Adobe Premiere 11 did not start
Hello
'I installed Adobe Premiere Elements 11. But after installation, i never could start. the first time i start i get a little hour glass for short time but nothing more happens. Second time i get nothing and nothing happens. After reboot it is always the same.
I also uninstalled and reinstalled it, nothing.
Also i installed the full version, and i installed the trial version,. always the same. did not start.
My system is Windows 7 64 bit Ultimate on a HP Elite 7300
Hannes
DaiZhenLong
Thank you for your follow up and supplying the requested information. Much appreciated.
I am not sure if you tried the following but I post it since you have gone through so much already and we have not found the answer to success for you.
Think about downloading and installing the free 30 day tryout of Premiere Elements 11 from Adobe. See if you can get it to run as the trial version. If and when you do, then open it an insert your purchased serial number when it asks "Buy Now" or "Continue the Trial".
But, please make sure that antivirus and firewalls are off during this download and install and until you see that you have Premiere Elements 11 project open and ready to work.
What do you think?
We will be watching for your follow up.
ATR
Add On...By the way, did you ever say how you installed Premiere Elements originally....from installation disc or from installation files from online download from Adobe? What I have suggested best lends itself to installation disc since there may be a problem getting a second download of installation files from Adobe since you already have done that.
Similar Messages
-
Adobe premiere pro did not appear on my menu as creative cloud could download it.
adobe premiere pro did not appear on my menu as creative cloud could download it.
http://helpx.adobe.com/creative-cloud/kb/all-apps-displayed-aam.html
-
Getting the message Adobe Premiere Elements could not start after silent install
I am getting the following message after running a silent command line installtion. The coomand line I am using is
setup.exe" /S /UL1033 /V"/qn COUNTRY=244 SERIALNUMBER="xxxx-xxxx-xxxx-xxxx-xxxx-xxxx" the x64 on Windows 7 64-bit.
After manually running the set-up.exe installer located in the ElementsSTIInstaller folder, Premiere elements launchs.
What is the cause of the error after running a silent installion?
JmFrxHi jam62m,
Please follow the steps mentioned in kb article : http://helpx.adobe.com/premiere-elements/kb/silent-install-instructions-premiere-elements- 4.html
and command to install Premiere elements silently is : start/wait OEM.exe /UL%LangCode% /V“SERIALNUMBER=%Adobe volume license serial number%”
Example : C:\ Adobe Premiere Elements 10/Adobe Premiere Elements 10 - 64 Bit> start/wait OEM.exe /UL1033 /V"SERIALNUMBER=1111-1111-1111-1111-1111-1111"
Regards,
Jatin Dembla -
Adobe Premiere Elements could not start. Please uninstall and reinstall.
Worked with support quite a bit over the past few months. I am getting the subject named error after selecting the Country after my silent install.
I was provided application.overide XMLS and using the setup.exe to install the application. It installs successfully, but does not launch.
This is on Windows XP. Not sure what else to do. We have been attempting to get this to install silently since September.
Setup.exe /S /v/qn. - is what i am running. If you reply please don't tell me to use OEM.exe, we have confirmed with Adobe Support that this does not work in my situation.newbie9999
The answers are in the details and they are lacking in the information needed to solve this issue.
What version of Premiere Elements are you using and on what computer operating system is it running?
Do you have the latest version of QuickTime installed on your computer with Premiere Elements?
Are you running the program as Run As Administrator or from a User Account with Administrative Privileges?
And, as John T. Smith has asked, is your video card driver up to date according to the web site of the manufacturer of the video card?
All basic Q&A background essentials.
Uninstall, reinstall is often suggested as part of the no start issue. You could have a bad install. Factors need to be ruled in and out. No guarantees. I would suggest the following scheme for this uninstall, reinstall...I am assuming that you have never gotten into the Premiere Elements workspace with the current (first?) install.
1. Control Panel, usual uninstall
2. Run the ccleaner (regular and registry)
3. Reinstall (with antivirus and firewalls disabled in Action Center).
What do your computer resources look like? I saw no description of them?
Let us start with the above and then plan the troubleshooting strategy based on your answers.
Thank you.
ATR -
Adobe Premiere Elements 10 not starting up.
