because I am working on an imac with 2 gigs of RAM. Doesn't seem like it would be THIS slow going.
Anyway, if anyone could help me out with why its crashing that would be great.

Work through all of the steps (ideas) listed at http://forums.adobe.com/thread/459220?tstart=0
If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section, the questions at the end of the troubleshooting link... most especially the codec used and your project and output settings

How do I fix this "flickering" in Adobe Premier Pro CS3?

Hi all, I'm currently working on an MMV (A music video based off of a certain video game, similar to anime music vids), but I have a big problem =\ Theres this "flickering" thing in the middle of the video, and I can't figure out how to get rid of it. It plays through, and at a certain point it goes back a few frames and repeates about 5 times.... Just going back and forth... I have tried removing audio but it didn't work. The AVI files outside of Premier Pro are fine. I have also rendered it numerous times to see if it was just Adobe's preview playing up, but.... it wasn't....
If you still can't understand it, I have recorded my problem and uploaded it, in case anyone wants to look at it.
(http://www.filefactory.com/file/ag437b3/n/My_Problem_avi)
In the vid I am tapping arrow keys through frames, not just playing through.
The first section, the chat bubble is meant to change twice altogether.. but it flickers through and change about 10 times.
Second section, and the rest, are all repeated actions that are only meant to happen once...
Help would be greatly appreciated, Thanks.
Oops, one more thing (offtopic). My AVI files stopped working literally 30 seconds ago... They just play a black screen on WMP and do nothing in VLC Player. I fixed this previously today by upgrading Xvid.... but I have the latest now, so I don't know what to do... (I can still play them in Quicktime, however)

Wow - Fast reply.
Anyway, thanks, I'll lookat that after I post this. I have 1 more question. My video recorder cn record in the following codecs, the one in bold is the one I used. Which one has the highest quality, that will work in Premier? Thanks
Microsoft Video 1
Intel IYUV codec
Cinepak Codec by Radius
Xfire Video Codec
Xvid MPEG-4 Codec
Intel Indeo(R) Video 4.5
Edit: I'll decide which posts were most helpful after this =]
Edit 2: Do you reccomend using Stoik Video Converter, or VirtualDUB?
Edit 3: Thanks for your help, it's fixed now

Spurs engine Hardware acelerated encoding Adobe premier pro CS3 plugin

I read online that adobe offers plug-ins for Premiere CS3 to use the spurs engine Hardware encoding for exporting media. And found this online "Premiere CS3 uses of CRI's SpursEngine for Premiere CS 3 Plug-in to export the settings interface." i would love to know if this plug in is avaliable for download ?? and where can i get it ?? is it avaliable to buy ?? can it be used with any spurs engine card ( including the firecoder blu card & WinFast PxVC1100 ). hope to hear from you guys soon.
Here's is the website that advertises the plugin :
http://translate.google.com.au/translate?hl=en&sl=zh-CN&u=http://www.dvedit.cn/archiver/ti d-65416.html&ei=VfP7Sd2xBsSCkQXEt-jhBA&sa=X&oi=translate&resnum=5&ct=result&prev=/search%3 Fq%3Dfirecoder%2Bblu%2Bpremier%2BCS3%26hl%3Den%26sa%3DN%26start%3D10
Regards Martin Wichtmann.
PS: i emailed leadtech company ( wich make and sell the WinFast PxVC1100 - and was the card being used in the above link ) about this matter and they responded with the following message :
Dear customer!
Thanks for your contact.
Unfortunately, it is made by adobe.
So please contact to Adobe to check the fee.
Thank you.
Best regards.
Leadtek Service, PCBU, Leadtek Research Inc.

you've read nothing ?. its in the website i provided ( did you check the link), it evan shows screen grabs of the plug in being used. so it is their i just want to know how to obtain it. they also state ( on that web page ) "The road map in accordance with the CRI, they will launch in April in the Premiere CS 4 plug-ins, Premiere CS 4, taking into account all types of file format support for more comprehensive package, this version of the plug-in is very exciting.
" but the plugin they were using was for CS3.
Here are the links dierctly to the pictures :
http://www.pcinlife.com/article_photo/pxvc1100/arts/adobepcs3.png
http://www.pcinlife.com/article_photo/pxvc1100/arts/adobepcs3_02.png
Regards Marty.
PS: you cant see the pics realy well in this forum, so best to check them out on the website i provided in my earlier post.

