Adobe premiere 9 fuzzy video
I open Adobe premiere 9 and when i import my video into it, and put the video onto my timeline it becomes very fuzzy. I am using an Everio Camcord. The videos are fine on imovie, but not in premiere? any help- Mac osx 10.9.2
TrStudios
Thank you for the reply.
No matter how many tutorials you read, you are still going to know basic information about what you are importing into the project, how you are editing, and how you are exporting it.
The start should be to know and use the properties of what you are importing into the project. As I asked before:
What are the properties of your source media
Video compression
Audio compression
Frame Size
Frame Rate
Interlaced or Progressive
File Extension
Pixel Aspect Ratio
If you do not know, a start would be to tell us the brand/model/camera settings of the camera used to record the video and/or photos.
If it got more complicated than that and be needed deeper information, you could download and install video properties readout programs such as MediaInfo http://mediainfo-mac.en.softonic.com/mac
But, it may not need to get to that. We will do one step at a time.
But please understand, since you come with a problem involving fuzzy video, there are all important aspects of trying to get to the core of the problem.
After we determine the properties of the videos that you want to edit, we assure that you are using the right project settings. Those settings should match the properties of the video. So, here we are back at wanting to know the properties of the source video.
If you hve the right project settings and you follow with import of your video, then we go into the next phase of troubleshooting in the Edit area. That will involved rendered vs unrendered content and what the playback of that content looks like in the Edit area monitor.
But, for now, I would like to confine your focus to the source media and getting it into your Premiere Elements 9.0/9.0.1 project with the right project preset. So put on hold thoughts of the Editing area.
Please review and then let us know if you are OK with the details and goals. Once we have this basic information, I will customize a step by step for you on how to get through a project that you want to do.
Thank you.
ATR
Add On...For an detailed overview of Premiere Elements 9, please refer to its Help PDF file
http://help.adobe.com/archive/en_US/premiereelements/9/premiereelements_9_help.pdf
Similar Messages
-
Adobe premiere Elements 12 video and audio problems
When ever I import a video that was recorded with bandicam both the audio and video are terrible, the video is 360 p and the audio is static. I just bought Adobe premiere yesterday and already having issues. If anyone can help it is greatly appreciated.
The format for the video is: MPEG-1
The audio is: MPEG-1 L2Bandicam read #10 http://forums.adobe.com/thread/954394
-
Adobe Premiere Elements 12 video preview choppy
Preview video in Adobe Premiere Elements 12 is choppy and I'm unable to edit with this program. I transfered the video from a DSLR to my hard drive and then added the video from the hard drive to Adobe Premiere Elements. I don't have the same problem editing with Windows Movie Maker. I'm using a Dell Studio 15 laptop with Intel 2-core processor, 4 GB RAM and 500 GB HD. I imported video from the laptop and an external 3 TB HD. I also tried adding clips directly from the camera - a Canon EOS 70D - and it's still choppy and impossible to edit.
>meet the requirements for Adobe Premiere Elements
There have been MANY discussions here, and in the Premiere Pro forum, about Adobe's requirements
The general concensus HERE is that the Adobe marketing people want more people to buy the program, so they list MINIMUM requirements, not EFFECTIVE EDITING requirements
In the PPro area, but This message has a really good picture showing requirements
Click the picture to expand to readable size - http://forums.adobe.com/thread/810750 -
Can't start Adobe Premiere Elements 13 video editor.
It says: "Adobe Premiere Elements 13 has stopped working" without additional details. It doesn't close, it is not frozen, but it does not work.
I tried Adobe Premiere Elements 12 (trial version) which had no problem at all on my PC. I'm using the 64 bit version on Windows 7. I've tried to re-start the pc, to uninstall PRE 12, but this does not work. I have access to the Organizer though. Has anyone manages to get PRE 13 installed?chti_gaby
Thanks for your follow ups.
Let us focus on Premiere Elements 13 Windows 7 64 bit computer.
Let go through the usual drill questions...
a. Does problem exist with and without the antivirus and firewall(s) disabled? Is your antivirus program McAfee?
b. Are you running the program from a User Account with Administrative Privileges and have also selected and applied Run
As Administrator to the desktop icon of the program?
c. Do you have the latest version of QuickTime installed on your computer.
d. Can you open the program using the Adobe Premiere Elements.exe file instead of the Adobe Premiere Elements 13.exe?