When ever I start up Premiere it opens up with a message that says:
Premiere Elements 10.0 has encountered an error
[..\..\Src\EMS\WSEMUtil.cpp-715]xpcm
Thanks for the reply. We may have our answer in your Premiere Elements 10 running on a computer that uses a NVIDIA GeForce card. There is a known issue relating
to Premiere Elements 10/NVIDIA GeForce with the solution being roll back of the driver version to about May 2013. But, I have not seen it reported before in association
with the particular error message
[..\..\Src\EMS\WSEMUtil.cpp-715]
But because of the history on this matter in
the Announcement at the top of this forum
and
ATR Premiere Elements Troubleshooting: PE10: NVIDIA Video Card Driver Roll Back
we do need to rule this factor in or out.
Go to the following site for older version NVIDIA GeForce and plug in your information to download and install the May 2013 driver version
http://www.nvidia.com/Download/Find.aspx?lang=en-us
It is the Driver GeForce 320.18 Driver........320.18.......May 23, 2013 that you want.
Are you working with SD or HD projects?
Please review and consider and then let us know the outcome. The references cited with give you a
comprehensive view of the Premiere Elements 10/NVIDIA situation.
Thank you.
ATR -
I have administrator rights to the computer. The drivers are up to date. But I am still getting the error message "Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again" when opening Premier Pro CS5.5. This appears to have happed after I upgraded to Mac OS 10.10.2.
Anyone?
ThanksHi Stan.
I had the same problem as you did though I am using Adobe CC. I saw nobody replied to you so perhaps my eventual success on my later version may have applications to the error on your version.
Anyhow, I did all the suggestions found here (Error "Premiere Pro could not find any capable video play modules" | Startup ) first and updated my NVidea card to no avail. Eventually what did the trick was this...
After mucking about with the video card, I said "OK lets just have a go at Premiere itself." So I uninstalled Premiere CC and reinstalled it. Now for some reason it didn't give me the latest patch but a slightly earlier version than the current one but lo and behold it was fine with the video card again. I was able to get my friend's video imported and quickly edited but then was having some issues with exporting where it would hang up but I went into Adobe Media Encoder and exported it there without a care. That task out of the way, I then went and made the update to the latest patch and it works perfectly fine - no video driver issues.
So short of it is this - if you've updated your drivers, perhaps what you could try uninstalling and reinstalling Premiere.
Let me know if this works.
Cheers and good luck -
I updated to Premiere Pro CC 2014, all the other Adobe CC 2014 software works great, but Premiere doesnt even load. The starting page (frame) comes up - my whole computer slows down and after a minute or two it crashes completely and comes up with the message : "Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again."
I'm running a macbook Pro 15" (2014) with 16GB RAM and 760GB SSD.
PLEASE HELP!Hi Delarey,
Please go to the following location and rename the folder to old_folder name
User/user library/Application Support and rename Adobe folder
User/user library/Preferences and rename the Adobe folder
Then go to Documents folder and Go to Adobe/Premiere pro/8.0 and rename 8.0 folder
Make sure that you are in user library if you are not sure check the link below.
Access hidden user library files | Mac OS 10.7 and later
Regards,
Vinay -
Hi
I just want to start and begin to work in Lightroom.
I just installed the program.
Now I want to get al lot of Information to understand the program. on this side: http://www.adobe.com/de/products/photoshop-lightroom/features.html
But teh films did not start.
On another page all films( other films) are only in english.
https://helpx.adobe.com/de/lightroom.html
https://helpx.adobe.com/de/contact.html?step=LTRM_how-tos-troubleshooting_how-tos
Can this be really true, that I have to learn perfect english to get informations from ADOBE to get informations about using the program ?
I need a completly Trainee tomorrow to work soon in the program.
Is there someone to give me the missing informations ?But teh films did not start.
Those films at http://www.adobe.com/de/products/photoshop-lightroom/features.html worked when I played them. Maybe it's your browser, try a different one. -
Adobe premiere elements 9 not editing
This is my second attempt to post (my last one a little while ago didn't appear).
I have bought the above package mainly to edit some club videos. It is driving me mad.
I have a Sony Viao
Vista Home Premium
Service pack 2
Intel Core DUO CPU
2.00 GB Ram
32-bit
I have imported a video from my comcorder to the PC via ION EZ Converter. The video is stored as a .mpg file.
When I open up organiser the thumbnail is there.
The first time I opened organiser I somehow managed to drag the video to the left side of the screen and got a timeline but when I started it up I got sound but no picture. However, now when I open up organiser and go into EDIT, aand try to drag across I get automatically sent into video effects and can't go back!