Premier Pro CS3 Error "time.cpp-390"

Please help!
Whenever I try to manipulate my timeline in Adobe Premier Pro CS3 on a short film that is nearing it's deadline, I get this error "time.cpp-390" followed by the software crashing. Any help?
Adobe no longer provides support for their product and their tech support help line is utterly useless. I have google searched the error and searched the forums... I own 15 CS3 Creative Suites and if they think I am upgrading to CS5.5 after this customer service experience... I may be moving to FC7.
I really need to fix this!
Thank you for any help you can be.

The event viewer gives me nothing, unfortunately. Thank you for the help though! I did find a solution though...
Reinstalling the software (the ONLY solution offered by Adobe support people) was entirely a waste of time. So was the nearly two hours I spent talking to four people on their support line just trying to get them to help me. I learned that if I just kept asking for a superviser, they would keep letting me talk to someone different. Apperantly, there is no end in the number of people who are considered "supervisors" at adobe...
Adobe provided no useful assistance other then telling me to reinstall the software. I am actually more than simply dissapointed with the complete lack of support and complete lack of effort in helping me find a solution to the issue. I actively suggest people use something other than Premier Pro for no other reason than a lack of integrity by the company in supporting thise who spend thousands of dollars on their products. Anyway... I hate them and I'm tired of crying about it.
SOLUTION TIME!!!
Ok, so here is the solution. The ONLY solution was to copy the timeline and the bin into a new, fresh project file. I started a new, empty project, then copy/pasted the timeline from the old to the new project. I did the same with the emaining contents of the bin and voila! the error stopped happening. I have NO IDEA why... but I know that it works and it only took me two days to figure out. In fact, all of the projects I have that are in various stages of completion, must be coppied into new projects in order to work. In other projects, I don't get the time.cpp-390 error, it just simply will not insert a clip no matter what I do.
So, I'm glad it works... I just wish I knew what the problem was.

Adobe Premiere Pro CS3 "The editing mode used by this project could not be loaded."

Hello-
I am encountering an issue with my Adobe Premier Pro CS3. I am trying to open up a project that another person has created on a different editing system. When I try to open, it comes up with the error "The editing mode used by this project could not be loaded. The project will be opened in Desktop mode." The next window is a Windows Explorer screen, that wants me to choose a file to open. If I cancel that, it brings up a blank looking project with no timeline or anything?
A quick comparison of systems:
Mine:
HP dc7700s desktop
Windows XP OS
Adobe Master Collection CS3
Hers:
IBM compatible laptop
Microsoft Vista
Adobe Premiere Pro CS3
Adobe Photoshop CS3
I have googled the error message, but have not found anything to fix this. I have also verified from Help - About that we have the exact same versions of Adobe Premiere Pro CS3 installed.
I need to be able to view this project on either computer. Any advice would be greatly appreciated!!!
Thank you!

>project will be opened in Desktop mode
I have never used any non-standard files, but from reading here, desktop mode is used when the video files are not standard... in one way or another, but usually pixel dimensions
What is the codec and properties of the files in that project?
Are you sure they are 100% standard?

Premiere Pro CS5 Debug Event

Hi there,
I've been a long user of Adobe software and I've just recently had an issue with Adobe Premiere Pro (first Debug event I've ever had with the software),
In which it has encountered an error with "ComponentChain.cpp-498". Now, I'm running on Windows 7 64-bit way above the minimum specifications for the application. Now, this has only recently started up but its actually preventing me from render or editing any of my footage, and so before I jump ahead with tearing up the system and figuring what is what, I was wondering if somebody could please advise how I would be able to go about fixing this problem.
Thanks

I find only one reference to your specific element (in CS4):
http://forums.adobe.com/message/2462753#2462753
I don't think that helps.
The speculation there was it could be a corrupt project. sometimes corrupt projects can be helped by importing into a new project.