See Local Disk C\Program Files\Adobe\Adobe Premiere Elements 13\
Please consider
a. Go to Control Panel/Programs and assure that Adobe Premiere Elements 12 and 13 are not showing as installed programs.
If they are, uninstall.
b. Do a free ccleaner run through (regular and registry parts) to get rid of any leftovers from incomplete installs or uninstalls.
https://www.piriform.com/ccleaner/download
c. Reinstall Premiere Elements 13 with antivirus and firewall(s) disabled.
The following is what was helpful for me when I ran into problems with Photoshop Elements 12 and Premiere Elements 12 installs.
ATR Premiere Elements Troubleshooting: PE12: Premiere Elements 12 Editor Will Not Open
Depending on how the troubleshooting is progressing, you may want to consider exploring these possibilities.
We could get into video card/graphics card, etc, but your comments on your initial experience with the Premiere Elements 12 tryout
make me hesitate on exploring that aspect of the troubleshooting now.
Please review the above and then we can decide on the next course of action.
Contacting Adobe via its Adobe Chat is a possibility since you have a purchased version of the current version (13), but let us see
what we can do.
Thanks.
ATR -
Adobe premiere stopped importing video
I haven't used my Adobe Premiere Pro CS5 for several months. I used it the other day to capture video and then when I tried to import it into a new project it I saw no indication that it actually did it. The screen format seems to look different too with only one monitor to view the video and not two. Nothing shows up on the left side bar with the imported video although it seems to go through the action of importing without any notices coming up to say that it isn't working. Has anyone had this happen or know how to resolve the issue? I have some projects I really need to edit and I can't get it working. Thanks so much!
You need to create a sequence; the Timeline panel is what hold a sequence, but it's not the sequence itself. Create a new sequence by going to File > New > Sequence and choosing a preset that matches your footage, or by dragging one of your footage items to the New Item button at the bottom of the Project Panel. That process will create a new sequence that matches your footage parameters and will drop the clip into it; you can add other clips and edit as you like then.
-
Does Adobe Premiere Elements Have Video Description & Editing Feature?
Dear Adobe Fans,
Can any Adobe users with experience using Adobe Premiere Elements tell me if you can add descriptions, view or add location metadata to video files? I cannot find a decent place other than my iPhoto library to store movie files and add this kind of information. Sadly, iPhoto cannot be used to import any kind of movie.
I am looking for an alternative video editing app to iMovie. I was wondering if Adobe have video descriptions information. I'd like the ability to add descriptions to my videos like in iPhoto.
Many thanks,
DanielDaniel
Supplemental contribution...
Please see Elements Organizer 13/13.1 Help PDF
https://helpx.adobe.com/pdf/elements-organizer_reference.pdf
Chapter 6
Adding Metadata
pages 102 to 117
If there is any consideration for seeing or adding comments about source media within a project....
please check out Premiere Elements Expert workspace Project Assets/Panel Options/View with List and columns of information (can add to columns by right clicking blank space and selecting Edit Columns)....used to be you could add comments there, but no more that I have found
Also, see Markers/Timeline Marker/Set Timeline Marker/Unnumbered
After unnumbered marker is placed at the position of the Timeline Indicator, double click the Timeline unnumbered marker to obtain Marker dialog for comments/info.
I am strictly an Elements Windows user, so I am assuming that the features mentioned are in Premiere Elements Mac as well since I do not see any Windows Only notation for them.
ATR -
Adobe Premiere Basics Creating Video Publishing and Adding advertisments within the video.
Hi I am new to Adobe Premiere and have some basic questions I have a video that I would like to mix sound into and also add a flash advertisment in but am having problems previewing the movie in perfect quality. For example, when I drag my imported video in, the movie gets much smaller when I preview it. Even after I get some of the sequences finished and I export it, the video looks small.
I think this is something in the publishing or importing features that I don't know of, basically how do I work on my video and create parts to it while keeping the quality of the video 100%
My second question is, I have created a simple fade in fade out advertisment that I would like to go in the bottom right part of the video, how do i position it exactly there?
