Adobe Premiere 6.5 for PPC users

Afficiendos of Premiere 6.5 will be delighted to hear that after a flash of inspiration I installed and found that Prem 6.5 will work in OS 10.5.8 using Quicktime 7.6.9 on a PPC Mac 2.5 GHz Quad.
After installation I captured a 20 min segment DV movie, edited and exported the clip to both DV PAL and H264 Mpeg 4 without dropping frames.
2 caveats 1/ you still need to replace the two upgrade plugins "DV device control" and HDLR GRAB* and 2/ for some reason the project will not open under it's own merit, you have to open premiere and then open the project from within the application.
Otherwise it flies

Adobe Premiere 6.5 for Windows
I've never used that... If you can export as pure digital video do that and inport that file into iDVD. iDVD will compress to DVD MPEG-2.
You could import into iMovie and add chapter markers, etc., and then send to iDVD.
Bottom line: Don't compress out of Premiere.

Similar Messages

Can you do Green Screen/Blue Screen/Chroma Key on Adobe Premiere Elements 12 for mac?

Can you do Green Screen/Blue Screen/Chroma Key on Adobe Premiere Elements 12 for mac? If not, what are the alternatives?

JimbobT
ChromaKey, GreenScreen Key, and BlueScreen Key are not included in Premiere Elements Mac.
Some suggest Videomerge as the alternative. I do not. But Videomerge is not THE alternative.
Instead, I prefer the Difference Matte as a substitute for the 3 absent keying effects. Please check out my blog post on that which includes
the how to.
http://atr935.blogspot.com/2013/05/pe11-difference-matte-as-substitute-for.html
The suggestion has met with good results according to the feedback that I have gotten to this.
I am strictly a Premiere Elements Windows user who does not prefer Videomerge even in Windows.
Please review, consider, and let us know the outcome.
Thanks.
ATR

Final Cut Pro 7 keyboard shortcuts for Adobe Premiere Pro CS5 for Windows

Attached is the file that contains the Final Cut Pro 7 keyboard shortcut set for Adobe Premiere Pro CS5 for Windows.
This file was mistakenly left out of the Premiere Pro CS5 installer, so people who tried to switch to this keyboard shortcut set were unable to do so.
Unzip the file and then install the .kys file by copying it here:
C:\Program Files\Adobe\Adobe Premiere Pro CS5\Keyboard Shortcuts\en_US
(where C:\ may be replaced by the a different volume if you installed somewhere other than the C drive, and en_US may be replaced by another locale ID)
This file was included in the Premiere Pro CS5.5 installer, so manually installing this file is only necessary for Premiere Pro CS5.
For information about keyboard shortcuts, including how to customize them, see this page:
"Keyboard shortcuts"

By the way, Mac users don't need to update this file, it's for Windows users only.

Are the texture presets and images available in Adobe Premiere Pro free for commercial use?

Are the texture presets and images available in Adobe Premiere Pro free for commercial use (in this case, an image of a film reel is being used on a book cover)?

What the other users have said is correct. Premiere captures through FireWire or through SDI/HDMI via a 3rd party solution.
For your situation I would say the best bet is to connect you camera to your computer via USB or use a card reader and copy the entire directory to your hard drive and ingest into Premiere via Media Browser.
If you Google 'how to make stop motion in premiere pro' there are tons of great tutorials.
Best,
Peter Garaway
Adobe
Premiere Pro

How to download Adobe Premiere pro CS5 for windows to my new imac 27 inch

How to download Adobe Premiere pro CS5 for windows to my new imac 27 inch

IMHO Windows would be the place to start.
Why do you want to load CS5 for Windows?
Adobe does produce a version of CS5 that runs on OS X so that it would not be necessary for you to have to screw around with Windows. Personally that would be the way to go and avoid the hassles of Windows.
Allan

How to transfer the content of the video to Adobe Premiere Pro CS3 for editing ?