Best Configuration for running adobe Premiere Pro CS3

I have a 4 HDD system and the ability to run RAID. What is the best configuration to run Adobe premier pro CS3. I want to be able to get the best perfomance out of my system.

Is it possible to run different RAID combination using the same controller card?
For example:
1) 2 HDDs, RAID 0 configuration for Operating System/Programs
2) 2 HDDs, RAID 0 configuration for Project/Scratch Disk/Paging
3) 2 HDDs, RAID 0 configuration for Media/data.
I have a Asus Striker Extreme Motherboard.

Adobe Premiere Pro CS3 3.2.0 update

Thought I'd share a bit of information on the 3.2.0 update that will be coming out via AUM this morning. The update will come out first via AUM, then will be available on the updates page shortly after at http://www.adobe.com/downloads/updates/?ogn=EN_US-gntray_dl_updates.
The readme will also be hosted at http://www.adobe.com/support/documentation/en/premierepro/releasenotes.html.
Dave Helmly has posted about the update on his blog, as well: http://blogs.adobe.com/davtechtable/2008/04/xdcam_and_premiere_32.html#more
New in this release:
- This update adds compatibility with the Sony XDCAM range of cameras. This includes disc-based XDCAM and XDCAM HD cameras., and the newer SxS-based XDCAM EX cameras. Content from XDCAM cameras can be imported and edited natively without transcoding or conversion. This makes possible similar workflows to Panasonic P2, including the ability to edit content directly from XDCAM EX cameras.
- Note: Adobe Premiere Pro CS3 3.2.0 does not support IMX editing or XDCAM HD50 editing at this time. Export to XDCAM is also not possible.
- Adobe Premiere Pro now has presets for HDV 24p. Note: Adobe Premiere Pro does NOT support print to tape in 24p mode.
- Improved handling of MPEG streams (e.g.: HDV video), along with error detection. MPEG stream errors can occur during recording due to tape dropouts, record start/stop glitches, timecode breaks, etc. Bad frames caused by these MPEG stream errors are identified during import/indexing or playback. These frames will play back as full red frames to alert the user that there is a problem in the encoded video at that location. Adobe Premiere Pro will also log error messages to the Events panel, indicating where the error(s) were encountered in the stream. Users can open the Events panel, determine the location of the MPEG stream error, navigate to that location in the clip and take corrective action, such as trimming out the video glitch or covering up the red frames with duplicated good frames copied from before or after the glitch. Note: MPEG files will need to be re-indexed to take advantage of the improvements in Adobe
Premiere Pro CS3 3.2.0. For more information, please see Working with MPEG Files.
Notable fixes:
- Titles/Footage no longer show up as offline when reloading saved projects.
- Rendered preview files no longer missing when reloading saved projects.
- Certain filters and/or transitions are now applied correctly when reloading saved projects, until the timeline is forcibly refreshed.
- When exporting via the Adobe Media Encoder, there is no longer a long delay before the progress dialog shows and rendering resums (Mac OS 10.5.x only).
- 24p HDV clips shot on a Canon XH A1 no longer come in incorrectly as 30 fps clips.
- Creating an offline clip in the project window then attempting to link it to media on disk no longer results in the application crashing.
- QT PAL movies rendered out of Adobe After Effects® software are no longer incorrectly identified as requiring rendering in a Adobe Premiere Pro PAL project.
- DV Clips of certain specific durations are no longer incorrectly identified on the timeline as requiring rendering.
- For P2 DVCPro clips, the right-most pixel column no longer contains video garbage.
- Fixed a memory fragmentation problem that would occur with projects with many custom bin columns.
- Fixed a bug where exporting to a QuickTime movie (with QT 7.4) would crash the application.
- Selecting "display only exact name matches" when relinking clip no longer crashes on Leopard.
- Fixed an issue where 30p and 30f HDV clips would incorrectly be identified as requiring rendering in a 29.97 progressive project.