I was told that the problem may be due to incorrect codecs and I have downloaded K-LITE MEGA Codec but that doesn't seem to have helped.
Before I did this I also got a message in elements
"we have detected an incompatible display driver. To get a better and faster playback performance please update your display driver.
Display driver details: NVIDIA Corporation - GeForce 8400M G7/PCI/SSE2 2.1.1"
Help
Really frustrated
Graham WTThanks Barbara
I found it also and I''ve put an entry there too.
Graham
Date: Tue, 18 Jan 2011 16:42:16 -0700
From: [email protected]
To: [email protected]
Subject: Adobe premiere elements 9 not editing
Hi, Graham WT. Sorry you're having trouble. You know, Premiere Elements has its own forum, and the video mavens mostly hang out there:
http://forums.adobe.com/community/premiere_elements
You'll probably get more help with this if you post over there, where more people are working with video. Good luck!
> -
Adobe Premiere CS3 will not open!
Adobe premiere CS3 will not open. When I click on the Adobe icon on my desktop, I get this message: This application has failed to start because prm.dll was not found. I've tried several things such as: uninstalling the program then reinstalliing it. I tried to open Adobe by clicking on one of my projects by opening MY Computer from start on the taskbar, then click on c drive, etc. but it will not open. Before I started getting the error message stated above, when I clicked on the icon, the program would load to the point of showing the top portion of the page (file, edit, etc.) then stop. It would never fully load. HELP!!!!! I'm in the middle of trying to meet several deadlines.
First, search your system for every instance of prm.dll. See if you have one (could be corrupt, but a Repair Install should have repaired it) in your PrPro CS3 folder hierarchy. Do you have any more? How do the dates and sizes compare to the one, if there is one, in PrPro? Here is a LINK to a .dll site. I do not know this site, so cannot even comment on their .dll's. I'd do the first suggestion, well - first.
Also, I do not know this .dll. It could be a VST from an Audio editing program, or similar. Some of these have been known to bring PrPro to its knees, at launch. Might be worthwhile to check into it a bit more.
Also, take a look at Event Viewer. This ARTICLE will give you some tips on what to look for. Could be more happening, than the error message might lead one to believe.
Good luck,
Hunt -
Adobe Premiere Elements does not open after installation
Hello,
I have written before last week. I have bought Adobe Photoshop Elements 11 and Adobe Premiere Elements 11.
I had a trial version of Photoshop Elements 11 and with the code I could access the full version.
However Premiere Elements did not open after installation. I did not had a trial version so I first downloaded the full program. I went through the whole installation process and everything seemed ok, no error messages. But when I tried to open Adobe Premiere Elements after restarting the computer it did not open at all. Nothing happened.
I have de-installed and re-installed the program for a couple of times over and over again but with not result. Also tried to download the trial version first and also this didn't work. I checked my Quicktime and updated to the latest version.
I use a Windows laptop: Asus Intel Core i5-2430M, 2,4 GHz
I hope you can help me out!
Thanks!
IngeYes I saw it but PSE (refers to Photo Shop Elements??) and I have trouble with Premiere Elements..(so the video program)
The Photoshop Elements worked.
I am not sure what to do here also the link at your reply "working with your operation system tools" didn't work..(got the "broken link error")
thanks
Inge -
Hi, Accidentally somebody screw up Photoshop CS4 and InDesign CS4 Master edition on a MAC computer in the school. The install discs did not start to run therefore I can't reinstall the 2 missing programs. I want to install the softwares, therefore I download those from here. The downloaded program refuse to accept the serial number which was given to the school when they purchased the Master Collection CS4 MLP A00. Thank you for your help, in advance.
Hi Jeff,
Thank you. I am a little bit busy at work, sorry for the delayed reply. I tried to solve the problem, but it still exists. The 3rd of the Adobe disk is damaged someway. I tried to run on my mac at home and it has a failure. So I think we have no other choice that to download the full pack of master collection. I had a discussion with the IT expert and he figured out that company does not exist any more from where they purchased the Adobe Master Collection for Mac and PC. So If you would be kind to help me, what kind of information ID or any kind of document would be needed to identify the purchaser institute (us). I don't think any of us has an account at the Adobe. I will try to figur out. I desperately need to replace Photoshop and InDesign as without them it's really harsh to teach the kids fot the graphic design.
Sincerely yours.