Hi there,
I have an old video camera that is still working. That video camera uses a Hi 8 tape. The tape is bigger that the current DV tape. The size of the tape is something like a tape cassette.
How to transfer the content of the video to Adobe Premiere Pro CS3 for editing ? Being an old video camera, the output doesn't have any firewire or USB connector. In fact the only output is has is the Yellow, Red & while connector (is this referred to as composite).
So, how do I input this Yellow, Red & White cable into the PC (or rather into Adobe Pro CS3) ?
Any established hardware/convertor to recommend ?
Thanks

Ryan,
For "composite out," only you will need an A-D "bridge" to Capture from that camera. Grass Valley/Canopus offers two really good ones, the ADVC-110 and the ADVC-300. There are others and also PCI A-D capture cards, but the Canopus units get very good reviews.
One other workflow would be to hook your older camera to a digital video camera with passthrough (not all have this and it is being discontinued fairly rapidly in consumer cameras) and then doing the Capture through that digital video camera via FireWire. You will not have Device Control, but can easily start/stop via the mouse and one hand on the switches, or on a remote.
Good luck,
Hunt

While installing Adobe Premiere Elements 10 for Mac my installation encountered errors.

While installing Adobe Premiere Elements 10 for Mac my installation encountered errors. Got about 42% and then crashed with an Exit error Code 7.
The summary says:
DW036: Payload cannot be installed due to dependent operation failure.
I have screengrabs:

This is the correct forum http://forums.adobe.com/community/premiere_elements
And, some information to help with install problems
http://www.adobe.com/support/contact
In the US - Adobe General support 800-833-6687 M-F 5am-7pm Pacific
In the US - Adobe Install Problems 800-642-3623
In the US - Adobe Activation 866-772-3623 Open 24/7
and
New forum for Download & Install & Setup problems
http://forums.adobe.com/community/download_install_setup
Chat http://www.adobe.com/support/download-install/supportinfo/
When you get to the correct forum, provide more information about your computer
These questions below may be for a different product... but the information you need to supply is the same, for the products you use
-http://forums.adobe.com/message/4200840
-http://forums.adobe.com/thread/416679
-http://forums.adobe.com/thread/419406

Troubles downloading my adobe photoshop elements 11 and adobe premiere elements 11 for mac os

no dvd drive trying to download my adobe photoshop elements 11 and adobe premiere elements 11 for mac os

You can download thru the following web pages:
PSE 10, 11 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
PE 10, 11 - http://helpx.adobe.com/premiere-elements/kb/premiere-elements-10-11-downloads.html

How can I down a Adobe Premiere Pro CS6 for mac on a computer with windows7 system?

How can I down a Adobe Premiere Pro CS6 for mac on a computer with windows7 system?
Explanations with pics will be better.
Thanks.

Not sure what you are asking. A download is a download. what you do with the file afterwards is entirely up to you. If you mean to install Mac software on Win, then no, this can't be done. Furthermore you also would have to have a proper Win serial.
Order an Adobe product platform swap or language swap
Mylenium

Adobe Premiere CS5 and Open Directory users - Premiere fails to start

We have several class rooms with desktops that are configured for Open Directory.
When a student logs in he's actually working in his home folder on the server and his user is also managed by the server.
This works fine for all the applications that we're using except for Adobe Premiere CS5 and Adobe After Effects CS5. Whenever a student tries to start one of them the application will hang and only a force quit can stop it. It is impossible to start these applications.
However, it is possible to use Premiere and After Effects using a local standard on the desktops. But I don't want to go that route. I want the managed users to be able to use those applications.
Has anyone found a solution for this?
Are you able to use this applications in a same environment?
I've played a lot with the permissions on the library, system and Adobe folders, but the problem doesn't seem to be related to them.
Setup:
AFP Server: Xserve intel running Mac OS X Server 10.6.5
OD Servers: Mac Mini Servers running Mac OS X Server 10.6.5
Clients: iMacs intel running Mac OS X 10.6.6

Safe Mode disables a lot of drivers and services, like networking. That would seem to indicate that something is running on your system that interferes somehow.
I'm just not sure how you'd go about tracking that down.