Harm,
I don't use HDV, so I'm not sure if this is the case or not, but in the top post, there is mention of having to re-index the MPEG files "to take advantage of the improvements in Adobe Premiere Pro CS3 3.2.0." While it seems this should be an automatic process, maybe wiping out the previously-created index files (I seem to remember them being in the Media Cache folder when importing MPG files from DVD rips and such) would let the project open. Or, maybe the old trick of importing an existing project into a new one? Just a couple thoughts...
To the other poster: surely, I don't jest. At least, not when it comes to anything in the video production industry and my operation in it. Long ago, I gave up expecting perfection from any particular piece of hardware or software, and just focused on being creative. That's why I got into this. I refuse to let any piece of equipment dictate what I can or can't do--I just find another way around. Funny how we managed to make it as a species and a civilization as long as we have, and now that computers are here to make our lives easier (*snort*), we're quick to raise our ire about everything that's wrong with them. That's why I will always marvel at things built long ago prior to the advent of all the technology we take for granted today.
Anyway, we're all entitled to our opinions, and I've taken this thread completely off-topic. My apologies, so...

Importing sound into Premier Pro CS3

I have a Sony HDR-XR100 HD video camera. It saves files with an .m2ts extension. This extension is not supported by CS3. Using Sony's PMB (Picture Motion Browser), I convert the .m2ts files to .mpeg2. When I import these files into Premier, they appear, but have no audio. How do I import the audio? Thanks.
David

I put it in the main Premier folder, presumably like you did, and it worked. I'm not real familiar with Macs, but the folder I put it in was "C:\Program Files\Adobe\Adobe Premiere Pro CS3". There are several other files there with similar names. If that doesn't work, I'm lost, since obviously I had to come here for help myself :).
David
Date: Fri, 23 Jul 2010 19:40:24 -0600
From: [email protected]
To: [email protected]
Subject: Importing sound into Premier Pro CS3
Hey, I'm using CS for Mac and I'm having the same issue , importing .mpg into PPro and get no audio.
I found the ad2ac3dec.dll file online but I'm not sure what folder to place it in. I've found the folder named Adobe Premire Pro CS3 and just pasted it into that but it didn't work.
My camera only records in .mpg and I really don't want to spend money on a converter after spending a bucketload for CS3...
Any help would be much appreciated!
>

Premier Pro CS3 doesn't activate

Hi, my Premier Pro CS3 doesn't activate. Or once it kind of did but now it claims that it hasn't. I've tried to solve this with Adobe chat support personel for 4 times now and three of them said "Now it works, you won't run into problems anymore", which of course I have, and the last fellow said "It's a technical problem which we have little information of, please ask from technical support". He gave me a link to this forum. How you guys could help me if they couldn't is beyond me, but I definitely hope you can. The product is licensed for two computers in our company, and last time the chat -fellow cleaned previous activations and now it should only be licensed on my computer as my collague hasn't got time to do it yet. The error message that I'm getting is something like "Unable to connect Adobe" and then there're 3 options 1st: retry (doesn't work) 2nd: try again later (gives 30 days trial I guess) 3rd: Trial or such.. It work fine two times after the 3rd chat -fellow "fixed it", but then I got Adobe CC with photoshop and LR5 and now the problem is back. Any ideas? I would greatly appriciate any leads fixing this as I should use Premier for my company.

Hardware crashes or virus infections or simple software problems happen, so you should buy AND USE software to make a full backup of your hard drive to an external USB hard drive... plus, making step-by-step backups during a new setup or major program addition makes it easy to go back a step if something doesn't work
This backup and then restore is, of course, only to the same computer with a new drive (or the same drive as long as you don't mind writing over everything) since doing a restore to a new computer won't work due to Windows and many programs having activation information that is keyed to your hardware (which is why Windows will force you to RE-Activate if you change very much hardware)
The product I use is at http://www.terabyteunlimited.com/image-for-linux.htm
Image runs off of a bootable CD via Linux (the Zip you download includes a program to make the bootable CD) and it reads EVERYTHING on the drive, even the hidden registration information, so everything is restored when needed... and you may restore the image to a brand new drive in case of a crash, and not have to re-install anything

Adobe Premier Pro asking for CPU extension SSE2???