Peter -
Question
I am not able to launch FF everytime i try to open it, it says FF has to submit a crash report,and restore yr tabs. I even tried doing that and the report was submitted too, but still FF did not start, and the problem still persists, please help me solve this issue
'''(in English)'''Hi Danny,
Per my understanding that you can't get the expect result by using the expression "=Count(Fields!TICKET_STATUS.Value=4) " to count the the TICKET_STATUS which value is 4, the result will returns the count of all the TICKET_STATUS values(206)
but not 180, right?
I have tested on my local environment and can reproduce the issue, the issue caused by you are using the count() function in the incorrect way, please modify the expression as below and have a test:
=COUNT(IIF(Fields!TICKET_STATUS.Value=4 ,1,Nothing))
or
=SUM(IIF(Fields!TICKET_STATUS=4,1,0))
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support -
Hi
I just now updated dec 2013 c.u to sharepoint server 2010 sp2
I get this error in event viewer when I browse web applications , they not open even
Load control template file /_controltemplates/TaxonomyPicker.ascx failed: Could not load type 'Microsoft.SharePoint.Portal.WebControls.TaxonomyPicker' from assembly 'Microsoft.SharePoint.Portal, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c'.
SharePoint Web Services Round Robin Service Load Balancer Event: EndpointFailure
Process Name: OWSTIMER
Process ID: 3836
AppDomain Name: DefaultDomain
AppDomain ID: 1
Service Application Uri: urn:schemas-microsoft-com:sharepoint:service:548f72e6a39f401e95e92711aea13c45#authority=urn:uuid:9aebe976322541d280e4bd3799fa283f&authority=https://spfwf01:32844/Topology/topology.svc
Active Endpoints: 2
Failed Endpoints:1
Safe mode did not start successfully. This page has encountered a critical error. Contact your system administrator if this problem persists.
adilThis messge I get initially I get two times (1)
SharePoint Web Services Round Robin Service Load Balancer Event: EndpointFailure
Process Name: w3wp
Process ID: 4600
AppDomain Name: /LM/W3SVC/2141356646/ROOT-1-130405218187772398
AppDomain ID: 2
Service Application Uri: urn:schemas-microsoft-com:sharepoint:service:548f72e6a39f401e95e92711aea13c45#authority=urn:uuid:9aebe976322541d280e4bd3799fa283f&authority=https://spfwf01:32844/Topology/topology.svc
Active Endpoints: 2
Failed Endpoints:1
Affected Endpoint: http://spfapp02:32843/548f72e6a39f401e95e92711aea13c45/MetadataWebService.svc
aftert this message three times (2)
The Managed Metadata Service 'Managed Metadata Service' is inaccessible.
and after (3)
The health service has removed some items from the send queue for management group "MOJOmanagement" since it exceeded the maximum allowed size of 15 megabytes.
after (4)
Safe mode did not start successfully. This page has encountered a critical error. Contact your system administrator if this problem persists.
and this time I seen I am unable to browse web applications
and
Load control template file /_controltemplates/TaxonomyPicker.ascx failed: Could not load type 'Microsoft.SharePoint.Portal.WebControls.TaxonomyPicker' from assembly 'Microsoft.SharePoint.Portal, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c'.
adil -
Hi,
I have a MBP 13' Late 2011 and Yosemite 10.10.2 (14C1514).
Until yesterday, I was using Garmin ConnectIQ SDK and all was working fine.
Yesterday, I've updated my system with latest security updates and Xcode updates too (Version 6.2 (6C131e)).
Since, I can't launch the ConnectIQ simulator app, I have this message in console :
8/04/2015 15:19:04,103 mds[38]: There was an error parsing the Info.plist for the bundle at URL Info.plist -- file:///Volumes/Leto/connectiq-sdk-mac-1.1.0_2/ios/ConnectIQ.bundle/
The data couldn’t be read because it isn’t in the correct format.