thanks pros!1 - See 2nd post for picture of NEW ITEM process http://forums.adobe.com/thread/872666?tstart=0
2 - Read about PIP = Picture in Picture
CS5 User Guides - online and PDF (see link in upper right corner at individual pages)
http://blogs.adobe.com/premiereprotraining/2010/08/help-documents-for-creative-suite-5-pdf -and-html.html -
Adobe premiere Pro Cs6 video saccadé
Bonjours à tous ! Débutant en la matière je solicite votre aide pour m'éclairer, donc voila, sur adobe premiere pro Cs6 je voudrais faire un montage a l'aide de videos (format MOV.) prise avec un Canon 650d mais il y a un hic lorsque je transfert mes videos et que je tente de les lire, elles lag, très saccadé que ce sois dans "source" ou dans l'outil qui permet la pré-visualisation ... donc le disque de travail a 85 go, et je voulais aussi savoir quel type de préconfiguration devrais-je choisir sachant que la largeur de la trame = 1920 et la hauteur = 1088, et que la frequence d'images est de 25 trames/s, Merci d'avance pour votre aide
D'accord je vois, et merci de ton aide,
mon processeur : Intel(R) Pentium(R) CPU B950 @ 2.10GHz
Mémoire installé (RAM) 4,00 Go
sous windows 7 et ma carte vidéo est Intel HD Graphics family
j'ai aussi tenté de convertir la video dans un autre format que MOV. car j'ai vu pas mal de problémes similaires avec ce format et en Mpeg sa ne saccade plus mais il y a une grande perte de qualité j'en ai deduis que c'est au niveau des paramètre de sortie de conversio, et le seul réglage qui me pose probleme est le Taux (Kb/s) en allant dans les propriétés des vidéos que je veux convertir il y a des taux variant de 48000 à 49000 je ne sais donc pas vraiment quoi mettre ... -
Adobe Premiere Pro CS5 Video Codec + with 60d
Hi all at Adobe.com forums,
I have been actively using Adobe After Effects, as well as Premiere Pro to import my video and subsequently alter the footage to my liking. My question is this...
-When you export any of the footage (from the native .mov format on the Canon 60d), I want to retain as much image quality as possible, but keep the file size to an appropriate margin where I can edit the altered footage for future use. I currently use Quicktime Animation - but the file sizes are too large. This causes hang-ups while editing, as well as leaving a mammoth footprint on my HD.
What settings do you use when rendering video? What are the optimal settings?
cwakelyretain as much image quality as possible, but keep the file size to an appropriate margin
Those two goals are mutually exclusive. Keeping the file size down means compression, and that reduces quality. Keeping the quality means no or lossless compression, and that requires lots and lots of bits. -
Adobe Premiere Elements 10 Video Freezes After One Frame
Hi, so my Adobe product worked PERFECT for about a year now, then all of a sudden it just broke, When I put a file into it, it shows the First Frame and Freezes, the Audio plays as if the Video was showing, but the Video is just frozen. I don't know how to fix it, I've uninstalled and re-installed it, but nothing is helping.
Gameman625
What computer operating system is your Premiere Elements 10 running on, and what video card/graphics card
does your computer use? NVIDIA GeForce?
If so, please read the Announcement at the top of this forum regarding the Premiere Elements 10/NVIDIA issue
which forces the Premiere Elements 10 user to roll back the driver version to about May 2013 in order to get
Premiere Elements 10 to function properly. For your convenience, the following is a copy/paste of that
Announcement which describes the problem, gives how to information, and all the necessary details.
Premiere Elements 10 NVIDIA Video Card Driver Roll Back
If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you
are experiencing Premiere Elements 10 display and/or unexplained program behavior, then your first line of
troubleshooting needs to be rolling back the video card driver version instead of assuring that it is up to date.
Since October 2013 to the present, there have been a growing number of reports about display and unexplained
workflow glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce
video card. If this applies to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card
driver as far as is necessary to get rid of the problems. The typical driver roll back has gone back as far as
March – July 2013 in order to get a working Premiere Elements 10. Neither NVIDIA nor Adobe has taken any
corrective action in this regard to date, and none is expected moving forward.
Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
http://forums.adobe.com/thread/1317675
Older NVIDIA GeForce drivers can be found
http://www.nvidia.com/Download/Find.aspx?lang=en-us
A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the
driver roll back can be found
http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
Once we have the video card/graphics card driver matter ruled in or out, we can decide what next if indicated.
More questions will follow including
a. Do you have the latest version of QuickTime installed on your computer along with Premiere Elements 10?
b. Are you running the program from a User Account with Administrative Privileges?
c. Does the problem exist with or without the antivirus and firewall(s) disabled?
Looking forward to your follow up.
Thank you.