I installed Adobe Master collection when first released with the exception of Premier Pro.
Now decided to install it. Installation does not start as I get error message that machine does not meet requirements but needs "CPU extension SSE2"
Any ideas what this means??
Thanks

First help us understand your setup:
Mac Pro or G5?
http://discussions.apple.com/category.jspa?categoryID=108
maybe its the 1MB RAM you have listed?
CS3 is a univeral binary now.
Have you looked on Adobe forum? Google?
Adobe - Adobe Premiere Pro CS3
Topic Title: Support for CPU extension SSE2: Topic Summary: Error during installation on PowerPC Mac:
http://kb.adobe.com/selfservice/viewContent.do?externalId=332238
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=72&catid=64 4&threadid=1276287&enterthread=y
That is an error most often seen under Windows. A G5 can't run Windows (or use BootCamp).
http://en.wikipedia.org/wiki/SSE2

Error Message: Sorry, a serious error has occurred that requires Adobe Premier Pro to shut down.

Hi. I'm having another serious problem with CS4 (the version that comes with CS5 when you don't have 64 bit capability. I just finished a project, had saved it, and then had switched over to Adobe Encoder to create a finished flash video (which worked perfectly). I shut down CS4, went home, tried to restart the main project to create a video from the same project (wanted to make an mpeg version as well) and got the following error message:
Sorry, a serious error has occurred that requires Adobe Premier Pro to shut down. We will attempt to save your current project. Then the system shuts down.
Not only can I not open the project I was working on, I cannot open any of my prior projects without receiving the same error.
Does anyone have any idea what may be causing this issue and how to resolve it?
Thanks in advance for any suggestions.
By the way, is everyone else having the same amount of problems with this software? I've never had any software that has had so many problems from the beginning. My opinion of this software and Adobe in general has gone down substantially.

Not enough information for anyone to even make a guess
Work through all of the steps (ideas) listed at http://ppro.wikia.com/wiki/Troubleshooting
If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section, the questions at the end of the troubleshooting link

A serious error occurred that requires adobe Premier pro to shut down

Por favor alguien ha solucionado este problema?. Me ocurre solo después de haber exportado el proyecto como AVI, si lo quiero volver a activar aparece el mensaje "a serious error occurred that requires adobe Premier pro to shut down".
la solución que aparece en un foro de eliminar ciertos softwares de sonido no funciona porque no tengo esos programas.
Si alguién dió con la solución o cuañquier experiencia al respecto, quedaré muy agradecido..
Eduardo

Not enough information for anyone to even make a guess
Work through all of the steps (ideas) listed at http://ppro.wikia.com/wiki/Troubleshooting
If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section, the questions at the end of the troubleshooting link

Unable to do Audio Editing in Adobe premium pro cs3 in windows 7 Machine

I am using adobe premium pro cs3 on Windows 7 machine.when I connect a camcorder using firewire port to the PC I am able to open the application and capture the video and edit the same but I am unable to hear the Audio hence cannot edit the same....Plz let me know how can hear the audio in this application so that I can edit the same....
My audio system for the PC ia working fine but in the application I cannot hear the audio....

I gave administrtative rights to the Local user.Even then the audio part did not work.I removed the administrative rights.
I found the answer
I opened a neew project then clicked on "Edit" then "Preferences" option,then "Audio Hardware" option,Selected "ASIO Settings" and then Selected "High Definition Speaker option"(Sync Enabled-Yes) and deselected "High Definition Speaker option"(Sync Enabled-No).
After making this changes I was able to hear the Audio and Edit the same.
Issue resolved.

Adobe Premier Pro CS3 Debug event

Similar Messages

Maybe you are looking for