Dvd Menu Adobe Premiere Elements 10 for Mac with bad resolution

Hi, I use a MacBookPro with Mac OS X 10.6.8 - Intel Core i5 2,4 GH - RAM 4 GB.
I just purchased PRE 10 version hoping to solve a problem I had with version 9 for Mac but not with a version 7 for Win.
I
My problem is that when I burn the dvd with the final work in PAL system, the menu of the DVD has the text very blurred at a very bad resolution.
I searched this forum and I didn't found a similar problem for Mac user.
I had the same problem with PRE 9.
Same problem if I insert a logo in the corner of the video. Very bad resolution image in the final dvd.
I tried to change the beginning resolution of the image from very low to very high and the result was the same.
Someone has similar problems? Someone did find a way to solve it?

Dear Bill, many thanks for your answer.
This is the Project Preset chosen.
As the source is a JVC Everio with hard disk, I chose PAL - Hard Disk - Widescreen 48 KHz
The source is as I said a JVC Everio in SD size. I saved the files in a backup Hard Disk. They are .mod files.
I don't know how to see if a Menu Sets is HD or SD. I tried almost all the available Menu Sets always with the same blurry results.
These images explain better than words.
Note that the firt image in the DVD Menu is perfect, not blurry. And this add a little bit of mystery :-)
this is the scene selection that has text blurry
And this is the logo I put in the right bottom side of the video. It is blurry. I put a high resolution image and it was blurry. Then I tried with an image .png with the same width of the video (720 pixels) and this is the same blurry effect:
The solution I use in these days to have goog results is very time expensive.
I make the editing work in my mac, without logo and menu. I make a dvd. Then I import the VIDEO_TS folder in my old pc, with my old version of Adobe Premiere 7.0. I insert the logo, I make the menu and then I make a dvd with my old PC and the resolution is the one I want.
Obviolusly I'd like to do all the work in my Mac...
The same problems and solution I used also with PRE 9.0
By the way, I'm using Adobe Premiere Elements in my Mac instead iMovie because I need to do videos longer than 2 hours. And iMovie has this limit.
Many thanks in advance for help. There is someone that is using Mac and PRE 10 with GOOD results?

Adobe Premiere Elements plugin for fisheye/barrel distortion correction

I want to correct the fisheye/barrel lens distortion in a GoPro MP4 video recording. Can Adobe Premiere Elements do this (I've searched for such a function in my APE 11 without success) or is there a plugin which will do this and which is compatible with APE 11 ?

That is good news, and for $49, sounds like a deal. ProDAD does some nice applications and plug-ins, but I had not heard of that one - learned something new.
I was going to mention Alien Skin (also do some neat plug-ins), as they have/had a similar "lens distortion" module in their lineup. However, I did not see PrE listed as a host application, so held off. Most of their plug-ins work in Photoshop, Premiere Pro and After Effects. We see similar with plug-ins from Red Giant and Boris, where PrE is not a viable host app. Not sure why not, but it must be in the numbers - both user-bases and $, as Boris & RG plug-ins often cost 3x what PrE does.
It's also great that the ProDAD plug-in offers some stabilization - probably a bit of their Mecalli stabilizer is built-in - you get a "twofer!"
Thanks for that info, and happy editing,
Hunt