ATR -
Adobe Premiere Pro CS6 Video Playback Problem/Bug
I have been editing a video for the past few weeks, but recently, after I have been editing for a few minutes, all of a sudden my video won't play in the playback window. When I hit the play button (or the space bar) it does nothing - just sits there. All of the clips are rendered (with the green bar), but I cant see my changes because it doesn't play. I am even able to move the cursor along the timeline and it will show the video in the playback window, but it won't play back in real time. Like I said I have been using Premiere Pro CS6 for a while and havent had this problem until now. Also, when I drag a clip into the preview window, it doesn't play either (but I am able to move the cursor along the timeline). I have to shut down Premiere and open it up again, then it works for a few minutes again, and then the same problem occurs. Please help! The specs for my lap top are as follows: Macbook Pro Retina Display, 2.6 GHZ i7, 16GB RAM, 500GB SSD
Do you ONLY have that single 500gig drive?
If yes, you are below specification... which requires a separate drive for video files
An EXAMPLE concerning trying to use only ONE Hard Drive for Video Editing
You are a music conductor, with a baton that you use to point to various parts of the
orchestra... this is like Windows pointing to various parts of the hard drive to do
Windows housekeeping or to load program segments for various functions
Now, at the same time and with the same hand... while still using the baton to conduct
the orchestra... pick up a bow and play a fiddle... this would be doing something with
your video file at the same time as all the other work
You as a person cannot do both at the same time with the same hand
A computer is a LITTLE better, in that it can switch from one kind of task to another
very quickly... but not quickly enough for EASY video editing
You need AT LEAST two hard drives (separate drives, never a partition
http://forums.adobe.com/thread/650708 for more on partitions) with Windows (or Mac OS)
and software on your boot drive, and video files on a 2nd drive so the boot drive is
not slowed down by trying to do everything
Do not try to use a USB2 external drive for video editing, the USB2 file transfer speed
is too slow
External eSata or USB3 are both fast enough for video editing... eSata is better -
http://forums.adobe.com/thread/1117813
ONE possibility is this dock http://www.amazon.com/StarTech-SuperSpeed-Docking-Station-Cooling/dp/B0055PL2YI -
Adobe premiere elements 12 video is slow and does not match sound
after uploading the clip to edit into premiere elements 12 the video clip is slow, it doesnt match with the sound which is on point, when played back the video is choppy and skips a few clips, how to fix this please? this makes me reconsider actually buying this program, this does not happen with windows movie maker.
lingling1234
Could you please review the following and determine if you have been there and done the following.
At the onset, have you assure that you have the latest version of QuickTime installed on your computer with Premeire Elements 12?
If you go to Edit Menu/Preferences/Scratch Disks, where do you have the categories directed and how much free hard drive space is there?
Assuring project is set so that project preset (project settings) match properties of source media....
Open Premiere Elements 12 to its Expert workspace.
Go to File Menu/New/Project and Change Settings.
In the Change Settings area, change the project preset to
NTSC
DSLR
1080p
DSLR 1080p@ 29.97
Before you exit that area (in the last dialog that you see - new project dialog), make sure that you have a check mark next to "Force Selected Project Setting on This Project".
Back in the Expert workspace,
a. If you attach your camera to the computer with USB, the select Add Media/Videos from Flip or Camera/Video Importer.
In the Video Importer Source: locate your camera. Set the Save In:, put a check mark next to the videos you want imported, select the choice Add to Timeline, then hit Get Media.That should put your video in Project Assets as well as on the Timeline.
b. If you have your files saved to the computer hard drive, then use Add Media/Files and Folders to get you video into Premiere Elements Project Assets from where you drag your video to the Timeline.
Either way, do you see an orange line over the Timeline content (I am not talking about the orange line that runs horizontally through the clip). Hit the Enter key. Does the Timeline content play back in the Edit area monitor or does a Render dialog pop up? What does the playback look like and sound like in either case? Is anything improved at this point from what you were getting before?
If same as same as with the above, there would be series of questions about your computer environment.
We look forward to your results if you get a chance.
Thanks.