<CFBasicHash 0x7fa64f44e9a0 [0x7fff7dfc7cf0]>{type = immutable dict, count = 2,
entries =>
0 : <CFString 0x7fff7df92580 [0x7fff7dfc7cf0]>{contents = "NSDebugDescription"} = <CFString 0x7fa64f44f0a0 [0x7fff7dfc7cf0]>{contents = "Unexpected character b at line 1"}
1 : <CFString 0x7fff7df9f5e0 [0x7fff7dfc7cf0]>{contents = "kCFPropertyListOldStyleParsingError"} = Error Domain=NSCocoaErrorDomain Code=3840 "The data couldn’t be read because it isn’t in the correct format." (Conversion of string failed.) UserInfo=0x7fa64f44eda0 {NSDebugDescription=Conversion of string failed.}
I have looked at this file and it looks like a binary plist
bplist00ß^P^V^A^B^C^D^E^F^G^H
^K^L^M^N^O^P^Q^R^S^T^U^V^W^X^Y^Z^[^\^]^^^_ !"$%&'()'+,^[\CFBundleNameWDTXcodeYDTSDKName_^P^XNSHumanReadableCopyrightZDTSDKBuild_^P^YCFBundleDevelopmentRegion_^P^OCFBundleVersi on_^P^SBuildMachineOSBuild^DTPlatformName_^P^SCFBundlePackageType_^P^ZCFBundleShortVersionString_^P^ZCFBundleSupportedPlatforms_^P^]CFBundleInfoDictionaryVersion_^P^RCFBundleE xecutableZDTCompiler_^P^PMinimumOSVersion_^P^RCFBundleIdentifier^UIDeviceFamily_^P^QDTPlatformVersion\DTXcodeBuild_^P^QCFBundleSignature_^P^ODTPlatformBuildYConnectIQT0611[iph oneos8.1o^P-^@C^@o^@p^@y^@r^@i^@g^@h^@t^@ ^@©^@ ^@2^@0^@1^@5^@ ^@G^@a^@r^@m^@i^@n^@.^@ ^@A^@l^@l^@ ^@r^@i^@g^@h^@t^@s^@ ^@r^@e^@s^@e^@r^@v^@e^@d^@.V12B411RenQ1V14C109Xiphoneos TBNDLS1.0¡#XiPhoneOSS6.0YConnectIQ_^P"com.apple.compilers.llvm.clang.1_0S8.1_^P^Tcom.garmin.ConnectIQ¡*^P^AW6A2008aT????^@^H^@7^@D^@L^@V^@q^@|^@<98>^@ª^@À^@Ï^@å^A^B^A^_^A?^AT^ A_^Ar^A<87>^A<96>^Aª^A·^AË^AÝ^Aç^Aì^Aø^BU^B\^B_^Ba^Bh^Bq^Bv^Bz^B|^B<85>^B<89>^B<93>^B¸^B¼^BÓ^BÕ^B×^Bß^@^@^@^@^@^@^B^A^@^@^@^@^@^@^@-^@^@^@^@^@^@^@^@^@^@^@^@^@^@^Bä
I guess it is a normal format but my system seems to be unable to read binary plist ?
I tried some stuff with plutil
plutil -lint Info.plist
Info.plist: Unexpected character b at line 1
Same for convert
plutil -convert xml1 Info.plist
Info.plist: Property List error: Unexpected character b at line 1 / JSON error: JSON text did not start with array or object and option to allow fragments not set.
I also try to download a fresh version of the connectIQ SDK and no changes.
Any idea ?
ThanksStep by step, how did you arrive at seeing this agreement?
Maybe you are looking for
-
Can no longer access my .mac website
I have been using iWeb 06 for that last 18 months to publish a website for our family. I have a current .mac/mobileme account that is set to renew on Jan. 18, and I suddenly can no longer access our website (my mobileme email is working fine). It's a
-
Print texts in different formats on one page
Hi all, Is it possible to print the texts on one page in different fonts and sizes? It seems like PrintTextBuffer prints all the texts onto one page at once and there is no chance to change the format. Thanks, LT Solved! Go to Solution.
-
When I run the Report to print I'm getting the following errors.. REP:0069 Internal Error REP:57054 In-Process Job Terminated - Terminated with error: null But I can export the same report content to HTML page .. Can any body .. have any clues.... Ms
-
How to dial telephone numbers which have letters instead of digits?
I'm new to Blackberry products & just bought a 8330 curve. Unlike my other smartphones which had the option of a dial key pad, the Curve appears to have forgotten to include one. When a telephone number is spelled out with letters instead of digits
-
Pages Not Displaying In Older Versions Of Safari
Several people have told me that my new site does not display in versions 1 or 2 of Safari. It works in Window IE and Firefox and Firefox on the Mac. The Home page will display if they click anywhere on the blank page. Is this an iWeb or .Mac problem