Need help with Adobe Premiere Elements 9 for the Windows XP PC

Just got it today, so I could make my own video and audio files from pre-existing ones. I first used a version of Adobe Premiere back in school in the '90s, and seemed to easily make them there, while not working on school work. There was a row for inserted video, and a row below that for inserted audio. I'm out of college currently, and just bought Elements 9, as said, but am struggling with it. Could someone please tutor me to get me started? Perhaps even talk over the phone? I'm trying to combine different video and audio tracks into a new singular video/audio file.
Thanks in advance.
>>
Welcome to the forum, but unfortunately, you have posted to the Premiere Pro, CS 4 and Earlier forum.
Instead, you should post to the PrElements Forum, as few here will know anything about PrE 9.
Now, the starting secret of PrE is your Source Files. Can you tell us the full details of those?
Next, matching those to the correct Project Preset, is the next step. Can you tell us what you chose at New Project?
For a list of some of the resources for learning PrE, see this ARTICLE.
Good luck,
Hunt
>>
What are Source Files? You mean the videos I'm using? The main one is here:
http://www.tfarchive.com/cartoons/videoclips/bones.php
Two to four additions to it will be used with video parts from here:
http://www.tfarchive.com/cartoons/videoclips/us_commercials.php
And my first project is a .prel file. Is that what you meant?
Is it possible I could get assistance over the phone?
Thanks.

I created a more precise list of what I wish to combine to make one new video program:
Audio:
http://www.tfarchive.com/cartoons/videoclips/bones.php
Transformers_S2.mpg (0:00 - 0:33) (All)
Video:
http://www.tfarchive.com/cartoons/videoclips/bones.php
Transformers_S2.mpg (0:00 - 0:08)
Fade to
Transformers_S2.mpg (0:31 - 0:33)
Fade to
http://www.tfarchive.com/cartoons/videoclips/us_commercials.php
Rodimus.mpg (0:00- 0:08) (Note: Should start after grey jet passes by on top of screen (less than a second in), and stop after blue robot tramples over the other two robots, cutting off the part where he's shot at from the sky, and all that afterward.)
http://www.youtube.com/watch?v=5yd1OmZvU8w
(1:34 - 1:38) (Note: Should start as soon as video beings, and end when the four side robots are shooting their laser guns, and the one in the middle shoots his shoulder-cannons, cutting off the part with the bridge and missiles, and everything else afterward.)
http://www.tfarchive.com/cartoons/videoclips/us_commercials.php
trypt.mpg (0:15 - 0:16) (Note: Only shows the brief second or two where the five robots quickly transform to one big robot.)
http://www.youtube.com/watch?v=h23kRJ9i058
(5:22 - 5:25) (Note: Should start with all 5 robots appearing onscreen, and end with them, in a combined robot, firing at the screen, cutting off the white laser-shooting base/battle-station and everything else afterward.)
http://www.tfarchive.com/cartoons/videoclips/bones.php
Transformers_S2.mpg (0:23 - 0:33) (Note: Should start with lava-flowing ending, and lined-walkway appears, and goes to the end.)
Not sure if I can get all of these videos in, in the 33 second time limit. I'm willing to cut either the trypt.mpg clip, and/or the youtube link-clip below it.
I have a youtube downloader program, so no worries there. Also need to know how to cut video so I can make these clips that are from youtube and tfarchive.
I also want the video to contain the same quality as shown from each file here, and all fit the size of the largest file (the youtube one, I think it is).
Please LMK how to do this, and if any of this is unclear. Things like this are all I really want to use APE9 for, so I won't be asking much else here.
Thanks.

Adobe Premiere Pro CS5 for Mac problem

I have recently bought Adobe Premiere Pro CS5 as an upgrade (for Mac) and after I enter the serial number during installation it asks me for a serial number of a qualifying product, listing three: Premiere Elements 4, 7 or 8. I only have Premiere Elements 9. I would be happy to buy the aforementioned products except several sources suggest that PE8 was never produced for Mac. Any ideas of what I can do?

Return it. CS5 has not been sold for more than 1 year. Instead get CS6.

Adobe Premiere Pro CS5 for Mac-installation problem

I have recently bought Adobe Premiere Pro CS5 as an upgrade (for Mac) and after I enter the serial number during installation it asks me for a serial number of a qualifying product, listing three: Premiere Elements 4, 7 or 8. I only have Premiere Elements 9. I would be happy to buy the aforementioned products except several sources suggest that PE8 was never produced for Mac. Any ideas of what I can do?

Get in touch with support and they'll guide you through teh steps and provide the necessary codes.
Mylenium

Adobe Premiere 6.5 for PPC users

Similar Messages

Maybe you are looking for