ATR -
Hello,
I've had great success using this forum in the past and was wondering if someone could help me out. I save my logo images for my video as transparent PNG at 72 DPI (because i read an article that stated that 72 dpi was good) in Illustrator for my Premiere-edited videos, but they seem pixelated. See example at
Can anyone tell me the best way to save it so that it is more crisp.XonoBoom,
With PrPro, you CAN Import Layered PSD's. You will be given two choices, when you do: Import as Footage, with the Layers Flattened (the term for merging all Layers into one), or as a Sequence. Now, the latter has slightly different results, so you will want to explore this a bit more closely, and the Help File will be, well "helpful." The Layered PSD will come in as a Sequence, and in a Bin. The Bin will need to be twirled open, and from there, one can do all sorts of operations, such as Nest that Sequence into another, but for what I do (and what you might wish to do), you can just click+drag each Layer (they appear separately in the Project Panel), to Video Tracks, where they can be used in their order of creation, or can be moved about, as is required. One can add Effects, or adjust the Fixed Effects, such as Opacity, to each Layer individually. I do this for a lot of Titles, and just create those Images with Layers in PS. A little planning is required, in that creation, but once you get the hang of it, it will become second-nature.
A variation from PS is the Layer Comp, which is useful for intricate animation. That "variation" is on the PS end of the process/workflow.
Good luck, and if you do much work with graphics into your Video, I think that you will save a lot of time, plus have so many creative doors opened to you. Just spend a little time looking over the Import PSD as a Sequence, so you will understand what you are getting, what you are seeing and how to handle it. Many are not initially expecting a real Sequence, and worry about what to do with that.
Hunt -
Adobe Premiere Elements 8-Video nach verteilen hat ränder?
Hi@all,
habe ein Problem mit Adobe elements 8, warum wird das Video nach ausgabe ( verteilen ->PC, mpeg - egal welches man auswählt, und avi auch) dann bei der wiedergabe mit vlc oder windows media player, bei vollbild links und rechts mit rand versehen. habe das video im editor auf framgröße skallieren eingestellt, sonst ja beschnitten wird. sogar wenn ich das video einfüge und ohne bearbeitung verteile wirds mit rand versehen, hier ein beispiel
http://www.yourfilehost.com/media.php?cat=video&file=mit_rand.flvHallo Turican-Ra,
Erst mal musst du in PRE unter Organisieren auf Projekt klicken und danndie Datei(en) auswählen.
Hier siehst du alle Formate, die du exportieren kannst (wenn dein Dateityp nicht dabei ist funktioniert es nicht).
Viele Grüße
ElementsUser
PS: Mach doch beim nächsten Mal eine neue Diskussion auf. Dann können andere User deine Frage auch beantworten. -
Adobe Premiere CS6 .mts Video Playback Problem
Adobe Play Back Problem
I have around 2 hours of footage I need to get through for a class assignment. Unfortunately for some reason whenever I try playing back my footage, it plays for a random short amount of time then stops. Ive tried everything to fix it. The footage is in .mts format, but it doesn't make a difference because I tried .mov footage and it still didnt work. Ive even tried the adobe live chat and it still didn't work, they couldn't figure it out.More information needed for someone to help... please click below and provide the requested information
-Information FAQ http://forums.adobe.com/message/4200840
Also, there is a CS6 Bug using "spanned" AVCHD files, but so far I am only filming in short segments (under 4 Gig per file) so do not have the problem described in http://forums.adobe.com/thread/1004369?tstart=0
Finally, make sure you copy from camera to hard drive according to http://forums.adobe.com/thread/1015001?tstart=0
-and http://helpx.adobe.com/premiere-pro/using/transferring-importing-files.html
Maybe you are looking for
-
Slow performance using getBlob(), how can I correct this ?
I have wav files stored in a database that range from 10M - 75M... When I make a JDBC call using ResultSet..ie a rs.getBlob for a large wav file, the performance is terribly slow. How can I improve this ? Is there a way to get the BLob is pieces or s
-
My external hard drive does not show up on my desktop
My external hard drive does not show up on my dest top but, does shows in my Windows (vmware fusion) end although I can't see it ob my desktop but, I can eject it properly like any external drive. I have connected it to my windows and ejected properl
-
Adobe Form Section is Not Showing When Value is Selected from Dropdown List
Hello Experts We have this issue where an ADOBE FORM is embedded in a WEBDYNPRO APPLICATION. When selecting a value from the dropdown field in the ADOBE FORM, some particular section in the ADOBE FORM is not shown. Here's the ADS and NW versions tha
-
The icon appeared when I "grabbed" the top of my iPhoto window to move it across the desktop. I don't want to delete important files, and wonder what I should do about the icon. I am using Time Machine.
-
Deploying weblogic server 9.1 application
Receiving the following error when deploying a weblogic application. Caused by: weblogic.common.resourcepool.ResourceSystemException: The driver oracle.jdbc.OracleDriver does not accept URL "jdbc:oracle:thin:@hostname:1521:DBSID" Can someone explain